Power System Won’t Start
Checking the Procedure
When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2 If the 12-Volt Battery Is Dead P. 647
Checklist
Condition
The Temperature Is Too Cold For Vehicle To Operate
message appears.
The To Start, Hold Remote Near Start Button message
appears.
2 Driver Information Interface Warning and
Information Messages P. 109
Check if the related
indicator or driver
information interface
messages come on.
2 If the Keyless Remote Battery is Weak
P. 645
uMake sure the keyless remote is in its operating range.
2 POWER Button Operating Range P. 186
The POWER SYSTEM indicator comes on.
The transmission system indicator blinks and Transmission
Problem. Apply Parking Brake When Parked message
appears.
Have your vehicle checked by a dealer.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 658
Check the brightness The interior lights are dim or do not come on at all.
Have the 12-volt battery checked by a dealer.
of the interior lights.
The interior lights come on normally.
Check all fuses, or have your vehicle checked by
a dealer.
2 Inspecting and Changing Fuses P. 662
Check the shift
position.
The transmission is not in (P.
Put the transmission into (P.
Check the
immobilizer system
indicator.
When the immobilizer system indicator is blinking, the power
system cannot be turned on.
2 Immobilizer System Indicator P. 101
644
