Get Driving Aids -> Traffic Sign Recognition Vehicles With 4.2 Inch Instrument Cluster Display Screen Guide for Ford Kuga SUV 2020

Driving Aids

If the system malfunctions, a warning lamp

Cross Traffic Alert Indicator

illuminates in the instrument cluster and

a message appears in the information

display. Have your vehicle checked as soon

as possible.

When the system detects an

E268294

approaching vehicle, a tone

sounds, a warning lamp

illuminates in the relevant exterior mirror

and arrows appear in the information

display to show which side the

Note: In exceptional conditions, the system

could alert you, even when there is nothing

in the detection zone, for example a vehicle

passing further away from your vehicle.

approaching vehicle is coming from.

Note: If arrows do not display, a message

appears in the information display.

Cross Traffic Alert Information Messages

Message

Action

Cross traffic alert

Displays instead of indication arrows when the system

detects a vehicle. Check for approaching traffic.

Cross traffic not available Indicates blocked cross traffic alert system sensors. Clean

Sensor blocked See

manual

the sensors. If the message continues to appear, have your

vehicle checked as soon as possible.

Cross traffic malfunction The system has malfunctioned. Have your vehicle checked

as soon as possible.

Cross traffic alert deactiv- Displays if you attach a trailer to your vehicle.

ated Trailer attached

WARNING: The system may not

TRAFFIC SIGN RECOGNITION

operate properly if the sensor is blocked.

- VEHICLES WITH: 4.2 INCH

Keep the windshield free from

INSTRUMENT CLUSTER

obstruction.

DISPLAY SCREEN

The system is designed to detect traffic

signs to inform you of the current speed

Principle of Operation

limit and overtaking regulations. Detected

traffic signs appear in the information

display. The sensor is behind the interior

WARNING: You are responsible for

mirror.

controlling your vehicle at all times. The

system is designed to be an aid and does

not relieve you of your responsibility to

drive with due care and attention. Failure

to follow this instruction could result in

the loss of control of your vehicle,

personal injury or death.

Note: Do not carry out windshield repairs

in the immediate area surrounding the

sensor.

Note: Traffic sign data provided by the

navigation system contains information

integrated to the data carrier release.

303

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Driving Aids

The system detects recognizable traffic

signs, for example:

2. Select Traffic sign recognition.

3. Select Activate Traff. Sign Recog..

4. Select Activate speed warning.

5. Select Speed warning.

•

Speed limit signs.

No overtaking signs.

Speed limit cancellation signs.

No overtaking cancellation signs.

6. Select a setting and press the OK

button.

Note: The system may not detect all traffic

Traffic Sign Recognition System

Display

signs and may incorrectly read signs.

Note: In cold and severe weather conditions

the system may not function. Rain, snow,

spray and large contrasts in lighting can all

prevent the sensor from correctly

functioning.

Note: If your vehicle has a suspension kit

not approved by us, the system may not

correctly function.

Note: Always fit Ford original parts when

replacing headlamp bulbs. Other bulbs may

reduce system performance.

The system turns on when you switch the

ignition on and you cannot switch the

system off.

E132994

The system can display two traffic signs

in parallel.

You can view the status at any time using

the information display.

The system displays recognizable traffic

signs in four stages as follows:

Switching Speed Warning On and

Off

1. All new traffic signs appear brighter

1. Using the information display controls

on the steering wheel, select Driver

assist..

2. Select Traffic sign recognition.

3. Select Activate Traff. Sign Recog..

4. Select Activate speed warning.

5. Switch Overspeed chime on or off.

than the others in the display.

2. After a predetermined time they

display normally.

3. After a predetermined distance they

are greyed out.

4. After another predetermined distance

they are deleted.

If the system detects a supplementary

traffic sign, it displays below the respective

traffic sign. For example, when passing a

reduced speed limit in wet road conditions

sign.

Note: If your vehicle has a navigation

system, stored traffic sign data may

influence the indicated speed limit value.

Setting the Speed Warning

You can set the system speed warning to

alert you when the vehicle speed exceeds

the speed limit recognized by the system

by a certain speed tolerance.

1. Using the information display controls

on the steering wheel, select Driver

assist..

304

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Driving Aids

Traffic Sign Recognition System Messages

Message

Action

Traffic sign recognition

Reduced performance

See manual

The traffic sign data provided by the navigation system is

unavailable due to weak or no signal. Wait for a short period

of time for the signal to improve. If the message continues

to appear, have your vehicle checked as soon as possible.

Note: Traffic sign data provided by the

navigation system contains information

TRAFFIC SIGN RECOGNITION

- VEHICLES WITH: 6.5 INCH

INSTRUMENT CLUSTER

DISPLAY SCREEN/12.3 INCH

INSTRUMENT CLUSTER

DISPLAY SCREEN

integrated to the data carrier release.

The system detects recognizable traffic

signs, for example:

•

Speed limit signs.

No overtaking signs.

Speed limit cancellation signs.

No overtaking cancellation signs.

Principle of Operation

Note: The system may not detect all traffic

signs and may incorrectly read signs.

WARNING: You are responsible for

controlling your vehicle at all times. The

system is designed to be an aid and does

not relieve you of your responsibility to

drive with due care and attention. Failure

to follow this instruction could result in

the loss of control of your vehicle,

personal injury or death.

Note: In cold and severe weather conditions

the system may not function. Rain, snow,

spray and large contrasts in lighting can all

prevent the sensor from correctly

functioning.

Note: If your vehicle has a suspension kit

not approved by us, the system may not

correctly function.

Note: Always fit Ford original parts when

replacing headlamp bulbs. Other bulbs may

reduce system performance.

The system turns on when you switch the

ignition on and you cannot switch the

system off.

WARNING: The system may not

operate properly if the sensor is blocked.

Keep the windshield free from

obstruction.

The system is designed to detect traffic

signs to inform you of the current speed

limit and overtaking regulations. Detected

traffic signs appear in the information

display. The sensor is behind the interior

mirror.

Note: Do not carry out windshield repairs

in the immediate area surrounding the

sensor.

Switching Speed Warning On and

Off

1. Press the menu button on the steering

wheel to enter the information display

main menu.

2. Select Settings.

3. Select Driver assistance.

305

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Driving Aids

4. Select Traffic signs.

The system can display two traffic signs

in parallel.

5. Switch Speed warning on or off.

You can view the status at any time using

Setting the Speed Warning

the information display.

You can set the system speed warning to

alert you when the vehicle speed exceeds

the speed limit recognized by the system

by a certain speed tolerance.

1. Press the menu button on the steering

wheel to enter the information display

main menu.

The system displays recognizable traffic

signs in four stages as follows:

1. All new traffic signs appear brighter

than the others in the display.

2. After a predetermined time they

display normally.

3. After a predetermined distance they

2. Select Settings.

are greyed out.

3. Select Driver assistance.

4. Select Traffic signs.

5. Select Speed warning.

4. After another predetermined distance

they are deleted.

If the system detects a supplementary

traffic sign, it displays below the respective

traffic sign. For example, when passing a

reduced speed limit in wet road conditions

sign.

Note: If your vehicle has a navigation

system, stored traffic sign data may

influence the indicated speed limit value.

6. Select a setting and press the OK

button.

Traffic Sign Recognition System

Display

E132994

Traffic Sign Recognition System Messages

Message

Action

Traffic sign recognition

Reduced performance

See manual

The traffic sign data provided by the navigation system is

unavailable due to weak or no signal. Wait for a short period

of time for the signal to improve. If the message continues

to appear, have your vehicle checked as soon as possible.

306

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Driving Aids -> Traffic Sign Recognition Vehicles With 4.2 Inch Instrument Cluster Display Screen for Your Ford Kuga SUV 2020

Popular Manuals