Adaptive Cruise Control -> Switching Intelligent Mode On and Off Vehicles With: SYNC 3 for Your Ford Kuga SUV 2020

Adaptive Cruise Control (If Equipped)  
Automatic cancellation can also occur if:  
Note: The speed limit information provided  
by the navigation map data may be  
inaccurate or out of date. See Navigation  
(page 452).  
The lane becomes too wide or too  
narrow.  
The system cannot detect valid lane  
markings.  
Lane markings are crossed.  
Note: The system alerts you if the set speed  
increases beyond the speed limit. See  
Adaptive Cruise Control Indicators (page  
279).  
If the system does not detect a speed limit,  
the vehicle speed remains at the current  
set speed.  
Note: The system disables until the next  
key cycle if your vehicle slows down due to  
driver inactivity twice within a key cycle.  
SWITCHING INTELLIGENT  
MODEONANDOFF-VEHICLES  
WITH: SYNC 3  
You can override the set speed at any time.  
You may need to override or cancel the  
system in certain situations such as  
inclement weather or if an incorrect speed  
is set.  
Note: The system may not detect and read  
speed limit signs with conditional  
information, for example, when a sign is  
flashing, during specific time ranges, or  
when children are present.  
Note: Under certain conditions, the system  
may not adjust the vehicle speed until after  
your vehicle passes the speed limit sign.  
WARNING: You are responsible for  
controlling your vehicle at all times. The  
system is designed to be an aid and does  
not relieve you of your responsibility to  
drive with due care and attention. Failure  
to follow this instruction could result in  
the loss of control of your vehicle,  
personal injury or death.  
1. Press Settings on the touchscreen.  
2. Press Driver Assistance.  
3. Press Cruise Control.  
SWITCHING INTELLIGENT  
MODEONANDOFF-VEHICLES  
WITH: SYNC 2.5  
4. Press Intelligent.  
Changing the Set Speed with  
WARNING: You are responsible for  
controlling your vehicle at all times. The  
system is designed to be an aid and does  
not relieve you of your responsibility to  
drive with due care and attention. Failure  
to follow this instruction could result in  
the loss of control of your vehicle,  
personal injury or death.  
Intelligent Adaptive Cruise Control  
When intelligent mode is on, the system  
adjusts the set speed to the speed limit  
detected by the camera and the speed  
limit information provided by the  
navigation system.  
Note: The set speed adjusts when the  
system detects a different maximum speed  
limit.  
Use the following steps in the information  
display:  
282  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Adaptive Cruise Control(If Equipped)  
Note: Under certain conditions, the system  
may not adjust the vehicle speed until after  
your vehicle passes the speed limit sign.  
Menu Item  
Action  
Driver assist.  
Press the menu  
button.  
ADJUSTING THE SET SPEED  
TOLERANCE-VEHICLESWITH:  
SYNC 3  
You can set a permanent speed tolerance  
that is above or below the detected speed  
limit.  
Cruise control  
Select cruise  
control.  
Mode  
Select mode.  
Normal  
Select the desired  
mode.  
1. Press Settings on the touchscreen.  
2. Press Driver Assistance.  
3. Press Cruise Control.  
Changing the Set Speed with  
Intelligent Adaptive Cruise Control  
When intelligent mode is on, the system  
adjusts the set speed to the speed limit  
detected by the camera and the speed  
limit information provided by the  
navigation system.  
Note: The set speed adjusts when the  
system detects a different maximum speed  
limit.  
4. Press Intelligent.  
5. Press Tolerance.  
6. Use + and - to set the tolerance.  
Note: You cannot set the tolerance more  
than 30 km/h (20 mph) above or below the  
recognized speed.  
Note: The speed limit information provided  
by the navigation map data may be  
inaccurate or out of date. See Navigation  
(page 452).  
Note: The system alerts you if the set speed  
increases beyond the speed limit. See  
Adaptive Cruise Control Indicators (page  
279).  
ADJUSTING THE SET SPEED  
TOLERANCE-VEHICLESWITH:  
SYNC 2.5  
Use the following steps in the information  
display:  
Menu Item  
Action  
If the system does not detect a speed limit,  
the vehicle speed remains at the current  
set speed.  
Driver assist.  
Press the menu  
button.  
You can override the set speed at any time.  
You may need to override or cancel the  
system in certain situations such as  
inclement weather or if an incorrect speed  
is set.  
Note: The system may not detect and read  
speed limit signs with conditional  
information, for example, when a sign is  
flashing, during specific time ranges, or  
when children are present.  
Cruise control  
Select Cruise  
Control.  
Tolerance  
Select Tolerance.  
Use the up and  
down arrows to set  
the tolerance.  
Select the desired  
tolerance.  
283  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing