MyKey -> Creating a MyKey Vehicles With 4.2 Inch Instrument Cluster Display Screen for Your Ford Kuga SUV 2020

MyKey  
Pre-collision assist and lane keeping alert  
Audio System Volume Limit  
turn on when you start the engine, but can  
be switched off with a MyKey.  
The audio system maximum volume is  
reduced. A message appears in the  
information display if you attempt to  
exceed the volume limit. Automatic  
volume control turns off.  
A new destination in the navigation system  
can only be set using voice commands,  
when using a MyKey and your vehicle is  
moving.  
Emergency Assistance  
If you set emergency assistance to be  
always on, it cannot be switched off with  
a MyKey.  
Configurable Settings  
You can configure the following settings  
after creating a MyKey. See Creating a  
MyKey (page 49).  
Do Not Disturb  
If you set do not disturb to be always on,  
it cannot be switched off with a MyKey.  
WARNING: Do not set MyKey  
maximum speed limit to a limit that will  
prevent the driver from maintaining a  
safe speed considering posted speed  
limits and prevailing road conditions. The  
driver is always responsible to drive in  
accordance with local laws and  
Note: : If a phone is connected using Apple  
CarPlay or Android Auto while driving with  
a MyKey, the driver can receive phone calls  
and text messages even if the do not disturb  
restriction is on.  
Traction Control  
prevailing conditions. Failure to do so  
could result in accident or injury.  
If you set traction control to be always on,  
it cannot be switched off with a MyKey.  
You can set a speed limit for your vehicle.  
Warning messages appear in the  
information display and a tone sounds if  
your vehicle reaches the set speed. You  
cannot override the set speed when using  
a MyKey.  
CREATING A MYKEY -  
VEHICLES WITH: 4.2 INCH  
INSTRUMENT CLUSTER  
DISPLAY SCREEN  
Speed Reminder  
1. Place an admin key in the backup  
position.  
You can set a speed reminder for your  
vehicle. Warning messages appear in the  
information display and a tone sounds if  
your vehicle exceeds the set speed.  
2. Switch the ignition on.  
49  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
 
MyKey™  
To create a MyKey, use the information display controls on the steering wheel to  
select the following:  
Menu Item  
Action  
Settings  
Press the menu button.  
MyKey  
Press the OK button.  
Create MyKey  
Press and hold the OK button until a confirmation message  
appears in the information display.  
Switch the ignition off.  
Note: We recommend that you label this  
key.  
MyKey Information Messages  
Message  
Description  
Place key in backup loca- Displays when trying to create a MyKey and the key is not  
tion  
placed in the backup position.  
Key is already a MyKey  
Displays when trying to create a MyKey with a key already  
designated as a MyKey.  
Key restricted at next  
start. Label this key  
Displays to confirm that the key is restricted after you switch  
the ignition off.  
50  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
MyKey™  
1. Remove the rubber mat.  
CREATING A MYKEY -  
VEHICLES WITH: 6.5 INCH  
INSTRUMENT CLUSTER  
DISPLAY SCREEN/12.3 INCH  
INSTRUMENT CLUSTER  
DISPLAY SCREEN  
2. Place the admin key in the position  
shown, with the buttons facing upward.  
3. Switch the ignition on.  
4. Press the menu button on the steering  
wheel to enter the information display  
main menu.  
5. Select Settings.  
6. Select MyKey.  
7. Select Create MyKey.  
8. Press and hold the OK button until a  
confirmation message appears in the  
information display.  
1
9. Switch the ignition off.  
Note: We recommend that you label this  
key.  
2
E264544  
MyKey Information Messages  
Message  
Description  
Place key in backup loca- Displays when trying to create a MyKey and the key is not  
tion  
placed in the backup position.  
Key is already a MyKey  
Displays when trying to create a MyKey with a key already  
designated as a MyKey.  
Key restricted at next  
start. Label this key  
Displays to confirm that the key is restricted after you switch  
the ignition off.  
Switch the ignition on using an admin key.  
PROGRAMMING A MYKEY -  
VEHICLES WITH: 4.2 INCH  
INSTRUMENT CLUSTER  
DISPLAY SCREEN  
You can only program MyKeys to the same  
settings.  
51  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
MyKey™  
To program a MyKey, use the information display controls on the steering wheel  
to select the following:  
Menu Item  
Settings  
MyKey  
Action  
Press the menu button.  
Press the OK button.  
Select a setting and press the OK button.  
Configure the setting.  
Switch the ignition off.  
52  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing