Get Features -> HomeLink Universal Transceiver Guide for Honda CR-V SUV 2023

HomeLink® Universal Transceiver^*

1HomeLink® Universal Transceiver^*

The HomeLink® Universal Transceiver can be programmed to operate up to three

remote controlled devices around your home, such as garage doors, lighting, or

home security systems.

Before programming HomeLink to operate a garage

door opener, confirm that the opener has an external

entrapment protection system, such as an “electronic

eye,” or other safety and reverse stop features. If it

does not, HomeLink may not be able to operate it.

Important Safety Precautions

■

Refer to the safety information that came with your garage door opener to test that

the safety features are functioning properly. If you do not have the safety

information, contact the manufacturer.

NOTE:

Some LED lightbulbs installed in the garage door

opener can interfere with the training and consistent

operation of your HomeLink device. Please consider

use of Low RF interference bulbs in your garage door

opener.

Before programming HomeLink, make sure that people and objects are out of the

way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage door’s path.

* Not available on all models

395

uuHomeLink® Universal Transceiver^*uTraining HomeLink

Training HomeLink

If it is necessary to erase a previously entered

learned code:

Red Indicator

• Press and hold the two outside buttons for

about 20 seconds, until the red indicator

blinks. Release the buttons, and proceed to

step 1.

• If you are training the second or third

button, go directly to step 1.

The instructions on the next page should work for most gate or garage openers, but

may not work for all. For detailed instructions about your specific remote opener,

visit http://www.homelink.com or call (800)355-3515.

396

uuHomeLink® Universal Transceiver^*uTraining HomeLink

1Training HomeLink

Training a Button

■

Retraining a Button

1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the

If you want to retrain a programmed button for a

new device, you do not have to erase all button

memory. You can replace the existing memory code

using this procedure:

HomeLink button you want to program.

Press and hold the desired HomeLink button. Hold the button on the remote

transmitter. Does the HomeLink indicator (LED) change from slowly blinking to

constantly on or rapidly blinking? The process should take less than 60 seconds.

Press and hold the desired HomeLink button

until the HomeLink indicator begins to blink.

YES

Indicator remains on for about 25 secs.

Press and release the HomeLink button. Press

and release the button on the remote every 2

secs.

Does the HomeLink indicator (LED) change from

slowly blinking to constantly on or rapidly

blinking? The process should take less than 60

seconds.

Press and hold the

programmed HomeLink

button for about a sec.

Does the device (garage

door opener) work?

Quickly release the HomeLink button and follow

steps 1 - 3 under “Training a Button.” You do not

need to press and release the HomeLink button

again in step 2.

YES

Erasing Codes

YES

To erase all the codes, press and hold the two outside

buttons until the HomeLink indicator begins to blink

(about 10 to 20 secs). You should erase all codes

before selling the vehicle.

Press and hold the HomeLink button again.

Training

Complete

HomeLink indicator rapidly blinks.

HomeLink LED is

constantly on.

If you have any problems, see the device’s

instructions, visit www.homelink.com, or call

HomeLink at (800) 355-3515.

The remote has a rolling code. Press the

“learn” button on the remote-controlled

device (e.g. garage door opener).

Press and hold the HomeLink

button again.

The remote-controlled device

should operate.

HomeLink® is a registered trademark of Gentex

Corporation.

Within 30 secs, press and hold the

programmed HomeLink button for 2 secs.

Training Complete

397

Features -> HomeLink Universal Transceiver for Your Honda CR-V SUV 2023

Popular Manuals