Instruments and Controls -> Indicator Lights for Your Honda CR-V SUV First Generation (1995-2000)

Main Menu  
Table of Contents  
Indicator Lights  
The instrument panel has many  
indicators to give you important  
information about your vehicle.  
HIGH BEAM INDICATOR  
TAILGATE-OPEN INDICATOR  
CHARGING SYSTEM  
INDICATOR  
SEAT BELT  
REMINDER LIGHT  
The U.S. instrument panel is  
shown. Differences for the Canadian  
models are noted in the text.  
*
LOW OIL  
PRESSURE  
INDICATOR  
LOW FUEL  
INDICATOR  
SUPPLEMENTAL  
RESTRAINT SYSTEM  
INDICATOR  
CRUISE CONTROL  
INDICATOR  
ANTI-LOCK BRAKE  
SYSTEM INDICATOR  
MALFUNCTION  
INDICATOR LAMP  
PARKING BRAKE AND BRAKE  
SYSTEM INDICATOR'  
Instruments and Controls  
Main Menu  
Table of Contents  
Indicator Lights  
U.S.  
Canada  
Low Oil Pressure  
Indicator  
The engine can be severely damaged  
if this light flashes or stays on when  
the engine is running. For complete  
information, see page 264 .  
Parking Brake and  
Brake System  
Indicator  
Supplemental Restraint  
System Indicator  
This indicator lights when you turn  
the ignition switch ON (II). If it  
comes on at any other time, it  
indicates a problem in the  
SRS  
BRAKE  
This light has two functions:  
1. It lights as a reminder that you  
have not released the parking  
brake. Driving with the parking  
brake applied can damage the  
brakes and tires, and cause the  
ABS to turn off (see page 167 ).  
supplemental restraint system. For  
complete information, see page 47 .  
Charging System  
Indicator  
If this light conies on when the  
engine is running, the battery is not  
being charged. For complete  
information, see page 265 .  
Seat Belt Reminder Light  
This indicator lights when you turn  
the ignition switch ON (II). It is a  
reminder to you and your passengers  
to protect yourselves by fastening  
the seat belts. A beeper also sounds  
if you have not fastened your seat  
belt.  
2. If it remains lit after you release  
the parking brake while the engine  
is running, or comes on while  
driving, it can indicate a problem  
in the brake system. For complete  
information, see page 267 .  
Malfunction Indicator  
Lamp  
See page 266.  
If you do not fasten your seat belt,  
the beeper will stop after a few  
seconds but the light stays on until  
you do. Both the light and the beeper  
stay off if you fasten your seat belt  
before turning on the ignition.  
Instruments and Controls  
Main Menu  
Table of Contents  
Indicator Lights  
U.S.  
Canada  
Anti-lock Brake  
System (ABS)  
Indicator  
High Beam Indicator  
ABS  
Turn Signal and Hazard Warning  
Indicators  
This light comes on with the high  
beam headlights. See page 60 for  
information on the headlight  
controls.  
Only on models equipped with ABS (see  
page 165)  
The left or right turn signal light  
blinks when you signal a lane change  
or turn. If the light does not blink or  
blinks rapidly, it usually means one  
of the turn signal bulbs is burned out  
(see page 233 ). Replace the bulb as  
soon as possible, since other drivers  
cannot see that you are signalling.  
This light normally comes on when  
you turn the ignition switch ON (II)  
and goes off after the engine starts.  
If it comes on at any other time,  
there is a problem in the ABS. If this  
happens, take the vehicle to your  
dealer to have it checked. With the  
light on, your vehicle still has normal  
braking ability but no anti-lock.  
On Canadian models, this indicator  
comes on with reduced brightness  
when the Daytime Running Lights  
(DRL) are on (see page 60).  
Cruise Control Indicator  
CRUISE  
CONTROL  
When you turn on the Hazard  
Warning switch, both turn signal  
lights blink. All turn signals on the  
outside of the vehicle should flash.  
This lights when you set the cruise  
control. See page 66 for information  
on operating the cruise control.  
Low Fuel Indicator  
This light comes on as a reminder  
that you must refuel soon.  
Tailgate-open Indicator  
This light comes on if the tailgate is  
not closed tightly.  
Instruments and Controls