Get Controls -> Security System Guide for Honda CR-V SUV Fifth Generation (2016-2021)

Security System

Immobilizer System

The immobilizer system prevents a key that has not been pre-registered from

starting the power system. Each key contains electronic transmitters that use

electronic signals to verify the key.

1Immobilizer System

NOTICE

Leaving the key in the vehicle can result in theft or

accidental movement of the vehicle.

Always take the key with you whenever you leave the

vehicle unattended.

Pay attention to the following when pressing the POWER button:

• Do not allow objects that emit strong radio waves near the POWER button.

• Make sure the key is not covered by or touching a metal object.

• Do not bring a key from another vehicle’s immobilizer system near the POWER

button.

Do not alter the system or add other devices to it.

Doing so may damage the system and make your

vehicle inoperable.

• Do not put the key near magnetic items. Electronic device, such as televisions and

audio systems emit strong magnetic fields. Note that even a key chain can

become magnetic.

Security System Alarm^*

The security system alarm activates when the tailgate, hood or doors are forcibly

opened. The alarm does not activate if the tailgate or doors are opened with the key,

remote transmitter or smart entry system.

1Security System Alarm^*

The security system alarm continues for a maximum

of two minutes until the security system alarm

deactivates.

However, the alarm activates if a door is opened with the key and then the hood is

opened before the power mode is set to ON.

■

When the security system alarm activates

The horn sounds intermittently, and some exterior lights flash.

* Not available on all models

Continued

175

uuSecurity SystemuSecurity System Alarm^*

1Security System Alarm^*

■

To deactivate the security system alarm

Unlock the vehicle using the key, remote transmitter or smart entry system, or turn

the power mode is set to ON. The system, along with the horn and flashing lights, is

deactivated.

Do not set the security system alarm when someone

is in the vehicle or a window is open. The system can

accidentally activate when:

•

Unlocking the door with the lock tab.

Opening the hood with the hood release handle.

■

Setting the security system alarm

The security system alarm automatically sets when the following conditions have

been met:

If the 12-volt battery goes dead after you have set the

security system alarm, the security alarm may go off

once the 12-volt battery is recharged or replaced.

If this occurs, deactivate the security system alarm by

unlocking a door using the key, remote transmitter,

or smart entry system.

• The power mode is set to VEHICLE OFF (LOCK).

• The hood and tailgate are closed.

• All doors and tailgate are locked from outside with the key, remote transmitter,

or smart entry system.

Do not alter the system or add other devices to it.

Doing so may damage the system and make your

vehicle inoperable.

■

When the security system alarm sets

The security system alarm indicator in the instrument panel blinks and the blinking

interval changes after about 15 seconds.

■

To cancel the security system alarm

The security system alarm is canceled when the vehicle is unlocked using the remote

transmitter or smart entry system, or when the power mode is set to ON. The

security system alarm indicator goes off at the same time.

* Not available on all models

176

uuSecurity SystemuSecurity System Alarm^*

Panic Mode

■

The panic button on the remote

transmitter

If you press the panic button for

approximately one second, the following will

occur for about 30 seconds:

• The horn sounds.

Panic

Button

• Some exterior lights flash.

■

Canceling panic mode

• Press any button on the remote transmitter.

• Set the power mode to ON.

177

Opening and Closing the Windows

Opening/Closing the Power Windows

The power windows can be opened and closed when the power mode is in ON,

using the switches on the doors. The driver’s side switches can be used to open and

close all the windows.

1Opening/Closing the Power Windows

3

WARNING

Closing a power window on someone’s

hands or fingers can cause serious injury.

The power window lock button on the driver’s side must be switched off (not

pushed in, indicator off) to open and close the windows from anywhere other than

the driver’s seat.

Make sure your passengers are away from

the windows before closing them.

When the power window lock button is switched on (pushed in, indicator on), you

can only operate the driver’s window. Turn the power window lock button on if a

child is in the vehicle.

The power windows can be operated for up to 10

minutes after you set the power mode to VEHICLE

OFF.

Opening either front door cancels this function.

178

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

1Opening/Closing the Power Windows

Opening/Closing the Windows with Auto-Open/Close

■

Auto Reverse

If a power window senses resistance when closing

automatically, it stops closing and reverse direction.

Function

■

Manual operation

Auto-open/close function on driver’s

window

To open: Push the switch down lightly, and

hold it until the desired position is reached.

To close: Pull the switch up lightly, and hold it

until the desired position is reached.

The driver’s window auto reverse function is disabled

when you continuously pull up the switch.

ON

OFF

Power Window

Lock Button

The auto reverse function stops sensing when the

window is almost closed to ensure that it fully closes.

■

Automatic operation

Indicator

To open: Push the switch down firmly.

To close: Pull the switch up firmly.

Driver’s

Window

Switch

The window opens or closes completely. To

stop the window at any time, push or pull the

switch briefly.

Auto-open/close function on front

windows

ON

OFF

Power Window

Lock Button

Indicator

Driver’s

Window

Switch

Passenger’s

Window

Switch

Continued

179

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

Opening/Closing Windows without Auto-Open/Close Function

■

To open: Push the switch down.

To close: Pull the switch up.

Close

Release the switch when the window reaches

the desired position.

Open

1Opening the Windows with the Remote

Opening the Windows with the Remote

■

Models with moonroof

To open: Press the unlock button, and then

within 10 seconds, press it again and keep it

pressed. If the windows stop midway, repeat

the procedure.

If you open the windows with the remote, the

moonroof will open automatically along with them.

Unlock

Button

180

uuOpening and Closing the WindowsuOpening/Closing the Power Windows

1Opening/Closing the Windows with the Key

Opening/Closing the Windows with the Key

■

Models with moonroof

To open: Unlock the driver’s door with the

key. Within 10 seconds of returning the key to

If you open/close the windows with the key ,the

moonroof will close automatically along with them.

the central position, turn the key in the unlock

direction and hold it there.

Close

To close: Lock the driver’s door with the key.

Within 10 seconds of returning the key to the

central position, turn the key in the lock

direction and hold it there.

Open

Release the key to stop the windows at the

desired position. If you want further

adjustment, repeat the same operation.

181

Moonroof^*

Opening/Closing the Moonroof

You can operate the moonroof when the power mode is in ON. Use the switch in

the front of the ceiling to open and close the moonroof.

1Using the Moonroof Switch

3

WARNING

Opening or closing the moonroof on

someone’s hands or fingers can cause

serious injury.

Using the Moonroof Switch

■

Automatic operation

Open

To open: Pull the switch back firmly.

To close: Push the switch forward firmly.

Make sure all hands and fingers are clear of

the moonroof before opening or closing it.

The moonroof automatically opens or closes

all the way. To stop the moonroof midway,

pull or push the switch briefly.

NOTICE

Tilt

Opening the moonroof in below freezing

temperature or when it is covered with snow or ice

can damage the moonroof panel or motor.

Close

■

Manual operation

To open: Pull the switch back lightly, and

hold it until the desired position is reached.

To close: Push the switch forward lightly, and

hold it until the desired position is reached.

The moonroof can be operated for up to 10 minutes

after you set the power mode to VEHICLE OFF

(LOCK).

Opening either front door cancels this function.

When resistance is detected, the auto reverse

function causes the moonroof to change directions,

then stop. Auto reverse stops sensing when the

moonroof is almost closed to ensure that it fully

closes.

■

Tilting the moonroof up

To tilt: Push on the center of the moonroof

switch.

To close: Push the switch forward firmly, then

release.

You can use the remote transmitter or the key to

operate the moonroof.

2

Opening the Windows with the Remote P. 180

Opening/Closing the Windows with the Key

P. 181

2

* Not available on all models

182

Controls -> Security System for Your Honda CR-V SUV Fifth Generation (2016-2021)

Related Topics

Controls