Get Maintenance -> Changing a Bulb Guide for Ford Kuga SUV 2020

Maintenance

Note: Handle a halogen headlamp bulb

Rear Window Wiper Blade

carefully and keep out of children’s reach.

Grasp the bulb by only its plastic base and

do not touch the glass. The oil from your

hand could cause the bulb to break the next

time you operate the headlamps.

Note: If you accidentally touch the bulb,

clean it with rubbing alcohol before using it.

Headlamp

E271380

1. Lift the wiper arm.

E307881

Note: Do not hold the wiper blade when

lifting the wiper arm.

Park/Turn lamp

High beam headlamp

Low beam headlamp

Note: Make sure that the wiper arm does

not spring back against the glass when the

wiper blade is not attached.

2. Remove the wiper blade.

High beam headlamp

Note: Make sure that the wiper blade locks

into place.

CHANGING A BULB

Replacing Headlamp Bulbs

WARNING: Make sure the bulbs

have cooled down before removing

them. Failure to follow this warning could

result in serious personal injury.

E307882

1. Remove service cap.

381

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Maintenance

2. Remove the bulb from the headlamp

1. Remove service cap, if applicable.

assembly by turning it

counterclockwise, then pull it straight

out.

2. Remove bulb from the headlamp

assembly by turning it

counterclockwise, then pull it straight

out.

3. Disconnect the electrical connector.

4. To install, reverse the removal

3. Disconnect the electrical connector.

procedure.

4. To install, reverse the removal

procedure.

Low beam headlamp

LED Bulbs (If Equipped)

LED lamps are not serviceable items. See

an authorized dealer if they fail.

Replacing Fog Lamp Bulbs

1. If you are replacing the driver side bulb,

turn the steering wheel all the way to

the right. If you are replacing the

passenger side bulb, turn the steering

wheel all the way to the left.

E307883

1. Remove service cap.

2. Disconnect the electrical connector.

3. Remove the bulb from the headlamp

assembly by turning it

counterclockwise, then pull it straight

out.

4. To install, reverse the removal

procedure.

Park/Turn lamp

E311716

2. Remove the six lower splash shield

push pins and pull the splash shield

back.

E307884

382

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Maintenance

E311715

E307886

3. Disconnect the bulb electrical

connector.

1. Make sure the headlamp control is in

the off position and open the liftgate.

4. To remove the bulb from the headlamp

assembly, turn it counterclockwise,

then pull it straight out.

2. Remove the bolt cover using a

standard flat tip screwdriver.

3. Remove the bolt from the lamp

assembly.

4. Gently pull the lamp assembly away

from the vehicle in an outboard

direction.

5. To install, perform these steps in

reverse order.

Replacing Direction Indicator

Bulbs

5. Disconnect the electrical connector.

6. Remove the direction indicator bulb by

turning the lower bulb socket

counterclockwise. Gently pull the bulb

straight out of the socket.

7. To install, reverse the removal

procedure.

E307885

Direction Indicator

Side marker

383

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Maintenance

ReplacingReverseLampAssembly

Bulbs

E307887

1. Remove the screws with a flathead

screwdriver and pull the lamp

assembly away from the vehicle.

2. Remove the bulb by turning the lower

bulb socket counterclockwise. Gently

pull the bulb straight out of the socket.

3. To install, reverse the removal

procedure.

Replacing License Plate Lamp

Bulbs

License plate lamps are LED and are not

serviceable. See an authorized dealer if

they fail.

ReplacingHigh-MountBrakeLamp

Bulbs

High-mount stop lamps are LED and are

not serviceable. See an authorized dealer

if they fail.

384

Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing

Maintenance -> Changing a Bulb for Your Ford Kuga SUV 2020

Popular Manuals