Get Instruments and Controls -> Seats Guide for Honda CR-V SUV First Generation (1995-2000)

Main Menu

Table of Contents

Keys and Locks, Seats

Glove Box

Front Seat Adjustments

See pages 12 — 14 for importantsafety

information and warnings about how to

properly position seats and seat-backs.

An open glove box can cause

serious injury to your passenger

in a crash, even if the

passenger is wearing the seat

belt.

Make all seat adjustments before

you start driving.

Always keep the glove box

closed while driving.

Open the glove box by pulling the

bottom of the handle. Close it with a

firm push. Lock or unlock the glove

box with the master key.

CONTINUED

Instruments and Controls

Main Menu

Table of Contents

Seats

Driver's Seat Height Adjustment

To change the angle of the seat-back,

pull up on the lever on the outside of

the seat bottom. Move the seat-back

to the desired position and release

the lever. Let the seal-back latch in

the new position.

To adjust the seat forward and

backward, pull up on the lever under

the seat cushion's front edge. Move

the seat to the desired position and

release the lever. Try to move the

seat to make sure it is locked in

position.

The height of your driver's seat is

adjustable. Turn the front dial on the

outside of the seat cushion to raise

the front of the seat bottom and turn

the rear dial to raise the rear.

Make all seat adjustments before

you start driving.

Instruments and Controls

Main Menu

Table of Contents

Seats

Head Restraints

See page 14 for important safety

information and a warning about how to

properlyposition the head restraints,

To remove a head restraint for

cleaning or repair, pull it up as far as

it will go. Push the release button

and pull the restraint out of the seat-

back.

The head restraints help protect you

and your passengers from whiplash

and other injuries. They are most

effective when you adjust them so

the back of the occupant's head rests

against the center of the restraint. A

taller person should adjust the

RELEASE BUTTON

restraint as high as possible.

The head restraints adjust for height.

You need both hands to adjust the

restraint. Do not attempt to adjust it

while driving. To raise it, pull upward.

To lower the restraint, push the

release button sideways and push

the restraint down.

Instruments and Controls

Main Menu

Table of Contents

Seats

Rear Seat-back Adjustment

Rear Seat Armrest

See pages 12 — 14 for important safely

information and warnings about how to

properly position seals and seat-backs.

The angle of the rear seat-backs can

be adjusted separately. To change

the angle of the seat-back, pull up on

the knob on the top of the seat-back.

Move the seat-back to the desired

position, then release the knob.

Make sure the seat-back latches in

the new position.

The rear seat armrest is located at

the center of the rear seat. Pivot it

down to use it.

Instruments and Controls

Main Menu

Table of Contents

Seats

Reclining the Front and Rear

Seat-backs

EX m odel

3. Pull up the lever on the side of the

rear seat. Lift the rear edge of the

seat bottom until the seat latches.

You can recline the seat-backs on the

front and rear seats to make a large

cushioned area. To do this:

2. Lift the slide lever and slide the

front seat forward as far as it will

go. Pull up the seat-back angle

adjustment lever, then pivot the

seat-back backward. Release the

lever when the seat-back is even

with the cushion on the rear seat.

1. Remove the front seat head

restraint and put it in the pocket of

the seat-back.

CONTINUED

Instruments and Controls

Main Menu

Table of Contents

Seats

Folding Rear Seat

The left and right halves of the rear

seat can be folded up separately to

create more cargo space.

Reverse this procedure to return the

seats to their upright positions.

Make sure you install the head

restraints, and that the seats are

locked securely in place before

driving.

4. Pull up on the knob on top of the

seat-back and pivot the rear seat-

back backward. Release the knob

when the seat-back is reclined as

far as it will go.

1. Store the latch plate for the center

lap belt by rolling up the belt and

pushing it into the seat pocket.

Instruments and Controls

Main Menu

Table of Contents

Seats

STRAP

2. Pull the strap to release the seat

bottom. Pivot the seat bottom

forward.

Put the head restraint behind the

seat bottom as shown.

Pass the fastening strap through the

hole of the head restraint and fasten

it with the velcro strap.

3. Remove the head restraint and

pull up on the knob on the top of

the seat-back. Pivot the seat-back

forward.

Reverse this procedure to return the

seat to the upright position. Make

sure that the seat is locked securely

before driving.

CONTINUED

Instruments and Controls

Instruments and Controls -> Seats for Your Honda CR-V SUV First Generation (1995-2000)

Related Topics

Instruments and Controls

Instruments and Controls