Quick Reference Guide -> What to Do If for Your Honda CR-V SUV 2023

What to Do If  
Why does the brake pedal  
pulsate slightly when  
applying the brakes?  
This can occur when the ABS activates and does not indicate a  
problem. Apply firm, steady pressure on the brake pedal. Never  
pump the brake pedal.  
2 Anti-lock Brake System (ABS) (P557)  
The rear door cannot be  
opened from inside the  
vehicle. Why?  
Check if the childproof lock is in  
the lock position. If so, open the  
rear door with the outside door  
handle.  
To cancel this function, slide the  
lever up to the unlock position.  
Why do the doors lock  
after I unlocked the doors?  
If you do not open the doors within 30 seconds, the doors are  
relocked automatically for security.  
Why does the beeper  
sound when I open the  
driver’s door?  
The beeper sounds when:  
The exterior lights are left on.  
The power mode is in ACCESSORY.  
38  
Why does a beeper sound  
when I walk away from the  
vehicle after I close the  
door?  
The beeper sounds if you move outside the walk away auto lock  
operating range before the door completely closes.  
2 Locking the doors and tailgate (Walk away auto lock®) (P158)  
Why does the beeper  
sound when I start driving?  
The beeper sounds when the driver and/or front passenger are  
not wearing their seat belts.  
Pressing the electric  
parking brake switch does  
not release the parking  
brake. Why?  
Press the electric parking brake switch with the brake pedal  
depressed.  
Depressing the accelerator  
pedal does not release the  
parking brake  
Fasten the driver’s seat belt.  
Check if the transmission is in (P or (N. If so, select any other  
position.  
automatically. Why?  
Why do I hear a screeching  
sound when I apply the  
brake pedal?  
The brake pads may need to be replaced. Have your vehicle  
inspected by a dealer.  
39  
I'm seeing an amber  
indicator of a tire with an  
exclamation point. What is  
that?  
The Tire Pressure Monitoring System (TPMS) needs attention. If  
you recently inflated or changed a tire, you have to recalibrate  
the system.  
2 Tire Pressure Monitoring System (TPMS) (P493)  
Why does the shift position  
automatically change to (P  
when I open the driver’s  
door to check for parking  
space lines when  
Fasten the driver’s seat belt.  
Close the driver’s door and manually change the shift  
position.  
2 When opening the driver’s door (P480)  
reversing?  
40