09/07/16 18:46:31 31SWA630_356
Changing the Engine Oil and Filter
4. Install a new oil filter according to
8. Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
OIL FILTER
the instructions that come with it.
Make sure to clean off any dirt
and dust on the contacting surface
of a new oil filter.
9. Turn off the engine and let it sit
for several minutes, then check
the oil level on the dipstick. If
necessary, add more oil.
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten the drain bolt to:
29 lbf·ft (39 N·m , 4.0 kgf·m)
6. Refill the engine with the recom-
mended oil.
Improper disposal of engine oil can be
harmful to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.
3. Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your
dealer) is required.
Engine oil change capacity
(including filter):
4.4 US qt (4.2 )
Make sure the oil filter gasket is
not stuck to the contacting surface
of the engine. If it is, remove it
before installing a new oil filter.
7. Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine, and check your work.
351
