Driving -> Parking Tips for Your Honda CR-V SUV Second Generation (2001-2005)

Main Menu  
Table of Contents  
Parking  
Always use the parking brake when  
you park your vehicle. Make sure  
the parking brake is set firmly, or  
your vehicle may roll if it is parked  
on an incline.  
Parking Tips  
If the vehicle is facing uphill, turn  
the front wheels away from the  
curb. If you have a manual  
Make sure the moonroof (if  
equipped) and the windows are  
closed.  
transmission, put it in first gear.  
Turn off the lights.  
If the vehicle is facing downhill,  
turn the front wheels toward the  
curb. If you have a manual  
If your vehicle has an automatic  
transmission, set the parking brake  
before you put the transmission in  
Park. This keeps the vehicle from  
moving and putting pressure on the  
parking mechanism in the  
Place any packages, valuables, etc.  
in the cargo area or take them  
with you.  
transmission, put it in reverse gear.  
Make sure the parking brake is  
fully released before driving away.  
Driving with the parking brake  
partially set can overheat or  
damage the rear brakes.  
Lock the doors and the tailgate.  
Make sure the hatch glass is  
closed securely.  
transmission.  
Never park over dry leaves, tall  
grass, or other flammable  
materials. The hot three way  
catalytic converter could cause  
these materials to catch on fire.  
166  
Main Menu  
Table of Contents  
Braking System  
Your vehicle is equipped with disc  
brakes at all four wheels. A power  
assist helps reduce the effort needed  
on the brake pedal. The anti-lock  
brake system (ABS) helps you retain  
steering control when braking very  
hard.  
Check your brakes after driving  
through deep water. Apply the  
brakes moderately to see if they feel  
normal. If not, apply them gently and  
frequently until they do. Be extra  
cautious and alert in your driving.  
Brake Pad Wear Indicators  
The front and rear disc brakes on all  
models have audible brake wear  
indicators.  
If the brake pads need replacing, you  
will hear a distinctive, metallic  
Braking System Design  
The hydraulic system that operates  
the brakes has two separate circuits.  
screeching sound when you apply  
the brake pedal. If you do not have  
the brake pads replaced, they will  
screech all the time. It is normal for  
the brakes to occasionally squeal or  
squeak when you apply them.  
Resting your foot on the pedal keeps  
the brakes applied lightly, builds up  
heat, and reduces their effectiveness. Each circuit works diagonally across  
It also keeps your brake lights on all  
the time, confusing drivers behind  
you.  
the vehicle (the left-front brake is  
connected with the right-rear brake,  
etc.). If one circuit should develop a  
problem, you will still have braking  
at two wheels.  
Constant application of the brakes  
when going down a long hill builds  
up heat and reduces their effective-  
ness. Use the engine to assist the  
brakes by taking your foot off the  
accelerator and downshifting to a  
lower gear.  
167