Get Maintenance -> Checking and Maintaining Wiper Blades Guide for Honda Civic 4 Door 2017-2023

Checking and Maintaining Wiper Blades

Checking Wiper Blades

If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces

of the blade may scratch the window glass.

Changing the Wiper Blade Rubber

1. Turn the ignition switch to OFF (0^*1

1Changing the Wiper Blade Rubber

2. While holding the wiper switch in the

MIST position, turn the ignition switch to

NOTICE

Avoid dropping the wiper arm onto the windscreen,

it may damage the wiper arm and/or the windscreen.

ON (w^*1, then to LOCK (0^*1

u Both wiper arms are set to the

maintenance position as shown in the

image.

3. Lift both wiper arms.

*1: Models with the keyless access system have an ENGINE START/STOP button instead of an

ignition switch.

646

uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber

4. Press and hold the tab, then slide the

holder off the wiper arm.

Tab

5. Pull the end of the wiper blade in the

direction of the arrow in the image until it

is out of the holder’s end cap.

Blade

End cap at

the bottom

6. Pull the wiper blade in the opposite

direction to slide it out of the holder.

Blade

Holder

Continued

647

uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber

7. Insert the flat side of the new wiper blade

onto the bottom part of the holder. Insert

the blade all the way.

Blade

8. Install the end of the wiper blade into the

cap.

9. Slide the holder onto the wiper arm until it

locks.

Holder

10. Lower both wiper arms.

11. Turn the ignition switch to ON (w^*1and

hold the wiper switch in the MIST position

until both wiper arms return to the

standard position.

Cap

*1: Models with the keyless access system have an ENGINE START/STOP button instead of an

ignition switch.

648

Maintenance -> Checking and Maintaining Wiper Blades for Your Honda Civic 4 Door 2017-2023

Popular Manuals