Compass*
1Compass*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass operation can be affected under the
following conditions:
• Driving near power lines or stations
Compass Calibration
• Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
• When accessories such as antennas and roof racks
are mounted by magnets
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Set the power mode to ON.
2. Press and hold the
(day/night) button
1Compass Calibration
until the display shows the compass setting
menu.
Calibrate the compass in an open area.
3. Rotate
to select Calibration, then press
While setting the compass:
.
• The
screen.
(Back) button returns to the previous
Compass Setting Menu Items
4. When the display changes to Push CAL
Start, press
.
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
* Not available on all models
456
English 
