Features for Your Honda Accord 4 Door 2023

Features  
This chapter describes how to operate technology features.  
HondaLink® Service*........................ 305  
AT&T Hotspot* ................................ 311  
Siri Eyes Free* .................................. 312  
System Updates* .............................266  
* Not available on all models  
245  
Audio System  
About Your Audio System  
The audio system features AM/FM radio and SiriusXM® Radio* service. It can also  
play USB flash drives, iPod, iPhone, and Bluetooth® devices.  
iPod®, iPhone® and iTunes® are trademarks of Apple  
Inc.  
You can operate the audio system from the buttons and knobs on the panel, the  
remote controls on the steering wheel, or the icons on the touchscreen interface.  
State or local laws may prohibit the operation of  
handheld electronic devices while operating a  
vehicle.  
Remote Controls  
SiriusXM® Radio* is available on a subscription basis  
only. For more information on SiriusXM® Radio*,  
contact a dealer.  
USB Flash Drive  
iPod  
SiriusXM® Radio* is available in the United States and  
Canada, except Hawaii, Alaska, and Puerto Rico.  
SiriusXM®* is a registered trademark of SiriusXM  
Radio, Inc.  
* Not available on all models  
246  
   
uuAudio SystemuUSB Ports  
USB Ports  
In the Center Pocket (  
)
In the Center Pocket  
The USB port(s) (2.5A) is/are for charging  
devices, playing audio files and connecting  
compatible phones with Apple CarPlay or  
Android Auto.  
u To prevent any potential issues, be sure  
to use an Apple MFi Certified Lightning  
Connector for Apple CarPlay, and for  
Android Auto, the USB cables should be  
certified by USB-IF to be compliant with  
USB 2.0 Standard.  
Do not leave the iPod or USB flash drive in the  
vehicle. Direct sunlight and high temperatures may  
damage it.  
We recommend that you use a USB cable if you are  
attaching a USB flash drive to the USB port.  
Do not connect the iPod or USB flash drive using a  
hub.  
Do not use a device such as a card reader or hard  
disk drive, as the device or your files may be  
damaged.  
We recommend backing up your data before using  
the device in your vehicle.  
*1  
Displayed messages may vary depending on the  
device model and software version.  
*
In the Center Pocket (  
)
*2  
The USB port (2.5A) is only for charging  
devices.  
USB charge  
u You cannot play music even if you have  
connected music players to it.  
The USB port can supply up to 2.5A of power. It does  
not output 2.5A unless the device requests.  
For amperage details, read the operating manual of  
the device that needs to be charged.  
Under certain conditions, a device connected to the  
port may generate noise to the radio station you are  
listening to.  
*1: Models without wireless Apple CarPlay and wireless Android Auto  
*2: Models with wireless Apple CarPlay and wireless Android Auto  
* Not available on all models  
Continued  
247  
 
uuAudio SystemuUSB Ports  
Rear of the center console*  
The USB ports (2.5A) are only for charging  
devices.  
Rear of the center console*  
u You cannot play music even if you have  
connected music players to them.  
* Not available on all models  
248  
uuAudio SystemuAudio System Theft Protection  
Audio System Theft Protection  
The audio system is disabled when it is disconnected from the power source, such as  
when the battery is disconnected or goes dead. In certain conditions, the system  
may display a code entry screen. If this occurs, reactivate the audio system.  
Reactivating the audio system  
1. Set the power mode to ON.  
2. Turn on the audio system.  
3. Press and hold the audio system power knob for more than two seconds.  
u The audio system is reactivated when the audio control unit establishes a  
connection with the vehicle control unit. If the control unit fails to recognize  
the audio unit, you must go to a dealer and have the audio unit checked.  
249  
 
uuAudio SystemuAudio Remote Controls  
Audio Remote Controls  
Allow you to operate the audio system while driving. The information is shown on  
the driver information interface or head-up display*.  
Some modes appear only when an appropriate  
device or medium is used.  
VOL(+/VOL(- (Volume) Buttons  
Press VOL(+: To increase the volume.  
(home) Button  
Left Selector Wheel  
Depending on the Bluetooth® device you connect,  
some functions may not be available.  
Press VOL(-: To decrease the volume.  
Press the  
(back) button for the driver  
information interface to go back to the previous  
screen or cancel a command.  
/
(Seek/Skip)  
Buttons  
(back)  
Button  
Press the  
(home) button to go back to the home  
screen of the driver information interface.  
VOL(+/VOL(- (Volume) Buttons  
Left Selector Wheel  
When selecting the audio mode  
Press the  
(home) button, then roll up or down to select Audio on the driver  
information interface, and then press the left selector wheel.  
* Not available on all models  
250  
 
uuAudio SystemuAudio Remote Controls  
Roll up or down:  
To cycle through the audio modes, roll up or down  
and then press the left selector wheel:  
FM  
AM  
SiriusXM®*  
USB1 (USB)  
USB2*  
Bluetooth® Audio  
Smartphone Connection  
(Apple CarPlay/Android Auto)  
* Not available on all models  
Continued  
251  
uuAudio SystemuAudio Remote Controls  
/
(Seek/Skip) Buttons  
When listening to the radio  
Press  
Press  
: To select the next preset radio station.  
: To select the previous preset radio station.  
Press and hold  
Press and hold  
: To select the next strong station.  
: To select the previous strong station.  
When listening to an iPod, USB flash drive, or Bluetooth® Audio, or Smartphone  
Connection  
Press  
Press  
: To skip to the next song.  
: To go back to the beginning of the current or previous song.  
When listening to a USB flash drive  
Press and hold  
Press and hold  
: To skip to the next folder.  
: To go back to the previous folder.  
252  
Audio System Basic Operation  
To use the audio system function, the power mode must be in ACCESSORY or ON.  
(Home) Button: Press to go to the home  
screen.  
These indications are used to show how to operate  
the Selector Knob.  
(Home) Button  
(Day/Night) Button  
(Audio) Button  
Rotate  
to select.  
(Back) Button: Press to go back to the  
previous display when it is displayed.  
Press  
to enter.  
(Phone) Button  
(Clock) Button*/  
Selector Knob  
When the list is not displayed, songs, frequency, etc.  
can be changed.  
/
(Seek/Skip) Buttons: Press to  
change songs.  
(Clock) Button*: Press to display the clock  
screen.  
(Map) Button*: Press to display the map  
screen.  
(Phone) Button: Press to display the  
phone screen.  
(Audio) Button: Press to display the  
(Map) Button*  
While connected to Apple CarPlay, it changes as  
follows:  
Pressing the Phone Button, display the Apple  
CarPlay phone screen.  
Pressing the Audio Button, display the Apple  
CarPlay audio screen.  
SOURCE Button  
(Back)  
Button  
Selector  
Knob  
current audio information.  
SOURCE Button: Press to display the source  
select screen.  
/
(Seek/Skip)  
Buttons  
Selector Knob: Rotate left or right to scroll  
through the available choices.  
Press  
to set your selection.  
(Day/Night) Button: Press to change  
the audio/information screen brightness.  
Press once and select or to make  
an adjustment.  
u Each time you press  
, the mode  
switches among the daytime mode,  
nighttime mode, and off mode.  
* Not available on all models  
253  
 
uuAudio System Basic OperationuAudio/Information Screen  
Audio/Information Screen  
Displays the audio status and wallpaper. From this display, you can go to various  
setup options.  
Touchscreen Operation  
Use simple gestures - including touching, swiping,  
and scrolling - to operate certain audio functions.  
Some items may be grayed out during driving to  
reduce the potential for distraction.  
You can select them when the vehicle is stopped or  
use voice commands.  
Switching the Display  
Using the audio/information screen  
Home Screen  
Wearing gloves may limit or prevent touchscreen  
response.  
(Home) Button  
You can change the touchscreen sensitivity setting.  
All Apps  
Press the  
button to go to the home screen.  
Select the following icons on the home screen or after selecting  
All Apps.  
Phone  
Displays the HFL information.  
254  
   
uuAudio System Basic OperationuAudio/Information Screen  
Trip Computer  
Displays the trip computer information.  
Current Drive tab: Displays the current trip information.  
Trip A/Trip B tab: Displays information for the current and three previous drives.  
The information is stored every time you reset Trip A/B.  
To reset the Trip A/B, select Settings, then select Delete Trip History.  
To change the setting of how to reset Trip A/B, select Settings, then select “Trip  
A” Reset Timing or “Trip B” Reset Timing.  
Clock  
Displays the clock.  
System Updates*  
Updates the software version of the audio system.  
FM/AM/SiriusXM*/USB1 (USB)/USB2*/Bluetooth Audio/Smartphone  
Connection  
Displays information for each audio format.  
Settings  
Enters the customizing menu screen.  
Navigation*  
Displays the navigation screen.  
2 Refer to the Navigation System Manual  
* Not available on all models  
Continued  
255  
uuAudio System Basic OperationuAudio/Information Screen  
HondaLink  
Displays the HondaLink screen.  
Apple CarPlay/Android Auto  
Displays the Apple CarPlay or Android Auto screen.  
Messages  
Displays the text message screen.  
AT&T Hotspot*  
Displays the AT&T Hotspot screen.  
Compass*  
Displays the compass screen.  
* Not available on all models  
256  
uuAudio System Basic OperationuAudio/Information Screen  
Wallpaper Setup  
The wallpaper you set up on Clock Faces cannot be  
displayed on the driver information interface.  
You can change, store, and delete the wallpaper on the audio/information screen.  
When importing wallpaper files, the image must be  
in the USB flash drive’s root directory. Images in a  
folder cannot be imported.  
The file name must be fewer than 64 characters (64  
bytes).  
The file format of the image that can be imported  
is BMP (bmp) or JPEG (jpg).  
If the USB flash drive does not have any pictures,  
the No files detected message appears.  
Up to five pictures can be imported.  
The individual file size limit is 2 MB.  
The maximum image size is 1,920 × 936 pixels. If  
the image size is less the image is displayed in the  
middle of the screen with the extra area appearing  
in black.  
Import wallpaper  
1. Connect the USB flash drive to the USB port  
in the center pocket.  
2. Select Clock.  
3. Select Settings.  
4. Select Clock Faces.  
5. Select Add New Wallpaper.  
u The Searching... screen is displayed.  
6. Import a desired picture.  
u Multiple pictures can be imported at the  
same time.  
7. Select Start Import.  
u The display will return to the Clock Faces  
screen.  
Continued  
257  
 
uuAudio System Basic OperationuAudio/Information Screen  
Select wallpaper  
1. Select Clock.  
You cannot delete the initial imported wallpapers.  
2. Select Settings.  
3. Select Clock Faces.  
4. Select a desired wallpaper.  
5. Select Set.  
When the file size is large, it takes a while to be  
previewed.  
u The display will return to the Clock Faces screen.  
To view wallpaper once it is set  
1. Press the  
button.  
2. Select Clock.  
Delete wallpaper  
1. Select Clock.  
2. Select Settings.  
3. Select Clock Faces.  
4. Select a desired wallpaper.  
5. Select Delete.  
6. Select Yes.  
u The display will return to the Clock Faces screen.  
258  
uuAudio System Basic OperationuAudio/Information Screen  
Home Screen  
The home screen has 2 pages. You can add up to 7  
pages.  
To move to the next screen  
Press the  
button to go directly back to the first  
page of the home screen from any page.  
Swipe  
> Icon  
< Icon  
Current page position  
<
>
, or swiping the screen left or right changes to the next screen.  
Selecting  
or  
Continued  
259  
 
uuAudio System Basic OperationuAudio/Information Screen  
To add app icons on the home screen  
App icons can be added on the home screen.  
You can add app icons by the following procedure.  
1. Press the  
2. Select and hold the home screen.  
3. Select Add.  
4. Drag and drop the icon to where you want  
it to be.  
5. Select Done.  
button.  
1. Press the  
2. Select All Apps.  
3. Select Customize.  
4. Select Add.  
5. Drag and drop the icon to where you want it to  
be.  
6. Select Done.  
button.  
u The screen will return to the home  
screen.  
uThe screen will return to the home screen.  
Pre-installed apps may not start up normally. If this  
occurs, you need to reset the system.  
If you perform Factory Data Reset, it may reset all  
the settings to their factory default.  
In case those apps still do not startup normally even  
after Factory Data Reset, contact your dealer.  
If a browser shuts down mid-use, the screen will  
return to the screen viewed prior to the browser  
startup.  
260  
 
uuAudio System Basic OperationuAudio/Information Screen  
To move icons on the home screen  
You can change location on the home screen.  
Select Tips to show tips. To hide them, select it again.  
1. Select and hold an icon.  
u The screen switches to the customization  
screen.  
2. Drag and drop the icon to where you want  
it to be.  
3. Select Done.  
Select and hold.  
u The screen will return to the home  
screen.  
Drag and drop.  
Continued  
261  
 
uuAudio System Basic OperationuAudio/Information Screen  
To remove icons on the home screen  
You can delete the icons on the home screen.  
Apps will not be deleted by deleting the icon on the  
home screen.  
1. Select and hold an icon.  
u The screen switches to the customization  
screen.  
Select Tips to show tips. To hide them, select it again.  
2. Drag and drop the icon you want to remove  
to the Hide icon.  
u The icon is removed from the home  
screen.  
Select and hold.  
3. Select Done.  
u The screen will return to the home  
screen.  
Drag and drop to  
Hide icon.  
262  
 
uuAudio System Basic OperationuAudio/Information Screen  
To shortcut icons on the home screen  
You can store up to three icons on the upper left of the home screen.  
1. Select and hold an icon.  
Select Tips to show tips. To hide them, select it again.  
u The screen switches to the customization  
screen.  
2. Drag and drop the icon you want to store to  
the upper left of the home screen.  
u The icon is a shortcut.  
Select and hold.  
Shortcut  
3. Select Done.  
Icons  
u The screen will return to the home  
screen.  
Drag and  
drop to preset  
icon.  
Continued  
263  
 
uuAudio System Basic OperationuAudio/Information Screen  
Status Area  
1. Select the system status icon.  
u The status area appears.  
2. Select an item to see the details.  
3. Press the  
button or select the system  
status icon to close the area.  
System  
Status Icon  
Status Area  
264  
 
uuAudio System Basic OperationuAudio/Information Screen  
Customizing the Meter  
You can store up to three customized configurations.  
To select or customize a configuration, select Select  
configuration.  
You can edit, show, or hide the meter contents on the driver information interface.  
1. Press the button.  
2. Select Settings.  
3. Select System.  
4. Select Config. of Instrument Panel.  
5. Select the content you wish to show or  
hide.  
u The checked items are displayed on the  
driver information interface.  
6. Select Done.  
Editing order  
You can change the order of the contents on the driver information interface.  
1. Press the button.  
2. Select Settings.  
3. Select System.  
4. Select Config. of Instrument Panel.  
5. Select Reorder.  
6. Select and hold the contents you want to  
move.  
7. Drag and drop the contents to where you  
want them to be.  
8. Select Done.  
265  
 
uuAudio System Basic OperationuSystem Updates*  
System Updates*  
The audio system’s firmware can be updated with a Wi-Fi connection or with a USB  
device.  
How to Update Wirelessly  
Wireless connection mode setup  
1. Press the  
button.  
If your vehicle has a telematics control unit (TCU), you  
do not need the wireless connection mode setup.  
2. Select System Updates.  
3. Select Settings.  
4. Select Connection Setup.  
5. Select Wi-Fi.  
6. Select Change Mode.  
7. Select Network, then Confirm.  
u The display returns to the network list.  
8. Select an access point from the network list,  
then Save.  
u If the audio system requires a password,  
enter a password.  
* Not available on all models  
266  
   
uuAudio System Basic OperationuSystem Updates*  
How to update  
When the audio system update is available, the notification is shown on the audio/  
information screen. Use the following procedure to update the system.  
You can update the system via Wi-Fi, but cannot use  
the captive portal that require login or agreement the  
terms of use on the browser.  
1. Press the  
button.  
Notification  
2. Select System Updates.  
Your download will be canceled if:  
Your Wi-Fi connection is severed.  
You turn off the ignition when the battery is low on  
power.  
Your download will recommence the next time a Wi-  
Fi connection is established.  
3. Select via Wireless.  
u If a notification is displayed on the  
screen, the screen of step 5 will be  
displayed.  
4. Select Download Now.  
u A notification appears on the screen.  
Continued  
267  
 
uuAudio System Basic OperationuSystem Updates*  
5. Select Install Now or Install while  
Vehicle OFF.  
u A notification appears on the screen if  
the update is successful.  
For battery protection, Install while Vehicle OFF  
cannot be selected when the battery is low on power.  
If you want to install the updated data, recharge the  
battery or select Install Now.  
268  
uuAudio System Basic OperationuSystem Updates*  
Automatic download settings  
Use the following procedure to change to the automatic download setting.  
1. Press the  
button.  
2. Select System Updates.  
3. Select Settings.  
4. Select Auto Download.  
5. Select the access point, then Yes.  
View a version and update status  
Use the following procedure to confirm the version and update status.  
1. Press the button.  
2. Select System Updates.  
3. Select Settings.  
4. Select Version Status.  
Continued  
269  
uuAudio System Basic OperationuSystem Updates*  
How to Update with a USB Device  
A USB device with a minimum of 8 GB of free space  
or more is recommended.  
Download the update files from the server  
1. Press the  
button.  
2. Select System Updates.  
3. Select via USB.  
u A notification appears on the screen.  
4. Connect a USB device into the USB port in  
the center pocket.  
Be sure to delete any previous inventory or update  
files from the USB before starting the USB update  
process.  
u The inventory data is copied into the USB  
device.  
5. Remove the USB device from the USB port.  
6. Connect the USB device into your  
computer, and then download the update  
files.  
u Follow the link to download the required  
software update files. Refer to  
https://usb.honda.com for instructions.  
270  
 
uuAudio System Basic OperationuSystem Updates*  
Update the audio system  
1. Press the  
button.  
2. Select System Updates.  
3. Select via USB.  
u A notification appears on the screen.  
4. Connect the USB device with the update  
files into the USB port.  
u A notification appears on the screen.  
5. Select Install Now.  
u A notification appears on the screen if  
the update is successful.  
271  
uuAudio System Basic OperationuAdjusting the Sound  
Adjusting the Sound  
1. Press the  
button.  
2. Select an audio source icon.  
3. Select Sound.  
4. Select the setting you want.  
5. Select Save.  
The SVC adjusts the volume level based on the  
vehicle speed. As you go faster, audio volume  
increases. As you slow down, audio volume  
decreases.  
You can also adjust the sound by the following  
procedure.  
1. Press the  
button.  
2. Select Settings.  
3. Select Sound.  
Select an item from the following choices:  
Bass / Treble: Treble, Midrange, Bass,  
Subwoofer*  
Balance / Fader: Balance, Fader  
DTS Neural Surround*: DTS Neural  
SurroundTM  
To reset each setting for Bass / Treble, Balance /  
Fader, DTS Neural Surround* and Speed Volume  
Compensation select Default.  
Speed Volume Compensation: Speed  
Volume Compensation (SVC)  
* Not available on all models  
272  
 
uuAudio System Basic OperationuDisplay Setup  
Display Setup  
You can change the brightness of the audio/information screen.  
Changing the Screen Brightness  
You can change the Contrast and Black Level  
settings in the same manner.  
1. Press the  
2. Select Settings.  
button.  
3. Select Display.  
To reset the settings, select Default.  
4. Select Day Mode or Night Mode.  
5. Select the setting you want.  
6. Select Save.  
Continued  
273  
   
uuAudio System Basic OperationuDisplay Setup  
Selecting an Audio Source  
Select the source icon  
Source Select Screen  
Source List Icons  
SOURCE Button  
Select the current source icon or press the SOURCE button, then select an icon on  
the source list to switch the audio source.  
Limitations for Manual Operation*  
Certain manual functions are disabled or inoperable while the vehicle is in motion.  
You cannot select a grayed-out option until the vehicle is stopped.  
* Not available on all models  
274  
uuAudio System Basic OperationuVoice Control Operation  
Voice Control Operation  
Your vehicle has a voice control system that allows hands-free operation.  
The voice control system uses the  
(talk) and  
(back) buttons on the steering  
When you press the  
button, a helpful prompt asks  
what you would like to do. Press and release the  
button again to bypass this prompt and give a  
command.  
wheel and a microphone near the map lights on the ceiling.  
Voice Recognition  
To achieve optimum voice recognition when using the voice control system:  
Make sure the correct screen is displayed for the voice command that you are  
using.  
The system recognizes only certain commands.  
Available voice commands:  
Close the windows and moonroof*.  
Adjust the dashboard and side vents so air does not blow onto the microphone  
on the ceiling.  
Speak clearly in a clear, natural speaking voice without pausing between words.  
Reduce any background noise if possible. The system may misinterpret your  
command if more than one person is speaking at the same time.  
* Not available on all models  
Continued  
275  
 
uuAudio System Basic OperationuVoice Control Operation  
FM Commands  
FM  
Tune to <87.7-107.9> FM  
Voice Portal Screen  
Phone Commands  
These commands can only be used when a  
phone is connected. When the system  
recognizes a Phone command, the screen  
will change to the dedicated phone voice  
recognition screen.  
AM Commands  
AM  
Tune to <530-1710> AM  
Phone Commands  
Sirius XM Commands*  
Sirius XM  
Channel <1-999>  
Channel <station name>  
Phone  
Call <Your Contact Name>  
Call <Phone Number>  
When the  
(talk) button is pressed,  
available voice commands appear on the  
screen.  
For a complete list of commands, say “Voice  
Help” after the beep.  
The system only recognizes contact names  
stored in the phonebook of your phone. If a  
full name is registered in the first name  
field, the system will recognize the first  
name and last name as one contact name.  
USB Commands  
USB  
Play genre <Genre name>  
Play Artist <Artist name>  
Play Album <Album name>  
Play Playlist <Playlist name>  
Play Song <Song name>  
Play Music  
The system only recognizes the commands  
on the following pages, at certain screens.  
Free-form voice commands are not  
recognized.  
Phone commands are not available if using  
Apple CarPlay.  
Audio Commands  
List Genre <Genre name>  
List Artist <Artist name>  
List Album <Album name>  
List Playlist <Playlist name>  
When the system recognizes an Audio  
command, the screen will change to the  
dedicated audio voice recognition screen.  
* Not available on all models  
276  
 
uuAudio System Basic OperationuVoice Control Operation  
Navigation Commands*1  
The system will accept navigation voice  
commands when on the dedicated voice  
command screen for navigation.  
2 Refer to the Navigation System Manual  
Standard Commands  
Voice Help  
Cancel  
Back  
Voice Help provides guidance for the  
current screen.  
*1: Models with navigation system  
277  
uuAudio System Basic OperationuPlaying AM/FM Radio  
Playing AM/FM Radio  
Audio/Information Screen  
Settings Icon  
Select whether to tune to HD  
RadioTM* automatically.  
(Back) Button  
Press to go back to the previous  
display.  
Preset Icons  
Tune the radio frequency for  
preset memory.  
Select and hold the preset icon to  
store that station. Select > to  
display beyond preset 5.  
Seek Buttons  
Press  
or  
to search up and  
down the selected band for a  
station with a strong signal.  
Selector knob  
Turn to tune the radio frequency.  
Press, and then turn to select an item. After  
that, press again to make your selection.  
VOL/ AUDIO (Volume/Power) Knob  
Push to turn the audio system on and off.  
Turn to adjust the volume.  
Scan Icon  
Select to scan each station with a strong signal.  
Tune Icon  
Select to use the on-screen keyboard for  
entering the radio frequency directly.  
* Not available on all models  
278  
 
uuAudio System Basic OperationuPlaying AM/FM Radio  
Preset Memory  
The ST indicator appears on the display indicating  
stereo FM broadcasts.  
Stereo reproduction in AM is not available.  
To store a station:  
1. Tune to the selected station.  
2. Select and hold the preset icon for the station you want to store.  
Switching the Audio Mode  
Roll the left selector wheel or select the audio source  
icon on the screen.  
Station List  
Lists the strongest stations on the selected band.  
1. Select Station List to display a list.  
2. Select the station.  
You can store 12 AM/FM stations into preset memory.  
Models with HD RadioTM feature  
Manual update  
HD Radio Technology manufactured under license  
from iBiquity Digital Corporation. U.S. and Foreign  
Patents. For patents see http://dts.com/patents. HD  
Radio, Artist Experience, and the HD, HD Radio, and  
“ARC” logos are registered trademarks or  
trademarks of iBiquity Digital Corporation in the  
United States and/or other countries.  
Updates your available station list at any time.  
1. Select Station List to display a list.  
2. Select Refresh.  
Continued  
279  
 
uuAudio System Basic OperationuPlaying AM/FM Radio  
Scan  
Samples each of the strongest stations on the selected band for 10 seconds. To turn  
off scan, select Stop or  
.
Radio Data System (RDS)  
When you select an RDS-capable FM station, the RDS  
automatically turns on, and the frequency display  
changes to the station name. However, when the  
signals of that station become weak, the display  
changes from the station name to the frequency.  
Provides text data information related to your selected RDS-capable FM station.  
To find an RDS station from Station List  
1. Select Station List to display a list while listening to an FM station.  
2. Select the station.  
Manual update  
Updates your available station list at any time.  
1. Select Station List to display a list while listening to an FM station.  
2. Select Refresh.  
280  
 
uuAudio System Basic OperationuPlaying AM/FM Radio  
Models with HD RadioTM feature  
HD Subchannel  
Displays the subchannel list when an HD RadioTM station is selected while listening to  
an FM station.  
1. Select HD Radio Channels.  
2. Select the channel number.  
AM/FM Settings  
Change the AM/FM settings.  
1. Select Settings.  
2. Select an option.  
HD Radio: Automatically choose a digital or an analog channel, or listen to  
analog only.  
Artwork: Turns the artwork display on and off.  
281  
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Playing SiriusXM® Radio*  
Audio/Information Screen  
Settings Icon  
Album Art  
Select settings to display and  
customize siriusXM® settings.  
(Back) Button  
Preset Icons  
Press to go back to the previous  
display.  
Tune the radio frequency for preset  
memory. Select and hold the preset  
icon to store that station. Select >  
to display beyond preset 5.  
Seek Buttons  
Press  
or  
to search up and  
down the selected band for a  
station with a strong signal.  
Selector knob  
Turn to change the channel.  
Press, and then turn to select an  
item. After that, press again to  
make your selection.  
VOL/ AUDIO (Volume/Power) Knob  
Push to turn the audio system on and  
off.  
Category Icons  
Turn to adjust the volume.  
Select  
or  
to display and select a SiriusXM® Radio category.  
Channel Icons  
Select  
or  
to the previous or next channel.  
Select and hold to rapidly skip 10 channels at a time.  
* Not available on all models  
282  
 
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
To Change the Tune Mode  
In the channel mode, all available channels are  
selectable. In the category mode, you can select a  
channel within a category (Jazz, Rock, Classical, etc.).  
1. Select Settings.  
2. Select Tune Mode.  
3. Select Channel or Category.  
There may be instances when SiriusXM® Radio does  
not broadcast all the data fields (artist name, title).  
This does not indicate a problem with your audio  
system.  
SiriusXM® Radio stations load in ascending order,  
which can take about a minute. Once they have  
loaded you will be able to scroll up or down to make  
your selections.  
Switching the Audio Mode  
Roll up or down the left selector wheel to select  
Audio or select the audio source icon on the screen.  
Tune Start:  
When you change to a preset channel, a song being  
played on that channel restarts from the beginning  
with this function. This can be turned on or off by the  
following procedure.  
1. Select Settings.  
2. Select Tune Start.  
3. Select ON or OFF.  
To change a category, select Category icons, or  
select More and then select Category List.  
* Not available on all models  
Continued  
283  
   
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Preset Memory  
You can store 12 SiriusXM® channels into the preset  
memory.  
To store a channel:  
1. Tune to the selected channel.  
2. Select and hold the preset number for the station you want to store.  
Multi-channel preset (for music channels only)  
You can store up to 10 of your preferred music channels per preset.  
1. Tune a station.  
TuneMix:  
The multi-channel preset function can be turned on  
or off by the following procedure.  
1. Select Settings.  
2. Select TuneMix.  
3. Select ON or OFF.  
2. Select and hold the preset number you  
want to add a music channel.  
3. Select Add to TuneMix or Create  
TuneMix.  
u A message appears if there are no  
available presets.  
When you want to replace the channel, select  
Replace preset.  
If you want to delete a channel, select Edit TuneMix,  
and then select the channel you want to delete.  
284  
   
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Listening to Featured Channels  
Up to ten featured channels by SiriusXM® can be  
Suggested channel listing received from SiriusXM® can be displayed and selected.  
displayed.  
1. Select Category List.  
2. Select Featured Favorite.  
Featured channel lists are at the top of the channel  
list.  
To switch the sorting method, select Number or  
Name on the upper right of the screen.  
Select Keypad to use the on-screen keyboard for  
entering the channel number directly.  
Continued  
285  
 
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Replay Function  
The system starts storing broadcast in memory when  
the power mode is turned ON. You can go back to  
the program from that point.  
The system can record up to the last 60 minutes broadcast of your currently tuned  
channel as well as the last 30 minutes broadcast of preset channels, starting from  
the moment you turn the vehicle on. If you tuned to preset channel, the system  
records up to 60 minutes of a broadcast instead of up to 30 minutes. You can  
rewind and replay the last 30 or 60 minutes of a broadcast.  
You can no longer replay any program once the  
power mode is turned off as it erases memory.  
You can check how long the program has been  
stored in memory from the audio/information screen.  
Move the position you want to replay by selecting  
or  
.
After 30 or 60 minutes of recording the system will  
automatically start deleting the oldest data.  
To play or pause on playback mode, select the play/pause icon.  
Audio/Information Screen  
(A)  
Returning to real-time broadcast  
Select and hold  
.
(C)  
(D)  
(B)  
(A): Shows how much time the replayed segment is  
behind the real-time broadcast  
(B): Replayed segment  
(C): Length stored in memory  
(D): Play/Pause icon  
286  
 
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Live Sports Alert  
The Pop-up appears and notifies you of a sports alert  
function.  
While listening to other channel, you can receive sports alerts such as scores from  
your favorite teams.  
To set up a favorite team  
1. Select Settings.  
Sports alerts cut in only when SiriusXM® mode is on.  
2. Select Sports Notifications Setup.  
3. Select Favorite Teams.  
4. Select + Add Favorite Team.  
5. Select a team.  
To set up an alert message  
1. Select Settings.  
2. Select Sports Notifications Setup.  
3. Select Notifications.  
4. Select Game Notifications or SportsFlash Game Play Notifications.  
5. Select Notifications.  
6. Select ON.  
7. Select a favorite team.  
Continued  
287  
   
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Traffic and Weather Information  
When traffic and weather information is received, a  
notification is displayed in the header area.  
You can receive traffic and weather information.  
1. Select Settings.  
2. Select Traffic & Weather Now Setup.  
3. Select Selected City.  
4. Select the region.  
288  
 
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Channel Schedule  
Select Keypad to use the on-screen keyboard for  
entering the channel number directly.  
You can view a channel schedule or receive an alert when your favorite program is  
about to start.  
To view a channel schedule  
1. Select More.  
2. Select Channel Schedule.  
To set up an alert message  
1. Select More.  
2. Select Channel Schedule.  
3. Select a program.  
4. Select Set Program Alert.  
5. Select Just Once or Every Time.  
The Pop-up appears and notifies you of an alert  
function.  
Selecting Just Once disables the alert feature next  
time you turn the power mode to ON.  
If you want to delete the alert, select Remove Alert.  
To enable an alert message, change settings for the  
alert function.  
Continued  
289  
   
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Manage Program Alert  
You can change settings for the alert function.  
To enable the alert function  
1. Select Settings.  
2. Select Manage Program Alerts.  
3. Select Notifications.  
4. Select ON or OFF.  
To remove an alert  
1. Select Settings.  
2. Select Manage Program Alerts.  
3. Select Alerts Set.  
4. Select  
u A confirmation message appears on the  
screen. Select Yes.  
on the alert you want to delete.  
290  
   
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
Scan  
The “Scan Songs in Presets” function is based on  
TuneScanTM technology of SiriusXM®.  
Sample each channel on the selected mode for 10 seconds.  
1. Select More.  
2. Select Scan.  
The “Featured Channels” function is based on  
Featured FavoritesTM technology of SiriusXM®.  
You can change a scan mode by the following procedure.  
1. Select Settings.  
2. Select Scan Mode.  
TuneScanTM and Featured FavoritesTM are registered  
trademarks of SiriusXM® Radio, Inc.  
3. Select Channel or Preset.  
To turn off scan, select Stop.  
Continued  
291  
 
uuAudio System Basic OperationuPlaying SiriusXM® Radio*  
SiriusXM® Settings  
Change the SiriusXM® settings.  
1. Select Settings.  
2. Select an option.  
TuneMix: Turns multiple channel mix preset on and off.  
Tune Mode: Choose whether to group by category or channel number when  
changing channels.  
Scan Mode: Select the scan mode from all channels or presets.  
Tune Start: Start the currently playing song at the beginning when you switch to  
a music channel preset.  
Sports Notifications Setup: Set to receive sports alerts such as scores from your  
favorite teams.  
Traffic & Weather Now Setup: Set to receive traffic and weather information.  
Manage Program Alerts: Change settings for the alert function.  
292  
uuAudio System Basic OperationuPlaying an iPod  
Playing an iPod  
Using your USB connector, connect the iPod to the USB port(s), then select the iPod  
mode.  
Audio/Information Screen  
Sound Icon  
Cover Art  
Select to display the sound  
settings.  
(Back) Button  
Press to go back to the previous  
display.  
Shuffle Icon  
Select to play all files in the current  
category in random order.  
Selector knob  
Track Buttons  
Turn to change songs.  
Press  
or  
to change songs.  
Press, and then turn to select an  
item. After that, press again to  
make your selection.  
Select and hold to move rapidly  
within a song.  
VOL/ AUDIO (Volume/Power) Knob  
Push to turn the audio system on and off.  
Turn to adjust the volume.  
Repeat Icon  
Select to repeat the current file.  
Play/Pause Icon  
Browse Icon  
Track Icons  
Select  
Select and hold to move rapidly within a song.  
Select to display the menu items.  
or  
to change songs.  
Continued  
293  
 
uuAudio System Basic OperationuPlaying an iPod  
How to Select a Song from the Music Search List  
Available operating functions vary on models or  
versions. Some functions may not be available on the  
vehicle’s audio system.  
1. Select Browse.  
2. Select a search category (e.g., Artists,  
Albums, etc.).  
If there is a problem, you may see an error message  
on the audio/information screen.  
3. Continue making selections until you find  
the song of your choice.  
If you operate the music app on your iPhone/iPod  
while the phone is connected to the audio system,  
you may no longer be able to operate the same app  
on the audio/information screen.  
Reconnect the device if necessary.  
If an iPhone is connected via Apple CarPlay, the iPod/  
USB source will be unavailable and audio files on the  
phone will be playable only within Apple CarPlay.  
294  
uuAudio System Basic OperationuPlaying an iPod  
How to Select a Play Mode  
Play Mode Menu Items  
Shuffle  
You can select shuffle and repeat modes when playing a file.  
Shuffle/Repeat  
Shuffle off: Shuffle mode to off.  
Shuffle All Songs: Plays all available songs in a  
selected list in random order.  
Repeatedly select the shuffle or repeat icon  
until you find a play mode option of your  
preference.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat Song: Repeats the current song.  
Repeat all: Repeats the all songs.  
To turn off a play mode  
Select the mode you want to turn off.  
295  
 
uuAudio System Basic OperationuPlaying a USB Flash Drive  
Playing a USB Flash Drive  
Your audio system reads and plays audio files on a USB flash drive in either MP3,  
WMA, AAC*1, FLAC, or WAV format.  
Connect your USB flash drive to the USB port(s), then select the USB mode.  
Audio/Information Screen  
Sound Icon  
Select to display the sound  
settings.  
Random Icon  
(Back) Button  
Select to play all files in the  
current category in random  
order.  
Press to go back to the previous  
display.  
Selector knob  
Seek Buttons  
Turn to change files.  
Press  
or  
to change files.  
Press and turn to select an item,  
then press to set your selection.  
Select and hold to move rapidly  
within a track.  
Repeat Icon  
Select to repeat the current file.  
VOL/ AUDIO (Volume/Power) Knob  
Push to turn the audio system on and off.  
Turn to adjust the volume.  
Play/Pause Icon  
Track Icons  
Select  
Browse Icon  
Select to display the menu items.  
or  
to change files.  
Select and hold to move rapidly within a track.  
*1:Only AAC format files recorded with iTunes are playable on this unit.  
296  
 
uuAudio System Basic OperationuPlaying a USB Flash Drive  
How to Select a File from the Music Search List  
Use the recommended USB flash drives.  
1. Select Browse.  
2. Select a search category (e.g., Artists,  
Albums, etc.).  
3. Continue making selections until you find  
the song of your choice.  
WMA files protected by digital rights management  
(DRM) cannot be played.  
The audio system displays The selected file cannot  
be played, then skips to the next file.  
If there is a problem, you may see an error message  
on the audio/information screen.  
Continued  
297  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
How to Select a Play Mode  
Play Mode Menu Items  
Random  
You can select repeat and random modes when playing a file.  
Random/Repeat  
Random off: Random mode to off.  
Random All Tracks: Plays all files in random  
order.  
Select random or repeat icon repeatedly until  
a desired mode.  
Random in Folder: Plays all files in the current  
folder in random order.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat track: Repeats the current folder.  
Repeat all: Repeats the all songs.  
To turn off a play mode  
Select the mode you want to turn off.  
298  
 
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
Playing Bluetooth® Audio  
Your audio system allows you to listen to music from your Bluetooth-compatible  
phone.  
Not all Bluetooth-enabled phones with streaming  
audio capabilities are compatible with the system. For  
a list of compatible phones:  
or call 1-888-528-7876.  
This function is available when the phone is paired and connected to the vehicle’s  
Bluetooth® HandsFreeLink® (HFL) system.  
Canada: For more information on smartphone  
compatibility, call 1-855-490-7351.  
Audio/Information Screen  
(Back) Button  
Press to go back to  
the previous  
display.  
Bluetooth Indicator  
Appears when your phone is  
connected to HFL.  
It may be illegal to perform some data device  
functions while driving.  
Only one phone can be used with HFL at a time.  
When there is more than one paired phone in the  
vehicle, the first paired phone the system finds is  
automatically connected.  
The connected phone for Bluetooth® Audio can be  
different.  
VOL/ AUDIO  
(Volume/  
Power) Knob  
Push to turn the  
If more than one phone is paired to the HFL system,  
there may be a delay before the system begins to play.  
Selector knob  
Turn to change groups. Press, and  
audio system on  
then turn to select an item. After  
and off.  
In some cases, the name of the artist, album, or track  
may not appear correctly.  
that, press again to make your  
Turn to adjust  
selection.  
the volume.  
Play/Pause Icon  
Some functions may not be available on some devices.  
Browse Icon  
Select to display the  
menu items.  
Track Icons  
If a phone is currently connected via Apple CarPlay or  
Android Auto, Bluetooth® Audio from that phone  
will be unavailable. However, you can have a second  
previously paired phone stream Bluetooth® Audio by  
Select  
or  
to change tracks.  
selecting  
from the Bluetooth® device list.  
Continued  
299  
 
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
To Play Bluetooth® Audio Files  
To play the audio files, you may need to operate your  
phone. If so, follow the phone maker’s operating  
instructions.  
1. Make sure that your phone is paired and  
connected to the system.  
Switching to another mode pauses the music playing  
from your phone.  
2. Select the Bluetooth® Audio mode.  
If the phone is not recognized, another HFL-  
compatible phone, which is not compatible  
for Bluetooth® Audio, may already be  
connected.  
You can change the connected phone by selecting  
Change device.  
To play or pause a file  
Select the play/pause icon.  
Searching for Music  
Depending on the Bluetooth® device you connect,  
some or all of the lists may not be displayed.  
1. Select Browse.  
2. Select a search category (e.g., Albums).  
3. Select an item.  
u The selection begins playing.  
300  
   
uuAudio System Basic OperationuHondaLink®  
HondaLink®  
HondaLink® connects you to the latest information from Honda. You can connect  
your phone wirelessly through Wi-Fi or Bluetooth®.  
If your vehicle has a telematics control unit (TCU), you  
can use HondaLink® without connecting the phone.  
The HondaLink® connect app is compatible with most  
iPhone and Android phones.  
To Connect to HondaLink®  
If the system is connected to the HondaLink® connect  
app through Bluetooth® and another Bluetooth®  
audio device is connected, the Bluetooth®  
connection to the HondaLink® connect app will be  
severed.  
Use the following procedure to connect to HondaLink®.  
To enable the HondaLink®  
You must consent to location sharing to enable the HondaLink®.  
Disable: Does not allow this consent.  
Some cell phone carriers charge for tethering and  
smartphone data use. Check your phone’s data  
subscription package.  
Enable Once: Allows only one time. (Shows  
again next time.)  
Always Enable: Allows anytime. (Never  
show again.)  
Continued  
301  
 
uuAudio System Basic OperationuHondaLink®  
To link with HondaLink®  
You may see the connection guide screen  
after launching HondaLink® when there is no  
connection available.  
HondaLink® Menu  
Connect  
Displays instruction messages when the vehicle needs service.  
Help & Support  
Displays tips for vehicle usage, and get support via roadside or customer service  
center.  
302  
uuAudio System Basic OperationuHondaLink®  
Message  
Displays helpful and important information from Honda.  
Vehicle Information and Message from Honda Tips  
You can check the messages that are received quickly in the shortcut operation.  
1. A notification appears and notifies you of a  
new message in the header area.  
Notification  
2. A notification is continuously displayed in  
the header area until the new message is  
read.  
Continued  
303  
 
uuAudio System Basic OperationuHondaLink®  
3. Select the system status icon to see the  
messages.  
When you update HondaLink®, you must keep the  
engine running and maintain a constant connection  
with HondaLink®.  
If the update is interrupted, the system will  
automatically resume the process. If, however, a  
week has elapsed since the process was first  
interrupted, you must repeat the process from the  
beginning.  
You can update HondaLink® by selecting Message  
from Honda on the HondaLink® menu.  
4. Select a new message to open.  
u If you have selected the update option  
for HondaLink®, follow the directions on  
the screen to complete the process.  
304  
uuAudio System Basic OperationuHondaLink® Service*  
HondaLink® Service*  
Is a subscription-based service that provides convenient features such as voice  
communication in case of emergency, online security, and one-on-one operator  
assistance.  
HondaLink® also provides services you can operate  
from the Internet or your smartphone.  
To subscribe to HondaLink®, or to get more  
information about all of its features, contact a Honda  
In Case of Emergency  
Automatic collision notification  
If your vehicle’s airbags deploy or if the unit  
detects that the vehicle is severely impacted,  
your vehicle automatically will attempt to  
connect to the HondaLink® operator. If  
connected, information about your vehicle, its  
location, and its condition can be sent to the  
operator*1; you also can speak to the operator  
when connected.  
Your vehicle may not be able to connect to the  
operator if the battery level is low, the line is  
disconnected, or you do not have adequate cellular  
coverage.  
You cannot use this emergency services when:  
You travel outside the HondaLink® service coverage  
areas.  
IMPORTANT: In a crash, HondaLink® will attempt to notify emergency services but  
NEITHER HONDA NOR ITS SERVICE PROVIDERS GUARANTEE THAT SUCH  
NOTIFICATION WILL OCCUR.  
There is a problem with the connecting devices,  
such as the microphones, speakers, or the unit  
itself.  
You cannot operate other phone-related functions  
using the screen while talking to the operator.  
Only the operator can terminate the connection to  
your vehicle.  
Honda reserves the right to terminate HondaLink® services at any time or for any  
reason, and in the future may not be able to provide services due to changes in, or  
obsolescence of, technology integral to the service or changes in governmental  
regulation.  
*1: Depending on your phone and adequate cellular coverage, your vehicle’s location may not  
be sent to the operator.  
If the unit fails to connect to the operator, it  
repeatedly tries until it succeeds.  
* Not available on all models  
Continued  
305  
     
uuAudio System Basic OperationuHondaLink® Service*  
Manual operator connection  
If you need to talk to the HondaLink® operator  
Do not press the button while driving. When you  
need to contact the operator, park the vehicle in a  
safe place.  
ASSIST  
Button  
in a situation where no airbag has deployed,  
you can manually connect to them by pressing  
the ASSIST button with the power mode in  
ACCESSORY or ON.  
1. Open the cover attached to the ceiling  
console.  
If the unit fails to connect to the operator, it  
automatically cancels the action after three minutes.  
If necessary, the cover can be broken to access the  
ASSIST button.  
2. Press the ASSIST button.  
u You are connected to the HondaLink®  
operator.  
306  
 
uuAudio System Basic OperationuHondaLink® Service*  
Security Features  
The contact information of your provider, your user  
ID and PIN will be given when you subscribe to  
HondaLink®. If you forget any of the above, contact a  
Honda dealer, or go to hondalink.honda.com.  
Your subscribed telematics service provider can track your vehicle’s location,  
remotely lock or unlock doors, and help you find your vehicle.  
To use these features, you need your user ID and personal identification number  
(PIN).  
You can also activate the remote door lock/unlock  
and vehicle finder features from the Internet or using  
your smartphone app. Ask a dealer, or visit  
Stolen vehicle tracking  
This feature searches and tracks down your vehicle position even if it is on the move.  
If you believe that your vehicle has been stolen, contact the police as well as the  
provider.  
Remote door lock/unlock  
The provider can remotely lock or unlock doors upon your request.  
Vehicle finder  
The lights will stop flashing and horn will stop  
sounding under the following:  
When conditions 30 seconds have elapsed.  
You unlock the doors using the remote transmitter.  
You unlock the doors using the keyless access  
system.  
This feature is convenient to use when trying to locate your vehicle in large areas,  
such as a crowded parking lot. If you cannot locate your vehicle after using the  
remote transmitter’s answerback function, you can contact the provider which can  
then flash your vehicle’s exterior lights and sound the horn, and sends vehicle  
location via web/Smartphone.  
You unlock the doors using the built-in key.  
The power mode is set to ACCESSORY or ON.  
Security alarm notification  
If the security system in your vehicle detects an abnormal condition, such as  
someone tampering with the lock on your vehicle, the provider notifies you by email.  
Continued  
307  
   
uuAudio System Basic OperationuHondaLink® Service*  
Operator Assistance  
Remain attentive to road conditions and driving  
during operator assistance.  
Connect to the HondaLink® operator when trying to find a destination or for  
roadside assistance.  
1. Press the LINK button.  
u Connection to the operator begins.  
2. Talk to the operator.  
u To disconnect, select Hang Up on the  
audio/information screen or press the  
button on the steering wheel.  
If you want to add or renew a subscription, call the  
Operator Assistance.  
1. Press the  
button.  
LINK  
Button  
2. Select HondaLink.  
3. Select HondaLink Subscription Status.  
Audio/information screen  
when connected to the  
HondaLink® operator.  
308  
 
uuAudio System Basic OperationuHondaLink® Service*  
Convenient Features  
The contact information of your provider, your user  
ID and PIN will be given when you subscribe to  
HondaLink®. If you forget any of the above, contact a  
Honda dealer, or go to hondalink.honda.com.  
Your subscribed telematics service provider can check your vehicle’s condition.  
Virtual Dashboard  
You can remotely check the mileage, fuel range, and oil life in your app.  
You cannot use Wi-Fi hotspots when you are  
connected wirelessly to Apple CarPlay or Android  
Auto.  
Remote Start and stop the engine  
You can remotely start and stop engine using your app as same as the keyless  
remote.  
Geofence Alert  
You can receive a notification anytime your vehicle enters or leaves a region set by  
you.  
Speed Alert  
You can receive a notification when your vehicle has exceeded a speed limit set by  
you.  
Personal Data Wipe  
You can reset your audio and navigation system settings to factory defaults with the  
app.  
Wi-Fi hotspot  
Vehicle provides 4G LTE network environment as Wi-Fi router to use tablet or  
smartphone in your vehicle.  
309  
 
uuAudio System Basic OperationuWi-Fi Connection  
Wi-Fi Connection  
This vehicle is equipped with Wi-Fi connectivity. You can connect to an external Wi-  
Fi hotspot or communication device.  
Wi-Fi and Wi-Fi Direct are registered trademarks of  
Wi-Fi Alliance®.  
Connect the Vehicle to a Wi-Fi Hotspot  
1. Press the  
2. Select Settings.  
button.  
You cannot go through the setting procedure while  
the vehicle is moving. Park in a safe place to set the  
audio system in Wi-Fi mode.  
3. Select Connections.  
4. Select Wi-Fi.  
5. Select Change Mode.  
6. Select Network or Hotspot, then  
Confirm.  
u To change the Wi-Fi settings, select  
Options or Setup.  
u Select the access point you want to  
connect to the system.  
Some cell phone carriers charge for tethering and  
smartphone data use. Check your phone’s data  
subscription package.  
Check your phone manual to find out if the phone  
has Wi-Fi connectivity.  
7. Select Connect.  
u Enter a password for the access point,  
and select Done.  
u When the connection is successful, the  
icon is displayed on the list.  
You can confirm whether Wi-Fi connection is on or  
off with the  
icon on the Wi-Fi network list.  
Transmission speed and others will not be displayed  
on this screen.  
In case of Wi-Fi connection with your phone, make  
sure your phone’s Wi-Fi setting is in access point  
(tethering) mode.  
8. Press the  
button to go back to the  
home screen.  
310  
   
uuAudio System Basic OperationuAT&T Hotspot*  
AT&T Hotspot*  
If you have subscribed to AT&T hotspot services, your vehicle will provide data to  
connect your mobile devices to the Internet. You can use the AT&T Hotspot app to  
turn on/off vehicle data and monitor data usage left on your subscription.  
To use AT&T Hotspot services, your vehicle must be  
subscribed to a data plan. If your vehicle is not  
subscribed to a data plan, you can visit www.att.com/  
honda to add vehicle data services.  
AT&T Hotspot Menu  
Hotspot username and password can be changed in  
the Settings of the AT&T Hotspot app. Settings  
cannot be accessed while driving. Park in a safe place  
to adjust Hotspot settings.  
Alternatively, you can use your mobile hotspot to  
connect the vehicle and other mobile devices to the  
Internet.  
a Hotspot Enable  
Turn on/off AT&T Hotspot.  
b Data Usage Bar  
Check the current status of your data plan. This Usage Bar will show your current  
plan and how much data remains on your plan. Subscription plans for AT&T  
Hotspot can be added/modified at www.att.com/honda.  
c Plan Info  
Shows your current AT&T subscription plan for the vehicle.  
d Settings  
Shows the current username and password for vehicle Hotspot. Settings can be  
changed while the vehicle is not in motion.  
e Help  
* Not available on all models  
311  
 
uuAudio System Basic OperationuSiri Eyes Free*  
Siri Eyes Free*  
You can talk to Siri by pressing and holding the  
(Talk) button on the steering  
wheel when your iPhone is paired to the Bluetooth® HandsFreeLink® (HFL) system.  
Siri is a trademark of Apple Inc.  
Check Apple Inc. website for features available for  
Siri.  
We recommend against using Siri other than in Siri  
Eyes Free while operating a vehicle.  
Using Siri Eyes Free  
Some commands work only on specific phone  
features or apps.  
(Back) Button  
Press to deactivate Siri.  
Appears when Siri is  
activated in Siri Eyes Free  
While in Siri Eyes Free:  
(Talk) Button  
The display remains the same.  
No feedback or commands  
appear.  
Press and hold until the display  
changes as shown.  
* Not available on all models  
312  
   
uuAudio System Basic OperationuApple CarPlay  
Apple CarPlay  
If you connect an Apple CarPlay-compatible iPhone to the system via the USB port  
in the center pocket or wirelessly*, you can use the audio/information screen,  
instead of the iPhone display, to make a phone call, listen to music, view maps  
(navigation), and access messages.  
Only iPhone 5 or newer versions with iOS 8.4 or later  
are compatible with Apple CarPlay.  
We recommend using the latest OS.  
Park in a safe place before connecting your iPhone to  
Apple CarPlay and when launching any compatible  
apps.  
Apple CarPlay Menu  
Home screen  
Apple CarPlay menu screen  
While connected to Apple CarPlay, calls are only  
made through Apple CarPlay. If you want to make a  
call with HandsFreeLink®, turn Apple CarPlay OFF.  
When your iPhone is connected to Apple CarPlay, it is  
not possible to use the Bluetooth® Audio or  
Bluetooth® HandsFreeLink®. However, other  
previously paired phones can stream audio via  
Bluetooth® while Apple CarPlay is connected.  
Select the Honda icon  
to go back to the  
home screen  
Apple CarPlay icon  
: Go back to the Apple  
CarPlay Dashboard screen  
: Go back to the Apple  
CarPlay menu screen  
Apple CarPlay and Android Auto cannot run at the  
same time.  
For details on countries and regions where Apple  
CarPlay is available, as well as information pertaining  
to function, refer to the Apple homepage.  
Phone  
Access the contact list, make phone calls, or listen to voicemail.  
Messages  
Check and reply to text messages, or have messages read to you.  
* Not available on all models  
Continued  
313  
 
uuAudio System Basic OperationuApple CarPlay  
Music  
Play music stored on your iPhone.  
Apple CarPlay Operating Requirements &  
Limitations  
Apple CarPlay requires a compatible iPhone with an  
active cellular connection and data plan. Your  
carrier’s rate plans will apply.  
Maps  
Display Apple Maps and use the navigation function just as you would on your  
iPhone.  
Models with navigation system  
Changes in operating systems, hardware, software,  
and other technology integral to providing Apple  
CarPlay functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Apple CarPlay functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Apple CarPlay performance or  
functionality.  
Only one navigation system (pre-installed navigation or Apple CarPlay) can give  
directions at a time. When you are using one system, directions to any prior  
destination set on the other system will be canceled, and the system you are  
currently using will direct you to your destination.  
It is possible to use 3rd party apps if they are  
compatible with Apple CarPlay. Refer to the Apple  
homepage for information on compatible apps.  
314  
uuAudio System Basic OperationuApple CarPlay  
Setting Up Apple CarPlay  
Only initialize Apple CarPlay when you are safely  
parked.  
When Apple CarPlay first detects your iPhone, you  
will need to set up your iPhone. Refer to the  
instruction manual that came with your iPhone.  
After you have connected your iPhone to the system via the front USB port or  
wirelessly*, use the following procedure to set up Apple CarPlay. Use of Apple  
CarPlay will result in the transmission of certain user and vehicle information (such  
as vehicle location, speed, and status) to your iPhone to enhance the Apple CarPlay  
experience. You will need to consent to the sharing of this information on the audio/  
information screen.  
You can also use the method below to set up Apple  
CarPlay:  
Models with wireless Apple CarPlay  
and wireless Android Auto  
Select HOME Settings Smartphone Connection  
Apple CarPlay Select device  
Models without wireless Apple CarPlay  
and wireless Android Auto  
Select HOME Settings Connections   
Smartphone Connection Apple CarPlay   
Select device  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your iPhone by Apple CarPlay is  
governed by the Apple iOS terms and conditions and  
Apple’s Privacy Policy.  
* Not available on all models  
Continued  
315  
 
uuAudio System Basic OperationuApple CarPlay  
Connecting Apple CarPlay Using the USB Cable to the USB  
Port  
1. Connect the iPhone to the USB port using the USB cable.  
u The confirmation screen will be displayed.  
2. Select Yes.  
u If you do not allow this consent, select No.  
You may change the consent settings under the Connections*1/Smartphone  
Connection*2 settings menu.  
Connect Apple CarPlay Wirelessly*  
Wireless Apple CarPlay and AT&T Hotspot cannot be  
used at the same time. When using Apple CarPlay  
and AT&T Hotspot at the same time, connect to  
Apple CarPlay with a USB cable.  
Connect Apple CarPlay wirelessly on the home screen  
1. Press the button.  
2. Select Smartphone Connection.  
3. Select + Connect New Device.  
4. Pair the iPhone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
5. Select Yes.  
u If your iPhone asks for permission to accept an Apple CarPlay connection,  
accept to connect.  
*1: Models without wireless Apple CarPlay and wireless Android Auto  
*2: Models with wireless Apple CarPlay and wireless Android Auto  
* Not available on all models  
316  
 
uuAudio System Basic OperationuApple CarPlay  
Connect Apple CarPlay wirelessly on the Apple CarPlay device list  
1. Press the button.  
2. Select Settings.  
3. Select Smartphone Connection.  
4. Select Apple CarPlay.  
5. Select + Connect New Device.  
6. Pair the iPhone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
7. Select Yes.  
u If your iPhone asks for permission to accept an Apple CarPlay connection,  
accept to connect.  
Connect Apple CarPlay wirelessly on the Bluetooth® device list  
1. Press the  
button.  
2. Select Settings.  
3. Select Connections.  
4. Select Bluetooth.  
5. Select + Connect New Device.  
6. Pair the iPhone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
7. Check the box on Apple CarPlay.  
u If you select Apple CarPlay, you cannot select Audio and Phone.  
8. Select Connect.  
9. Select Yes.  
u If your iPhone asks for permission to accept an Apple CarPlay connection,  
accept to connect.  
Continued  
317  
uuAudio System Basic OperationuApple CarPlay  
Connect Apple CarPlay wirelessly with the steering wheel  
1. Press and hold the  
(talk) button on the steering wheel.  
2. Pair the iPhone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
3. Check the box on Apple CarPlay.  
u If you select Apple CarPlay, you cannot select Audio and Phone.  
4. Select Connect.  
5. Select Yes.  
u If your iPhone asks for permission to accept an Apple CarPlay connection,  
accept to connect.  
318  
uuAudio System Basic OperationuApple CarPlay  
Operating Apple CarPlay with Siri  
Below are examples of questions and commands for  
Siri:  
Press and hold the talk button to activate Siri.  
What movies are playing today?  
Call dad at work.  
What song is this?  
How’s the weather tomorrow?  
Read my latest email.  
Find a table for four tonight in Chicago.  
For more information, please visit  
(Talk) button:  
Press and hold to activate Siri.  
Press again to deactivate Siri.  
Press and release to activate standard voice recognition system.  
319  
 
uuAudio System Basic OperationuAndroid Auto  
Android Auto  
When you connect an Android phone to the audio system via the front USB port or  
wirelessly*, Android Auto is automatically initiated. When connected via Android  
Auto, you can use the audio/information screen to access the Phone, Google Maps  
(Navigation), Google Play Music, and Google Now functions. When you first use  
Android Auto, a tutorial will appear on the screen.  
We recommend that you complete this tutorial while safely parked before using  
Android Auto.  
To use Android Auto, you need to download the  
Android Auto app from Google Play to your  
smartphone.  
Only Android 5.0 (Lollipop) or later versions are  
compatible with Android Auto.  
Bluetooth A2DP cannot be used while your phone is  
connected to Android Auto.  
Park in a safe place before connecting your Android  
phone to Android Auto and when launching any  
compatible apps.  
To directly access the Android Auto phone function,  
press Phone on the home screen.  
When your Android phone is connected to Android  
Auto, it is not possible to use the Bluetooth® Audio.  
However, other previously paired phones can stream  
audio via Bluetooth® while Android Auto is  
connected.  
Apple CarPlay and Android Auto cannot run at the  
same time.  
* Not available on all models  
320  
 
uuAudio System Basic OperationuAndroid Auto  
Android Auto Menu  
For details on countries and regions where Android  
Auto is available, as well as information pertaining to  
function, refer to the Android Auto homepage.  
6
Screens may differ depending on the version of the  
Android Auto app you are using.  
: Go back to the  
home screen  
Android Auto Operating Requirements &  
Limitations  
Android Auto requires a compatible Android phone  
with an active cellular connection and data plan.  
Your carrier’s rate plans will apply.  
Android Auto icon  
a Maps (Navigation)  
Display Google Maps and use the navigation function just as you would with your  
Android phone. When the vehicle is in motion, it is not possible to make keyboard  
entries. Stop the vehicle in a safe location to undertake a search or provide other  
inputs.  
Changes in operating systems, hardware, software,  
and other technology integral to providing Android  
Auto functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Android Auto functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Android Auto performance or  
functionality.  
Models with navigation system  
Only one navigation system (pre-installed navigation or Android Auto) can give  
directions at a time. When you are using one system, directions to any prior  
destination set on the other system will be canceled, and the system you are  
currently using will direct you to your destination.  
The audio/Information screen shows you turn-by-turn driving directions to your  
destination.  
It is possible to use 3rd party apps if they are  
compatible with Android Auto. Refer to the Android  
Auto homepage for information on compatible apps.  
b Phone (Communication)  
Make and receive phone calls as well as listen to voicemail.  
c Google Now (Home screen)  
Display useful information organized by Android Auto into simple cards that appear  
just when they’re needed.  
Continued  
321  
uuAudio System Basic OperationuAndroid Auto  
d Music and audio  
Play Google Play Music and music apps that are compatible with Android Auto.  
To switch between music apps, press this icon.  
e Go back to the Home Screen.  
f Voice  
Operate Android Auto with your voice.  
Auto Pairing Connection  
When you connect an Android phone to the unit via the front USB port or  
wirelessly*, Android Auto is automatically initiated.  
* Not available on all models  
322  
 
uuAudio System Basic OperationuAndroid Auto  
Connecting Android Auto Using the USB Cable to the USB Port  
Only initialize Android Auto when you are safely  
parked. When Android Auto first detects your phone,  
you will need to set up your phone so that auto  
pairing is possible. Refer to the instruction manual  
that came with your phone.  
1. Connect the Android phone to the USB port using the USB cable.  
u The confirmation screen will be displayed.  
2. Select Yes.  
u If you do not allow this consent, select No.  
You can use the method below to change Android  
Auto settings after you have completed the initial  
setup:  
Models with wireless Apple CarPlay  
and wireless Android Auto  
You may change the consent settings under the Connections*1/Smartphone  
Connection*2 settings menu.  
Select HOME Settings Smartphone Connection  
Android Auto Select device  
Models without wireless Apple CarPlay  
and wireless Android Auto  
Select HOME Settings Connections   
Smartphone Connection Android Auto   
Select device  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your phone by Android Auto is  
governed by the Google’s Privacy Policy.  
*1: Models without wireless Apple CarPlay and wireless Android Auto  
*2: Models with wireless Apple CarPlay and wireless Android Auto  
Continued  
323  
 
uuAudio System Basic OperationuAndroid Auto  
Connect Android Auto Wirelessly*  
Wireless Android Auto and AT&T Hotspot cannot be  
used at the same time. When using Android Auto  
and AT&T Hotspot at the same time, connect to  
Android Auto with a USB cable.  
Connect Android Auto wirelessly on the home screen  
1. Press the button.  
2. Select Smartphone Connection.  
3. Select + Connect New Device.  
4. Pair the Android phone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
5. Select Yes.  
u If your Android phone asks for permission to accept an Android Auto  
connection, accept to connect.  
Connect Android Auto wirelessly on the Android Auto device list  
1. Press the  
button.  
2. Select Settings.  
3. Select Smartphone Connection.  
4. Select Android Auto.  
5. Select + Connect New Device.  
6. Pair the Android phone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
7. Select Yes.  
u If your Android phone asks for permission to accept an Android Auto  
connection, accept to connect.  
* Not available on all models  
324  
 
uuAudio System Basic OperationuAndroid Auto  
Connect Android Auto wirelessly on the Bluetooth® device list  
1. Press the button.  
2. Select Settings.  
3. Select Connections.  
4. Select Bluetooth.  
5. Select + Connect New Device.  
6. Pair the Android phone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
7. Check the box on Android Auto.  
u If you select Android Auto, you cannot select Audio and Phone.  
8. Select Connect.  
9. Select Yes.  
u If your Android phone asks for permission to accept an Android Auto  
connection, accept to connect.  
Connect Android Auto wirelessly with the steering wheel  
1. Press and hold the  
(talk) button on the steering wheel.  
2. Pair the Android phone to the vehicle’s Bluetooth® HandsFreeLink® (HFL) system.  
3. Check the box on Android Auto.  
u If you select Android Auto, you cannot select Audio and Phone.  
4. Select Connect.  
5. Select Yes.  
u If your Android phone asks for permission to accept an Android Auto  
connection, accept to connect.  
Continued  
325  
uuAudio System Basic OperationuAndroid Auto  
Operating Android Auto with Voice Recognition  
Below are examples of commands you can give with  
voice recognition:  
Press and hold the talk button to operate Android Auto with your voice.  
Reply to text.  
Call my wife.  
Navigate to Honda.  
Play my music.  
Send a text message to my wife.  
Call flower shop.  
For more information, please refer to the Android  
Auto homepage.  
(Talk) button:  
You can also activate the voice recognition function  
Press and hold to operate Android Auto with your voice.  
Press and release to activate standard voice recognition system.  
by pressing the  
the screen.  
icon in the upper-right corner of  
326  
 
Audio Error Messages  
iPod/USB Flash Drive  
If an error occurs while playing an iPod or USB flash drive, you may see the following  
error messages. If you cannot clear the error message, contact a dealer.  
Error Message  
Solution  
Connect Retry  
Unplayable File  
Appears when the system does not acknowledge the iPod. Reconnect the iPod.  
Appears when the files in the USB flash drive are copyright protected or an unsupported  
format. This error message appears for about five seconds, then plays the next file.  
iPod  
Appears when the iPod is empty.  
USB flash drive  
No Data  
Appears when the USB flash drive is empty.  
iPod and USB flash drive  
Check that compatible files are stored on the device.  
Appears when an unsupported device is connected. If it appears when a supported  
device is connected, reconnect the device.  
Appears when unsupported formats are in the device. Check that compatible files are  
Unsupported  
stored on the device.  
Appears when the system does not communicate with a connected device. If it appears  
when a device is connected, contact your place of device purchase.  
Device No Response  
Appears when only a HUB is connected. If it appears, connect a USB flash drive to the  
HUB.  
USB hub not supported  
327  
   
uuAudio Error MessagesuAndroid/Apps  
Android/Apps  
If an error occurs while using the audio system or apps, you may see the following  
error messages. If you cannot clear the error message, contact a dealer.  
Error Message  
Solution  
Unfortunately, **** has  
stopped.*1  
Error has occurred within app, select OK on the screen to close the app.  
App is not responding.  
**** is not responding.  
Would you like to close  
it?*1  
Select Wait if you can wait for a response from app a little longer. If it does not respond even if you keep  
waiting, select OK to close the app and start it up. If the error message continues, perform Factory Data  
Reset.  
*1:****part is variable characters, and will change depending upon where an error  
occurs.  
328  
General Information on the Audio System  
SiriusXM® Radio Service*  
Subscribing to SiriusXM® Radio  
Contact Information for SiriusXM® Radio:  
US: SiriusXM® Radio at  
2349  
Canada: SiriusXM® Canada at  
0079  
1. You need your radio ID ready before registering for subscription. To see the ID in  
the screen, select Channel to 0.  
2. Have your radio ID ready, and either call or visit the SiriusXM® website to  
subscribe.  
Receiving SiriusXM® Radio  
Switch to the SiriusXM® mode by using the audio remote controls on the steering  
wheel, or through the audio/information screen, and stay in this mode for about 30  
minutes until the service is activated. Make sure your vehicle is in an open area with  
good reception.  
The SiriusXM® satellites are in orbit over the equator;  
therefore, objects south of the vehicle may cause  
satellite reception interruptions. Satellite signals are  
more likely to be blocked by tall buildings and  
mountains the farther north you travel from the  
equator.  
SiriusXM® Radio Display Messages  
Channel **** is not subscribed. Call SiriusXM to subscribe.*1  
You are not subscribed to the channel selected.  
Subscription updated:  
SiriusXM® radio is receiving information update from the network.  
Channel Not Available:  
You may experience reception problems under the  
following circumstances:  
In a location with an obstruction to the south of  
your vehicle.  
In tunnels.  
On the lower level of a multi-tiered road.  
Large items carried on the roof rack.  
No such channel exits, or the artist or title information is unavailable.  
No Signal:  
The signal is too weak in the current location.  
Check Tuner:  
There is a problem with the SiriusXM® tuner. Contact a dealer.  
Check Antenna:  
There is a problem with the SiriusXM® antenna. Contact a dealer.  
*1: ****part is variable characters, and will change depending upon where an subscribe.  
* Not available on all models  
329  
     
uuGeneral Information on the Audio SystemuCompatible iPod, iPhone, and USB Flash Drives  
Compatible iPod, iPhone, and USB Flash Drives  
iPod, and iPhone Model Compatibility  
This system may not work with all software versions  
of these devices.  
Model  
Made for iPod nano (7th generation) released in 2012  
The Lightning connector works with iPhone 5, iPhone  
5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPhone 6S,  
iPhone 6S Plus, iPhone SE, iPhone 7, iPhone 7 Plus,  
iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone  
XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone  
11 Pro Max, iPod touch (5th to 7th generation), iPod  
nano (7th generation).  
Made for iPod touch (5th to 7th generation) released between 2012 and 2019  
Made for iPhone 5/iPhone 5s/iPhone 5c/iPhone 6/iPhone 6 Plus/iPhone 6S/  
iPhone 6S Plus/iPhone SE/iPhone 7/iPhone 7 Plus/iPhone 8/iPhone 8 Plus/iPhone X/  
iPhone XS/iPhone XS Max/iPhone XR/iPhone 11/iPhone 11 Pro/iPhone 11 Pro Max  
USB works with iPhone 5, iPhone 5s, iPhone 5c,  
iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus,  
iPhone SE, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone  
8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone  
XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max,  
iPod touch (5th to 7th generation), iPod nano (7th  
generation).  
USB Flash Drives  
Files on the USB flash drive are played in their stored  
order. This order may be different from the order  
displayed on your PC or device.  
A USB flash drive of 256 MB or higher is recommended.  
Some digital audio players may not be compatible.  
Some USB flash drives (e.g., a device with security lockout) may not work.  
Some software files may not allow for audio play or text data display.  
Some versions of MP3, WMA, AAC, FLAC, or WAV formats may be unsupported.  
330  
   
uuGeneral Information on the Audio SystemuHonda App License Agreement  
Honda App License Agreement  
END USER LICENSE AGREEMENT  
PLEASE CAREFULLY READ THIS END USER LICENSE AGREEMENT (THIS “AGREEMENT”) WHICH GOVERNS YOUR USE OF THE SOFTWARE  
INSTALLED ON YOUR HONDA OR ACURA VEHICLE (YOUR “VEHICLE”) AS WELL AS THE APPLICATIONS, SERVICES, FUNCTIONS, AND  
CONTENT PROVIDED THROUGH THE SOFTWARE (COLLECTIVELY, THE “SERVICES”). YOUR USE OF THE SOFTWARE OR SERVICES WILL  
SERVE AS YOUR CONSENT TO THE TERMS OF THIS AGREEMENT. THE SOFTWARE IS OWNED (OR LICENSED), PROVIDED, AND/OR  
OPERATED BY AMERICAN HONDA MOTOR CO. INC., (“HONDA,” “US,” “WE,” OR “OUR”), WITH ITS BUSINESS ADDRESS AT 1919  
TORRANCE BLVD., TORRANCE, CA 90501. REFERENCE TO “HONDA” IN THIS AGREEMENT INCLUDES HONDA’S PARENT COMPANY AND  
ITS AFFILIATES AND DESIGNATED AGENTS. THE SERVICES ARE OWNED (OR LICENSED), PROVIDED, AND/OR OPERATED BY HONDA OR A  
THIRD-PARTY SERVICE PROVIDER (A “PROVIDER”). REFERENCE TO A “PROVIDER” IN THIS AGREEMENT INCLUDES SUCH PROVIDER’S  
PARENT COMPANY, AFFILIATES, AND DESIGNATED AGENTS.  
A. Description of the Software. The SOFTWARE includes the software, firmware and the like, installed and executing on your VEHICLE  
during manufacture, and thereafter updated from time to time by HONDA, you or an authorized HONDA dealer (a “DEALER”). The  
SOFTWARE allows you to access and use a variety of SERVICES, including but not limited to: (a) HONDA applications, services, and content  
provided through the SOFTWARE (together, “HONDA SERVICES”); and (b) PROVIDER applications, services, and content provided through  
the SOFTWARE (together, “PROVIDER SERVICES”), each of which may provide access to various information, media, content, and services.  
B. SOFTWARE Licensing and Intellectual Property.  
1. SOFTWARE. This AGREEMENT grants you a non-exclusive, limited, and revocable license to use the SOFTWARE and SERVICES solely (a)  
as installed on your VEHICLE by HONDA, (b) as updated on your Vehicle by HONDA, you (but only as and when directed by HONDA), or a  
DEALER and (c) as permitted under the terms of this AGREEMENT.  
2. HONDA Services. The SOFTWARE may provide you with access to various HONDA SERVICES. Installation, activation, or use of HONDA  
SERVICES may require your consent to additional terms, conditions, and privacy policies applicable to those HONDA SERVICES (the  
“HONDA TERMS”). You acknowledge and agree that any collection, use, sharing of data generated by your VEHICLE or your use of your  
VEHICLE, and your use of the HONDA SERVICES shall be subject to this AGREEMENT and any additional HONDA TERMS that may be  
specifically applicable to such HONDA SERVICES or data generation. The HONDA SERVICES may collect, use, and share such data while  
you are using the SOFTWARE.  
Continued  
331  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
3. Open-Source Software. The SOFTWARE and SERVICES may incorporate software licensed to HONDA under free or open-source  
licenses which govern HONDA’s distribution and your use of such software. HONDA and the third-party authors, licensors, and distributors  
of such software disclaim all warranties and all liability arising from any and all use or distribution of the software. To the extent such  
software is provided under terms that differ from the applicable free or open-source licenses, those terms are offered by HONDA alone.  
Additional information regarding free and open-source software incorporated in the SOFTWARE and SERVICES is available in this manual  
or within the SOFTWARE.  
4. Provider Services. The SOFTWARE may provide you with access to various PROVIDER SERVICES. Installation or use of such PROVIDER  
SERVICES may require your consent to additional terms, conditions, and privacy policies of the applicable PROVIDER (the “PROVIDER  
TERMS”). This AGREEMENT restricts the manner in which you can install and use PROVIDER SERVICES but does not grant you a license or  
permission to use such PROVIDER SERVICES. Your permission to use PROVIDER SERVICES is limited and subject to any license grants,  
conditions, and limitations included in the PROVIDER TERMS. You acknowledge that any collection, use, sharing of your information,  
targeted advertising practices by PROVIDERS, and your use of the PROVIDER SERVICES shall be subject to both this AGREEMENT and any  
applicable PROVIDER TERMS. The PROVIDER SERVICES may collect, use, and share such information while you are using the SOFTWARE.  
5. License Limitations and Restrictions on Use.  
(a) Limited License. You understand and agree that the SOFTWARE and SERVICES are licensed, not sold, to you solely for use in accordance  
with this AGREEMENT and any applicable PROVIDER TERMS, and any documentation for the VEHICLE made available to you by HONDA  
(any “DOCUMENTATION”). HONDA and its licensors reserve all rights in the SOFTWARE and HONDA SERVICES not expressly granted to  
you under this AGREEMENT. PROVIDERS and their licensors reserve all rights in the PROVIDER SERVICES not expressly granted to you under  
the applicable PROVIDER TERMS.  
332  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
(b) Restrictions on Use. The licenses granted under this AGREEMENT do not permit you to use the SOFTWARE or SERVICES on a device  
other than your VEHICLE. As a condition of using the SOFTWARE and SERVICES, you agree that you may not and will not:  
(1) copy, download, distribute, modify, publish, sell, rent, lease, lend, license, sublicense, reuse, or create derivative works of the  
SOFTWARE or SERVICES or any of the content or other material within the SOFTWARE or SERVICES, including without limitation,  
HONDA or PROVIDER names, logos, or any other trademarks of HONDA or PROVIDERS or used in association with the SOFTWARE or  
any SERVICES, except as required to use the SOFTWARE or SERVICES in accordance with this AGREEMENT, any applicable PROVIDER  
TERMS, and the DOCUMENTATION;  
(2) access or use the SOFTWARE or SERVICES in any manner intended to damage or impair the operation of the SOFTWARE or SERVICES  
or interfere with anyone else’s use and enjoyment of the SOFTWARE or SERVICES;  
(3) access or attempt to access any system or server on which the SOFTWARE or SERVICES is hosted or modify or alter the SOFTWARE  
or SERVICES in any way;  
(4) use the SOFTWARE or SERVICES for any unlawful purpose, or in violation of any third party rights;  
(5) use the SOFTWARE or SERVICES in violation of any applicable traffic regulations, rules or laws, including but not limited to any driver  
distraction laws, rules or regulations;  
(6) violate the terms of this AGREEMENT, any HONDA TERMS, any PROVIDER TERMS or other applicable third-party terms, conditions,  
and privacy policies; or  
(7) reverse engineer, decompile, disassemble, attempt to derive the source code of, nor permit others to reverse engineer, decompile,  
or disassemble, or attempt to derive the source code of the SOFTWARE or SERVICES, except and only to the extent that such activity is  
expressly permitted (a) by applicable law notwithstanding this limitation or (b) the terms of applicable free or opensource software  
licenses.  
6. Intellectual Property Rights. All title and intellectual property rights in and to the SOFTWARE and SERVICES, the accompanying  
DOCUMENTATION, and all copies of the SOFTWARE or SERVICES are owned by HONDA, PROVIDERS, or their suppliers or licensors. This  
AGREEMENT does not grant you any rights in connection with any trademarks or service marks of HONDA, PROVIDERS, or their licensors,  
affiliates, or suppliers.  
Continued  
333  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
7. Export Restrictions: You acknowledge that the SOFTWARE and SERVICES are subject to U.S., European Union, and other export  
jurisdictions. You agree to comply with all applicable international and national laws that apply to the SOFTWARE and SERVICES, including  
the U.S. Export Administration Regulations, as well as end-user, end-use, and destination restrictions issued by the U.S. and other  
governments.  
C. SOFTWARE Operation  
1. HONDA reserves the right to suspend or terminate your access to and use of the SOFTWARE or SERVICES if you are found to be in  
violation of this AGREEMENT or as reasonably deemed necessary by HONDA.  
2. Eligibility/Registration/Activation. The SOFTWARE is intended for and available to individuals who (a) are of legal age of majority in their  
jurisdiction of residence (and at least 18 years of age), or are younger than 18 years of age and possess a valid driver’s license issued by  
their jurisdiction of residence, and (b) own or have permissive access to a compatible VEHICLE. We do not knowingly collect any  
information, including personal information, from children under 13. If we learn or are notified that we have collected personal  
information of a child under 13, we will immediately take steps to delete such information.  
3. Use of PROVIDER SERVICES through the SOFTWARE. Certain PROVIDER SERVICES made available through the SOFTWARE may require  
that you register or otherwise have an account with the PROVIDER and agree to PROVIDER TERMS. Any use of any of such PROVIDER  
SERVICES within the SOFTWARE is subject to this AGREEMENT and the applicable PROVIDER TERMS. HONDA does not exercise control  
over such PROVIDER SERVICES and is not responsible or liable for the availability, security, or content of such PROVIDER SERVICES, and the  
inclusion of any PROVIDER SERVICES does not imply a referral from, the approval of, or the endorsement by HONDA of such PROVIDER  
SERVICES. HONDA is not responsible or liable, directly or indirectly, for any damage relating to or resulting from your use of the PROVIDER  
SERVICES.  
4. Links to Third Party Sites: The SOFTWARE may provide you with the ability to access third-party sites and content through the use of the  
SOFTWARE or SERVICES. The third-party sites and content are not under the control of HONDA. HONDA is not responsible or liable,  
directly or indirectly, for such third-party websites and their content or for any damage relating to or resulting from your access or use of  
such websites and content.  
334  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
5. Unauthorized Use and Abuse. You are responsible for ensuring your (and any authorized third parties’) use of the SOFTWARE and  
SERVICES remains in compliance with this AGREEMENT and all other applicable HONDA TERMS and PROVIDER TERMS. You acknowledge  
and agree that any use of the SOFTWARE or SERVICES occurring through your VEHICLE will be deemed your actions and that HONDA and  
PROVIDERS may rely upon such actions. You agree to immediately notify us if you suspect fraudulent or abusive activity involving the  
SOFTWARE or SERVICES. If you so notify us or if we otherwise suspect fraudulent or abusive activity, you agree to cooperate with us in any  
fraud investigation and to use any fraud prevention measures we prescribe. Your failure to immediately notify us or cooperate to use such  
measures will result in your liability for all fraudulent usage or abusive activity associated with your VEHICLE.  
6. SOFTWARE Updates. The SOFTWARE and SERVICES may be updated when your VEHICLE is serviced by a DEALER or remotely, over-the-  
air, by HONDA from time to time; such updates may occur with or without further notice or your future consent. The SOFTWARE may be  
updated at HONDA’s discretion and for any purpose including, without limitation, to patch or otherwise improve the SOFTWARE or  
SERVICES functionality, security, or stability. All updates to the SOFTWARE and SERVICES are subject to this AGREEMENT and any other  
applicable HONDA TERMS and PROVIDER TERMS.  
7. Uninstalling, Removing, and Replacing the SOFTWARE. Replacing SOFTWARE or HONDA SERVICES with software or firmware not  
provided and installed by HONDA or a DEALER will render all representations and warranties for the SOFTWARE, HONDA SERVICES, and  
VEHICLE functionality reliant upon the SOFTWARE or HONDA SERVICES null and void.  
D. SOFTWARE Operational Notices and Warnings  
1. Vehicle Geolocation Information. You acknowledge that your VEHICLE may be equipped with certain traffic and map features. The  
traffic feature will automatically collect and transmit, through GPS technology, your Vehicle’s current location (longitude and latitude),  
travel direction and speed (“VEHICLE GEOLOCATION INFORMATION”) to HONDA and PROVIDERS. The VEHICLE GEOLOCATION  
INFORMATION is used by HONDA and PROVIDERS to provide traffic and navigation-related information to you, but may also be used to  
provide other SERVICES or offers to you. HONDA will not use such VEHICLE GEOLOCATION INFORMATION for its own marketing efforts,  
or provide such information to unaffiliated third parties for their own purposes, without your express consent.  
Continued  
335  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
2. Potential Map Inaccuracy and Route Safety. Maps used by this system may be inaccurate because of changes in roads, traffic controls,  
routing, or driving conditions. Always use good judgment and common sense when following suggested routes. Do not follow the route  
suggestions if doing so would result in an unsafe or illegal driving maneuver, if you would be placed in an unsafe situation, or if you would  
be directed into an area that you consider unsafe. Do not rely on any navigation features included in the system to route you to emergency  
services. Not all emergency services such as police, fire stations, hospitals, or clinics are likely to be contained in the map database for such  
navigation features. Ask local authorities or an emergency services operator for such locations and routes. The driver is ultimately  
responsible for the safe operation of the vehicle and therefore, must evaluate whether it is safe to follow the suggested directions. Any  
navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing  
traffic regulations. Navigation features are not a substitute for your personal judgment. Any route suggestions made by the SOFTWARE or  
SERVICES should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.  
3. Speech Recognition: You acknowledge and understand that HONDA and PROVIDERS may record, retain, and use voices commands  
when you use the speech recognition components of the SOFTWARE or SERVICES. You and all VEHICLE operators and passengers (a)  
consent to the recording and retention of voice commands in support of providing speech recognition components and (b) release HONDA  
and PROVIDERS from all claims, liabilities, and losses that may result from any use of such recorded voice commands. Recognition errors  
are inherent in speech recognition. It is your responsibility to monitor any speech recognition functions included in the system and address  
any errors. Neither HONDA nor PROVIDERS will be liable for any damages arising out of errors in the speech recognition process.  
4. Distraction Hazards. Navigation features may require manual (non-verbal) input or setup. Attempting to perform such set-up or insert  
data while driving can seriously distract your attention and could cause a crash or other serious consequences; the ability to undertake such  
interactions may also be limited by state or local law, which laws you are responsible to know and follow. Even occasional short scans of  
the screen may be hazardous if your attention has been diverted away from your driving at a critical time. Pull over and stop the vehicle in  
a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Do not raise the volume  
excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable  
to hear these sounds could result in a crash.  
336  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
E. Information Collection and Storage  
1. Information Collection, Use, Transmission and Storage of Data. Consent to Use of Data: You agree that HONDA and PROVIDERS may  
collect and use your information gathered in any manner as part of product support services related to the SOFTWARE or related services.  
HONDA may share such information with third parties, including, without limitation, PROVIDERS, third party software and services  
suppliers, their affiliates and/or their designated agents, solely to improve their products or to provide services or technologies to you.  
HONDA, third party software and systems suppliers, their affiliates and/or their designated agent may disclose this information to others,  
but not in a form that personally identifies you.  
2. Information Storage. Depending on the type of multimedia system you have in your VEHICLE, certain information may be stored for ease  
of use of the SOFTWARE including, without limitation, search history, location history in certain applications, previous and saved  
destinations, map locations within certain applications, and device numbers and contact information.  
(a) Vehicle Health Information. Your VEHICLE may remotely transmit information regarding the status and health of your VEHICLE  
(“VEHICLE INFORMATION”) to HONDA without notification to you. VEHICLE INFORMATION may contain VEHICLE maintenance and  
malfunction status that is derived from VEHICLE diagnostic data and includes, but is not limited to, status of powered doors and windows,  
battery life data, battery charging data, VEHICLE speed, coolant temperature, air compressor revolution, output power, warning codes,  
diagnostic trouble codes, fuel injection volume, and engine rotations per minute. VEHICLE HEALTH INFORMATION may be used by HONDA  
for research and development, to deliver HONDA SERVICES and information to you, and to contact you, and is retained only for a period  
of time necessary to fulfill these goals.  
(b) VEHICLE Geolocation Data (non-navigation/map based). If you opt-in to geolocation-based SERVICES, your vehicle’s geolocation data  
(latitude and longitude) will be automatically sent from your VEHICLE to HONDA and PROVIDERS.  
(c) You understand that the inputting or uploading of information to your VEHICLE’s multimedia system or the SOFTWARE or SERVICES is  
at your own risk and that HONDA is not responsible for unauthorized access to or use of any personal or other information. All information  
uploaded to the SOFTWARE and SERVICES may be stored on your VEHICLES’s multimedia system and you understand that the security and  
safety of your VEHICLE’s multimedia system is your sole responsibility.  
Continued  
337  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
F. NO WARRANTY. You understand and agree that your use of the SOFTWARE and SERVICES are solely at your own risk and that you  
will be solely responsible for any damage to your VEHICLE’s multimedia system or any other equipment or any loss of data that may result  
from your use of the SOFTWARE or SERVICES. THE SOFTWARE AND SERVICES ARE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS  
WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED, IMPLIED OR STATUTORY. WE SPECIFICALLY DISCLAIM ANY IMPLIED WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. HONDA makes no warranties that the  
SOFTWARE or SERVICES will meet your requirements, or that the SOFTWARE or SERVICES will be uninterrupted, timely, secure, non-  
infringing or error free. You understand and agree that you are responsible for any and all charges, costs or expenses associated with your  
use of the SOFTWARE or SERVICES. Advice or information, whether oral or written, obtained by you from us or through the SOFTWARE  
or SERVICES are provided for informational purposes only and will not create any warranty not expressly made herein. You should not rely  
on any such information or advice. We assume no liability or responsibility for any errors or omissions in the SOFTWARE or SERVICES. We  
do not make any warranty or representation that your use of the material displayed on, or obtained through, the SOFTWARE or SERVICES  
is non-infringing of any rights of any third party. Any decision or action taken by you on the basis of information or content provided via  
the application is at your sole discretion and risk. HONDA and PROVIDERS are not responsible or liable for any such decision, or for the  
accuracy, completeness, usefulness, or availability of any content or information displayed, transmitted, or otherwise made available via  
the SOFTWARE or SERVICES. To the extent jurisdictions do not allow the exclusion of certain warranties, some of the above exclusions may  
not apply to you.  
G. LIMITATIONS ON LIABILITY. You and HONDA are each waiving important rights.  
1. Limitations on YOUR liability. HONDA cannot recover from you any consequential, indirect, incidental, or special damages, or attorney’s  
fees in connection with your use of the SOFTWARE or HONDA SERVICES. HONDA WAIVES TO THE FULLEST EXTENT ALLOWED BY LAW  
ANY CLAIM FOR DAMAGES OTHER THAN DIRECT, COMPENSATORY DAMAGES AS LIMITED IN THIS AGREEMENT.  
338  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
2. Limitation on HONDA and PROVIDER liability. Neither HONDA nor PROVIDERS will be liable to you or any other party for consequential,  
indirect, incidental, special, or punitive damages (including without limitation lost profits) in connection with your use of the SOFTWARE  
or SERVICES, even if HONDA or PROVIDERS are aware of the possibility of such damages. These limitations apply to all claims, including,  
without limitation, claims in contract and tort (such as negligence, product liability and strict liability). To the extent that a jurisdiction does  
not permit the exclusion or limitation of liability as set forth herein our liability is limited to the maximum extent permitted by law in such  
states. If HONDA or PROVIDERS are found liable to you for any reason, you agree that the aggregate liability of all these parties to you for  
any claim is limited to ten U.S. dollars (US $10.00). Neither HONDA nor any PROVIDER would have agreed to provide the SOFTWARE or  
SERVICES to you if you did not agree to this limitation. This amount is the sole and exclusive liability of HONDA and PROVIDERS to you,  
and is payable as liquidated damages and not as a penalty. Except where prohibited by law, you may not bring any claim against HONDA  
or any third-party beneficiary more than two (2) years after the claim arises. We do not have any liability for SOFTWARE or SERVICES  
interruptions of any length.  
(a) Release of HONDA and PROVIDERS For yourself and anyone else claiming under you, you agree to release and discharge HONDA,  
PROVIDERS, their respective officers, directors, and employees, and each third-party beneficiary from all claims, liabilities and losses in  
connection with the SOFTWARE or SERVICES, including, but not limited to claims for personal injury or property damage arising from the  
total or partial failure of performance of the SOFTWARE or SERVICES, even if caused by or based upon the negligence, gross negligence,  
strict products liability, Deceptive Trade Practices Act violations, bad faith, or breach of warranty of us or the malfunction of the SOFTWARE  
or SOFTWARE SERVICES. YOU AGREE TO WAIVE TO THE FULLEST EXTENT ALLOWED BY LAW, ANY CLAIM FOR DAMAGES OTHER THAN  
DIRECT, COMPENSATORY DAMAGES AS LIMITED IN THIS AGREEMENT. YOU HEREBY RELEASE AND DISCHARGE HONDA AND ITS  
LICENSORS AND CONTRACTORS (INCLUDING ANY THIRD PARTIES PROVIDING ALL OR PART OF THE SOFTWARE OR SERVICES) FROM AND  
AGAINST ANY CLAIMS, DAMAGES, EXPENSES AND LIABILITY ARISING FROM OR RELATED TO ANY INJURIES, DAMAGES, OR LOSSES TO  
ANY PERSON (INCLUDING DEATH) OR PROPERTY OF ANY KIND RESULTING IN WHOLE OR PART, DIRECTLY OR INDIRECTLY, FROM YOUR  
USE OF THE SOFTWARE OR SERVICES.  
H. Survival. You agree that the limitations of liability and indemnities in this AGREEMENT will survive even after the AGREEMENT has  
ended. These limitations of liability apply not only to you, but to anyone using the SOFTWARE or SERVICES via your VEHICLE, to anyone  
making a claim on your behalf, and to any claims made by your family, employees, customers, or others arising out of or relating to your  
VEHICLE, the SOFTWARE, or SERVICES.  
Continued  
339  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
I. Availability/Interruption. The SOFTWARE and certain SERVICES are made available through your VEHICLE’s compatible multimedia  
system when the VEHICLE is turned on. Certain SERVICES may be available only through your compatible mobile device when it is within  
the operating range of the VEHICLE and a wireless carrier. The availability of the SOFTWARE and SERVICES may be subject to transmission  
limitation or interruption, including but not limited to technical obsolesce or sunsetting of the hardware, software or firmware, inside of  
or external to the Vehicle, required for data transmission or receipt. HONDA does not guarantee that the SOFTWARE, SERVICES, or any  
portion thereof will be available at all times or in all areas. You acknowledge and agree that HONDA is not responsible for performance  
degradation, interruption or delays. You acknowledge that HONDA shall not be liable to you if the SOFTWARE or SERVICES in a given  
location are not available. If the SOFTWARE or SERVICES are not available within your intended location, you agree that your sole remedy  
shall be to cease using the SOFTWARE and SERVICES.  
J. PRODUCT SUPPORT: Product support for the SOFTWARE is provided by HONDA. For product support, please refer to HONDA  
instructions provided in the DOCUMENTATION. Should you have any questions concerning this AGREEMENT, or if you desire to contact  
HONDA for any other reason, please refer to the HONDA contact information provided in the DOCUMENTATION.  
K. Termination and Transfer.  
1. Termination. This AGREEMENT is effective until terminated by you or US. WE may terminate this AGREEMENT for any or no reason,  
and with or without notice to you. Your rights under this AGREEMENT will terminate automatically without notice from US if you fail to  
comply with any term of this AGREEMENT. Upon termination of this AGREEMENT, you shall cease all use of the SOFTWARE and SERVICES.  
2. Transfer: You may permanently transfer your rights under this AGREEMENT only as part of a sale or transfer of the VEHICLE, provided  
you retain no copies, you transfer all of the SOFTWARE and HONDA SERVICES (including all component parts, the media and printed  
materials, and any upgrades), and the recipient agrees to the terms of this AGREEMENT. You agree to notify HONDA upon the sale or  
transfer of the VEHICLE. To contact HONDA, please refer to the HONDA contact information provided in the DOCUMENTATION.  
340  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
L. Changes to the SOFTWARE or SERVICES. WE may change, modify, or update the SOFTWARE or SERVICES from time to time. Unless  
explicitly stated otherwise, any new features or services that augment or enhance the SOFTWARE or SERVICES in the future shall  
respectively be considered part of the SOFTWARE or SERVICES and subject to this AGREEMENT. WE reserve the right at any time and from  
time to time to interrupt, restrict, modify, suspend, discontinue, temporarily or permanently, the SOFTWARE or SERVICES (or any portion  
thereof), with or without notice to you, and you agree that HONDA shall not be liable to you or to any third party for any modification,  
suspension or discontinuance of the SOFTWARE or SERVICES.  
M. ARBITRATION:  
PLEASE READ THIS ARBITRATION PROVISION CAREFULLY TO UNDERSTAND YOUR RIGHTS. YOU AGREE THAT ANY CLAIM THAT YOU  
MAY HAVE IN THE FUTURE MUST BE RESOLVED THROUGH BINDING ARBITRATION. YOU WAIVE THE RIGHT TO HAVE YOUR DISPUTE  
HEARD IN COURT AND WAIVE THE RIGHT TO BRING CLASS CLAIMS. YOU UNDERSTAND THAT DISCOVERY AND APPEAL RIGHTS ARE  
MORE LIMITED IN ARBITRATION.  
Arbitration is a method of resolving a claim, dispute or controversy without filing a lawsuit. By agreeing to arbitrate, the right to go to  
court is waived and instead claims, disputes or controversies are submitted to binding arbitration. This provision sets forth the terms and  
conditions of our agreement. YOU and HONDA agree and acknowledge that this Agreement affects interstate commerce and the  
Federal Arbitration Act (“FAA”) applies. By using the Software, Vehicle, or Services, YOU elect to have disputes resolved by arbitration.  
YOU, HONDA or any involved third party may pursue a Claim. “Claim” means any dispute between YOU, HONDA, or any involved third  
party relating to your use of the Software, the Vehicle, or the Services, this Agreement, or our relationship, including any  
representations, omissions or warranties. “Claim” does not include personal injury or wrongful death claims. YOU or HONDA may seek  
remedies in small claims court or provisional judicial remedies without arbitrating. In addition, notwithstanding anything herein to the  
contrary, YOU or HONDA may seek equitable relief in a court of competent jurisdiction.  
YOU or HONDA may select arbitration with American Arbitration Association, JAMS or National Arbitration and Mediation. Contact  
these sponsors for their rules. The hearing will be in the federal district where YOU reside. If agreed, it may be by telephone or written  
submissions. Filing and arbitrator fees to be paid per the sponsor rules. You may contact the sponsor for a fee waiver. If no fee waivers,  
HONDA will pay filing and arbitrator fees up to $5,000, unless law requires more. Each party is responsible for other fees. Arbitrator  
may award costs or fees to prevailing party, if permitted by law. HONDA will not seek fees, unless the claims are frivolous.  
Continued  
341  
uuGeneral Information on the Audio SystemuHonda App License Agreement  
Arbitrator shall be an attorney or current or retired judge familiar with automotive or consumer software. The arbitrator shall follow  
substantive law, statute of limitations and decide all issues relating to the interpretation, construction, enforceability and applicability of  
this provision. The arbitrator may order relief permitted by law. This provision is governed and enforceable by the FAA. An award shall  
include a written opinion and be final, subject to appeal by the FAA.  
This provision survives termination of this Agreement or relationship, bankruptcy, assignment or transfer. If part of this provision is  
unenforceable, the remainder remains in effect. If unenforceability allows arbitration as a class action, then this provision is entirely  
unenforceable. YOU may opt out within 30 days of your initial use of the Software by sending a signed, written notice to HONDA at  
Honda Financial Services, P.O. Box 165007, Irving, TX 75016. HONDA reserves the right to make changes to this provision after  
providing written notice and an opportunity to opt out.  
N. Miscellaneous: You may not assign this AGREEMENT without HONDA’s prior written consent. This AGREEMENT and any additional  
HONDA TERMS and PROVIDER TERMS represents the entire agreement between you and US. HONDA may amend the terms of this  
AGREEMENT by providing you with notices of such updated terms. If you do not consent to be bound by the updated terms, your sole  
remedy will be to cease using the SOFTWARE and SERVICES. If any part of this AGREEMENT is found invalid, void, or unenforceable, the  
balance of the AGREEMENT will remain valid and enforceable according to its terms. To the fullest extent permitted by law, and except as  
explicitly provided otherwise, this AGREEMENT and any disputes arising out of or relating to it will be governed by the laws of the State of  
California, except that California laws concerning choice of law or conflicts shall not apply if they would cause the substantive law of  
another jurisdiction to apply. Notwithstanding the foregoing, Section M shall be governed by the Federal Arbitration Act and the laws of  
the State of California, as applicable, as set forth therein. The failure to enforce any term of this AGREEMENT on one occasion shall not  
prevent enforcement on any other occasion or the enforcement of any other term. Headings and captions shall not be considered included  
for purposes of interpretation or application hereof, but are for convenience only.  
342  
uuGeneral Information on the Audio SystemuLegal Information on Apple CarPlay/Android Auto  
Legal Information on Apple CarPlay/Android Auto  
OWNER’S MANUAL LICENSE/LIABILITY STATEMENTS  
USE OF APPLE CARPLAY IS SUBJECT TO YOUR AGREEMENT TO THE CARPLAY TERMS OF USE, WHICH ARE INCLUDED AS PART OF THE  
APPLE iOS TERMS OF USE. IN SUMMARY, THE CARPLAY TERMS OF USE DISCLAIM APPLE AND ITS SERVICE PROVIDERS’ LIABILITY IF THE  
SERVICES FAIL TO PERFORM CORRECTLY OR ARE DISCONTINUED, STRICTLY LIMIT APPLE AND ITS SERVICE PROVIDERS’ OTHER  
LIABILITIES, DESCRIBE THE KINDS OF USER INFORMATION (INCLUDING, FOR EXAMPLE, VEHICLE LOCATION, VEHICLE SPEED, AND  
VEHICLE STATUS) BEING GATHERED AND STORED BY APPLE AND ITS SERVICE PROVIDERS, AND DISCLOSE CERTAIN POSSIBLE RISKS  
ASSOCIATED WITH THE USE OF CARPLAY, INCLUDING THE POTENTIAL FOR DRIVER DISTRACTION. SEE APPLE’S PRIVACY POLICY FOR  
DETAILS REGARDING APPLE’S USE AND HANDLING OF DATA UPLOADED BY CARPLAY.  
USE OF ANDROID AUTO IS SUBJECT TO YOUR AGREEMENT TO THE ANDROID AUTO TERMS OF USE WHICH MUST BE AGREED TO WHEN  
THE ANDROID AUTO APPLICATION IS DOWNLOADED TO YOUR ANDROID PHONE. IN SUMMARY, THE ANDROID AUTO TERMS OF USE  
DISCLAIM GOOGLE AND ITS SERVICE PROVIDERS’ LIABILITY IF THE SERVICES FAIL TO PERFORM CORRECTLY OR ARE DISCONTINUED,  
STRICTLY LIMIT GOOGLE AND ITS SERVICE PROVIDERS’ OTHER LIABILITIES, DESCRIBE THE KINDS OF USER INFORMATION (INCLUDING,  
FOR EXAMPLE, VEHICLE LOCATION, VEHICLE SPEED, AND VEHICLE STATUS) BEING GATHERED AND STORED BY GOOGLE AND ITS  
SERVICE PROVIDERS, AND DISCLOSE CERTAIN POSSIBLE RISKS ASSOCIATED WITH THE USE OF ANDROID AUTO, INCLUDING THE  
POTENTIAL FOR DRIVER DISTRACTION. SEE GOOGLE’S PRIVACY POLICY FOR DETAILS REGARDING GOOGLE’S USE AND HANDLING OF  
DATA UPLOADED BY ANDROID AUTO.  
Continued  
343  
uuGeneral Information on the Audio SystemuLegal Information on Apple CarPlay/Android Auto  
DISCLAIMER OF WARRANTIES; LIMITATION ON LIABILITY  
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF APPLE CARPLAY OR ANDROID AUTO (“THE APPLICATIONS”) IS AT YOUR  
SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU TO THE  
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND THAT THE APPLICATIONS AND INFORMATION ON THE APPLICATIONS IS  
PROVIDED “AS IS” AND “AS AVAILABLE,” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND HONDA HEREBY  
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLICATIONS AND INFORMATION ON THE APPLICATIONS,  
EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF  
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, QUIET ENJOYMENT, AND NON-  
INFRINGEMENT OF THIRD PARTY RIGHTS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY HONDA OR AN AUTHORIZED  
REPRESENTATIVE SHALL CREATE A WARRANTY. AS EXAMPLES, AND WITHOUT LIMITATION, HONDA DISCLAIMS ANY WARRANTY  
REGARDING THE ACCURACY OF DATA PROVIDED BY THE APPLICATIONS, SUCH AS THE ACCURACY OF DIRECTIONS, ESTIMATED  
TRAVEL TIME, SPEED LIMITS, ROAD CONDITIONS, NEWS, WEATHER, TRAFFIC, OR OTHER CONTENT PROVIDED BY APPLE, GOOGLE, THEIR  
AFFILIATES, OR THIRD PARTY PROVIDERS; HONDA DOES NOT GUARANTEE AGAINST LOSS OF APPLICATION DATA, WHICH MAY BE LOST  
AT ANY TIME; HONDA DOES NOT GUARANTEE THAT THE APPLICATIONS OR ANY SERVICES PROVIDED THROUGH THEM WILL BE  
PROVIDED AT ALL TIMES OR THAT ANY OR ALL SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION. FOR EXAMPLE,  
SERVICES MAY BE SUSPENDED OR INTERRUPTED WITHOUT NOTICE FOR REPAIR, MAINTENANCE, SECURITY FIXES, UPDATES, ETC.,  
SERVICES MAY BE UNAVAILABLE IN YOUR AREA OR LOCATION, ETC. IN ADDITION, YOU UNDERSTAND THAT CHANGES IN THIRD PARTY  
TECHNOLOGY OR GOVERNMENT REGULATION MAY RENDER THE SERVICES AND/OR APPLICATIONS OBSOLETE AND/OR UNUSABLE.  
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL HONDA OR ITS AFFILIATES BE LIABLE FOR PERSONAL INJURY, OR ANY  
INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR  
LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY  
OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO THE APPLICATIONS OR YOUR USE OF OR INABILITY TO  
USE THE APPLICATIONS OR INFORMATION ON THE APPLICATIONS, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY  
(CONTRACT, TORT OR OTHERWISE) AND EVEN IF HONDA WERE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES AND  
JURISDICTIONS DISALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR DAMAGES, SO THESE LIMITATIONS AND EXCLUSIONS MAY  
NOT APPLY TO YOU. IN NO EVENT SHALL HONDA’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES (OTHER THAN AS MAY BE REQUIRED  
BY APPLICABLE LAW IN CASES INVOLVING PERSONAL INJURY) EXCEED THE AMOUNT OF FIVE DOLLARS ($5.00). THE FOREGOING  
LIMITATIONS WILL APPLY EVEN IF THE ABOVE STATED REMEDY FAILS OF ITS ESSENTIAL PURPOSE.  
344  
uuGeneral Information on the Audio SystemuAbout Open Source Licenses  
About Open Source Licenses  
To see the open source license information, follow these steps.  
Models with Telematics Control Unit  
1. Press the  
2. Select Settings.  
3. Select System.  
4. Select About.  
5. Select Legal Information.  
6. Select License.  
button.  
Free/Open Source Software Information  
This product contains Free/Open Source  
Software(FOSS).  
The license information and/or the source code of  
such FOSS can be found at the following URL:  
345  
 
uuGeneral Information on the Audio SystemuLicense Information*  
License Information*  
DOLBY DIGITAL  
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro  
Logic, and the double-D symbol are trademarks of Dolby Laboratories.  
DTS  
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS  
Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are  
registered trademarks of DTS, Inc.©DTS, Inc. All Rights Reserved.  
* Not available on all models  
346  
uuGeneral Information on the Audio SystemuLicense Information*  
Bluetooth  
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by PANASONIC CORPORATION is under license.  
Other trademarks and trade names are those of their respective owners.  
Windows Media  
This product is protected by certain intellectual property rights of Microsoft. Use or  
distribution of such technology outside of this product is prohibited without a  
license from Microsoft.  
Continued  
347  
uuGeneral Information on the Audio SystemuLicense Information*  
Apple  
“Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has  
been designed to connect specifically to iPod, or iPhone, respectively, and has been  
certified by the developer to meet Apple performance standards. Apple is not  
responsible for the operation of this device or its compliance with safety and  
regulatory standards. Please note that the use of this accessory with iPod, or iPhone,  
may affect wireless performance.  
Apple, the Apple Logo, iPhone, iPod nano, iPod touch are trademarks of Apple Inc.,  
registered in the U.S. and other countries. Apple CarPlay, and Lightning are  
trademarks of Apple Inc. App Store is a service mark of Apple Inc.  
348  
uuGeneral Information on the Audio SystemuLicense Information*  
MPEG  
Mpeg4 Visual  
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO  
LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR  
(i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUALA STANDARD  
(“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED  
BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY  
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO  
PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY  
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO  
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE  
OBTAINED FROM MPEG LA, LLC.  
VC-1  
THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE  
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO  
IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR (ii) DECODE  
VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL  
AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL  
BE IMPLIED FOR ANY OTHER USE.  
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE  
Continued  
349  
uuGeneral Information on the Audio SystemuLicense Information*  
AVC/H.264  
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE  
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN  
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE  
AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL  
AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL  
BE IMPLIED FOR ANY OTHER USE.  
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE  
SDHC Memory Card  
microSDHC Logo is a trademark of SD-3C, LLC.  
350  
Customized Features  
Use the audio/information screen to customize certain features.  
When you customize settings:  
Make sure that the vehicle is at a complete stop.  
Shift to (P.  
How to customize  
With the power mode in ON, select Settings, then select a setting item.  
To customize features detail, refer to the following.  
Audio/Information Screen  
Continued  
351  
 
uuCustomized Featuresu  
Customization flow  
Press the  
button.  
Day & Time  
Set Date & Time  
Time Zone  
Automatic Date &  
Time  
Select Settings.  
Set Date  
Set Time  
Automatic Time  
Zone*  
(Select time zone)  
Auto Daylight Saving  
Time  
Date Format  
Time Format  
Language  
System  
Touch Panel  
Sensitivity  
System Volumes  
Reading/Warning  
System Volumes  
Verbal Reminder  
Config. of  
Instrument Panel  
Select configuration  
Password  
Security  
Unknown sources  
* Not available on all models  
352  
 
uuCustomized Featuresu  
Caption  
Caption  
Accessibility  
Language  
Text Size  
Text-to-speech output  
Caption style  
Refuel  
recommend*  
Status  
About  
Legal Information  
Factory Data  
Reset  
Detail  
App Manager  
Information  
Recent Location  
Requests Apps  
* Not available on all models  
Continued  
353  
uuCustomized Featuresu  
Apple CarPlay  
Android Auto  
Wi-Fi  
+ Connect New Device  
Smartphone  
Connection*1  
(Saved Devices)  
+ Connect New Device  
(Saved Devices)  
Change Mode  
(Available Networks/Connected Devices)  
Connections  
Bluetooth  
+ Connect New Device  
(Saved Devices)  
Smartphone  
Connection*2  
Apple CarPlay  
Android Auto  
Day Mode  
Display  
Sound  
Night Mode  
Treble  
Midrange  
Bass  
Bass / Treble  
Subwoofer*  
Balance / Fader  
DTS Neural  
Surround*  
Speed Volume  
Compensation  
*1: Models with wireless Apple CarPlay and wireless Android Auto  
*2: Models without wireless Apple CarPlay and wireless Android Auto  
* Not available on all models  
354  
uuCustomized Featuresu  
TPMS Calibration  
Driver Assist  
System Setup  
Blind Spot Info*  
Head-up Warning*  
Traffic Sign Recognition System  
Forward Collision Warning Distance  
ACC Forward Vehicle Detect Beep  
Lane Keeping Assist Suspend Beep  
Road Departure Mitigation Setting  
Driver Attention Monitor  
Vehicle  
Meter Setup  
Language Selection  
Adjust Outside Temp. Display  
Rear Seat Reminder*  
Adjust Alarm Volume  
Reverse Alert Tone*  
Config. of Instrument Panel  
Fuel Efficiency Backlight  
“Trip A” Reset Timing  
“Trip B” Reset Timing  
Auto Engine Idle Stop Guidance Screens*  
Tachometer  
Speed/Distance Units  
Turn By Turn Auto Display  
* Not available on all models  
Continued  
355  
uuCustomized Featuresu  
Driving Position  
Setup*  
Memory Position Link  
Seat Position Movement at Entry/Exit  
Keyless Access  
Setup*  
Door Unlock Mode  
Smart Entry Light Flash  
Smart Entry Beep  
Remote Start System ON/OFF  
Lighting Setup  
Headlight Auto OFF Timer  
Interior Light Dimming Time  
Auto Light Sensitivity*  
Auto Interior Illumination Sensitivity  
Auto Headlight On with Wiper On  
Door/Window  
Setup  
Auto Door Lock  
Key and Remote Unlock Mode  
Keyless Lock Answer Back  
Security Relock Timer  
Auto Door Unlock  
Walk Away Auto Lock*  
Maintenance Info.  
Select Reset Items  
* Not available on all models  
356  
uuCustomized Featuresu  
Camera  
Rear Camera  
Fixed Guideline  
Dynamic Guideline  
Cross Traffic  
Monitor*  
* Not available on all models  
Continued  
357  
uuCustomized Featuresu  
List of customizable options  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
Automatic  
Date &  
Time  
Selects ON to have the GPS automatically adjust  
the clock. Select OFF to cancel this function.  
ON*1/OFF  
Set  
Date &  
Time  
Adjusts date.  
Set Date  
Set Time  
2 Adjusting the Clock P. 166  
Adjusts clock.  
2 Adjusting the Clock P. 166  
Sets the navigation system to automatically adjust  
the clock when driving through different time  
zones.  
Automatic  
Time Zone*  
ON*1/OFF  
Time  
Zone  
System  
Day & Time  
(Select time  
zone)  
Changes the time zone manually.  
Select ON to have the GPS automatically adjust the  
clock to daylight savings time. Select OFF to cancel  
this function.  
Auto Daylight Saving  
Time  
ON*1/OFF  
MM/DD/YYYY*1/  
DD/MM/YYYY/  
YYYY/MM/DD  
Date Format  
Time Format  
Sets the date format.  
Selects the digital clock display from 12H to 24H.  
12H*1/24H  
*1:Default Setting  
* Not available on all models  
358  
 
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
English (United  
States)*1/Español/  
Français  
Language  
Changes the display language.  
Touch Panel  
Sensitivity  
Sets the sensitivity of the touch panel screen.  
Changes the system sounds volume.  
Turns the verbal reminders on and off.  
High/Normal*1  
System Volumes  
System  
Volumes  
System  
Reading/ Verbal  
ON*1/OFF  
Warning  
Reminder  
Config. of  
Instrument  
Panel  
Selects whether the apps display comes on or not  
on the driver information interface.  
Config.1*1/Config.2/  
Config.3  
Select configuration  
Password  
Set the value of password display.  
ON*1/OFF  
ON/OFF*1  
Security  
Unknown sources  
*1:Default Setting  
Continued  
359  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Caption  
Description  
Selectable Settings  
Turns the subtitles on and off.  
ON/OFF*1  
Default*1/English  
(United States)/  
Español/Français  
Language Change the subtitle language.  
Very small/Small/  
Normal*1/Large  
Text Size  
Change the subtitle Text Size.  
Caption  
Use app defaults*1/  
White on black/  
Black on white/  
Yellow on black/  
Yellow on blue/  
Custom  
System  
Accessibility  
Caption  
style  
Change the subtitle Caption style.  
Current  
TTS  
engine  
TtsService  
Text-to-  
speech  
output  
TtsService  
*1:Default Setting  
360  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
Turns the refuel recommend function on and off.  
Refuel  
ON*1/OFF  
recommend*  
Status  
About  
Displays the Android setting items.  
Legal Information  
Factory Data  
Reset  
Resets all the settings to their factory default.  
System  
Continue/Cancel  
Displays the Android system memory and apps  
information.  
App Manager  
Detail  
Information  
Recent Location  
Requests Apps  
Displays the recent location requests from apps.  
*1:Default Setting  
* Not available on all models  
Continued  
361  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
+ Connect New  
Device  
Pairs a new phone to Apple CarPlay.  
Apple CarPlay  
Android Auto  
Wi-Fi  
Connects, disconnects, or deletes a paired phone.  
Smartph-  
one  
(Saved Devices)  
Connect-  
+ Connect New  
Device  
Pairs a new phone to Android Auto.  
ion*2  
Connects, disconnects, or deletes a paired phone.  
(Saved Devices)  
Network*1/Hotspot/  
Change Mode  
Changes the Wi-Fi mode.  
OFF  
(Available Networks/  
Connected Devices)  
Displays the available network(s) or current  
connected device(s).  
+ Connect New  
Device  
Pairs a new phone to HFL.  
Connec-  
tions  
Bluetooth  
Connects, disconnects, or deletes a paired phone.  
(Saved Devices)  
Apple CarPlay  
Android Auto  
Sets up the Apple CarPlay connection.  
Sets up the Android Auto connection.  
Smartphone  
Connection*3  
*1:Default Setting  
*2:Models with wireless Apple CarPlay and wireless Android Auto  
*3:Models without wireless Apple CarPlay and wireless Android Auto  
362  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Day Mode  
Description  
Selectable Settings  
Adjusts the settings of the audio/information  
screen.  
Display  
Night Mode  
Treble  
Midrange  
Bass  
Bass / Treble  
Adjusts the settings of the audio speakers’ sound.  
Sound  
Subwoofer*  
Balance / Fader  
DTS Neural Surround*  
Speed Volume Compensation  
Cancels/Calibrates the tire pressure monitoring  
system (TPMS).  
TPMS Calibration  
Blind Spot Info*  
Calibrate/Cancel  
Audible And Visual  
Changes the setting for the blind spot information.  
Turns the head-up warning on and off.  
Alert*1/Visual Alert  
Vehicle  
Driver Assist  
System Setup  
Head-up Warning*  
ON*1/OFF  
Select On/Off to indicate small displaying traffic  
sign icon on the driver information interface and  
the head-up display*.  
Traffic Sign  
Recognition System  
Small Icons ON*1/  
Small Icons OFF  
*1:Default Setting  
* Not available on all models  
Continued  
363  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
Forward Collision  
Warning Distance  
Changes Collision Mitigation Braking SystemTM  
(CMBSTM) alert distance.  
Normal*1/Short/  
Long  
Causes the system to beep when the system  
detects a vehicle, or when the vehicle goes out of  
the ACC with Low Speed Follow range.  
ACC Forward Vehicle  
Detect Beep  
ON/OFF*1  
ON/OFF*1  
Lane Keeping Assist  
Suspend Beep  
Causes the system to beep when Lane Keeping  
Assist System (LKAS) is suspended.  
Driver Assist  
System Setup  
Normal*1/Wide/  
Warning Only/  
Narrow  
Road Departure  
Mitigation Setting  
Changes the setting for the road departure  
mitigation system.  
OFF/Tactile Alert/  
Tactile And Audible  
Alert*1  
Driver Attention  
Monitor  
Changes the setting for the driver attention  
monitor.  
Vehicle  
English*1/Français/  
Español  
Language Selection  
Changes the display language.  
-5°F ~ 0°F*1 ~ +5°F  
(U.S.)  
Adjust Outside  
Temp. Display  
Adjusts the temperature reading by a few degrees.  
Turns the Rear Seat Reminder feature on and off.  
-3°C ~ 0°C*1 ~ +3°C  
(Canada)  
Meter Setup  
Rear Seat Reminder*  
Adjust Alarm Volume  
ON*1/OFF  
Changes the alarm volume, such as the buzzers,  
warnings, turn signal sound, and so on.  
High/Mid*1/Low  
*1:Default Setting  
* Not available on all models  
364  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Reverse Alert Tone*  
Description  
Selectable Settings  
Turns the reverse alert tone on and off.  
ON*1/OFF  
Config. of  
Instrument Panel  
Selects whether the apps display comes on or not  
on the driver information interface.  
Config.1*1/Config.2/  
Config.3  
Fuel Efficiency  
Backlight  
Turns the ambient meter feature on and off.  
ON*1/OFF  
When Fully  
Changes the setting of how to reset trip meter A  
and average fuel economy A.  
“Trip A” Reset Timing  
“Trip B” Reset Timing  
Refueled/Manually  
Reset*1/IGN OFF  
When Fully  
Changes the setting of how to reset trip meter B  
and average fuel economy B.  
Refueled/Manually  
Vehicle  
Meter Setup  
Reset*1/IGN OFF  
Auto Engine Idle  
Stop Guidance  
Screens*  
Selects whether the Auto Idle Stop display comes  
on or not.  
ON*1/OFF  
ON/OFF*1  
Selects whether the tachometer come on the driver  
information interface.  
Tachometer  
km/h · km/mph ·  
miles*1 (U.S.)  
Speed/Distance Units Selects the trip computer units.  
km/h · km*1/mph ·  
miles (Canada)  
*1:Default Setting  
* Not available on all models  
Continued  
365  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
ON*1/OFF  
Selects whether the turn-by-turn display comes on  
during the route guidance.  
Turn By Turn Auto  
Display  
Meter Setup  
Memory Position  
Link  
Turns the driving position memory system on and  
off.  
ON*1/OFF  
Driving  
Position  
Setup*  
Seat Position  
Movement at Entry/  
Exit  
Moves the seat rearward when you get in/get out  
of the vehicle. Changes the setting for this feature.  
ON*1/OFF  
Vehicle  
Changes which doors unlock when you grab the  
driver’s door handle.  
Driver Door Only*1/  
All Doors  
Door Unlock Mode  
Smart Entry Light  
Flash  
Causes some exterior lights to flash when you  
unlock/lock the doors.  
ON*1/OFF  
ON*1/OFF  
ON*1/OFF  
Keyless Access  
Setup*  
Causes the beeper to sound when you unlock/lock  
the doors.  
Smart Entry Beep  
Remote Start System  
ON/OFF  
Turns the remote engine start feature on and off.  
*1:Default Setting  
* Not available on all models  
366  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Headlight Auto OFF  
Description  
Selectable Settings  
Changes the length of time the exterior lights stay  
on after you close the driver’s door.  
0 sec/15 sec*1/30 sec/  
60 sec  
Timer  
Interior Light  
Dimming Time  
Changes the length of time the interior lights stay  
on after you close the doors.  
15 sec/30 sec*1/60  
sec  
Auto Light  
Sensitivity*  
Min/Low/Mid*1/  
High/Max  
Changes the timing for the headlights to come on.  
Lighting  
Setup  
Vehicle  
Auto Interior  
Illumination  
Sensitivity  
Changes the sensitivity of the brightness of the  
instrument panel when the headlight switch is in  
AUTO.  
Min/Low/Mid*1/  
High/Max  
Used to automatically come on the headlights  
when the wipers are used several times within a  
certain number of intervals with the headlight  
switch is in AUTO.  
Auto Headlight On  
with Wiper On  
ON*1/OFF  
*1:Default Setting  
* Not available on all models  
Continued  
367  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
Changes the setting for the automatic locking  
feature.  
OFF/With Vehicle  
Auto Door Lock  
Speed*1/Shift From P  
Sets up either the driver’s door or all doors to  
unlock on the first push of the keyless remote or  
built-in key.  
Key and Remote  
Unlock Mode  
Driver Door Only*1/  
All Doors  
Keyless Lock Answer  
Back  
LOCK/UNLOCK- The exterior lights flash.  
LOCK (2nd push)- The beeper sounds.  
ON*1/OFF  
Changes the time it takes for the doors to relock  
Security Relock Timer and the security system to set after you unlock the  
Door/Window  
Setup  
30sec*1/60sec/90sec  
vehicle without opening any door.  
Vehicle  
OFF/All Doors When  
Driver’s Door  
Changes the setting for when the doors unlock  
automatically.  
Opens*1/All Doors  
When Shifted to  
Park/All Doors With  
IGN OFF  
Auto Door Unlock  
Walk Away Auto  
Lock*  
Changes the settings for the auto lock function  
when you walk away from the vehicle.  
ON/OFF*1  
Maintenance  
Info.  
Resets the engine oil life display when you have  
performed the maintenance service.  
Select Reset Items  
*1:Default Setting  
* Not available on all models  
368  
uuCustomized Featuresu  
Setup  
Group  
Customizable Features  
Description  
Selectable Settings  
Selects whether the guidelines come on the rear  
camera monitor.  
Fixed Guideline  
ON*1/OFF  
2 Multi-View Rear Camera P. 529  
Rear Camera  
Camera  
Selects whether the guidelines come on the rear  
camera monitor.  
Dynamic Guideline  
Cross Traffic Monitor*  
ON*1/OFF  
ON*1/OFF  
2 Multi-View Rear Camera P. 529  
Turns the cross traffic monitor on and off.  
*1:Default Setting  
* Not available on all models  
369  
uuCustomized FeaturesuDefaulting All the Settings  
Defaulting All the Settings  
Reset all the menu and customized settings as the factory defaults.  
When you transfer the vehicle to a third party, reset  
all settings to default and delete all personal data.  
Defaulting System Settings  
1. Press the  
button.  
If you perform Factory Data Reset, it will reset the  
2. Select Settings.  
preinstalled apps to their factory default.  
3. Select System.  
If you perform Factory Data Reset, you cannot use  
the HondaLink® because it goes offline.  
4. Select Factory Data Reset.  
u A confirmation message appears on the  
screen.  
5. Select Continue to reset the settings.  
6. Select Continue again to reset the settings.  
u The system will reboot.  
Defaulting Vehicle Settings  
1. Press the  
button.  
2. Select Settings.  
3. Select Vehicle.  
4. Select Default.  
5. Select Yes.  
370  
 
HomeLink® Universal Transceiver*  
The HomeLink® Universal Transceiver can be programmed to operate up to three  
remote controlled devices around your home, such as garage doors, lighting, or  
home security systems.  
Before programming HomeLink to operate a garage  
door opener, confirm that the opener has an external  
entrapment protection system, such as an “electronic  
eye,” or other safety and reverse stop features. If it  
does not, HomeLink may not be able to operate it.  
Important Safety Precautions  
Refer to the safety information that came with your garage door opener to test that  
the safety features are functioning properly. If you do not have the safety  
information, contact the manufacturer.  
NOTE:  
Some LED lightbulbs installed in the garage door  
opener can interfere with the training and consistent  
operation of your HomeLink device. Please consider  
use of Low RF interference bulbs in your garage door  
opener.  
Before programming HomeLink, make sure that people and objects are out of the  
way of the garage or gate to prevent potential injury or damage.  
When programming a garage door opener, park just outside the garage door’s path.  
* Not available on all models  
371  
 
uuHomeLink® Universal Transceiver*uTraining HomeLink  
Training HomeLink  
If it is necessary to erase a previously entered  
Indicator  
learned code:  
Press and hold the I and III HomeLink  
buttons for about 10 seconds, until the  
green indicator blinks. Release the buttons,  
and proceed to step 1.  
I HomeLink  
Button  
If you are training the second or third  
button, go directly to step 1.  
III HomeLink Button  
The instructions on the next page should work for most gate or garage openers, but  
may not work for all. For detailed instructions about your specific remote opener,  
372  
 
uuHomeLink® Universal Transceiver*uTraining HomeLink  
Programming a Button  
Reprogramming a Button  
1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the  
HomeLink® button you want to program.  
If you want to retrain a programmed button for a  
new device, you do not have to erase all button  
memory. You can replace the existing memory code  
using this procedure:  
2.  
Press and hold the desired HomeLink button. Is the HomeLink indicator (LED) slowly  
flashing orange?  
1. Press and hold the desired HomeLink button until  
the HomeLink indicator begins to slowly flash  
orange. This should take about 20 seconds.  
NO  
YES  
3a. Hold the button on the remote  
transmitter. Does HomeLink indicator  
(LED) change from slowly flashing  
orange to rapidly flashing green or  
continuously on green? The process  
should take less than 60 seconds.  
3b.  
Canadian Garage Door Opener  
A. Press and release the HomeLink  
button. Press, hold and release the  
button on the remote every 2 secs.  
Does the HomeLink indicator (LED)  
change from slowly flashing orange to  
rapidly flashing or continuously on  
green? The process should take less  
than 60 seconds.  
2. Release the HomeLink button and position the  
remote transmitter you wish to link 1 - 3 inches  
(3 - 8 cm) from the HomeLink button you want to  
program, then follow steps 3 - 6 under  
“programming a button.”  
Erasing Button Memory  
4. Press and hold the programmed HomeLink  
button for about a second. Does the device  
(garage door opener) work?  
To erase programming from the buttons, press and hold  
the two outside HomeLink buttons until the HomeLink  
indicator changes from orange to rapidly flashing green  
.
This should take about 10 seconds. You should erase all  
programming before selling the vehicle.  
YES  
NO  
5.  
Press and hold the HomeLink button again.  
Operating  
Training  
Complete  
To operate, simply press and release the programmed  
HomeLink button. Activation will now occur for the  
trained device.  
HomeLink LED is  
continuously on green.  
HomeLink indicator rapidly flashes  
green.  
Questions  
6. Press and hold the HomeLink button  
5a. The remote has a rolling code. Press the  
“learn” button on the remote-controlled  
device (e.g. garage door opener).  
again.  
The remote-controlled device should  
operate.  
5b. Within 30 secs, press and hold the  
programmed HomeLink button for 2  
secs.  
Training Complete  
HomeLink® is a registered trademark of Gentex  
Corporation.  
373  
Bluetooth® HandsFreeLink®  
Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using  
your vehicle’s audio system, without handling your cell phone.  
Place your phone where you can get good reception.  
To use HFL, you need a Bluetooth-compatible cell  
phone. For a list of compatible phones, pairing  
procedures, and special feature capabilities:  
or call 1-888-528-7876.  
Using HFL  
HFL Buttons  
Canada: For more information on smartphone  
compatibility, call 1-855-490-7351.  
VOL(+/VOL(- (Volume) Buttons  
(home) Button  
Left Selector Wheel  
To use the system, the Bluetooth setting must be  
ON.  
Voice control tips  
Aim the vents away from the ceiling and close the  
windows, as noise coming from them may interfere  
with the microphones.  
Press the  
button when you want to call a  
number using a phonebook name or a number.  
Speak clearly and naturally after a beep.  
If the microphones pick up voices other than yours,  
the command may be misinterpreted.  
To change the volume level, select the audio  
system’s VOL (Volume) or use the remote audio  
controls on the steering wheel.  
(Back) Button  
(Talk) Button  
(Hang-up) Button  
(Pick-up) Button  
If there is no Favorite Contact entry in the system, the  
pop-up notification appears on the screen.  
374  
 
uuBluetooth® HandsFreeLink®uUsing HFL  
(Pick-up) button: Press to go directly to the phone menu on the driver  
information interface, or to answer an incoming call.  
(Hang-up) button: Press to end a call.  
Bluetooth® Wireless Technology  
The Bluetooth® word mark and logos are registered  
trademarks owned by Bluetooth SIG, Inc., and any  
use of such marks by Honda Motor Co., Ltd., is under  
license. Other trademarks and trade names are those  
of their respective owners.  
(Back) button: Press to go back to the previous screen, or cancel a command.  
(Talk) button: Press to access Voice Portal.  
Left Selector Wheel: Press the  
(home) button, then roll up or down to select.  
Phone on the driver information interface, and then press the left selector wheel.  
(home) button: Press to go back to the home screen of the driver information  
interface.  
HFL Limitations  
An incoming call on HFL will interrupt the audio  
system when it is playing. It will resume when the call  
is ended.  
To go to the phone screen of the driver information interface:  
1. Press the  
(home) button on the steering wheel.  
2. Roll up or down the left selector wheel to select Phone, then push the left  
selector wheel.  
u You can select Favorite Contacts or Recent Calls.  
Continued  
375  
uuBluetooth® HandsFreeLink®uUsing HFL  
HFL Status Display  
The information that appears on the audio/  
information screen varies between phone models.  
The audio/information screen notifies you when there is an incoming call.  
Bluetooth Indicator  
Appears when your phone is  
connected to HFL.  
Signal Strength  
Battery Level Status  
HFL Mode  
Caller’s Name  
(If registered)/  
Caller’s Number  
(If not registered)  
Limitations for Manual Operation*  
Certain manual functions are disabled or inoperable while the vehicle is in motion.  
You cannot select a grayed-out option until the vehicle is stopped.  
Only previously stored phonebook names or numbers can be called using voice  
commands while the vehicle is in motion.  
* Not available on all models  
376  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
HFL Menus  
The power mode must be in ACCESSORY or ON to use the system.  
To use HFL, you must first pair your Bluetooth-  
compatible cell phone to the system while the vehicle  
is parked.  
Phone settings screen  
1. Press the  
button.  
2. Select Phone.  
3. Select Settings.  
Some functions are limited while driving.  
Change Devices  
Auto Sync Phone  
+ Connect New Device  
(Existing entry list)  
Pair a new phone to the system.  
Connect, disconnect, or delete a paired device.  
Set phonebook and call history data to be automatically imported when a phone is paired to HFL.  
Auto Phone Call Transfer Set calls to automatically transfer from your phone to HFL when you enter the vehicle.  
Ringtone  
Select the ringtone.  
HondaLink Assist*  
Turn HondaLink® Assist on and off.  
* Not available on all models  
Continued  
377  
   
uuBluetooth® HandsFreeLink®uHFL Menus  
Phone menu screen  
1. Press the  
button.  
2. Select Phone.  
Recent Calls  
All  
Display the last outgoing, incoming and missed calls.  
Dialed  
Missed  
Received  
Display the last outgoing calls.  
Display the last missed calls.  
Display the last incoming calls.  
Favorite Contacts  
Contacts  
(Existing entry list)  
Dial the selected number in the speed dial list.  
Display the phonebook of the paired phone.  
Enter a phone number to dial.  
Keypad  
378  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Phone Setup  
Bluetooth® setup  
You can turn Bluetooth® function on and off.  
1. Press the  
button.  
2. Select Settings.  
3. Select Connections.  
4. Select Bluetooth.  
5. Select Options.  
6. Select Bluetooth, then ON.  
Continued  
379  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
To pair a cell phone (when there is no  
phone paired to the system)  
Your Bluetooth-compatible phone must be paired to  
the system before you can make and receive hands-  
free calls.  
1. Press the  
button.  
2. Select Phone.  
3. Select Connect Phone.  
4. Make sure your phone is in search or  
discoverable mode, then select + Connect  
New Device.  
u HFL automatically searches for a  
Bluetooth® device.  
Phone Pairing Tips:  
You cannot pair your phone while the vehicle is  
moving.  
Up to six phones can be paired.  
Your phone’s battery may drain faster when it is  
paired to the system.  
5. Select your phone when it appears on the  
list.  
u If your phone still does not appear,  
search for Bluetooth® devices using your  
phone.  
From your phone, search for HandsFree  
Link.  
6. The system gives you a pairing code on the  
audio/information screen.  
Once you have paired a phone, you can see it  
displayed on the screen with one or more icons on  
the right side.  
These icons indicate the following:  
: The phone is compatible with Bluetooth® Audio.  
: The phone can be used with HFL.  
*: The phone is compatible with Apple CarPlay.  
*: The phone is compatible with Android Auto.  
u Confirm if the pairing code on the screen  
and your phone match.  
If there is an active connection to Apple CarPlay or  
Android Auto, pairing of additional Bluetooth  
compatible devices is unavailable.  
This may vary by phone.  
7. Select desired functions and then select  
Connect.  
* Not available on all models  
380  
uuBluetooth® HandsFreeLink®uHFL Menus  
To change the currently paired phone  
1. Go to the phone settings screen.  
If no other phones are found or paired when trying to  
switch to another phone, HFL will inform you that the  
original phone is connected again.  
2. Select Change Devices.  
3. Select a phone to connect.  
u HFL disconnects the connected phone  
and starts searching for another paired  
To pair other phones, select + Connect New Device  
from the Bluetooth screen.  
phone.  
*
4. Select  
u
,
,
* or  
.
and  
can be selected  
simultaneously, however, when * or  
* is selected,  
selected.  
5. Select Apply.  
and  
cannot be  
* Not available on all models  
Continued  
381  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
To delete a paired phone  
1. Go to the phone settings screen.  
2. Select Change Devices.  
3. Select a phone you want to delete.  
4. Select Delete.  
5. A confirmation message appears on the  
screen. Select Yes.  
382  
uuBluetooth® HandsFreeLink®uHFL Menus  
Ringtone  
Vehicle: The fixed ringtone sounds from the  
speakers.  
You can change the ringtone setting.  
1. Go to the phone settings screen.  
2. Select Ringtone.  
Phone: Depending on the make and model of the  
mobile phone, the ringtone stored in the phone will  
sound if the phone is connected.  
3. Select Vehicle or Phone.  
Automatic Transferring  
If you get into the vehicle while you are on the phone, the call can be automatically  
transferred to HFL.  
1. Go to the phone settings screen.  
2. Select Auto Phone Call Transfer.  
3. Select ON or OFF.  
Continued  
383  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Automatic Import of Cellular Phonebook and Call History  
On some phones, you will be asked to allow your  
cellular phonebook to be imported.  
When Automatic Phone Sync is set to  
On:  
When your phone is paired, the contents of its  
phonebook and call history are automatically  
imported to the system.  
When you select a name from the list in the cellular  
phonebook, you can see a category icon. The icons  
indicate what types of numbers are stored for that  
name.  
Mobile  
Work  
Other  
Home  
Pager  
Car  
Changing the Automatic Phone Sync  
setting  
Fax  
1. Go to the phone settings screen.  
2. Select Auto Sync Phone.  
3. Select ON or OFF.  
Voice  
Pref  
On some phones, it may not be possible to import the  
category icons to the system.  
The phonebook is updated after every connection.  
Call history is updated after every connection or call.  
384  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Favorite Contacts  
To store a number as a favorite contact:  
1. Go to the phone menu screen.  
Recent Calls Screen  
2. Select the Recent Calls, Contacts, or  
Keypad screen.  
3. Select the star icon.  
u A notification appears on the screen if  
the favorite contact is successfully stored.  
u To remove the favorite contact, select  
the star icon again.  
Star Icon  
Contacts Screen  
Star Icon  
Keypad Screen  
Star Icon  
Continued  
385  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
To edit a favorite contact  
1. Go to the phone menu screen.  
2. Select Favorite Contacts.  
3. Select Edit on the favorite contact entry  
you want to edit.  
4. Select a setting you want.  
5. Select Save.  
To delete a favorite contact  
1. Go to the phone menu screen.  
2. Select Favorite Contacts.  
3. Select Edit on the favorite contact entry  
you want to delete.  
4. Select Remove.  
5. A confirmation message appears on the  
screen. Select Yes.  
386  
uuBluetooth® HandsFreeLink®uHFL Menus  
Making a Call  
Once a call is connected, you can hear the voice of  
the person you are calling through the audio  
speakers.  
You can make calls by inputting any phone  
number, or by using the imported  
phonebook, call history, or favorite contact  
entries.  
While there is an active connection with Apple  
CarPlay, phone calls cannot be made with  
HandsFreeLink® and are only made from Apple  
CarPlay.  
Continued  
387  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
To make a call using the imported  
phonebook  
1. Go to the phone menu screen.  
2. Select Contacts.  
3. Select a name.  
u You can sort by First Name or Last  
Name. Select the icon on the upper right  
of the screen.  
4. Select a number.  
u Dialing starts automatically.  
To make a call using a phone number  
1. Go to the phone menu screen.  
2. Select Keypad.  
3. Select a number.  
u Use the keyboard on the touch screen for  
entering numbers.  
4. Select Call.  
u Dialing starts automatically.  
388  
uuBluetooth® HandsFreeLink®uHFL Menus  
To make a call using the call history  
Call history is stored by All, Dialed, Missed,  
and Received.  
The call history appears only when a phone is  
connected to the system.  
1. Go to the phone menu screen.  
2. Select Recent Calls.  
u You can sort by All, Dialed, Missed, or  
Received. Select the icon on the upper  
right of the screen.  
3. Select a number.  
u Dialing starts automatically.  
To make a call using a favorite contact  
entry  
1. Go to the phone menu screen.  
2. Select Favorite Contacts.  
u You can change the order of favorite  
contact entries by selecting Reorder.  
3. Select a number.  
u Dialing starts automatically.  
Continued  
389  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Receiving a Call  
Call Waiting  
Press the  
When there is an incoming call, an audible  
notification sounds (if activated) and the  
Incoming Call... screen appears.  
button to put the current call on hold to  
answer the incoming call.  
Press the  
call.  
button again to return to the current  
Press the  
Press the  
call.  
button to answer the call.  
button to decline or end the  
Select Ignore to ignore the incoming call if you do  
not want to answer it.  
Press the  
button if you want to hang up the  
current call.  
You can select the icons on the audio/information  
screen instead of the  
and  
buttons.  
Options During a Call  
You can select the icons on the audio/information  
screen.  
The following options are available during a call.  
Mute: Mute your voice.  
Use Handheld: Transfer a call from the system to your phone.  
Keypad: Send numbers during a call. This is useful when you call a menu-driven  
phone system.  
The available options are shown on the lower  
half of the screen.  
Mute Icon  
Select the option.  
u The mute icon appears when Mute is  
selected. Select Mute again to turn it off.  
390  
   
uuBluetooth® HandsFreeLink®uHFL Menus  
To Set Up Text Message Options  
To use the text message function, it may be necessary  
to set up on your phone.  
To turn on or off the text message  
notice  
1. Press the  
2. Select Messages.  
3. Select Settings.  
4. Select Pop-up Notification.  
5. Select ON or OFF.  
button.  
ON: A pop-up notification comes on every time you  
receive a new message.  
OFF: The message you receive is stored in the system  
without notification.  
Continued  
391  
   
uuBluetooth® HandsFreeLink®uHFL Menus  
Receiving a Text Message  
Some mobile phones might not be able to read the  
transmission log of data sent and data received.  
HFL can display newly received text messages as well as the last 20 messages  
received on a linked cell phone. Each received message can be read aloud and  
replied to using a fixed common phrase.  
1. Select the system status icon.  
The system does not display any received messages  
while you are driving. You can only hear them read  
aloud.  
u The status area appears.  
2. A pop-up appears and notifies you of a new  
text message.  
3. Select Open to display the message.  
u The text message is displayed.  
The system can only receive messages that are sent as  
text (SMS) messages. The message sent using the  
data services will not be displayed in the list.  
4. Select Play to listen to the message. To  
discontinue the message read-out, select  
Stop.  
With some phones, you may be able to display up to  
20 of the last text messages received.  
State or local laws may limit your use of the HFL text  
message feature. Only use the text message feature  
when conditions allow you to do so safely.  
392  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Selecting a Phone  
You can only receive notifications from one phone at  
a time.  
You can select one from the Bluetooth® device list to be active and receive  
notifications.  
1. Press the  
button.  
2. Select Messages.  
3. Select Settings.  
4. Select Change Connected Phone.  
5. Change a desired phone.  
Continued  
393  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Displaying Messages  
The  
(blue) icon appears next to an unread  
1. Press the  
2. Select Messages.  
button.  
Message List  
message.  
u Select a phone if necessary.  
3. Select a message.  
u The text message is displayed.  
If you delete a message on the phone, the message  
will also be deleted from the system. If you send a  
message from the system, the message goes to your  
phone’s outbox.  
To see the previous or next message, select  
or Next on the message screen.  
Prev.  
Text Message  
394  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Read or Stop reading a message  
1. Go to the text message screen.  
2. Select Play.  
u The system starts reading the message  
aloud.  
3. Select Stop to stop reading.  
Select Play again to start reading the  
message.  
The available reply messages are as follows:  
Talk to you later, I’m driving.  
I’m on my way.  
I’m running late.  
OK  
Yes  
No  
Reply to a message  
1. Go to the text message screen.  
2. Select Reply.  
3. Select the reply message.  
u The pop-up menu appears on the screen.  
4. Select Send to send the message.  
u Message sent appears on the screen  
when the reply message was successfully  
sent.  
The default reply messages are displayed only in  
English. If you want to use reply messages in  
languages other than English, please edit them.  
You can add a reply message by selecting + Create  
New Message.  
Only certain phones receive and send messages when  
paired and connected. For a list of compatible  
phones:  
or call 1-888-528-7876.  
Canada: For more information on smartphone  
compatibility, call 1-855-490-7351.  
Continued  
395  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
To edit a reply message  
1. Press the button.  
You can change the order of reply messages by  
2. Select Messages.  
selecting Reorder.  
3. Select Settings.  
4. Select Edit Replies.  
5. Select the reply message you want to edit  
or + Create New Message.  
u The on-screen keyboard screen is  
displayed.  
6. Enter a reply message, and then select  
Save.  
To delete a reply message  
1. Press the  
button.  
2. Select Messages.  
3. Select Settings.  
4. Select Delete Replies.  
5. Select  
on the reply message you want to  
delete.  
u The pop-up menu appears on the screen.  
6. Select Yes.  
396  
 
uuBluetooth® HandsFreeLink®uHFL Menus  
Making a call to a sender  
1. Go to the text message screen.  
2. Select Call.  
397  
uuBluetooth® HandsFreeLink®uHondaLink® Assist*  
HondaLink® Assist*  
HondaLink® Assist also provides services you can  
operate from the Internet or your smartphone.  
In Case of Emergency  
Automatic collision notification  
If your vehicle’s airbags deploy or if the unit  
detects that the vehicle is severely impacted,  
your vehicle automatically will attempt to  
connect to the HondaLink® operator. If  
connected, information about your vehicle, its  
location, and its condition can be sent to the  
operator*1; you also can speak to the operator  
when connected.  
To subscribe to HondaLink® Assist, or to get more  
information about all of its features, contact a Honda  
dealer, or visit hondalink.honda.com  
Your vehicle may not be able to connect to the  
operator if the battery level is low, the line is  
disconnected, or you do not have adequate cellular  
coverage.  
IMPORTANT: For vehicles equipped with HondaLink® Assist, owner activation  
constitutes authorization for Honda to collect information from your vehicle needed  
to provide the service, and agreement to the Terms of Use at www.hondalink.com/  
TermsAndConditions. In a crash, HondaLink® Assist will attempt to notify emergency  
services but NEITHER HONDA NOR ITS SERVICE PROVIDERS GUARANTEE THAT  
SUCH NOTIFICATION WILL OCCUR.  
You cannot use this emergency services when:  
You travel outside the HondaLink® service coverage  
areas.  
There is a problem with the connecting devices,  
such as the microphones, speakers, or the unit  
itself.  
HondaLink Assist is not enabled.  
Honda reserves the right to terminate HondaLink® Assist services at any time or for  
any reason, and in the future may not be able to provide services due to changes in,  
or obsolescence of, technology integral to the service or changes in governmental  
regulation.  
You cannot operate other phone-related functions  
using the screen while talking to the operator.  
Only the operator can terminate the connection to  
your vehicle.  
*1: Depending on your phone and adequate cellular coverage, your vehicle’s location may not  
be sent to the operator.  
If the unit fails to connect to the operator, it  
repeatedly tries until it succeeds.  
* Not available on all models  
398  
     
uuBluetooth® HandsFreeLink®uHondaLink® Assist*  
To enable notification  
1. Go to the phone settings screen.  
Setting options:  
Yes: Notification is available.  
No: Disable the feature.  
2. Select HondaLink Assist.  
3. Select Yes or No.  
399  
 
Refuel Recommend  
Models with navigation system  
Your vehicle is equipped with a feature that automatically calculates when to refuel.  
This feature will notify you when refueling is recommended as well as enable you to  
search for gas stations that are located in the vicinity of your vehicle.  
1. When it is time to refuel the vehicle, a  
You can turn the Refuel recommend function on  
and off.  
When you turn off this feature, the refuel  
recommend notification will not display.  
notification is displayed and a notification  
icon is displayed in the header.  
2. Touch the box that contains the icon.  
This feature can only be used when the gas tank fuel  
level is below 30 percent.  
If you select Find Gas Station Now or put more  
than 5 liters of gasoline into the gas tank, the  
notification for refueling will disappear. If you prefer  
not to be notified, select OFF in the settings for  
Refuel recommend.  
Notification  
icon  
3. Select Find Gas Station Now.  
When you drive on a rough road or ascend or  
descend a hill for an extended period of time, the  
notification may disappear or may not be displayed at  
all.  
4. Choose a gas station from the search  
screen of the navigation system.  
u For instructions on how to use the  
navigation system, refer to the  
navigation system manual.  
400