Security -> Anti-Theft Alarm Vehicles With: Integral Battery and Interior Sensor for Your Ford Kuga SUV 2020

Security  
Note: A valid passive key must be within  
If the interior sensors detect movement  
the detection range of that door.  
within your vehicle.  
If the inclination sensors detect an  
attempt to raise your vehicle.  
ANTI-THEFT ALARM -  
VEHICLES WITH: INTERIOR  
SENSOR(IF EQUIPPED)  
If the alarm is triggered, the alarm horn will  
sound for 30 seconds and the hazard  
warning flasher will flash for five minutes.  
Any further attempts to perform one of the  
Alarm System  
Note: Do not arm the alarm with full guard  
if passengers, animals or other moving  
objects are inside your vehicle.  
above will trigger the alarm again.  
Full and Reduced Guard  
Full Guard  
Perimeter Alarm  
Full guard is the standard setting.  
The perimeter alarm is a deterrent against  
unauthorized access to your vehicle  
through the doors and the hood. It also  
protects the audio unit.  
In full guard, the interior sensors are on  
when you arm the alarm.  
Reduced Guard  
In reduced guard, the interior sensors are  
Interior Sensors  
off when you arm the alarm.  
The interior lamp unit sensors are in the  
Note: The alarm security level will switch  
back to full guard when the power is turned  
on.  
overhead console.  
Note: Do not cover the interior lamp  
scanning sensors.  
Selecting Full or Reduced Guard  
You can select full or reduced guard using  
the information display. See General  
Information (page 110).  
The sensors act as a deterrent against  
unauthorized intrusion by sensing any  
movement inside your vehicle.  
Triggering the Alarm  
Ask on Exit (If Equipped)  
You can set the information display to ask  
you each time which level of guard you  
wish to set.  
Once armed, the alarm is triggered in any  
of the following ways:  
If someone opens a door, the liftgate  
or the hood without a valid key or  
remote control.  
If you switch your vehicle on without a  
correctly coded key.  
70  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Security  
Using the information display controls, scroll to:  
Message  
Action and Description  
Settings  
Press the OK button.  
Press the OK button.  
Press the OK button.  
Press the OK button.  
Vehicle settings  
Alarm  
Ask on exit  
Reduced guard  
Appears in the information display each time you switch your  
vehicle off.  
If you wish to arm the alarm with reduced guard, press the  
OK button when this message appears.  
If you wish to arm the alarm with full guard, leave your vehicle  
without pressing the OK button.  
Note: Selecting reduced guard does not set the alarm permanently to reduced guard. It  
sets it to reduced guard only for the current locking cycle.  
Arming the Alarm  
To arm the alarm, lock your vehicle. See  
Doors and Locks (page 56).  
Disarming the Alarm  
Disarm and silence the alarm by unlocking  
the doors and switching your vehicle on, or  
unlocking the doors with the remote  
control.  
Note: A valid remote control must be within  
the detection range of that door for keyless  
entry. See Locking and Unlocking (page  
56).  
71  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing