2011-2015 Honda CR-V SUV Maintenance User Manual

MY CAR USER MANUAL

Maintenance for Your Honda CR-V SUV Fourth Generation (2011-2015)

Before Performing Maintenance  
Inspection and Maintenance  
For your safety, perform all listed inspections and maintenance to keep your vehicle  
in good condition. If you become aware of any abnormality (noise, smell, insufficient  
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.  
(Note, however, that service at a dealer is not mandatory to keep your warranties in  
effect.) Refer to the separate maintenance booklet for detailed maintenance and  
inspection information.  
1Inspection and Maintenance  
U.S. models  
Maintenance, replacement, or repair of  
emissions control devices and systems may be  
done by any automotive repair establishment or  
individuals using parts that are “certified” to  
EPA standards.  
According to state and federal regulations, failure to  
perform maintenance on the maintenance main  
items marked with # will not void your emissions  
warranties. However, all maintenance services should  
be performed in accordance with the intervals  
indicated by the information display*/multi-  
information display*/intelligent multi-information  
display (i-MID).  
Types of Inspection and Maintenance  
■
■
Daily inspections  
Perform inspections before long distance trips, when washing the vehicle, or when  
refueling.  
■
Periodic inspections  
• Check the brake fluid level monthly.  
2 Checking the Brake Fluid P. 450  
2 Maintenance Service Items P. 434  
• Check the tire pressure monthly. Examine the tread for wear and foreign objects.  
2 Checking and Maintaining Tires P. 465  
If you want to perform complex maintenance tasks  
that require more skills and tools, you can purchase a  
subscription to the Service Express website at  
www.techinfo.honda.com.  
• Check the operation of the exterior lights monthly.  
2 Replacing Light Bulbs P. 452  
2 Authorized Manuals P. 519  
• Check the condition of the wiper blades at least every six months.  
2 Checking and Maintaining Wiper Blades P. 461  
If you want to perform maintenance yourself, make  
sure that you have the necessary tools and skills first.  
After performing maintenance, update the records in  
the separate maintenance booklet.  
* Not available on all models  
426  
 
uuBefore Performing MaintenanceuSafety When Performing Maintenance  
1Safety When Performing Maintenance  
Safety When Performing Maintenance  
Some of the most important safety precautions are given here.  
However, we cannot warn you of every conceivable hazard that can arise in  
performing maintenance. Only you can decide whether or not you should perform  
a given task.  
3
WARNING  
Improperly maintaining this vehicle or  
failing to correct a problem before driving  
can cause a crash in which you can be  
seriously hurt or killed.  
Maintenance Safety  
■
• To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames  
away from the battery and all fuel related parts.  
Always follow the inspection and  
• Never leave rags, towels, or other flammable objects under the hood.  
u Heat from the engine and exhaust can ignite them causing a fire.  
• To clean parts, use a commercially available degreaser or parts cleaner, not  
gasoline.  
• Wear eye protection and protective clothing when working with the battery or  
compressed air.  
maintenance recommendations according  
to the schedules in this owner's manual.  
3
WARNING  
Failure to properly follow maintenance  
instructions and precautions can cause you  
to be seriously hurt or killed.  
• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.  
u Operate the engine only when there is sufficient ventilation.  
Always follow the procedures and  
precautions in this owner's manual.  
Vehicle Safety  
■
• The vehicle must be in a stationary condition.  
u Make sure your vehicle is parked on level ground, the parking brake is set, and  
the engine is off.  
• Be aware that hot parts can burn you.  
u Make sure to let the engine and exhaust system cool thoroughly before  
touching vehicle parts.  
• Be aware that moving parts can injure you.  
u Do not start the engine unless instructed, and keep your hands and limbs away  
from moving parts.  
427  
 
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service  
Parts and Fluids Used in Maintenance Service  
The use of Honda genuine parts and fluids is recommended when maintaining and  
servicing your vehicle. Honda genuine parts are manufactured according to the  
same high quality standards used in Honda vehicles.  
428  
Maintenance MinderTM  
If the engine oil life is less than 15%, you will see the Maintenance Minder messages  
appear on the information display*/multi-information display* and the i-MID every  
time you turn the ignition switch to ON (w*1. The messages notify you when to  
change the engine oil, or when to bring your vehicle to a dealer for indicated  
maintenance services.  
1To Use Maintenance MinderTM  
Based on the engine operating conditions, the  
remaining engine oil life is calculated and displayed  
as a percentage.  
Displayed Engine Oil Calculated Engine Oil  
Life (%)  
100  
90  
Life (%)  
100 to 91  
90 to 81  
80 to 71  
70 to 61  
60 to 51  
50 to 41  
40 to 31  
30 to 21  
20 to 16  
15 to 11  
10 to 6  
5 to 1  
To Use Maintenance MinderTM  
Displaying the Engine Oil Life on the Information Display*  
80  
70  
60  
50  
40  
30  
20  
15  
■
1. Turn the ignition switch to ON (w*1  
2. Press the (Select/Reset) knob repeatedly  
until the engine oil life appears on the  
information display.  
.
The Maintenance Minder indicator (  
) stays  
on in the instrument panel after the engine oil  
life becomes 0%. Have the indicated  
maintenance done by a dealer immediately.  
10  
5
0
0
There is a list of maintenance main and sub items you  
can view on the i-MID.  
2 Maintenance Service Items P. 434  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
Continued  
429  
 
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Displaying the Engine Oil Life on the Multi-Information  
Display*  
■
Maintenance Service  
Items  
Remaining Engine Oil  
Life  
Button  
1. Set the power mode to ON.  
2. Press the  
button repeatedly until the engine oil life appears on the multi-  
information display.  
* Not available on all models  
430  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Displaying the Engine Oil Life and Maintenance Items on  
the i-MID  
■
Maintenance items, which should be serviced at the same time that you replace the  
engine oil, appear on the i-MID.  
You can view them on the Maintenance info screen at any time.  
1. Turn the ignition switch to ON (w*1  
.
2. Press the MENU button to go to the Vehicle Menu screen.  
3. Select Vehicle Information, then press the SOURCE button.  
4. Press the SOURCE button again to go to the Maintenance info screen. The  
engine oil life appears on the i-MID.  
Main  
Item  
Engine Oil Life  
Sub  
Item  
SOURCE  
Button  
6285&(  
0(18  
MENU Button  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
Continued  
431  
 
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Maintenance Minder Messages on the i-MID and Information Display*  
■
Oil Life Display on the  
Information Display  
Oil Life Display  
Explanation  
Information  
Maintenance Minder  
Indicator  
15%  
The engine oil life indicator The engine oil is  
approaching the end of  
its service life.  
starts to appear along with  
other due soon  
2345  
15  
maintenance item codes  
when the remaining oil life  
becomes 15 percent.  
Engine oil  
Air filters  
Starts to come on when  
5%  
The SERVICE message also The engine oil has almost the remaining engine oil  
reached the end of its  
service life, and the  
maintenance items  
should be inspected and  
serviced as soon as  
possible.  
life becomes 15 percent.  
It goes off when the  
display is switched.  
starts to appear along with  
the engine oil life indicator  
and the maintenance item  
codes.  
2345  
5
Engine oil  
Air filters  
The remaining engine oil  
life has passed its service  
life, and a negative distance  
appears after driving over  
10 miles (U.S. models) or 10  
km (Canadian models). The  
negative distance on the  
display blinks.  
The engine oil life has  
passed. The  
maintenance items must  
be inspected and  
Stays on as a reminder  
even when the display is  
switched.  
—
serviced immediately.  
* Not available on all models  
432  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Maintenance Minder Messages on the i-MID and Multi-Information Display*  
■
Maintenance  
Message  
Oil Life Display on  
the Multi-  
Oil Life Display  
Explanation  
Information  
Information Display  
15%  
The remaining engine oil life is 15 The engine oil is  
SERVICE DUE SOON  
SERVICE DUE NOW  
approaching the end of its  
to 6 percent. Once you switch the  
2345  
15  
service life, and the  
maintenance items should  
be inspected and serviced  
soon.  
display by pressing the  
button, this message will go off.  
Engine oil  
Air filters  
5%  
The remaining engine oil life is 5 The engine oil has almost  
reached the end of its  
service life, and the  
maintenance items should  
be inspected and serviced  
as soon as possible.  
to 1 percent. Press the  
button to switch to another  
display.  
2345  
5
Engine oil  
Air filters  
The remaining engine oil life has The engine oil life has  
SERVICE PAST DUE  
passed. The maintenance  
items must be inspected  
and serviced immediately.  
passed its service life, and a  
negative distance appears after  
driving over 10 miles (U.S. models)  
or 10 km (Canadian models). Press  
—
the  
button to switch to  
another display.  
The system message indicator ( ) comes on along with the Maintenance Minder message.  
* Not available on all models  
Continued  
433  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
1Maintenance Service Items  
Maintenance Service Items  
■
•
•
•
Independent of the Maintenance Minder  
information, replace the brake fluid every 3 years.  
Inspect idle speed every 160,000 miles (256,000  
km).  
Adjust the valves during services A, B, 1, 2, or 3 if  
they are noisy.  
Models with information display  
Maintenance Minder  
Message  
System Message  
Indicator  
Main  
Item  
Sub Items  
Models with multi-information display  
System Message  
Indicator  
Maintenance Minder  
Message  
Main  
Item  
Sub Items  
434  
 
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
CODE  
A
B
Maintenance Main Items  
Replace engine oil*1  
Replace engine oil*1 and oil filter  
Inspect front and rear brakes  
Check parking brake adjustment  
Inspect tie rod ends, steering gearbox, and boots  
Inspect suspension components  
CODE  
1
2
Maintenance Sub Items  
Rotate tires  
Replace air cleaner element*2  
Replace dust and pollen filter*3  
Inspect drive belt  
Replace transmission fluid*4  
Replace spark plugs  
Inspect valve clearance  
Replace engine coolant  
Replace rear differential fluid*  
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
3
4
●
●
Inspect driveshaft boots  
Inspect brake hoses and lines (Including ABS/VSA)  
Inspect all fluid levels and condition of fluids  
Inspect exhaust system#  
Inspect fuel lines and connections#  
●
●
5
6
*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).  
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and  
from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).  
*4: Driving in mountainous areas at very low vehicle speeds or trailer towing results in higher transmission  
temperatures. This requires transmission fluid changes more frequently than recommended by the  
Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission  
fluid changed every 25,000 miles (40,000 km).  
*1: If a message SERVICE does not appear more than 12 months after the display is reset, change the  
engine oil every year.  
# : See information on maintenance and emissions warranty.  
* Not available on all models  
Continued  
435  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
1Resetting the Display  
Resetting the Display  
■
NOTICE  
Reset the engine oil life display if you have performed the maintenance service.  
Failure to reset the engine oil life after a maintenance  
service results in the system showing incorrect  
maintenance intervals, which can lead to serious  
mechanical problems.  
Models with information display  
1. Turn the ignition switch to ON (w*1  
2. Display the engine oil life by repeatedly  
pressing the (Select/Reset) knob.  
.
The dealer will reset the engine oil life display after  
completing the required maintenance service. If  
someone other than a dealer performs maintenance  
service, reset the engine oil life display yourself.  
3. Press and hold the  
knob for 10 seconds  
or more.  
u The engine oil life indicator and the  
maintenance item codes blink.  
4. Press the  
knob for five seconds or more.  
u The displayed maintenance items  
disappear, and the engine oil life display  
returns to 100%.  
436  
 
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Models with multi-information display  
Engine Oil Life  
Maintenance Item Codes  
SEL/RESET Button  
Button  
1. Set the power mode to ON.  
2. Select VEHICLE SETTINGS using the  
button.  
3. Select MAINTENANCE RESET using the  
RESET button.  
button, then press the SEL/RESET  
button, then press the SEL/  
4. Select RESET using the  
button, then press the SEL/RESET button.  
u The service code will disappear and the engine oil life display will return to  
100%.  
To cancel the oil life reset mode, select CANCEL, then press the SEL/RESET button.  
Continued  
437  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
All models  
Engine  
Oil Life  
Maintenance Item Codes  
SOURCE  
Button  
(- Button  
1. Turn the ignition switch to ON (w*1  
2. Go to the Maintenance info screen.  
.
2 Displaying the Engine Oil Life and Maintenance Items on the i-MID P. 431  
3. Press the SOURCE button.  
u The oil life reset mode is displayed on the i-MID.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
438  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
4. Select Yes with the (- button, then press the SOURCE button.  
u The displayed maintenance items disappear, and the engine oil life display  
returns to 100%.  
u Any maintenance items that are necessary for your vehicle at the next  
maintenance service will appear.  
To cancel the oil life reset mode, select No, then press the SOURCE button.  
439  
Maintenance Under the Hood  
Maintenance Items Under the Hood  
Engine Oil Dipstick  
(Orange)  
Engine Oil Fill Cap  
Brake Fluid  
(Black Cap)  
Washer Fluid  
(Blue Cap)  
Battery  
Engine Coolant  
Reserve Tank  
Radiator Cap  
440  
uuMaintenance Under the HooduOpening the Hood  
Opening the Hood  
1. Park the vehicle on level ground, and set  
the parking brake.  
1Opening the Hood  
Hood Release Handle  
NOTICE  
2. Pull the hood release handle under the  
lower left corner of the dashboard.  
u The hood will pop up slightly.  
Do not open the hood when the wiper arms are  
raised.  
The hood will strike the wipers, and may damage  
either the hood or the wipers.  
Pull  
When closing the hood, check that the hood is  
securely latched.  
3. Push up the hood latch lever in the center  
of the hood to release the lock mechanism,  
and open the hood.  
If the hood latch lever moves stiffly, or if you can  
open the hood without lifting the lever, the latch  
mechanism should be cleaned and lubricated.  
Lever  
4. Remove the support rod from the clamp  
using the grip. Mount the support rod in  
the hood.  
Support Rod Grip  
When closing, remove the support rod, and  
stow it in the clamp, then gently lower the  
hood. Remove your hand at a height of  
approximately 12 inches (30 cm) and let the  
hood close.  
Clamp  
441  
 
uuMaintenance Under the HooduRecommended Engine Oil  
Recommended Engine Oil  
1Recommended Engine Oil  
• Genuine Honda Motor Oil  
• Premium-grade 0W-20 detergent oil with an API Certification Seal on the  
Engine Oil Additives  
Your vehicle does not require oil additives. In fact,  
they may adversely affect the engine performance  
and durability.  
container.  
Oil is a major contributor to your engine's  
performance and longevity. If you drive the  
vehicle with insufficient or deteriorated oil,  
the engine may fail or be damaged.  
This seal indicates the oil is energy conserving  
and that it meets the American Petroleum  
Institute’s latest requirements.  
Use a Genuine Honda Motor Oil or another  
commercial engine oil of suitable viscosity for  
the ambient temperature as shown here.  
Ambient Temperature  
■
Synthetic oil  
You may also use synthetic motor oil if it is labeled with the API Certification Seal  
and is the specified viscosity grade.  
442  
 
uuMaintenance Under the HooduOil Check  
Oil Check  
We recommend that you check the engine oil level every time you refuel.  
1Oil Check  
Park the vehicle on level ground.  
Wait approximately three minutes after turning the engine off before you check the  
If the oil level is near or below the lower mark, slowly  
add oil being careful not to overfill.  
oil.  
1. Remove the dipstick (orange handle).  
2. Wipe the dipstick with a clean cloth or  
paper towel.  
3. Insert the dipstick back all the way into its  
hole.  
4. Remove the dipstick again, and check the  
level. It should be between the upper and  
lower marks. Add oil if necessary.  
Upper Mark  
Lower Mark  
443  
 
uuMaintenance Under the HooduAdding Engine Oil  
Adding Engine Oil  
1. Unscrew and remove the engine oil fill cap. 1Adding Engine Oil  
2. Add oil slowly.  
3. Reinstall the engine oil fill cap, and tighten  
it securely.  
If any oil spills, wipe it away immediately. Spilled oil  
may damage the engine compartment components.  
NOTICE  
4. Wait for three minutes and recheck the  
engine oil dipstick.  
Do not fill the engine oil above the upper mark.  
Overfilling the engine oil can result in leaks and  
engine damage.  
Engine Oil  
Fill Cap  
444  
 
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
Changing the Engine Oil and Oil Filter  
You must change the engine oil and oil filter regularly in order to maintain the  
engine's lubrication. The engine may be damaged if they are not changed regularly.  
1Changing the Engine Oil and Oil Filter  
NOTICE  
You may damage the environment if you do not  
dispose of the oil in a suitable way. If you are  
changing the oil by yourself, appropriately dispose of  
the used oil. Put the oil in a sealed container and take  
it to a recycling center. Do not throw the oil away  
into a garbage can or onto the ground.  
Change the oil and filter in accordance with the maintenance message on the  
information display*/multi-information display*/i-MID.  
1. Run the engine until it reaches normal  
operating temperature, and then turn the  
engine off.  
2. Open the hood and remove the engine oil  
fill cap.  
3. Remove the drain bolt and washer from  
the bottom of the engine, and drain the  
oil into a suitable container.  
Washer  
Drain Bolt  
Oil Filter  
* Not available on all models  
Continued  
445  
 
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
4. Remove the oil filter and dispose of the remaining oil.  
5. Check that the filter gasket is not stuck to the engine contact surface.  
u If it is stuck, you must detach it.  
1Changing the Engine Oil and Oil Filter  
You will need a special wrench to replace the oil  
filter. You can buy this wrench from a dealer.  
6. Wipe away dirt and dust adhering to the contact surface of the engine block,  
and install a new oil filter.  
u Apply a light coat of new engine oil to the oil filter gasket.  
7. Put a new washer on the drain bolt, then reinstall the drain bolt.  
u Tightening torque:  
When installing the new oil filter, follow the  
instructions supplied with the oil filter.  
Reinstall the engine oil fill cap. Start the engine. The  
low oil pressure indicator should go off within five  
seconds. If it does not, turn off the engine, and check  
your work.  
30 lbf∙ft (40 N∙m, 4.0 kgf∙m)  
8. Pour the recommended engine oil into the engine.  
u Engine oil change capacity (including filter):  
4.6 US qt (4.4 L)  
9. Reinstall the engine oil fill cap securely and start the engine.  
10. Run the engine for a few minutes, and then check that there is no leak from the  
drain bolt or oil filter.  
Be sure to verify that the oil filter is designed for your  
vehicle. A genuine Honda oil filter is recommended  
for optimum lubrication flow and filtration properties  
to assure the reliability of the engine.  
11. Stop the engine, wait for three minutes, and then check the oil level on the  
dipstick.  
u If necessary, add more engine oil.  
446  
uuMaintenance Under the HooduEngine Coolant  
Engine Coolant  
1Engine Coolant  
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2  
If Honda antifreeze/coolant is not available, you may  
use another major brand non-silicate coolant as a  
temporary replacement. Check that it is a high quality  
coolant recommended for aluminum engines.  
Continued use of any non-Honda coolant can result  
in corrosion, causing the cooling system to  
malfunction or fail. Have the cooling system flushed  
and refilled with Honda antifreeze/coolant as soon as  
possible.  
This coolant is premixed with 50% antifreeze and 50% water. Do not add any  
straight antifreeze or water.  
We recommend you check the engine coolant level every time you refuel. Check the  
reserve tank first. If it is completely empty, also check the coolant level in the  
radiator. Add the engine coolant accordingly.  
Reserve Tank  
■
Do not add rust inhibitors or other additives to your  
vehicle's cooling system. They may not be compatible  
with the coolant or with the engine components.  
1. Check the amount of coolant in the reserve  
tank.  
MAX  
Reserve  
Tank  
MIN  
2. If the coolant level is below the MIN mark,  
add the specified coolant until it reaches  
the MAX mark.  
3. Inspect the cooling system for leaks.  
Continued  
447  
 
uuMaintenance Under the HooduEngine Coolant  
1Radiator  
Radiator  
■
1. Make sure the engine and radiator are  
cool.  
3
WARNING  
Radiator Cap  
Removing the radiator cap while the  
engine is hot can cause the coolant to spray  
out, seriously scalding you.  
2. Turn the radiator cap counterclockwise to  
relieve any pressure in the cooling system.  
Do not push the cap down when turning.  
3. Push down and turn the radiator cap  
counterclockwise to remove it.  
Always let the engine and radiator cool  
down before removing the radiator cap.  
4. The coolant level should be up to the base  
of the filler neck. Add coolant if it is low.  
5. Put the radiator cap back on, and tighten it  
fully.  
6. Pour coolant into the reserve tank until it  
reaches the MAX mark. Put the cap back  
on the reserve tank.  
NOTICE  
Pour the fluid slowly and carefully so you do not spill  
any. Clean up any spills immediately; they can  
damage components in the engine compartment.  
448  
 
uuMaintenance Under the HooduTransmission Fluid  
1Continuously Variable Transmission Fluid  
Transmission Fluid  
Continuously Variable Transmission Fluid  
■
NOTICE  
Specified fluid: Honda HCF-2 Transmission Fluid  
Do not mix HCF-2 with other transmission fluids.  
Using a transmission fluid other than HCF-2 may  
adversely affect the operation and durability of your  
vehicle’s transmission, and damage the transmission.  
Any damage caused by using a transmission fluid that  
is not equivalent to HCF-2 is not covered by Honda’s  
new vehicle warranty.  
Have a dealer check the fluid level and replace if necessary.  
449  
 
uuMaintenance Under the HooduBrake Fluid  
Brake Fluid  
1Brake Fluid  
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3  
NOTICE  
Brake fluid marked DOT 5 is not compatible with your  
vehicle's braking system and can cause extensive  
damage.  
Checking the Brake Fluid  
■
The fluid level should be between the MIN  
and MAX marks on the side of the reservoir.  
Brake Reservoir  
If the specified brake fluid is not available, you should  
use only DOT 3 or DOT 4 fluid from a sealed  
container as a temporary replacement.  
MAX  
MIN  
Using any non-Honda brake fluid can cause corrosion  
and decrease the longevity of the system. Have the  
brake system flushed and refilled with Honda Heavy  
Duty Brake Fluid DOT 3 as soon as possible.  
If the brake fluid level is at or below the MIN mark,  
have a dealer inspect the vehicle for leaks or worn  
brake pad as soon as possible.  
450  
   
uuMaintenance Under the HooduRefilling Window Washer Fluid  
1Refilling Window Washer Fluid  
Refilling Window Washer Fluid  
Check the amount of window washer fluid by looking at the reservoir.  
If the level is low, fill the washer reservoir.  
NOTICE  
Do not use engine antifreeze or a vinegar/water  
solution in the windshield washer reservoir.  
Antifreeze can damage your vehicle's paint. A  
vinegar/water solution can damage the windshield  
washer pump.  
Canadian models with information display  
If the washer fluid is low, the washer level indicator comes on.  
Canadian models with multi-information display  
If the washer fluid is low, a message appears on the multi-information display.  
Pour the washer fluid carefully. Do not overflow the reservoir.  
451  
 
Replacing Light Bulbs  
Headlight Bulbs  
When replacing, use the following bulbs.  
1Headlight Bulbs  
High beam headlight: 60 W (HB3)  
NOTICE  
Halogen bulbs get very hot when lit.  
Oil, perspiration, or a scratch on the glass can cause  
the bulb to overheat and shatter.  
Low beam headlight: 55 W (H11 for halogen bulb type)  
High Beam Headlight  
■
1. Push the tab to remove the coupler.  
2. Rotate the old bulb to the left to remove.  
3. Insert a new bulb into the headlight  
assembly and turn it to the right.  
4. Insert the coupler into the connector of the  
bulb.  
The headlight aim is set by the factory, and does not  
need to be adjusted. However, if you regularly carry  
heavy items in the cargo area or tow a trailer, have  
the aiming readjusted at a dealer or by a qualified  
technician.  
Bulb  
When replacing a halogen bulb, handle it by its base,  
and protect the glass from contact with your skin or  
hard objects. If you touch the glass, clean it with  
denatured alcohol and a clean cloth.  
Tab  
Coupler  
452  
   
uuReplacing Light BulbsuFog Light Bulbs*  
Low Beam Headlights  
■
1. Push the tab to remove the coupler.  
2. Rotate the old bulb to the left to remove.  
3. Insert a new bulb into the headlight  
assembly and turn it to the right.  
4. Insert the coupler into the connector of the  
bulb.  
Bulb  
Coupler  
Tab  
Fog Light Bulbs*  
1Fog Light Bulbs*  
When replacing, use the following bulbs.  
NOTICE  
Halogen bulbs get very hot when lit. Oil, perspiration,  
or a scratch on the glass can cause the bulb to  
overheat and shatter.  
Fog Light: 35 W (H8 for halogen bulb type)  
1. Pull the hole of the cover with your finger,  
then remove it.  
Cover  
When replacing a halogen bulb, handle it by its  
plastic case, and protect the glass from contact with  
your skin or hard objects. If you touch the glass, clean  
it with denatured alcohol and a clean cloth.  
Hole  
* Not available on all models  
Continued  
453  
 
uuReplacing Light BulbsuFog Light Bulbs*  
2. Remove the screw using a Phillips-head  
screwdriver and carefully pull the fog light  
assembly out of the bumper.  
Screw  
3. Push the tab to remove the coupler.  
4. Rotate the old bulb to the left to remove.  
5. Insert new bulb.  
Bulb  
Tab  
Coupler  
454  
uuReplacing Light BulbsuFront Turn Signal/Side Marker Light/Parking Light Bulbs  
Models without smart entry system  
Front Turn Signal/Side Marker Light/Parking Light  
Bulbs  
When replacing, use the following bulbs.  
Front Turn Signal/Side Marker Light/Parking Light: 28/8 W (Amber)  
1. Turn the socket to the left and remove it,  
then remove the old bulb.  
2. Insert a new bulb.  
Bulb  
Socket  
455  
uuReplacing Light BulbsuFront Turn Signal/Side Marker Light Bulbs  
Models with smart entry system  
Front Turn Signal/Side Marker Light Bulbs  
When replacing, use the following bulbs.  
Front Turn Signal/Side Marker Light: 28/8 W (Amber)  
1. Turn the socket to the left and remove it,  
then remove the old bulb.  
2. Insert a new bulb.  
Bulb  
Socket  
Models with smart entry system  
Parking Light Bulbs  
Parking light bulbs are LED type. Have an authorized Honda dealer inspect and  
replace the light bulbs.  
456  
uuReplacing Light BulbsuSide Turn Signal/Emergency Indicator Light Bulbs*  
Side Turn Signal/Emergency Indicator Light Bulbs*  
Door mirrors have the side turn lights. Have an authorized Honda dealer inspect and  
replace the light assembly.  
Brake Light, Taillight, Back-Up Light, Rear Turn  
Signal Light and Lower Rear Side Marker Light Bulbs  
When replacing, use the following bulbs.  
1Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and  
Lower Rear Side Marker Light Bulbs  
Lower Rear Side Marker/Brake/Taillight: 21/5W  
Back-Up Light: 21W  
Rear Turn Signal Light: 21W (Amber)  
1. Use a Phillip-head screwdriver to remove  
the bolts.  
Bolts  
Cap  
2. Pull the light assembly out of the rear pillar.  
If it is difficult to remove the light assembly, remove  
the cap.  
* Not available on all models  
Continued  
457  
 
uuReplacing Light BulbsuBrake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear Side Marker Light Bulbs  
3. Turn the socket to the left and remove it.  
Remove the old bulb.  
4. Insert a new bulb.  
Bulb  
Socket  
Guide  
5. Reinstall the light assembly by sliding it on  
to the guide on the body.  
458  
uuReplacing Light BulbsuUpper Rear Side Marker/Taillight Bulbs  
Upper Rear Side Marker/Taillight Bulbs  
When replacing, use the following bulbs.  
Upper Rear Side Marker/Taillight: 3CP  
1. Remove the lower taillight assembly.  
2 Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear  
Side Marker Light Bulbs P. 457  
2. Use a Phillip-head screwdriver to remove  
the bolt.  
3. Pull the light assembly out of the rear pillar.  
Bolt  
4. Turn the socket to the left and remove it.  
Remove the old bulb.  
5. Insert a new bulb.  
Socket  
Bulb  
459  
uuReplacing Light BulbsuRear License Plate Light Bulb  
Rear License Plate Light Bulb  
When replacing, use the following bulb.  
Rear License Plate Light: 3CP  
1. Push the left edge of the lens to the right  
and pull out the license light assembly.  
2. Push the tabs to remove the lens.  
3. Remove the old bulb.  
Tab  
4. Insert a new bulb.  
Bulb  
Tab  
Lens  
High-Mount Brake Light Bulb  
High-mount brake light bulbs are LED type. Have an authorized Honda dealer  
inspect and replace the light bulbs.  
460  
Checking and Maintaining Wiper Blades  
Checking Wiper Blades  
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces  
of the blade may scratch the window glass.  
Changing the Front Wiper Blade Rubber  
1Changing the Front Wiper Blade Rubber  
1. Lift the driver side wiper arm first, then the  
NOTICE  
Avoid dropping the wiper arm; it may damage the  
windshield.  
passenger side.  
2. Push the lock tab up.  
3. Slide the blade from the wiper arm.  
Lock Tab  
Continued  
461  
   
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber  
4. Slide the wiper blade out from its holder by  
pulling the tabbed end out.  
Blade  
5. Remove the retainers from the rubber blade  
that has been removed, and mount to a  
new rubber blade.  
Retainer  
Blade  
Top  
u Correctly align the rubber protrusion and  
the retainer grooves.  
6. Slide the new wiper blade onto the holder  
from the bottom end.  
Indent  
u The tab on the holder should fit in the  
indent of the wiper blade.  
7. Slide the wiper blade onto the wiper arm  
until it clicks.  
Tab  
8. Lower the passenger side wiper arm first,  
then the driver side.  
462  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
Changing the Rear Wiper Blade Rubber  
1. Raise the rear wiper arm up and away from  
1Changing the Rear Wiper Blade Rubber  
the rear window.  
NOTICE  
Avoid dropping the wiper arm; it may damage the  
rear window.  
2. Pull up the lock tab and release the wiper  
arm.  
Lock Tab  
3. Slide the wiper blade out from the end with  
the indent.  
Blade  
Continued  
463  
 
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
4. Remove the retainers from wiper blade and  
mount to a new rubber blade.  
Retainer  
Rubber  
5. Slide the wiper blade onto the holder.  
u Make sure it is engaged correctly, then  
install the wiper blade assembly onto the  
wiper arm.  
464  
Checking and Maintaining Tires  
Checking Tires  
To safely operate your vehicle, your tires must be of the proper type and size, in  
good condition with adequate tread, and properly inflated.  
1Checking Tires  
3
WARNING  
■
Inflation guidelines  
Using tires that are excessively worn or  
improperly inflated can cause a crash in  
which you can be seriously hurt or killed.  
Properly inflated tires provide the best combination of handling, tread life, and comfort.  
Refer to the driver’s doorjamb label or specification’s page for the specified pressure.  
Follow all instructions in this owner’s  
manual regarding tire inflation and  
maintenance.  
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and  
are more likely to fail from overheating.  
Overinflated tires make your vehicle ride harshly, are more prone to road hazards,  
and wear unevenly.  
Measure the air pressure when tires are cold. This  
means the vehicle has been parked for at least three  
hours, or driven less than 1 mile (1.6 km). If  
necessary, add or release air until the specified  
pressure is reached.  
Every day before you drive, look at each of the tires. If one looks lower than the  
others, check the pressure with a tire gauge.  
At least once a month or before long trips, use a gauge to measure the pressure in  
all tires, including the spare. Even tires in good condition can lose 1 to 2 psi (10 to  
20 kPa, 0.1 to 0.2 kgf/cm2) per month.  
If checked when hot, tire pressure can be as much as  
4–6 psi (30–40 kPa, 0.3–0.4 kgf/cm2) higher than if  
checked when cold.  
■
Inspection guidelines  
Have a dealer check the tires if you feel a consistent  
vibration while driving. New tires and any that have  
been removed and reinstalled should be properly  
balanced.  
Every time you check inflation, also examine the tires and valve stems.  
Look for:  
• Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts,  
splits, or cracks in the side of the tire. Replace it if you see fabric or cord.  
• Remove any foreign objects and inspect for air leaks.  
• Uneven tread wear. Have a dealer check the wheel alignment.  
• Excessive tread wear.  
2 Wear Indicators P. 470  
• Cracks or other damage around valve stem.  
465  
   
uuChecking and Maintaining TiresuTire and Loading Information Label  
Tire and Loading Information Label  
The label attached to the driver’s doorjamb provides necessary tire and loading  
information.  
1Tire and Loading Information Label  
The tire and loading information label attached to the  
driver’s doorjamb contains:  
a
b
The number of people your vehicle can carry.  
The total weight your vehicle can carry. Do not  
exceed this weight.  
Label  
Example  
c
d
The original tire sizes for front, rear, and spare.  
The proper cold tire pressure for front, rear, and  
spare.  
1Tire Sizes  
Tire Labeling  
Following is an example of tire size with an  
explanation of what each component means.  
215/70R16 100S  
215: Tire width in millimeters.  
70: Aspect ratio (the tire’s section height as a  
percentage of its width).  
The tires that came on your vehicle have a  
number of markings. Those you should be  
aware of are described below.  
Example  
Tire Size  
Tire  
Identification  
Number (TIN)  
Maximum  
Tire Load  
R: Tire construction code (R indicates radial).  
16: Rim diameter in inches.  
Maximum  
Tire Pressure  
Tire Size  
100: Load index (a numerical code associated with  
the maximum load the tire can carry).  
S: Speed symbol (an alphabetical code indicating the  
maximum speed rating).  
Tire Sizes  
■
Whenever tires are replaced, they should be replaced with tires of the same size.  
466  
   
uuChecking and Maintaining TiresuTire Labeling  
1Tire Identification Number (TIN)  
Tire Identification Number (TIN)  
■
DOT B97R FW6X 2209  
The tire identification number (TIN) is a group of numbers and letters that look like  
the example in the side column. TIN is located on the sidewall of the tire.  
DOT: This indicates that the tire meets all  
requirements of the U.S. Department of  
Transportation.  
B97R: Manufacturer's identification mark.  
FW6X: Tire type code.  
22 09: Date of manufacture.  
Glossary of Tire Terminology  
Cold Tire Pressure – The tire air pressure when the vehicle has been parked for at  
least three hours or driven less than 1 mile (1.6 km).  
Load Rating – Means the maximum load that a tire is rated to carry for a given  
inflation pressure.  
■
Year  
Week  
Maximum Inflation Pressure – The maximum tire air pressure that the tire can  
hold.  
Maximum Load Rating – Means the load rating for a tire at the maximum  
permissible inflation pressure for that tire.  
Recommended Inflation Pressure – The cold tire inflation pressure recommended  
by the manufacturer.  
Treadwear Indicators (TWI) – Means the projections within the principal grooves  
designed to give a visual indication of the degrees of wear of the tread.  
467  
 
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)  
DOT Tire Quality Grading (U.S. Vehicles)  
The tires on your vehicle meet all U.S. Federal Safety  
Requirements. All tires are also graded for treadwear, traction,  
and temperature performance according to Department of  
Transportation (DOT) standards. The following explains these  
gradings.  
Uniform Tire Quality Grading  
1Uniform Tire Quality Grading  
■
For example:  
Quality grades can be found where applicable on the tire sidewall  
between tread shoulder and maximum section width.  
Treadwear 200  
Traction AA  
Temperature A  
Treadwear  
■
The treadwear grade is a comparative rating based on the wear  
rate of the tire when tested under controlled conditions on a  
specified government test course. For example, a tire graded 150  
would wear one and one-half (1 1/2) times as well on the  
government course as a tire graded 100. The relative performance  
of tires depends upon the actual conditions of their use, however,  
and may depart significantly from the norm due to variations in  
driving habits, service practices and differences in road  
characteristics and climate.  
All passenger car tires must conform  
to Federal Safety Requirements in  
addition to these grades.  
468  
 
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)  
1Traction  
Traction  
■
Warning: The traction grade  
The traction grades, from highest to lowest, are AA, A, B, and C.  
Those grades represent the tire's ability to stop on wet pavement  
as measured under controlled conditions on specified  
government test surfaces of asphalt and concrete. A tire marked  
C may have poor traction performance.  
assigned to this tire is based on  
straight-ahead braking traction tests,  
and does not include acceleration,  
cornering, hydroplaning, or peak  
traction characteristics.  
1Temperature  
Temperature  
■
Warning: The temperature grade for  
this tire is established for a tire that is  
properly inflated and not  
overloaded. Excessive speed,  
underinflation, or excessive loading,  
either separately or in combination,  
can cause heat buildup and possible  
tire failure.  
The temperature grades are A (the highest), B, and C,  
representing the tire's resistance to the generation of heat and its  
ability to dissipate heat when tested under controlled conditions  
on a specified indoor laboratory test wheel. Sustained high  
temperature can cause the material of the tire to degenerate and  
reduce tire life, and excessive temperature can lead to sudden tire  
failure. The grade C corresponds to a level of performance which  
all passenger car tires must meet under the Federal Motor Vehicle  
Safety Standard No. 109. Grades B and A represent higher levels  
of performance on the laboratory test wheel than the minimum  
required by law.  
469  
   
uuChecking and Maintaining TiresuWear Indicators  
Wear Indicators  
The groove where the wear indicator is  
Example of a Wear  
Indicator mark  
located is 1/16 inch (1.6 mm) shallower than  
elsewhere on the tire. If the tread has worn so  
that the indicator is exposed, replace the tire.  
Worn out tires have poor traction on wet  
roads.  
Tire Service Life  
The life of your tires is dependent on many factors, including driving habits, road  
conditions, vehicle loading, inflation pressure, maintenance history, speed, and  
environmental conditions (even when the tires are not in use).  
In addition to regular inspections and inflation pressure maintenance, it is  
recommended that you have annual inspections performed once the tires reach five  
years old. All tires, including the spare, should be removed from service after 10  
years from the date of manufacture, regardless of their condition or state of wear.  
470  
 
uuChecking and Maintaining TiresuTire and Wheel Replacement  
1Tire and Wheel Replacement  
Tire and Wheel Replacement  
Replace your tires with radials of the same size, load range, speed rating, and  
maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires of a  
different size or construction can cause the ABS, vehicle stability assist (VSA®), hill  
start assist, and the AWD* system to work incorrectly.  
3
WARNING  
Installing improper tires on your vehicle can  
affect handling and stability. This can cause  
a crash in which you can be seriously hurt or  
killed.  
It is best to replace all four tires at the same time. If that isn’t possible, replace the  
front or rear tires in pairs.  
Always use the size and type of tires  
recommended in this owner’s manual.  
Make sure that the wheel’s specifications match those of the original wheels.  
If you replace a wheel, only use TPMS specified wheels approved for your vehicle.  
* Not available on all models  
471  
 
uuChecking and Maintaining TiresuTire Rotation  
Tire Rotation  
Rotating tires according to the maintenance messages on the information display*/  
multi-information display*/intelligent multi-information display (i-MID) helps to  
distribute wear more evenly and increase tire life.  
1Tire Rotation  
Tires with directional tread patterns should only be  
rotated front to back (not from one side to the other).  
Directional tires should be mounted with the rotation  
indication mark facing forward, as shown below.  
■
Tires without rotation marks  
Rotate the tires as shown here.  
Front  
Front  
Direction Mark  
■
Tires with rotation marks  
Rotate the tires as shown here.  
Front  
* Not available on all models  
472  
 
uuChecking and Maintaining TiresuWinter Tires  
Winter Tires  
If driving on snowy or frozen roads, mount all season marked “M+S” tires, snow  
tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles  
when driving.  
1Winter Tires  
3
WARNING  
Using the wrong chains, or not properly  
installing chains, can damage the brake  
lines and cause a crash in which you can be  
seriously injured or killed.  
Be particularly careful when operating the steering wheel or brakes to prevent  
skidding.  
Use tire chains, snow tires, or all season tires when necessary or according to the law.  
When mounting, refer to the following points.  
Follow all instructions in this owner's  
manual regarding the selection and use of  
tire chains.  
For winter tires:  
• Select the size and load ranges that are the same as the original tires.  
• Mount the tires to all four wheels.  
For tire chains:  
• Install them on the front tires only.  
• Because your vehicle has limited tire clearance, we strongly recommend using the  
chains listed below:  
NOTICE  
Traction devices that are the wrong size or improperly  
installed can damage your vehicle's brake lines,  
suspension, body, and wheels. Stop driving if they are  
hitting any part of the vehicle.  
When tire chains are mounted, follow the chain  
manufacturer's instructions regarding vehicle  
operational limits.  
Models with 215/70R16 tires  
Cable-type: SCC Radial Chain SC1042  
Models with 225/65R17 or P225/60R18 99H tires  
Cable-type: SCC Radial Chain TC2111MM  
If your vehicle is equipped with summer tires, be  
aware that these tires are not designed for winter  
driving conditions. For more information, contact a  
dealer.  
• Follow the chain manufacturer's instruction when installing. Mount them as  
tightly as you can.  
• Check that the chains do not touch the brake lines or suspension.  
• Drive slowly.  
473  
 
Battery  
Checking the Battery  
Check the battery condition monthly and check the terminals for corrosion.  
1Battery  
3
WARNING  
If your vehicle's battery is disconnected or goes dead:  
• The audio system is disabled.  
The battery gives off explosive hydrogen  
gas during normal operation.  
2 Reactivating the audio system P. 210  
• The clock resets.  
2 Clock P. 128  
• The navigation system* is disabled.  
A spark or flame can cause the battery to  
explode with enough force to kill or  
seriously hurt you.  
2 Refer to the navigation system manual  
When conducting any battery  
maintenance, wear protective clothing and  
a face shield, or have a skilled technician do  
it.  
Charging the Battery  
Disconnect both battery cables to prevent damaging your vehicle's electrical system.  
Always disconnect the negative (–) cable first, and reconnect it last.  
WARNING: Battery post, terminals,  
and related accessories contain lead  
and lead compounds.  
Wash your hands after handling.  
When you find corrosion, clean the battery terminals  
by applying a baking powder and water solution.  
Clean the terminals with a damp towel. Cloth/towel  
dry the battery. Coat the terminals with grease to  
help prevent future corrosion.  
When replacing the battery, the replacement must be  
of the same specifications.  
Please consult a dealer for more information.  
* Not available on all models  
474  
 
Remote Transmitter Care  
Replacing the Button Battery  
If the indicator does not come on when the button is pressed, replace the battery.  
1Replacing the Button Battery  
NOTICE  
Master Keys with Remote Transmitter*  
An improperly disposed of battery can damage the  
environment. Always confirm local regulations for  
battery disposal.  
■
Battery type: CR1620  
Screw  
1. Unscrew the cover with a small Phillips-  
head screwdriver.  
Replacement batteries are commercially available or  
at a dealer.  
2. Open the remote transmitter.  
u Wrap the small flat-tip screwdriver with a  
cloth to prevent scratching the  
transmitter.  
Battery  
3. Remove the button battery with the small  
flat-tip screwdriver.  
4. Make sure to replace the battery with the  
correct polarity.  
* Not available on all models  
Continued  
475  
 
uuRemote Transmitter CareuReplacing the Button Battery  
Smart Entry Remote*  
■
Battery type: CR2032  
1. Remove the built-in key.  
2. Remove the upper half of the cover by  
carefully prying on the edge with a coin.  
u Remove carefully to avoid losing the  
buttons.  
Battery  
u Wrap a coin with a cloth to prevent  
scratching the smart entry remote.  
3. Make sure to replace the battery with the  
correct polarity.  
* Not available on all models  
476  
*
*
Heating and Cooling System /Climate Control System Maintenance  
Dust and Pollen Filter  
The heating and cooling system*/climate control system* is equipped with a dust  
and pollen filter that collects pollen, dust, and other debris in the air. The  
Maintenance MinderTM messages will let you know when to replace the filter.  
1Dust and Pollen Filter  
If the airflow from the heating and cooling system*/  
climate control system* deteriorates noticeably, and  
the windows fog up easily, the filter may need to be  
replaced. Please contact a dealer for replacement.  
We recommend that you replace the dust and pollen filter sooner when using your  
vehicle in areas with high concentrations of dust.  
* Not available on all models  
477  
 
Cleaning  
Interior Care  
Use a damp cloth with a mixture of mild detergent and warm water to remove dirt.  
Use a clean cloth to remove detergent residue.  
1Interior Care  
Do not spill liquids inside the vehicle.  
Electrical devices and systems may malfunction if  
liquids are splashed on them.  
Cleaning Seat Belts  
■
Do not use silicone based sprays on electrical devices  
such as audio devices and switches.  
Doing so may cause the items to malfunction or a fire  
inside the vehicle.  
Use a soft brush with a mixture of mild soap and warm water to clean the seat belts.  
Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth.  
If a silicone based spray is inadvertently used on  
electrical devices, consult a dealer.  
Opening  
Depending on their composition, chemicals and  
liquid aromatics may cause discoloration, wrinkles,  
and cracking to resin-based parts and textiles.  
Do not use alkali solvents or organic solvents such as  
benzene or gasoline.  
After using chemicals, make sure to gently wipe them  
away using a dry cloth.  
Do not place used cloths on top of resin based parts  
or textiles for long periods of time without washing.  
478  
 
uuCleaninguInterior Care  
1Floor Mats  
Floor Mats  
■
If you use any floor mats that were not originally  
provided with your vehicle, make sure they are  
designed for your specific vehicle, fit correctly, and  
are securely anchored by the floor anchors.  
Position the rear seat floor mats properly. If they are  
not properly positioned, the floor mats can interfere  
with the front seat functions.  
The driver’s floor mat hooks over the floor  
anchors, which keep the mat from sliding  
forward. To remove a mat for cleaning, turn  
the anchor knobs to the unlock position.  
When reinstalling the mat after cleaning, turn  
the knobs to the lock position.  
Unlock  
Lock  
Do not put additional floor mats on top of  
the anchored mat.  
Maintaining Genuine Leather*  
■
Vacuum dirt and dust from the leather frequently. Pay close attention to the pleats  
and seams. Clean the leather with a soft cloth dampened with a 90% water and  
10% neutral soap solution. Then buff it with a clean, dry cloth. Remove any dust or  
dirt on leather surfaces immediately.  
* Not available on all models  
479  
 
uuCleaninguExterior Care  
Exterior Care  
Dust off the vehicle body after you drive.  
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a  
painted surface can result in body rust. If you find a scratch, promptly repair it.  
Washing the Vehicle  
1Washing the Vehicle  
■
Do not spray water into the air intake vents. It can  
cause a malfunction.  
Wash the vehicle regularly. Wash more frequently when driving in the following  
conditions:  
• If driving on roads with road salt.  
• If driving in coastal areas.  
• If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.  
Using an Automated Car Wash  
■
• Remove the audio antenna.  
2 Audio Antenna P. 209  
• Fold in the door mirrors.  
• Turn off the automatic intermittent wipers*.  
Make sure to follow the instructions indicated on the automated car wash.  
Air Intake Vents  
Using High Pressure Cleaners  
■
• Keep sufficient distance between the cleaning nozzle and the vehicle body.  
• Take particular care around the windows. Standing too close may cause water to  
enter the vehicle interior.  
• Do not spray high pressure water directly into the engine compartment. Instead,  
use low pressure water and a mild detergent.  
* Not available on all models  
480  
 
uuCleaninguExterior Care  
1Applying Wax  
Applying Wax  
■
NOTICE  
A good coat of automotive body wax helps protect your vehicle’s paint from the  
elements. Wax will wear off over time and expose your vehicle’s paint to the  
elements, so reapply as necessary.  
Chemical solvents and strong cleaners can damage  
the paint, metal, and plastic on your vehicle. Wipe  
away spills immediately.  
Maintaining the Bumpers and Other Resin Coated Parts  
1Maintaining the Bumpers and Other Resin Coated Parts  
■
Ask a dealer about the correct coating material when  
you want to repair the painted surface of the parts  
made of resin.  
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they  
may be stained or the coating may peel. Promptly wipe it away using a soft cloth and  
clean water.  
1Cleaning the Window  
Cleaning the Window  
■
Wires are mounted to the inside of the rear window.  
Wipe along the same direction as the wires with a  
soft cloth so as not to damage them.  
Wipe using a glass cleaner.  
Maintaining Aluminum Wheels*  
■
Aluminum is susceptible to deterioration caused by salt and other road  
contaminants. Use a sponge and mild detergent to wipe away promptly.  
Be careful not to use harsh chemicals (including some commercial wheel cleaners) or  
a stiff brush. They can damage the clear coat of the aluminum alloy wheels that  
helps keep the aluminum from corroding and tarnishing.  
* Not available on all models  
Continued  
481  
     
uuCleaninguExterior Care  
Fogged Exterior Light Lenses  
■
The inside lenses of exterior lights (headlights, brake lights, etc.) may fog temporarily  
if you have driven in the rain, or after the vehicle has been run through a car wash.  
Dew condensation also may build up inside the lenses when there is a significant  
enough difference between the ambient and inside lens temperatures (similar to  
vehicle windows fogging up in rainy conditions). These conditions are natural  
processes, not structural design problems in the exterior lights.  
Lens design characteristics may result in moisture developing on the light lens frame  
surfaces. This also is not a malfunction.  
However, if you see large amounts water accumulation, or large water drops  
building up inside the lenses, have your vehicle inspected by a dealer.  
482  

Related Topics

Before Performing Maintenance
Maintenance Under the Hood
Remote Transmitter Care
Cleaning