Automatic High Beam Control (If Equipped)
SWITCHINGAUTOMATICHIGH
OVERRIDING AUTOMATIC
HIGH BEAM CONTROL
BEAM CONTROL ON AND OFF
- VEHICLES WITH: SYNC 2.5
WARNING: The system does not
relieve you of your responsibility to drive
with due care and attention. You may
need to override the system if it does not
turn the high beams on or off.
WARNING: Do not use the system
in poor visibility, for example fog, heavy
rain, spray or snow.
WARNING: The system may not
switch the high beams off if the lights of
oncoming vehicles are hidden by
WARNING: You may need to
override the system when approaching
other road users.
obstacles, for example guard rails.
WARNING: You may need to
override the system during inclement
weather.
WARNING:Inspect and replace the
windshield wiper blades regularly to
make sure the camera sensor has a clear
view. The windshield wiper blades must
be the correct length.
1. Press the menu button on the steering
wheel to enter the information display
main menu.
2. Select Settings.
3. Select Vehicle.
4. Select Lighting.
5. Switch Auto highbeam on or off.
E248603
AUTOMATIC HIGH BEAM
CONTROL INDICATORS
Push the lever away from you to switch
between high beam and low beam.
The indicator illuminates to
confirm when the system is
ready to assist.
89
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
