Get Convenient features of your vehicle -> Windows Guide for Hyundai Kona SUV 2020

WINDOWS

(1) Driver’s door power window

switch

(2) Front passenger’s door power

window switch

(3) Rear door (left) power window

switch

(4) Rear door (right) power window

switch

(5) Window opening and closing

(6) Automatic power window

(7) Power window lock switch

OOS047017

3-35

Convenient features of your vehicle

Window opening and closing

Power Windows

Information

The ignition switch must be in the ON

position to be able to raise or lower

the windows. Each door has a Power

Window switch to control that door’s

window. The driver has a Power

Window Lock switch which can block

the operation of passenger windows.

The power windows will operate for

approximately 30 seconds after the

ignition switch is placed in the ACC

or LOCK/OFF position. However, if

the front doors are opened, the

Power Windows will not operate even

within the 30 second period.

• In cold and wet climates, power win-

dows may not work properly due to

freezing conditions.

• While driving with the rear win-

dows down or with the sunroof (if

equipped) opened (or partially

opened), your vehicle may demon-

strate a wind buffeting or pulsation

noise. This noise is normal and can

be reduced or eliminated by taking

the following actions. If the noise

occurs with one or both of the rear

windows down, partially lower both

front windows approximately one

inch. If you experience the noise

with the sunroof open, slightly close

the sunroof.

OOS047018

To open:

Press the window switch down to the

first detent position (5). Release the

switch when you want the window to

stop.

WARNING

To avoid serious injury or death,

do not extend your head, arms

or body outside the windows

while driving.

To close:

Pull the window switch up to the first

detent position (5). Release the win-

dow switch when you want the win-

dow to stop.

3-36

Auto down window (if equipped) To reset the power windows

Automatic reverse (if equipped)

Pressing the power window switch If the power windows do not operate

down momentarily to the second normally, the automatic power win-

detent position (6) completely lowers dow system must be reset as follows:

the window even when the switch is

1. Place the ignition switch to the ON

released. To stop the window at the

position.

desired position while the window is

2. Close the window and continue

in operation, pull up or press down

pulling up on the power window

and release the switch.

switch for at least one second.

If the power windows do not operate

Auto up/down window

(if equipped)

properly after resetting, have the

system checked by an authorized

HYUNDAI dealer.

OLF044032

Pressing or pulling up the power win-

dow switch momentarily to the sec-

ond detent position (6) completely

lowers or lifts the window even when

the switch is released. To stop the

window at the desired position while

the window is in operation, pull up or

press down and release the switch.

If a window senses any obstacle while

it is closing automatically, it will stop

and lower approximately 12 inches (30

cm) to allow the object to be cleared.

If the window detects the resistance

while the power window switch is

pulled up continuously, the window

will stop upward movement then

lower approximately 1 inch (2.5 cm).

If the power window switch is pulled

up continuously again within 5 sec-

onds after the window is lowered by

the automatic window reverse fea-

ture, the automatic window reverse

will not operate.

WARNING

The automatic reverse feature

doesn't activate while resetting

the power window system. Make

sure body parts or other objects

are safely out of the way before

closing the windows to avoid

injuries or vehicle damage.

3-37

Convenient features of your vehicle

Power window lock switch

Information

WARNING

The automatic reverse feature is only

active when the "Auto Up" feature is

used by fully pulling up the switch to

the second detent.

Do not allow children to play

with the power windows. Keep

the driver's door power window

lock switch in the LOCK posi-

tion. Serious injury or death can

result from unintentional win-

dow operation by a child.

WARNING

Make sure body parts or other

objects are safely out of the way

before closing the windows to

avoid injuries or vehicle damage.

Objects less than 0.16 inch

(4 mm) in diameter caught

between the window glass and

the upper window channel may

not be detected by the automatic

reverse window and the window

will not stop and reverse direc-

tion.

NOTICE

• To prevent possible damage to

the power window system, do

not open or close two windows

or more at the same time. This

will also ensure the longevity of

the fuse.

• Never try to operate the main

switch on the driver's door and

the individual door window

switch in opposite directions at

the same time. If this is done, the

window will stop and cannot be

opened or closed.

OOS047019

The driver can disable the power

window switches on the rear passen-

ger doors by pressing the power win-

dow lock switch.

When the power window lock switch

is pressed:

• The rear passenger control will not

be able to operate the rear passen-

ger power window

• Note that the front passenger con-

trol is still able to operate the front

passenger window, and that the

driver master control can still oper-

ate all the power windows.

NOTICE

Do not install any accessories on

the windows.The automatic reverse

feature may not operate.

3-38

Convenient features of your vehicle -> Windows for Your Hyundai Kona SUV 2020

Popular Manuals