Transmission for Your Ford Kuga SUV 2020

Transmission  
MANUAL TRANSMISSION  
General Information  
Do not rest your hand on the gearshift lever  
or use the gearshift lever to hang and  
support objects. This could cause damage  
to the transmission not covered by the  
vehicle Warranty.  
Do not rest your foot on the clutch pedal  
or use the clutch pedal to keep your vehicle  
stationary when waiting on a hill. This  
could cause damage to the clutch not  
covered by the vehicle Warranty.  
E99067  
Failure to fully press the clutch pedal could  
cause increased shift efforts, prematurely  
wear transmission components or damage  
to the transmission.  
If any gear is not fully engaged, fully press  
the clutch pedal and shift into neutral.  
Release the clutch pedal for a moment,  
fully press the clutch pedal again and shift  
into gear.  
3. Raise the collar and shift into reverse  
gear.  
AUTOMATIC TRANSMISSION  
- EXCLUDING: HYBRID  
ELECTRIC VEHICLE (HEV)/  
PLUG-IN HYBRID ELECTRIC  
VEHICLE (PHEV)  
Shifting Into Reverse Gear  
Do not shift into reverse gear when your  
vehicle is moving. This could cause  
damage to the transmission not covered  
by the vehicle Warranty.  
WARNING: Do not apply the brake  
pedal and accelerator pedal  
simultaneously. Applying both pedals  
simultaneously for more than a few  
seconds will limit engine performance,  
which may result in difficulty maintaining  
speed in traffic and could lead to serious  
injury.  
1. Fully press the brake pedal.  
2. Fully press the clutch pedal and shift  
into neutral.  
WARNING: When your vehicle is  
stationary, keep the brake pedal fully  
pressed when shifting gears. Failure to  
follow this instruction could result in  
personal injury, death or property  
damage.  
231  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Automatic Transmission Position  
Indicators  
WARNING: Apply the parking  
brake, shift into park (P), switch the  
ignition off and remove the key before  
you leave your vehicle. Failure to follow  
this instruction could result in personal  
injury or death.  
The instrument cluster displays the current  
position.  
Note: You may not be able to shift out of  
park (P) unless the remote control is inside  
your vehicle.  
Understanding the Shift Positions  
of Your Automatic Transmission  
E341776  
Note: The position illuminates on the  
transmission selector.  
Automatic Transmission Shift  
Indicators  
Shift indicators illuminate when  
shifting gear is recommended.  
E303655  
Park (P)  
Putting your vehicle in or out of gear:  
With the transmission selector in park (P),  
the vehicle locks the transmission and  
prevents the wheels from turning. Always  
come to a complete stop before putting  
the vehicle into and out of park (P).  
Your vehicle has an electronic transmission  
selector. The transmission selector is on  
the center console, below the climate  
control system.  
To place the vehicle in gear from park (P):  
The electric parking brake could apply  
when you shift to park (P) without the  
brake pedal fully depressed. The electric  
parking brake applies when you shift to  
park (P) on large slopes, and releases with  
the drive away release function.  
1. Fully press and hold the brake pedal  
when shifting out of park (P).  
2. Rotate the outer ring of the  
transmission selector clockwise from  
park (P), until the desired gear  
illuminates on the transmission  
selector.  
3. Release the brake pedal and the  
transmission remains in the selected  
gear.  
232  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Reverse (R)  
Manually Shifting Gears  
Shifting Using Paddle Shifters  
WARNING: Move the transmission  
The instrument cluster displays the current  
selector lever to reverse (R) only when  
your vehicle is stationary and the engine  
is at idle speed.  
gear.  
The current gear flashes when your vehicle  
cannot shift into the requested gear.  
With the transmission selector in reverse  
(R), your vehicle moves backward. Always  
come to a complete stop before shifting  
into and out of reverse (R).  
Your vehicle will not shift if the requested  
gear raises or lowers the engine speed  
beyond the limit.  
Your vehicle could shift when you fully  
press the accelerator or brake pedal.  
Neutral (N)  
Note: Prolonged driving with high engine  
speed could cause vehicle damage not  
covered by vehicle warranty.  
WARNING: In neutral (N) your  
vehicle is free to roll.  
Note: Drive modes could affect when the  
vehicle shifts into the requested gear.  
With the transmission selector in neutral  
(N), you can start your vehicle and it is free  
to roll. Hold the brake pedal down when in  
this position.  
Manually Shifting Gears in Drive (D)  
Use this feature when overtaking another  
vehicle, or to temporarily change gear.  
Drive (D)  
Drive (D) is the normal driving position for  
the best fuel economy.  
Low (L)(If Equipped)  
Provides maximum engine braking.  
Shift the transmission into low (L) at  
E144821  
any vehicle speed.  
The intent is not for use under  
Pull any paddle to switch the feature on.  
extended or normal driving conditions  
and results in lower fuel economy.  
Pull the right paddle (+) to upshift.  
Pull the left paddle (-) to downshift.  
Manual (M)(If Equipped)  
Hold the right paddle (+) for a few seconds  
to switch the feature off.  
In manual (M), you can upshift or  
downshift using the paddle shifters.  
Note: The feature switches off after a short  
period of time if neither paddle is pulled.  
With your vehicle in drive (D), press the  
manual (M) button to activate manual  
mode.  
233  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Manually Shifting Gears in Manual (M)  
Use this feature for engine braking on hilly  
or mountainous roads, or to select a  
specific gear.  
Automatic Return to Park (P)  
Limitations  
Automatic return to park (P) may not work  
if the door ajar switch is malfunctioning.  
See an authorized dealer if any of the  
following occur:  
Door ajar indicator does not illuminate  
with the driver door open.  
Door ajar indicator illuminates with the  
driver door closed.  
Transmission not in park message  
appears with the driver door closed,  
after you shift out of park (P).  
E144821  
Shift to manual (M) to switch the feature  
on.  
Stay in Neutral Mode  
Pull the right paddle (+) to upshift.  
Pull the left paddle (-) to downshift.  
This mode keeps your vehicle in neutral  
(N) when you switch your vehicle off. Use  
this mode at an automatic car wash if you  
exit your vehicle, or switch your vehicle off.  
Shift to drive (D) to switch the feature off.  
Automatic Return to park  
Your vehicle shifts into park (P) if you  
attempt to exit your vehicle without the  
transmission in park (P).  
Your vehicle shifts into park (P) when your  
vehicle is stationary and any of the  
following occur:  
Note: Do not tow your vehicle in this mode.  
Note: Automatic return to park (P) is  
delayed when your vehicle is in this mode.  
Stay in Neutral Mode Limitations  
Your vehicle could shift to park (P) after  
30 minutes, or when the vehicle battery  
charge level is low. Prolonged use of this  
mode can cause the vehicle battery to run  
out of charge.  
Do not tow your vehicle in this mode.  
Failure to follow these instructions could  
result in vehicle damage not covered by  
the vehicle warranty.  
You switch the vehicle off.  
You open the driver door with your  
seatbelt unlatched.  
You unlatch the driver seatbelt when  
the driver door is open.  
Note: This feature does not operate when  
your vehicle is in stay in neutral mode.  
Entering Stay in Neutral Mode  
Note: Do not use automatic return to park  
(P) when your vehicle is moving, except in  
an emergency. See Stopping the Engine  
When Your Vehicle is Moving (page 173).  
1. Power your vehicle on. See Push  
Button Ignition Switch (page 169).  
2. Bring your vehicle to a complete stop.  
3. Press and hold the brake pedal.  
4. Shift into neutral (N).  
Note: An instructional message appears.  
234  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
5. Press the low (L) button in the middle  
4. Shift from park (P) to neutral (N).  
of the transmission selector.  
5. Press the manual (M) or low (L)  
Note: A confirmation message appears  
when your vehicle enters the mode and the  
neutral (N) button on the transmission  
selector flashes.  
6. Release the brake pedal.  
Note: Your vehicle is free to roll.  
7. Switch your vehicle off.  
button.  
6. Attempt to start the engine.  
Note: A confirmation message appears in  
the information display when your vehicle  
has entered stay in neutral mode.  
Note: You must complete this procedure  
within 20 seconds.  
Note: Do not tow your vehicle in this mode.  
7. Release the accelerator and brake  
pedals.  
Exiting Stay in Neutral Mode  
1. Press the brake pedal.  
2. Shift into park (P), or power your  
vehicle on and shift into drive (D) or  
reverse (R).  
8. Switch the ignition off.  
The transmission returns to park (P) if the  
vehicle battery charge is low.  
Note: Prolonged use of stay in neutral mode  
could cause the vehicle battery to run out  
of charge.  
Stay in Neutral Mode - Failure to  
Start  
To exit stay in neutral mode, press the  
brake pedal and shift into park (P).  
If Your Vehicle Gets Stuck in Mud  
or Snow  
If your vehicle gets stuck in mud or snow,  
rock it out by shifting between forward and  
reverse gears, stopping between shifts in  
a steady pattern. Press lightly on the  
accelerator in each gear.  
Note: Do not rock the vehicle if the engine  
is not at normal operating temperature or  
damage to the transmission could occur.  
Note: Do not rock the vehicle for more than  
a minute or damage to the transmission and  
tires could occur, or the engine may  
overheat.  
WARNING: When doing this  
procedure, you need to take the  
transmission out of park (P) which  
means your vehicle can roll freely. To  
avoid unwanted vehicle movement,  
always fully apply the parking brake prior  
to doing this procedure. Use wheel  
chocks if appropriate.  
Use this feature to move the transmission  
selector out of park (P) if you cannot start  
the engine.  
Note: This feature does not function if the  
vehicle battery charge is low.  
Do not tow your vehicle in stay in neutral  
mode.  
Automatic Transmission Audible  
Warnings  
1. Switch the ignition on without your foot  
on the brake pedal.  
Transmission Not In Park (P) Audible  
Warning  
2. Fully press the brake pedal. Keep the  
brake pedal fully pressed.  
Sounds if you open the driver door before  
3. Fully press the accelerator pedal. Keep  
the accelerator pedal fully pressed.  
shifting into park (P).  
235  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Automatic Transmission  
Information Messages  
AUTOMATIC TRANSMISSION  
- HYBRID ELECTRIC VEHICLE  
(HEV)/PLUG-IN HYBRID  
Message  
Description  
ELECTRIC VEHICLE (PHEV)  
Park brake not  
applied  
The electric parking  
brake is not fully  
applied.  
WARNING: Do not apply the brake  
pedal and accelerator pedal  
Transmission not in A reminder to shift  
Park  
into park. In addi-  
tion, this message  
typically appears  
after reconnecting  
or recharging the  
battery until you  
cycle the ignition to  
the on mode.  
simultaneously. Applying both pedals  
simultaneously for more than a few  
seconds will limit engine performance,  
which may result in difficulty maintaining  
speed in traffic and could lead to serious  
injury.  
WARNING: When your vehicle is  
stationary, keep the brake pedal fully  
pressed when shifting gears. Failure to  
follow this instruction could result in  
personal injury, death or property  
damage.  
Shift malfunction  
Displays when  
Confirm park brake there is a system  
Apply before exiting fault and the park  
the vehicle  
brake needs to be  
depressed before  
exiting the vehicle.  
See your authorized  
dealer.  
WARNING: Apply the parking  
brake, shift into park (P), switch the  
vehicle off and remove the key or remote  
control before you leave your vehicle.  
Failure to follow this instruction could  
result in personal injury or death.  
Transmission  
malfunction  
Service now  
The system has  
detected a fault  
that requires  
service. Have your  
vehicle checked as  
soon as possible.  
Note: The ready to drive indicator may be  
off and you may not be able to shift out of  
park (P) unless the remote control is inside  
your vehicle.  
Select M to confirm Displays when you  
Stay in neutral  
mode  
shift into neutral  
(N).  
Stay in neutral  
mode engaged  
Displays to confirm  
that your vehicle  
has entered Stay in  
Neutral Mode.  
236  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Understanding the Shift Positions  
of Your Automatic Transmission  
E341619  
Note: The position illuminates on the  
transmission selector.  
Park (P)  
With the transmission selector in park (P),  
your vehicle locks the transmission and  
prevents the wheels from turning. Always  
come to a complete stop before putting  
your vehicle into and out of park (P).  
E224178  
Putting your vehicle in or out of gear:  
Your vehicle has an electronic transmission  
shifter. The transmission selector is on the  
center console, below the climate control  
system.  
Reverse (R)  
To place your vehicle in gear from park (P):  
WARNING: Move the transmission  
selector lever to reverse (R) only when  
your vehicle is stationary and the engine  
is at idle speed.  
1. Fully press and hold the brake pedal  
when shifting out of park (P).  
2. Rotate the outer ring of the  
transmission selector clockwise from  
park (P), until the desired gear  
illuminates on the transmission  
selector.  
3. Release the brake pedal and the  
transmission remains in the selected  
gear.  
With the transmission selector in reverse  
(R), your vehicle moves backward. Always  
come to a complete stop before shifting  
into and out of reverse (R).  
Neutral (N)  
Automatic Transmission Position  
WARNING: In neutral (N) your  
Indicators  
vehicle is free to roll.  
The instrument cluster displays the current  
position.  
With the transmission selector in neutral  
(N), your vehicle can be started and is free  
to roll. Hold the brake pedal down when in  
this position.  
Drive (D)  
Drive (D) is the normal driving position for  
the best fuel economy.  
237  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Low (L)  
Stay in Neutral Mode  
Provides maximum engine braking.  
This mode keeps your vehicle in neutral  
(N) when you switch your vehicle off. Use  
this mode at an automatic car wash if you  
exit your vehicle, or switch your vehicle off.  
The transmission may be shifted into  
low (L) at any vehicle speed.  
Is not intended for use under extended  
or normal driving conditions and results  
in lower fuel economy.  
Note: Do not tow your vehicle in this mode.  
Note: Automatic return to park (P) is  
delayed when your vehicle is in this mode.  
Automatic Return to park  
Your vehicle shifts into park (P) if you  
attempt to exit your vehicle without the  
transmission in park (P).  
Your vehicle shifts into park (P) when your  
vehicle is stationary and any of the  
following occur:  
Stay in Neutral Mode Limitations  
Your vehicle could shift to park (P) after  
30 minutes, or when the vehicle battery  
charge level is low. Prolonged use of this  
mode can cause the vehicle battery to run  
out of charge.  
Do not tow your vehicle in this mode.  
Failure to follow these instructions could  
result in vehicle damage not covered by  
the vehicle warranty.  
You switch the vehicle off.  
You open the driver door with your  
seatbelt unlatched.  
You unlatch the driver seatbelt when  
the driver door is open.  
Entering Stay in Neutral Mode  
Note: This feature does not operate when  
1. Power your vehicle on. See Push  
your vehicle is in stay in neutral mode.  
Button Ignition Switch (page 169).  
Note: Do not use automatic return to park  
(P) when your vehicle is moving, except in  
an emergency. See Stopping the Engine  
When Your Vehicle is Moving (page 173).  
2. Bring your vehicle to a complete stop.  
3. Press and hold the brake pedal.  
4. Shift into neutral (N).  
Note: An instructional message appears.  
Automatic Return to Park (P)  
5. Press the low (L) button in the middle  
Limitations  
of the transmission selector.  
Automatic return to park (P) may not work  
if the door ajar switch is malfunctioning.  
Note: A confirmation message appears  
when your vehicle enters the mode and the  
neutral (N) button on the transmission  
selector flashes.  
See an authorized dealer if any of the  
following occur:  
Door ajar indicator does not illuminate  
with the driver door open.  
6. Release the brake pedal.  
Note: Your vehicle is free to roll.  
7. Switch your vehicle off.  
Door ajar indicator illuminates with the  
driver door closed.  
Note: Do not tow your vehicle in this mode.  
Transmission not in park message  
appears with the driver door closed,  
after you shift out of park (P).  
Exiting Stay in Neutral Mode  
1. Press the brake pedal.  
238  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
2. Shift into park (P), or power your  
Automatic Transmission Audible  
Warnings  
vehicle on and shift into drive (D) or  
reverse (R).  
Transmission Not In Park (P) Audible  
Grade Assist  
Warning  
Sounds if you open the driver door before  
shifting into park (P).  
Press the grade assist button to  
activate grade assist. The grade  
E345788  
assist lamp appears in the  
Automatic Transmission  
Information Messages  
instrument cluster. Press the button again  
to switch it off.  
Provides additional grade braking with  
a combination of engine motoring and  
high-voltage battery charging to help  
maintain vehicle speed when  
Message  
Description  
Park brake not  
applied  
The electric parking  
brake is not fully  
applied.  
descending a slope.  
As your vehicle determines the amount  
of engine motoring and high-voltage  
battery charging, you may notice the  
engine speed increasing and  
decreasing to help maintain your  
vehicle speed when descending a  
slope.  
Transmission not in A reminder to shift  
Park  
into park. In addi-  
tion, this message  
typically appears  
after reconnecting  
or recharging the  
battery until you  
cycle the ignition to  
the on mode.  
If Your Vehicle Gets Stuck in Mud  
or Snow  
Shift malfunction  
Displays when  
If your vehicle gets stuck in mud or snow,  
rock it out by shifting between forward and  
reverse gears, stopping between shifts in  
a steady pattern. Press lightly on the  
accelerator in each gear.  
Note: Do not rock the vehicle if the engine  
is not at normal operating temperature or  
damage to the transmission could occur.  
Confirm park brake there is a system  
Apply before exiting fault and the park  
the vehicle  
brake needs to be  
depressed before  
exiting the vehicle.  
See your authorized  
dealer.  
Note: Do not rock the vehicle for more than  
a minute or damage to the transmission and  
tires could occur, or the engine could  
overheat.  
239  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing  
Transmission  
Message  
Description  
Transmission  
malfunction  
Service now  
The system has  
detected a fault  
that requires  
service. Have your  
vehicle checked as  
soon as possible.  
Select L to confirm Displays when you  
Stay in neutral  
mode  
shift into neutral  
(N).  
Stay in neutral  
mode engaged  
Displays to confirm  
that your vehicle  
has entered stay in  
neutral mode.  
240  
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing