uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
■ Locking the doors (Walk away auto
lock®)
The auto lock function is set to OFF as the factory
default setting. The auto lock function can be set to
ON using the audio/information screen.
If you set the auto lock function to ON using the
audio/information screen, only the keyless remote
that was used to unlock the driver’s door prior to the
setting change can activate auto lock.
When you walk away from the vehicle with all
doors closed while carrying the keyless
remote, the doors will automatically lock.
The auto lock function activates when all
doors are closed, and the keyless remote is
within about 5 feet (1.5 m) radius of the
2 Customized Features P. 351
The activation range of
outside door handle.
the auto lock function is
about 5 feet (1.5 m)
Exit vehicle while carrying keyless remote and
close door(s).
1. While within about 5 feet (1.5 m) radius of
the vehicle.
After the auto lock function has been activated,
when you stay within the locking/unlocking
operation range, the indicator on the keyless remote
will continue to flash until the doors are locked.
u The beeper sounds; the auto lock
function will be activated.
When you stay beside the vehicle within the
operation range, the doors will automatically lock
approximately 30 seconds after the auto lock
function activating beeper sounds.
2. Carry the keyless remote beyond about 5
feet (1.5 m) from the vehicle and remain
outside this range for 2 or more seconds.
u Some exterior lights flash; the beeper
sounds; all doors will then lock.
When you open a door after the auto lock function
activating beeper sounds, the auto lock function will
be canceled.
Under the following circumstances, the auto lock
function will not activate:
• The keyless remote is inside the vehicle.
uThe beeper will not sound.
• The keyless remote is taken out of its operational
range before all the doors are closed.
uThe beeper will sound.
172
