Main Menu
Table of Contents
Mirrors, ParkingBrake
Adjusting the Power Mirrors
Parking Brake
PARKING BRAKE LEVER
SELECTOR SWITCH
ADJUSTMENT SWITCH
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake light on
the instrument panel should go out
when the parking brake is fully
released (see page 54 ).
Adjust the outside mirrors with the
adjustment switch on the left side of
the dashboard:
3. Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up or down.
1. Turn the ignition switch UN (II).
4. When you finish, move the
selector switch to the center (off)
position. This turns off the
2. Move the selector switch to L
(driver's side) or R (passenger's
side).
adjustment switch soyou can't
move a mirror out of position by
accidentally bumping the switch.
NOTICE
Drivingthevehiclewiththeparkeing
brake applied can damage the rear
brakes and axles.
Instruments and Controls