Get Driving your vehicle -> Cruise Control Guide for Hyundai Kona SUV 2020

Driving your vehicle

CRUISE CONTROL

Cruise Control operation

• Do not use when:

WARNING

- Driving in heavy traffic or

when traffic conditions make

it difficult to drive at a con-

stant speed

Take the following precautions:

• Always set the vehicle speed

under the speed limit.

- Driving on rainy, icy, or

snow-covered roads

- Driving on hilly or windy

roads

• If the Cruise Control is left on,

(cruise indicator light in the

instrument cluster is illumi-

nated) the Cruise Control can

be activated unintentionally.

Keep the Cruise Control sys-

tem off (cruise indicator light

OFF) when the Cruise Control

is not in use, to avoid inadver-

tently setting a speed.

- Driving in windy areas

- Driving with limited view

(possibly due to bad weather

such as fog, snow, rain and

sandstorm)

OOS057052N

1. Cruise indicator

2. SET indicator

• Use the Cruise Control sys-

tem only when traveling on

open highways in good

weather.

• Do not use the Cruise Control

when it may be unsafe to keep

the vehicle at a constant

speed.

The Cruise Control system allows

you to drive at speeds above 20 mph

(30 km/h) without depressing the

accelerator pedal.

5-92

To set Cruise Control speed

Information

• During normal cruise control opera-

tion, when the SET switch is activat-

ed or reactivated after applying the

brakes, the cruise control will ener-

gize after approximately 3 seconds.

This delay is normal.

• Before activating the cruise control

function, the system will check to

verify that the brake switch is oper-

ating normally. Depress the brake

pedal at least once after turning ON

the ignition or starting the engine.

OOS057054N

3. Push the toggle switch down

(SET-), and release it. The SET

indicator light will illuminate.

OOS057053N

1. Press the CRUISE button on the

steering wheel to turn the system

on. The cruise indicator will illumi-

nate.

2. Accelerate to the desired speed,

which must be more than 20 mph

(30 km/h).

4. Release the accelerator pedal.

Information

On a steep slope, the vehicle may

slightly slow down or speed up, while

driving uphill or downhill.

5-93

Driving your vehicle

• Depress the accelerator pedal.

When the vehicle attains the

desired speed, push the toggle

switch down (SET-).

To increase Cruise Control

speed

To decrease Cruise Control

speed

OOS057055N

OOS057054N

• Push the toggle switch up (RES+)

and hold it, while monitoring the

SET speed on the instrument clus-

ter.

Release the toggle switch when

the desired speed is shown and

the vehicle will accelerate to that

speed.

• Push the toggle switch up (RES+)

and release it immediately. The

cruising speed will increase 1.0

mph (1.6 km/h) each time the tog-

gle switch is operated in this man-

ner.

• Push the toggle switch down (SET-)

and hold it.Your vehicle will gradual-

ly slow down. Release the toggle

switch at the speed you want to

maintain.

• Push the toggle switch down (SET-)

and release it immediately. The

cruising speed will decrease 1.0

mph (1.6 km/h) each time the toggle

switch is operated in this manner.

• Lightly tap the brake pedal. When

the vehicle attains the desired

speed, push the toggle switch

down (SET-).

5-94

• Downshifting to the 2nd gear in

manual shift mode. (for automatic

transmission/dual clutch transmis-

sion vehicle)

To temporarily accelerate with

the Cruise Control ON

Depress the accelerator pedal.When

you take your foot off the accelerator,

the vehicle will return to the previ-

ously set speed.

If you push the toggle switch down

(SET-) at the increased speed, the

Cruise Control will maintain the

increased speed.

Cruise Control will be canceled

when:

Information

Each of the above actions will cancel

Cruise Control operation (the "SET"

indicator in the instrument cluster will

go off), but only pressing the CRUISE

button will turn the system off. If you

wish to resume Cruise Control opera-

tion, push the toggle switch up (RES+)

located on your steering wheel. You

will return to your previously preset

speed, unless the system was turned off

using the CRUISE button.

OOS057056N

• Depressing the brake pedal.

• Pressing the CANCEL button

located on the steering wheel.

• Pressing the CRUISE button. Both

the cruise indicator and the "SET"

indicator will turn OFF.

• Moving the shift lever into N

(Neutral).(for automatic transmis-

sion/dual clutch transmission vehi-

cle)

• Decreasing the vehicle speed to

less than approximately 20 mph

(30 km/h).

• The ESC (Electronic Stability

Control) is operating.

5-95

Driving your vehicle

To resume preset Cruising

speed

To turn Cruise Control off

OOS057053N

OOS057055N

• Press the CRUISE button (the

cruise indicator light will go off).

• Turn the vehicle OFF.

Push the toggle switch up (RES+). If

the vehicle speed is over 20 mph (30

km/h), the vehicle will resume the

preset speed.

5-96

Driving your vehicle -> Cruise Control for Your Hyundai Kona SUV 2020

Popular Manuals