Get Controls -> Climate Control System Guide for Honda Hr-V SUV 2020

Climate Control System^*

Using Automatic Climate Control

1Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.

The system also selects the proper mix of heated or cooled air that raises or lowers

the interior temperature to your preference as quickly as possible.

If any icons are selected while using the climate

control system in auto, the function of the icon that

was selected will take priority.

The AUTO indicator will go off, but functions

unrelated to the icon that was selected will be

controlled automatically.

Models without SYNC icon

To prevent cold air from blowing in from outside, the

fan may not start immediately when the AUTO icon

is selected.

Dashboard

vents

Dashboard Floor vents Floor and

and floor

vents

defroster

vents

If the interior is very warm, you can cool it down

more rapidly by partially opening the windows,

turning the system on auto, and setting the

Temperature Control

Icons

Mode Control Icon

temperature to low. Change the fresh air mode to

recirculation mode until the temperature cools down.

Fan Control Icons

When you set the temperature to the lower or upper

limit, Lo or Hi is displayed.

You can raise or lower the temperature or fan speed

setting flicking either control icon.

(Windshield Defroster)

Icon

AUTO Icon

(On/Off) Icon

A/C (Air Conditioning) Icon

(Fresh Air) Icon

(Recirculation) Icon

Use the system when the engine is running.

1. Select the AUTO icon.

2. Adjust the interior temperature using the temperature control icons.

3. Select the icon to cancel.

* Not available on all models

216

uuClimate Control System^*uUsing Automatic Climate Control

1Using Automatic Climate Control

Models with SYNC icon

Selecting the

icon switches the climate control

system between on and off. When turned on, the

system returns to your last selection.

While ECON mode is active, the system may have

reduced performance.

Dashboard

vents

Dashboard Floor vents Floor and

and floor

vents

defroster

vents

Driver Side

Temperature

Control Icons

Mode Control Icon

Passenger Side

Temperature

Control Icons

(Windshield Defroster)

Icon

AUTO Icon

(On/Off) Icon

SYNC Icon

(Recirculation) Icon

A/C (Air Conditioning) Icon

Use the system when the engine is running.

1. Select the AUTO icon.

2. Adjust the interior temperature using the driver side temperature control icons.

3. Select the icon to cancel.

Continued

217

uuClimate Control System^*uUsing Automatic Climate Control

■ Switching between the recirculation and fresh air modes

Models without SYNC icon

Select the

depending on environmental conditions.

Recirculation mode (indicator on): Recirculates air from the vehicle’s interior

through the system.

(recirculation) or

(fresh air) icon to switch the mode

Fresh air mode (indicator on): Maintains outside ventilation. Keep the system

in fresh air mode in normal situations.

Models with SYNC icon

Select the

(recirculation) icon to switch the mode depending on

environmental conditions.

Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through

the system.

Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in

fresh air mode in normal situations.

218

uuClimate Control System^*uUsing Automatic Climate Control

1Defrosting the Windshield and Windows

Defrosting the Windshield and Windows

■

For your safety, make sure you have a clear view

through all the windows before driving.

Select the

icon to turn the air conditioning

Models without SYNC icon

system on and automatically switch the

system to fresh air mode.

Do not set the temperature near the upper or lower

limit.

When cold air hits the windshield, the outside of the

windshield may fog up.

Select the

icon again to turn off, the

system returns to the previous settings.

If the side windows fog up, adjust the vents so that

the air hits the side windows.

Models with SYNC icon

Continued

219

uuClimate Control System^*uUsing Automatic Climate Control

■ To rapidly defrost the windows

1To rapidly defrost the windows

Models without SYNC icon

1. Select the

2. Select the

icon.

After defrosting the windows, switch over to fresh air

mode. If you keep the system in recirculation mode,

the windows may fog up from humidity. This

impedes visibility.

Models with SYNC icon

220

uuClimate Control System^*uUsing Automatic Climate Control

1Turning On and Off the Touch Screen Beep

Turning On and Off the Touch Screen Beep

■

If you touch any other icons during this procedure,

You hear the beep when operating the climate control system on the touch screen.

This can be turned on and off.

the setting may fail. In this case, once you turn the

ignition switch to OFF (0^*1, then follow this

procedure again.

To turn off the beep:

1. Turn the ignition switch to ON (w^*1.

Models without SYNC icon

2. Touch the

icon five times while pressing and holding

the

3. Release the

and OF is displayed.

of the temperature control

, after -- blinks five times

Models with SYNC icon

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an

ignition switch.

Continued

221

uuClimate Control System^*uUsing Automatic Climate Control

To turn on the beep:

1. Turn the ignition switch to ON (w^*1.

Models without SYNC icon

2. Touch the

icon five times while pressing and holding

the

3. Release the

and -- is displayed.

of the temperature control

, after OF blinks five times

Models with SYNC icon

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an

ignition switch.

222

uuClimate Control System^*uUsing Automatic Climate Control

1Touch Panel Sensitivity Setting

Touch Panel Sensitivity Setting

■

If you touch any other icons during this procedure,

You can set the level of sensitivity of the touch control panel to high, normal, or low.

the setting may fail. In this case, once you turn the

ignition switch to LOCK (0^*1, then follow this

procedure again.

1. Turn the ignition switch to ON (w^*1.

Models without SYNC icon

2. Press and hold the AUTO icon, then press

Temperature display area

any of the following icons five times to set

the level.

•

: High (Hi)^*2.

u Previous setting blinks five times and Hi

will be displayed in the temperature

display area.

: Normal (--)

u Previous setting blinks five times and --

will be displayed in the temperature

display area.

: Low (Lo)

Models with SYNC icon

u Previous setting blinks five times and Lo

will be displayed in the temperature

display area.

Temperature display area

3. Release the AUTO icon.

*1: Models with the smart entry system have an

ENGINE START/STOP button instead of an ignition

switch.

*2: Default setting

Continued

223

uuClimate Control System^*uUsing Automatic Climate Control

1Synchronization Mode^*

Synchronization Mode^*

■

When the system is in dual mode, the driver side

temperature and the passenger side temperature can

be set separately.

Driver Side

Temperature

Control Icon

Passenger Side

Temperature

Control Icon

SYNC Icon

You can set the temperature synchronously for the driver side and the passenger

side in synchronization mode.

1. Select the SYNC icon.

u The system switches to synchronization mode.

2. Adjust the temperature using the driver’s side temperature control icon.

Select the SYNC icon to return to dual mode.

* Not available on all models

224

uuClimate Control System^*uAutomatic Climate Control Sensors

Automatic Climate Control Sensors

The automatic climate control system is

equipped with sensors. Do not cover or spill

any liquid on them.

Sensor

225

Controls -> Climate Control System for Your Honda Hr-V SUV 2020

Popular Manuals