Keyless Entry -> Keyless Entry Limitations for Your Ford Kuga SUV 2020

Keyless Entry  
2. Select Vehicle.  
3. Select Locks.  
KEYLESSENTRYLIMITATIONS  
4. Switch KeyFree on or off.  
SWITCHING KEYLESS ENTRY ON  
AND OFF - VEHICLES WITH: 6.5  
INCH INSTRUMENT CLUSTER  
DISPLAY SCREEN/12.3 INCH  
INSTRUMENT CLUSTER DISPLAY  
SCREEN  
Use the touchscreen to select the  
following:  
1. Select Settings.  
2. Select Vehicle.  
3. Select Locks.  
E78276  
A valid passive key must be within one of  
the three external detection ranges. These  
are approximately 1.5 m (5 ft) from the  
front door handles and the liftgate.  
4. Select KeyFree.  
5. Press and hold the OK button until a  
confirmation message appears in the  
information display.  
The system could not function if:  
The passive key remains stationary for  
REPROGRAMMING THE  
UNLOCKING FUNCTION -  
VEHICLES WITH: 4.2 INCH  
INSTRUMENT CLUSTER DISPLAY  
SCREEN  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
about a minute.  
The vehicle battery has no charge.  
The passive key battery has no charge.  
The passive key frequencies are  
jammed.  
The passive key is too close to metal  
objects or electronic devices, for  
example keys or a cell phone.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
KEYLESS ENTRY SETTINGS  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
SWITCHING KEYLESS ENTRY ON  
AND OFF - VEHICLES WITH: 4.2  
INCH INSTRUMENT CLUSTER  
DISPLAY SCREEN  
Use the touchscreen to select the  
following:  
If you open any other door first, all  
1. Select Settings.  
other doors and the liftgate unlock.  
60  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Keyless Entry  
You can change between the unlocking  
LOCKING AND UNLOCKING  
THE DOORS USING KEYLESS  
ENTRY  
modes in the information display.  
1. Using the information display controls  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Locks.  
UNLOCKING THE DOORS  
Unlock sensors are on the back of the  
exterior front door handles.  
4. Select Unlocking.  
5. Select All doors or Driver's door.  
REPROGRAMMING THE  
UNLOCKING FUNCTION -  
VEHICLES WITH: 6.5 INCH  
INSTRUMENT CLUSTER DISPLAY  
SCREEN/12.3INCHINSTRUMENT  
CLUSTER DISPLAY SCREEN  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
E248553  
Touch the unlock sensor to unlock your  
vehicle and disarm the alarm. The  
direction indicators flash. Do not touch the  
lock sensor on the top of the door handle.  
Keep the door handle clean to make sure  
the system correctly operates.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
After unlocking the doors with the unlock  
sensor, there is a brief delay before you can  
lock your vehicle. When the delay period  
is over, you can lock the doors again,  
provided the passive key is within the  
respective detection range.  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
LOCKING THE DOORS  
Lock sensors are on the top of the exterior  
front door handles.  
If you open any other door first, all  
other doors and the liftgate unlock.  
You can change between the unlocking  
modes in the information display.  
Use the touchscreen to select the  
following:  
E248554  
1. Select Settings.  
Touch a lock sensor once to lock your  
vehicle and arm the alarm. The direction  
indicators flash.  
2. Select Vehicle.  
3. Select Locks.  
4. Select Unlocking.  
5. Select All doors or Driver's door.  
Keep the door handle clean to make sure  
the system correctly operates.  
61  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing