Get Maintenance -> Checking and Maintaining Wiper Blades Guide for Honda CR-V SUV 2023

Checking and Maintaining Wiper Blades

Checking Wiper Blades

If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and

the hard surfaces of the blade may scratch the window glass.

Changing the Front Wiper Blade Rubber

1Changing the Front Wiper Blade Rubber

1. Set the power mode to VEHICLE OFF.

2. While holding the wiper switch in the

MIST position, set the power mode to ON,

then to VEHICLE OFF.

NOTICE

Avoid dropping the wiper arm onto the windshield, it

may damage the wiper arm and/or the windshield.

u Both wiper arms are set to the

maintenance position as shown in the

image.

3. Lift the driver side wiper arm first, then the

passenger side.

Continued

601

uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber

4. Press up on and hold the tab, then slide

the holder off the wiper arm.

Tab

5. Pull the end of the wiper blade in the

direction of the arrow in the image until it

is out of the holder’s end cap.

Wiper

Blade

End Cap At

The Bottom

6. Pull the wiper blade in the opposite

Wiper Blade

direction to slide it out of the holder.

Holder

602

uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber

7. Slide the new wiper blade onto the holder

from the bottom end.

u The tab on the holder should fit in the

indent of the wiper blade.

Wiper

Blade

8. Slide the holder onto the wiper arm, then

push down the lock tab.

9. Lower the passenger side wiper arm first,

then the driver side.

10. Set the power mode to ON and hold the

wiper switch in the MIST position until

both wiper arms return to the standard

position.

Holder

Cap

603

uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber

Changing the Rear Wiper Blade Rubber

1. Raise the wiper arm off.

2. Pivot the bottom end of the holder up until

it comes off from the wiper arm.

1Changing the Rear Wiper Blade Rubber

Wiper Arm

NOTICE

Avoid dropping the wiper arm, it may damage the

rear window.

3. Slide the blade out of the holder.

Wiper Blade

4. Remove the retainers from wiper blade and

mount to a new rubber blade.

Retainer

604

uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber

5. Slide the new wiper blade onto the holder.

u Make sure it is engaged correctly, then

install the wiper blade assembly onto the

wiper arm.

Holder

605

Maintenance -> Checking and Maintaining Wiper Blades for Your Honda CR-V SUV 2023

Popular Manuals