Handling the Unexpected-> Fuses for Your Honda CR-V SUV Fourth Generation (2011-2015)

uuFusesuInspecting and Changing Fuses  
Inspecting and Changing Fuses  
1. Turn the ignition switch to LOCK (0*1. Turn  
1Inspecting and Changing Fuses  
headlights and all accessories off.  
2. Remove the fuse box cover.  
3. Check the large fuse in the engine  
compartment.  
Blown Fuse  
NOTICE  
Replacing a fuse with one that has a higher rating  
greatly increases the chances of damaging the  
electrical system.  
u If the fuse is blown, use a Phillips-head  
screwdriver to remove the screw and  
replace it with a new one.  
Replace fuse with a spare fuse of the same specified  
amperage.  
Combined  
Fuse  
Confirm the specified amperage using the charts on  
P. 503 to 504.  
4. Inspect the small fuses in the engine  
compartment and the vehicle interior.  
u If there is a burned out fuse, remove it  
with the fuse puller and replace it with a  
new one.  
Fuse Puller  
Use the charts to locate the fuse in question and  
conform the specific amperage on the fuse label.  
2 Fuse Locations P. 503  
There is a fuse puller on the back of the engine  
compartment fuse box cover.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
505  
 
Emergency Towing  
Call a professional towing service if you need to tow your vehicle.  
1Emergency Towing  
NOTICE  
All models  
Trying to lift or tow your vehicle by the bumpers will  
cause serious damage. The bumpers are not designed  
to support the vehicle's weight.  
Flat bed equipment  
The operator loads your vehicle on the back of a truck.  
This is the best way to transport your vehicle.  
NOTICE  
Improper towing such as towing behind a motor  
vehicle can damage the transmission.  
2WD models  
Wheel lift equipment  
The tow truck uses two pivoting arms that go under the front tires and lift them off  
the ground. The rear tires remain on the ground. This is an acceptable way to  
tow your vehicle.  
Never tow your vehicle with just a rope or chain.  
It is very dangerous since ropes or chains may shift  
from side to side or break.  
506  
 
When You Cannot Open the Tailgate  
1When You Cannot Open the Tailgate  
What to Do When Unable to Open the Tailgate  
What to do-following up  
After taking these steps, contact a dealer to have the  
vehicle checked.  
If you cannot open the tailgate, use the following procedure.  
1. Use a flat-tip screwdriver and remove the  
cover on the inside of the tailgate.  
u Wrap the flat-tip screwdriver with a cloth  
to prevent scratches.  
When you open the tailgate from inside, make sure  
there is enough space around the tailgate, and it  
does not hit anyone or any object.  
Cover  
Lever  
Models with power tailgate  
2.  
Models with power tailgate  
To open the tailgate, push the tailgate  
while pushing the lever to the right.  
Models without power tailgate  
To open the tailgate, push the tailgate  
while sliding the lever using a flat-tip screw  
driver.  
2.  
Models without power tailgate  
Lever  
507