Maintenance -> Opening and Closing the Hood for Your Ford Kuga SUV 2020

Maintenance  
Check Monthly  
GENERAL INFORMATION  
Engine oil level. See Engine Oil Check  
(page 371).  
Engine coolant level. See Engine  
WARNING: Do not work on a hot  
engine.  
Coolant Check (page 372).  
Brake fluid level. See Brake Fluid  
Check (page 377).  
WARNING: Switch the ignition off  
and apply the parking brake.  
Pipes, hoses and reservoirs for leaks.  
Air conditioning operation.  
Parking brake operation.  
Horn operation.  
WARNING: Do not touch the  
electronic ignition system parts after you  
have switched the ignition on or when  
the engine is running. The system  
operates at high voltage. Failure to  
adhere to this warning could result in  
serious personal injury or death.  
Tightness of lug nuts. See Lug Nuts  
(page 407).  
OPENING AND CLOSING THE  
HOOD  
WARNING: Keep your hands and  
clothing clear of the engine cooling fan.  
Opening the Hood  
Under certain conditions, the engine  
cooling fan may continue to run for several  
minutes after you switch your vehicle off.  
Make sure that you fit filler caps securely  
after carrying out maintenance checks.  
We recommend that you carry out the  
following checks.  
Check Daily  
Exterior lamps.  
Interior lamps.  
Warning lamps and indicators.  
Check When Refueling  
Washer fluid level. See Washer Fluid  
Check (page 380).  
E263274  
Tire pressures. See General  
Information (page 389).  
1. Open the left-hand front door.  
2. Fully pull the hood release lever and  
Tire condition. See Wheels and Tires  
let it completely retract.  
(page 389).  
Note: This action releases the hood latch.  
3. Fully pull the hood release lever for a  
second time.  
Note: This action fully releases the hood.  
362  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Maintenance  
4. Open the hood.  
2. Insert a suitable tool, for example a  
screwdriver, in the position shown.  
Note: There is no secondary latch under the  
hood.  
E263802  
E193263  
3. Gently pry the hood release lever  
securing clip upward.  
5. Support the hood with the strut.  
Note: Hold the yellow section of the hood  
strut.  
Opening the Hood if the Passenger  
Door cannot be Opened  
1. Unlock the right-hand front door using  
the key and access the left-hand front  
footwell. See LockingandUnlocking  
(page 56).  
E263803  
4. Use a suitable tool, for example a  
hexagonal socket, and turn the hood  
release mechanism clockwise until you  
feel a strong resistance.  
5. Let the hood release mechanism  
completely retract.  
Note: This action releases the hood latch.  
E263801  
363  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Maintenance  
6. Turn the hood release mechanism  
8. Support the hood with the strut.  
clockwise until you feel a strong  
resistance for a second time.  
Note: Hold the yellow section of the hood  
strut.  
Note: This action fully releases the hood.  
7. Open the hood.  
9. Reinstall the hood release lever. To  
install, reverse the removal procedure.  
Note: There is no secondary latch under the  
Note: Make sure the hood release lever  
hood.  
securing clip is fully engaged.  
Closing the Hood  
1. Remove the strut from the catch and  
secure it correctly in the clip.  
2. Lower the hood and allow it to drop  
under its own weight for the last  
2535 cm (1014 in).  
Note: Make sure that the hood is correctly  
closed.  
Warning Lamps and Indicators  
It illuminates when you switch  
the ignition on and remains on if  
any door or the hood is open.  
E193263  
Information Messages  
Message  
Action  
Bonnet open  
Stop your vehicle as soon as it is safe to do so and  
close the hood.  
364  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing