Get Maintenance -> Maintenance Under the Hood Guide for Honda Accord 4 Door 2023

Replacing Light Bulbs

Headlight Bulbs

When replacing, use the following bulbs.

1Headlight Bulbs

High beam headlight: LED^*

High beam headlight: 60 W (HB3 for halogen bulb type)^*

Low beam headlight: LED

Models with halogen high beam headlights

NOTICE

Halogen bulbs get very hot when lit.

Oil, perspiration, or a scratch on the glass can cause

the bulb to overheat and shatter.

All models

The headlight aim is set by the factory, and does not

need to be adjusted. However, if you regularly carry

heavy items in the trunk or tow a trailer^*, have the

aiming readjusted at a dealer or by a qualified

technician.

Models with halogen high beam headlights

When replacing a halogen bulb, handle it by its base,

and protect the glass from contact with your skin or

hard objects. If you touch the glass, clean it with

denatured alcohol and a clean cloth.

* Not available on all models

564

uuReplacing Light BulbsuHeadlight Bulbs

1High Beam Headlights

High Beam Headlights

Models with halogen high beam headlights

■

Models with LED high beam headlights

High beam headlights are LED type. Have an

authorized Honda dealer inspect and replace the light

assembly.

Passenger side

Holding clip

1. Remove the hose and the holding clip using

a flat-tip screwdriver, then remove the

upper part of the window washer reserve

tank.

When removing the clip, insert a flat-tip screwdriver,

then lift and remove the clip.

u Check the amount of window washer

fluid is below the upper part of the

window washer reserve tank and remove

it.

Hose

Both sides

Coupler

Tab

2. Push the tab to remove the coupler.

3. Rotate the old bulb counter-clockwise to

remove.

4. Insert a new bulb into the headlight

assembly and turn it clockwise.

5. Insert the coupler into the connector of the

bulb.

Insert the clip with the pin raised, and push until it is

flat.

Bulb

Push until the pin

is flat.

Low Beam Headlights

■

Low beam headlights are LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

565

uuReplacing Light BulbsuFog Lights^*

Fog Lights^*

Fog lights are LED type. Have an authorized Honda dealer inspect and replace the

light assembly.

Parking/Daytime Running Lights

Parking/daytime running lights are LED type. Have an authorized Honda dealer

inspect and replace the light assembly.

Front Turn Signal Lights

Front turn signal lights are LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

Front Side Marker Lights

Front side marker lights are LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

Side Turn Signal/Emergency Indicator Lights^*

Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect

and replace the light assembly.

* Not available on all models

566

uuReplacing Light BulbsuBrake Lights, Taillights, Rear Side Marker Lights and Rear Turn Signal Light Bulbs

Brake Lights, Taillights, Rear Side Marker Lights and

Rear Turn Signal Light Bulbs

When replacing, use the following bulbs.

1Brake Lights, Taillights, Rear Side Marker Lights and Rear Turn

Signal Light Bulbs

Brake and rear side marker/taillights are LED type.

Have an authorized Honda dealer inspect and replace

the light assembly.

Brake Light: LED

Taillight: LED

Rear Side Marker Light: LED

Rear Turn Signal Light: 21 W (Amber)

1. Pry on the edge of the cover using a flat-tip

screwdriver to remove the cover.

u Wrap the flat-tip screwdriver with a cloth

to prevent scratches.

2. Remove the bolts.

3. Pull the light assembly out of the rear pillar.

Cover

Bolts

Continued

567

uuReplacing Light BulbsuBrake Lights, Taillights, Rear Side Marker Lights and Rear Turn Signal Light Bulbs

4. Turn the socket counter-clockwise and

remove it.

5. Push and turn the old bulb clockwise and

remove it, and insert a new bulb.

Bulb

Socket

568

uuReplacing Light BulbsuTaillight, Brake Light^*and Back-Up Light Bulbs

Taillight, Brake Light^*and Back-Up Light Bulbs

1Taillight, Brake Light^*and Back-Up Light Bulbs

When replacing, use the following bulbs.

Taillights and brake lights^*are LED type. Have an

authorized Honda dealer inspect and replace the light

assembly.

Taillight: LED

Brake Light^*: LED

Back-Up Light: 16 W

When removing the clip, insert a flat-tip screwdriver,

then lift and remove the clip.

1. Remove the holding clips using a flat-tip

screwdriver, then pull the lining back.

Holding Clip

Clip

Driver side

Insert the clip with the pin raised, and push until it is flat.

2. Turn the socket counter-clockwise and

remove it.

3. Remove the old bulb and insert a new bulb.

Push until the

pin is flat.

Bulb

Socket

* Not available on all models

Continued

569

uuReplacing Light BulbsuTaillight, Brake Light^*and Back-Up Light Bulbs

Passenger side

2. Turn the socket clockwise and remove it.

3. Remove the old bulb and insert a new bulb.

Bulb

Socket

570

uuReplacing Light BulbsuRear License Plate Light

Rear License Plate Light

Rear license plate light is LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

High-Mount Brake Light

High-mount brake light is LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

571

Maintenance -> Maintenance Under the Hood for Your Honda Accord 4 Door 2023

Popular Manuals