Controls -> Operating the Switches Around the Steering Wheel for Your Honda Hr-V SUV 2020

Operating the Switches Around the Steering Wheel  
Models without smart entry system  
Ignition Switch  
1Ignition Switch  
You cannot take the key out unless the shift lever is  
in (P.  
(0 LOCK: Insert and remove the key in this  
position.  
If you open the driver’s door when the key is in LOCK  
(0 or ACCESSORY (q, a warning buzzer will sound  
to remind you to take the key out.  
(q ACCESSORY: Operate the audio system and  
other accessories in this position.  
Models with multi-information display  
When the warning buzzer sounds, the following  
messages appear on the multi-information display:  
(w ON: This is the position when driving.  
In LOCK (0: the symbol  
Key From Ignition  
In ACCESSORY (q: the symbol  
with an Remove  
(e START: This position is for starting the engine.  
The switch returns to ON (w when you let go of  
the key.  
with a  
Return Ignition Switch To Lock (0) Position  
If the key won’t turn from LOCK (0 to ACCESSORY  
(q, turn the key while moving the steering wheel left  
and right. The steering wheel will unlock, allowing  
the key to turn.  
165  
 
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
Models with smart entry system  
ENGINE START/STOP Button  
1ENGINE START/STOP Button  
ENGINE START/STOP Button Operating Range  
You can start the engine when the smart entry  
remote is inside the vehicle.  
Changing the Power Mode  
Continuously Variable Transmission  
Operating Range  
VEHICLE OFF (LOCK)  
The button is off.  
The steering wheel is locked*1.  
The power to all electrical  
components is turned off.  
*2  
ACCESSORY  
The button blinks (in red).  
Operate the audio system and  
other accessories in this position.  
If the battery of the smart entry remote is getting  
low, the engine may not start when you push the  
ENGINE START/STOP button. If the engine does not  
start, refer to the following link.  
2 If the Smart Entry Remote Battery is Weak  
P. 592  
The engine may also run if the smart entry remote is  
close to the door or window, even if it is outside the  
vehicle.  
ON  
The button blinks (in red).  
All electrical components can be used.  
Without pressing  
the brake pedal  
ON mode:  
The ENGINE START/STOP button is on (in red), if the  
engine is running.  
Press the button without the  
transmission in (P.  
Press the button.  
Press the button with the  
transmission in (P.  
Put the transmission into (P*2.  
Do not leave the power mode in ACCESSORY or ON  
when you get out.  
*1: Canadian models  
*2: U.S. models  
166