Driver and Passenger -> Additional Information About Your Seat Belts for Your Honda CR-V SUV First Generation (1995-2000)

Table of Contents  
Main Menu  
Additional Information About Your Seat Belts  
Seat Belt System Components  
Lap/Shoulder Belt  
way and will not get closed in the  
door.  
Your seat belt system includes lap/  
shoulder belts in the front seats and  
the outer back seats, and a lap belt in  
the center back seat.  
All lap/shoulder belts have an  
emergency locking retractor.  
In normal driving, the retractor lets  
you move freely in your seat while it  
keeps some tension on the belt.  
During a collision or sudden stop,  
the retractor automatically locks the  
belt to help restrain your body.  
The seat belt system also  
includes a light on the  
instrument panel to remind you and  
your passengers to fasten your belts.  
If the driver's seat belt is not  
fastened before the ignition is turned  
ON (II), the light will come on and a  
beeper will also sound. The beeper  
will stop after a few seconds, but the  
light will stay on until the driver's  
seat belt is fastened.  
All the lap/shoulder belts except the  
driver's have an additional locking  
mechanism that must be activated to  
secure a child seat. (See pages  
30 and 34 for instructions on how to  
secure child seats with this type of  
seat belt.)  
This seat belt has a single belt that  
goes over your shoulder, across your  
chest and across your hips.  
To fasten the belt, insert the latch  
plate into the buckle, then tug on the  
belt to make sure the buckle is  
latched.  
To unlock the belt, push the red  
PRESS button on the buckle.  
Guide the belt across your body to  
the door pillar. After exiting the  
vehicle, be sure the belt is out of the  
If the shoulder part of the belt is  
pulled all the way out, the locking  
mechanism will activate. The belt  
will retract, but it will not allow the  
passenger to move freely.  
Driver and Passenger Safety  
Table of Contents  
Main Menu  
Additional InformationAbout Your Seat Belts  
To deactivate the locking  
Seat Belt Maintenance  
mechanism, unlatch the buckle and  
let the seat belt fully retract. To  
refasten the belt, pull it out only as  
far as needed.  
For safety, you should check the  
condition of your seat belts regularly.  
Pull each belt out fully and look for  
frays, cuts, burns, and wear. Check  
that the latches work smoothly and  
that the lap/shoulder belts retract  
easily. Any belt not in good condition  
or not working properly will not  
provide good protection and should  
be replaced as soon as possible.  
See page 15 for instructions on how  
to wear the lap/shoulder bell  
properly.  
Lap Belt  
The lap belt has one manually-  
adjusted belt that fits across the hips.  
To fasten the belt, insert the latch  
U.S. Models  
plate into the buckle marked  
CENTER, then tug on the belt to  
make sure the buckle is latched.  
Honda provides a lifetime warranty  
on seat belts. Honda will repair or  
replace any seat belt component that  
fails to function properly during  
normal use. Please see your Honda  
WarrantyInformationbookletfor  
details.  
To unlock the belt, push the red  
PRESS button.  
See page 16 for how to lengthen the  
lap belt, and how to properly position  
the belt.  
CONTINUED  
Driver and Passenger Safety