Seats -> Memory Function for Your Ford Kuga SUV 2020

Seats  
Recalling a Pre-Set Position  
MEMORY FUNCTION  
Press and release the memory button  
associated with your desired driving  
position. The memory features move to  
the position stored for that preset.  
Note: You can only recall a preset memory  
position when you switch the ignition off, or  
when the transmission is in park (P) or  
neutral (N) (and your vehicle is not moving)  
if you switch the ignition on.  
WARNING: Before activating the  
memory seat, make sure that the area  
immediately surrounding the seat is clear  
of obstructions and that all occupants  
are clear of moving parts.  
WARNING:Do not use the memory  
function when your vehicle is moving.  
You can also recall a preset memory  
position by:  
This function recalls the position of the  
following:  
Pressing the unlock button on your  
intelligent access keyfob if it is linked  
to a preset position.  
Driver seat.  
Power mirrors.  
Unlocking the intelligent driver door  
The memory control is on the driver door.  
handle if a linked key fob is present.  
Note: Using a linked key fob to recall your  
memory position when the ignition is off  
moves the seat to the Easy Entry position.  
Note: Pressing any active memory feature  
adjustment control (or any memory button)  
during a memory recall cancels the  
operation.  
Linking a PreSet Position to your  
Remote Control or Intelligent Access  
Key Fob  
You can save preset memory positions for  
up to three remote controls or intelligent  
access (IA) keys.  
E142554  
Saving a PreSet Position  
1. Switch the ignition on.  
1. With the ignition on, move the memory  
positions to the desired positions.  
2. Adjust the memory features to your  
desired position.  
2. Press and hold the desired preset  
button for about five seconds. A tone  
sounds after about two seconds.  
Continue holding until you hear a  
second tone.  
3. Within three seconds, press the lock  
button on the remote control you are  
linking.  
3. Press and hold the desired memory  
button until you hear a single tone.  
You can save up to three memory position  
presets. You can save a memory preset at  
any time.  
160  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Seats  
To unlink a remote control, follow the  
same procedure except in step 3, press  
the unlock button on the remote control.  
Note: If more than one linked remote  
control or intelligent access key is in range,  
the memory function moves to the settings  
of the first key to initiate a memory recall.  
Easy Entry and Exit Feature  
If you enable the easy entry and exit  
feature, it moves the driver seat position  
rearward up to 5 cm (2 in) when you switch  
the ignition off.  
The driver seat returns to its previous  
position when you switch the ignition on.  
E159654  
You can enable or disable this feature  
With the seat empty, pull the lever up to  
fold the seatback forward.  
through the information display.  
See Information Displays (page 110).  
Note: Lower the head restraints. See Head  
Restraints (page 155).  
REAR SEATS  
Folding the Seatback  
Unfolding the Seatback  
WARNING: When folding the  
seatbacks up, make sure that the safety  
belts are visible to an occupant and not  
caught behind the seat.  
WARNING: When folding the  
seatbacks down, take care not to get  
your fingers caught between the  
seatback and seat frame.  
WARNING: Make sure that the  
seats and the seatbacks are secure and  
fully engaged in their catches.  
Recline Adjustment  
With the seat occupied, pull the lever up  
to recline the seat backward.  
161  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing