Get Convenient features of your vehicle -> Lighting Guide for Hyundai Kona SUV 2020

Convenient features of your vehicle

LIGHTING

Daytime running light (DRL)

Exterior Lights

Lighting control

The Daytime Running Lights (DRL)

can make it easier for others to see

the front of your vehicle during the

day, especially after dawn and before

sunset.

To operate the lights, turn the knob at

the end of the control lever to one of

the following positions:

The DRL system will turn the dedi-

cated lamp OFF when :

• The headlamps are ON.

• The parking lamps are ON.

• The vehicle is turned off.

• The parking brake is engaged.

OOS047050N

AUTO headlamp position (if

equipped)

The parking lamp and headlamp will

be turned ON or OFF automatically

depending on the amount of daylight

as measured by the ambient light

sensor on the center dash.

OOS047404N

1. OFF position

2. AUTO headlamp position

3. Parking lamp position

4. Headlamp position

Even with the AUTO headlamp fea-

ture in operation, it is recommended

to manually turn ON the headlamps

when driving at night or in a fog, driv-

ing in the rain, or when you enter

dark areas, such as tunnels and

parking facilities.

3-90

NOTICE

• Do not cover or spill anything on

the sensor (1) located in front of

the instrument panel.

• Do not clean the sensor using a

window cleaner, the cleanser may

leave a light film which could

interfere with sensor operation.

3

• If your vehicle has window tint

or other types of metallic coat-

ing on the front windshield, the

AUTO headlamp system may not

work properly.

OOS047405N

OOS047406N

Headlamp position (

)

Parking lamp position (

)

The headlamp, parking lamp, license

plate lamp and instrument panel lamp

are turned ON.

The parking lamp, license plate lamp

and instrument panel lamp are turned

ON.

i

Information

The ignition switch must be in the ON

position to turn on the headlamp.

3-91

Convenient features of your vehicle

High beam operation

High Beam Assist (HBA)

(if equipped)

OOS047408N

To flash the high beam headlamp,

pull the lever towards you, then

release the lever. The high beams

will remain ON as long as you hold

the lever towards you.

OOS047407N

OOS047409N

To turn on the high beam headlamp,

push the lever away from you. The

lever will return to its original position.

The high beam indicator will light

when the headlamp high beams are

switched on.

To turn off the high beam headlamp,

pull the lever towards you. The low

beams will turn on.

The High Beam Assist (HBA) is a

system that automatically adjusts the

headlamp range (switches between

high beam and low beam) according

to the brightness of other vehicles

and road conditions.

Operating condition

1. Place the headlamp switch in the

AUTO position.

WARNING

2. Turn on the high beam by pushing

the lever away from you.

Do not use high beam when there

are other vehicles approaching

you. Using high beam could

obstruct the other driver's vision.

The High Beam Assist (HBA) (

indicator will illuminate.

)

3-92

3. The High Beam Assist (HBA) will When the High Beam Assist (HBA) is

turn on when vehicle speed is operating, the high beam switches to

above 25 mph (40 km/h).

• If the headlamp switch is pushed

away when the High Beam Assist - When the headlamp of an on-com-

(HBA) is operating, the High Beam

Assist (HBA) will turn off and the

high beam will be on continuously.

low beamif any of the following condi-

tions occur :

ing vehicle is detected.

- When the tail lamp of a vehicle in

front is detected.

3

• If the headlamp switch is pulled

towards you when the high beam

is off, the high beam will turn on

without the High Beam Assist

(HBA) canceled. When you let go

of the light switch, the lever will

move to the middle and the high

beam will turn off.

• If the headlamp switch is pulled

towards you when the high beam

is on by the High Beam Assist

(HBA), the low beam will be on

and the High Beam Assist (HBA)

will turn off.

- When the headlamp or tail lamp of

a motorcycle or a bicycle is detect-

ed.

- When the surrounding ambient light

is bright enough that high beams

are not required.

- When streetlights or other lights

are detected.

- When the headlamp switch is not in

the AUTO position.

OOS047127L

Warning light and message

When the High Beam Assist (HBA) is

not working properly, the Check High

Beam Assist warning message will

come on for a few second. After the

message disappears, the master

warning light (

) will illuminate.Take

- When the High Beam Assist (HBA)

is off.

- When vehicle speed is below 22mph

(35 km/h).

your vehicle to an authorized

HYUNDAI dealer and have the system

checked.

• If the headlamp switch is placed

to the headlamp ON position, the

High Beam Assist (HBA) will turn

off and the low beam will be on

continuously.

3-93

Convenient features of your vehicle

• When the vehicle is driven on

a narrow curved road or rough

road

• When the vehicle is driven on

an uphill road or downhill

road

• When only part of the vehicle in

front is visible on a crossroad

or curved road.

• When there is a traffic light,

reflecting sign, flashing sign or

mirror.

• When the front window is cov-

ered with foreign matters such

as ice, dust, fog, or is damaged.

3) When the forward visibility is

poor. Such examples may

include:

• When the headlamps of an on-

coming vehicle or a vehicle in

front is not detected due to

poor outside visibility (smog,

smoke, dust, fog, heavy rain,

snow, etc.).

WARNING

The system may not operate nor-

mally if any of the following con-

ditions should occur:

1) When the illumination from

an on-coming vehicle or a

vehicle in front is dim. Such

examples may include:

• When the headlamps of an on-

coming vehicle or the tail

lamps of a vehicle in front is

covered with dust, snow, or

water.

• When the headlamps on an on-

coming vehicle are OFF, but the

fog lamps are ON.

2) When the High Beam Assist

camera is adversely affected

by an external condition.

Such examples may include:

• When the vehicle's head-

lamps have been damaged or

not repaired properly.

• When the windshield visibility

is poor.

• When the road conditions are

bad such as being wet or cov-

ered with snow.

• When

a

vehicle suddenly

appears from a curve.

• When the vehicle is tilted from

a flat tire or being towed.

• When the Lane Keeping Assist

(LKA) system warning light

illuminates.

• When the light from the on-

coming or front vehicle is not

detected because of exhaust

fume, smoke, fog, snow, etc.

• When the vehicle headlamps

are not aimed properly.

3-94

Turn signals and lane change

signals

• Do not place objects on the

crash pad that reflect light

such as mirrors, white paper,

etc. The system may malfunc-

tion if sunlight is reflected.

• At times, the High Beam

Assist (HBA) may not work

properly. The system is for

your convenience only. It is

the responsibility of the driver

for safe driving practices and

always check the road condi-

tions for your safety.

WARNING

• Do not attempt to disassem-

ble the front view camera

without the assistance of an

authorized HYUNDAI dealer

technician.

If camera is

3

removed for any reason, the

system may need to be re-cal-

ibrated. Have the system

inspected by an authorized

HYUNDAI dealer.

• If the windshield of your vehi-

cle is replaced, most likely the

front view camera will need to

OOS047410N

• When the system does not

operate normally, change the

headlamp position manually

between the high beam and

low beam.

To signal a turn, push down on the

lever for a left turn or up for a right

turn in position (A).

If an indicator stays on and does not

flash or if it flashes abnormally, one of

the turn signal bulbs may be burned

out and will require replacement.

be re-calibrated.

If this

occurs, have your vehicle

inspected and have the sys-

tem re-calibrated by an

authorized HYUNDAI dealer.

• Be careful that water doesn’t

get into the High Beam Assist

(HBA) unit and do not remove

or damage related parts of the

High Beam Assist (HBA) sys-

tem.

3-95

Convenient features of your vehicle

Onetouch turn signal function

Front fog lamp (if equipped)

NOTICE

To activate the One Touch Turn

Signal function, push the turn signal

lever up or down to position (B) and

then release it.

The lane change signals will blink 3,

5 or 7 times.

You can activate or deactivate the

One Touch Turn Signal function or

choose the number of blinks (3, 5, or

7) from the User Settings mode in

the LCD display.

When in operation, the fog lamps

consume large amounts of vehicle

electrical power. Only use the fog

lamps when visibility is poor.

Battery saver function

The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the parking lamp when the

driver turns the vehicle off and opens

the driver-side door.

With this feature, the parking lamps

will turn off automatically if the driver

parks on the side of road at night.

OOS047414N

For more information, refer to the

"LCD Display" section in this

chapter.

Fog lamps are used to provide

improved visibility when visibility is

poor due to fog, rain or snow, etc.

Use the switch next to the headlamp

switch to turn the fog lamps ON and

OFF.

1. Turn on the parking lamp.

2. Turn the headlamp switch (1) to

the front fog lamp position.

3. To turn off the front fog lamp, turn

the headlamp switch to the front

fog lamp position again or turn off

the parking lamp.

If necessary, to keep the lamps on

when the vehicle is turned off, perform

the following:

1) Open the driver-side door.

2) Turn the parking lamps OFF and

ON again using the headlamp

switch on the steering column.

3-96

Headlamp delay function

Smart cornering lamp

(if equipped)

NOTICE

If the key is removed from the ignition

switch or placed in the ACC position

or the LOCK/OFF position with the

headlamps ON, the headlamps

(and/or parking lamps) remain on for

about 5 minutes. However, if the dri-

ver’s door is opened and closed, the

headlights are turned off after 15

seconds. Also, with the engine off if

the driver's door is opened and

closed, the headlamps (and/or park-

ing lamps) are turned off after 15

seconds.

The headlamps (and/or parking

lamps) can be turned off by pressing

the lock button on the remote key or

smart key twice or turning the head-

lamp switch to the OFF or AUTO

position.

If the driver exits the vehicle

through another door besides the

driver door, the battery saver func-

tion does not operate and the

headlamp delay function does not

turn OFF automatically.

This may cause the battery to dis-

charge. To avoid battery dis-

charge, turn OFF the headlamps

As an optional safety feature, your

vehicle may be equipped with a

smart cornering lamp. The cornering

lamp turns ON automatically while

driving when the vehicle enters into a

cornering maneuver.

3

The system will operate under the

following conditions:

manually from the headlamp • When the headlamps are turned

switch before exiting the vehicle.

ON

• When the steering angle is above

25 to 35 degrees (depending on

vehicle speed)

• When the vehicle speed is under

25 mph (40 kph)

When the smart cornering lamp

turns on, the front fog lamp turns off.

(if equipped)

You can activate or deactivate the

Headlamp Delay function from the

User Settings Mode in the LCD dis-

play.

For more information, refer to the

"LCD Display" section in this

chapter.

3-97

Convenient features of your vehicle

Front Map Lamp (1) :

Front lamps

Interior Lights

WARNING

Press either lenses to turn the map

lamp on or off. This light produces a

spot beam for convenient use as a

map lamp at night or as a personal

lamp for the driver and the front pas-

senger.

■ Type A (Without sunglass case)

Do not use the interior lights

when driving in the dark. The

interior lights may obscure your

view and cause an accident.

Front Door Lamp (2) (

):

The front or rear room lamps come on

when the front or rear doors are

opened if the engine is running or not.

When doors are unlocked by the

remote key or smart key, the front and

rear lamps come on for approximate-

ly 30 seconds as long as any door is

not opened. The front and rear room

lamps go out gradually after approxi-

mately 30 seconds when the door is

closed. However, if the ignition switch

is in the ON position or all doors are

locked, the front and rear lamps will

turn off. If a door is opened with the

ignition switch in the ACC position or

the OFF position, the front and rear

lamps stay on for about 20 minutes.

NOTICE

Do not use the interior lights for

extended periods when the vehi-

cle is turned off or the battery will

discharge.

OOS047051

■ Type B (With sunglass case)

Interior lamp AUTO cut

The interior lamps will automatically

go off approximately 20 minutes after

the engine is turned off and the

doors are closed. If a door is opened,

the lamp will go off 40 minutes after

the engine is turned off. If the doors

are locked by the remote key or

smart key and the vehicle enters the

armed stage of the theft alarm sys-

tem, the lamps will go off five sec-

onds later.

OOS047052

3-98

Front room lamp

Rear lamp

Luggage compartment lamp

(if equipped)

(3) :

■ Type A

•

Press the button to turn ON the

room lamp for the front/rear seats.

(4) :

•

3

Press the button to turn OFF the

room lamp for the front/rear seats

regardless of front or rear door open

position.

OOS047321

■ Type B

OOS047054

The luggage compartment lamp

comes on when the liftgate is

opened.

NOTICE

The luggage compartment lamp

comes on as long as the liftgate is

open.To prevent unnecessary bat-

tery system drain, close the lift-

gate securely after using the lug-

gage compartment.

OOS047053

Rear Room Lamp (

):

Press this switch to turn the rear

room lamp on and off.

3-99

Convenient features of your vehicle

Vanity mirror lamp

Welcome System

Welcome light

Interior lamp

When the interior lamp switch is in

the DOOR position and all doors are

closed and locked, the room lamp

will come on for 30 seconds if any of

the below is performed.

• When the door unlock button is

pressed on the remote key or

smart key.

• When the button of the outside

door handle is pressed.

At this time, if you press the door lock

or unlock button on the remote key or

smart key the room lamp will turn off

immediately.

OOS047055

Push the switch to turn the light on or

off.

•

: The lamp will turn on if this

button is pressed.

: The lamp will turn off if this

button is pressed.

•

NOTICE

Always have the switch in the off

position when the vanity mirror

lamp is not in use. If the sunvisor

is closed without the lamp off, it

may discharge the battery or dam-

age the sunvisor.

3-100

Convenient features of your vehicle -> Lighting for Your Hyundai Kona SUV 2020

Popular Manuals