Maintenance
OIL CHANGE INDICATOR
Message
Action and description
RESET - 1.5L ECOBOOST™,
FULL HYBRID ELECTRIC
VEHICLE (FHEV), PLUG-IN
HYBRID ELECTRIC VEHICLE
(PHEV)
If the instrument cluster
displays one of the following
messages, repeat the
process.
Not reset
Reset cancelled
Use the information display controls on
the steering wheel to reset the oil change
indicator.
ENGINE COOLANT CHECK
From the main menu scroll to:
Message
Action and description
WARNING: Do not remove the
coolant reservoir cap when the engine is
on or the cooling system is hot. Wait 10
minutes for the cooling system to cool
down. Cover the coolant reservoir cap
with a thick cloth to prevent the
Settings
Press the right arrow button,
then from this menu scroll
to the following message.
Vehicle
settings
Press the right arrow button,
then from this menu scroll
to the following message.
possibility of scalding and slowly remove
the cap. Failure to follow this instruction
could result in personal injury.
Oil life
Press the right arrow button,
then from this menu scroll
to the following message.
WARNING: Do not put coolant in
the windshield washer reservoir. If
sprayed on the windshield, coolant could
make it difficult to see through the
windshield.
Hold OK to Press and hold the OK
reset
button until the instrument
cluster displays the
following message.
WARNING: To reduce the risk of
personal injury, make sure the engine is
cool before unscrewing the coolant
pressure relief cap. The cooling system
is under pressure. Steam and hot liquid
can come out forcefully when you loosen
the cap slightly.
Reset successful
When the oil change indic-
ator resets the instrument
cluster displays 100%.
Remaining oil life
{##0}%
WARNING: Do not add coolant
further than the MAX mark.
When the engine is cold, check the
concentration and level of the coolant at
the intervals listed in the scheduled
maintenance information.
372
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
