Handling the Unexpected -> Engine Does Not Start for Your Honda Civic 4 Door 2017-2023

Engine Does Not Start  
1Checking the Engine  
Checking the Engine  
If the engine does not start, check the starter.  
If you must start the vehicle immediately, use an  
assisting vehicle or booster battery to jump start it.  
2 Jump Starting P. 695  
Do not hold the ENGINE START/STOP button* for  
more than 15 seconds.  
Starter condition  
Checklist  
Models with keyless access system  
Check for a message on the driver information interface*.  
Starter doesn’t turn or turns  
over slowly.  
The battery may be dead. Check  
each of the items on the right and  
respond accordingly.  
If the To Start, Hold Remote Near Start Button message appear  
2 If the Keyless Remote Battery is Weak P. 693  
uMake sure the keyless remote is in its operating range  
2 ENGINE START/STOP Button Operating Range P. 198  
Check brightness of the interior lights.  
Turn on the interior lights and check the brightness.  
If the interior lights are dim or do not come on at all  
2 Battery P. 656  
If the interior lights come on normally 2 Fuses P. 710  
The starter turns over normally Review the engine start procedure.  
but the engine doesn’t start.  
There may be a problem with the  
fuse. Check each of the items on  
the right and respond accordingly.  
Follow its instructions, and try to start the engine again. 2 Starting the Engine P. 458, 461  
Check the immobilizer system indicator.  
When the immobilizer system indicator is blinking, the engine cannot be started.  
2 Immobilizer System P. 189  
Check the fuel level.  
There should be enough fuel in the tank. 2 Fuel Gauge P. 151  
Check the fuse.  
Check all fuses, or have your vehicle checked by a dealer.  
2 Inspecting and Changing Fuses P. 716  
If the problem continues:  
2 Emergency Towing P. 717  
* Not available on all models  
692  
 
uuEngine Does Not Start  
uIf the Keyless Remote Battery is Weak  
Model with keyless access system  
If the Keyless Remote Battery is Weak  
If the beeper sounds, the To Start, Hold Remote Near Start Button message  
appears on the driver information interface, and the ENGINE START/STOP button  
flashes, and the engine won't start, start the engine as follows.  
1. Touch the centre of the ENGINE START/  
STOP button with the H logo on the keyless  
remote while the ENGINE START/STOP  
button is flashing. The buttons on the  
keyless remote should be facing you.  
u The ENGINE START/STOP button  
flashes for about 30 seconds.  
2. Depress the brake pedal (Continuously  
variable transmission) or clutch pedal  
(manual transmission) and press the  
ENGINE START/STOP button within 10  
seconds after the beeper sounds and the  
ENGINE START/STOP button changes  
from flashing to on.  
u If you do not depress the pedal, the  
mode changes to ACCESSORY.  
693  
 
uuEngine Does Not Start  
uEmergency Engine Stop  
Model with keyless access system  
Emergency Engine Stop  
The ENGINE START/STOP button may be used to stop the engine due to an  
emergency situation even while driving. If you must stop the engine, do either of the  
following operations:  
1Emergency Engine Stop  
Do not press the button while driving unless it is  
absolutely necessary for the engine to be turned off.  
Press and hold the ENGINE START/STOP button for about three seconds.  
Firmly press the ENGINE START/STOP button twice.  
The steering wheel will not lock.  
Continuously variable transmission models  
The power mode is in ACCESSORY when the engine is stopped.  
To change the mode to VEHICLE OFF (LOCK), move the shift lever to (P after the  
vehicle comes to a complete stop. Then press the ENGINE START/STOP button  
twice without depressing the brake pedal.  
Manual transmission models  
The power mode changes to VEHICLE OFF (LOCK).  
694