Get Driving your vehicle -> Smart Cruise Control system Guide for Hyundai Kona SUV 2020

SMART CRUISE CONTROL SYSTEM (IF EQUIPPED)

The Smart Cruise Control system

Smart Cruise Control Switch

allows you to program the vehicle to

maintain constant speed and mini-

mum distance between the vehicle

ahead.

The Smart Cruise Control system

will automatically adjust your vehicle

speed to maintain your programmed

speed and following distance without

requiring you to depress the acceler-

ator or brake pedals.

OOS059039R

WARNING

➀ Cruise indicator

➁ Set speed

➂ Vehicle-to-vehicle distance

OOS059120N

5

CRUISE: Turns cruise control sys-

tem on or off.

RES+: Resumes or increases cruise

control speed.

SET-: Sets or decreases cruise con-

trol speed.

CANCEL: Cancels cruise control

operation.

For your safety, please read the

owner's manual before using the

Smart Cruise Control system.

To see the SCC screen on the LCD

display in the cluster, select Assist

mode ( ). For more details, refer to

"LCD Display Modes" in chapter 3.

WARNING

The Smart Cruise Control sys-

tem is not a substitute for safe

driving practices, but a conven-

ience function only. It is the

responsibility of the driver to

always check the speed and

distance to the vehicle ahead.

: Sets vehicle-to-vehicle distance.

5-97

Driving your vehicle

Smart Cruise Control Speed

i

Information

To set Smart Cruise Control

speed

• Vehicle speed may decrease on an

upward slope and increase on a

downward slope.

• The speed is set to 18 mph (30

km/h) when there is a preceding car

in the front direction, and when it is

set in the situation where the car is

5 ~ 18 mph (10 ~ 30 km/h).

• When vehicle speed is under 6 mph

(10 km/h), the smart cruise control

is canceled. The driver must adjust

the vehicle speed by depressing the

accelerator or brake pedal accord-

ing to the road condition ahead and

driving condition.

OOS059054N

3. Push the toggle switch down

(SET-), and release it at the

desired speed. The Set Speed

and Vehicle-to-Vehicle Distance

on the LCD display will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-

cally be maintained.

OOS059053N

1. Push the CRUISE button on the

steering wheel to turn the system

on. The cruise indicator will illumi-

nate.

2. Accelerate to the desired speed.

If there is a vehicle in front of you, the

speed may decrease to maintain the

distance to the vehicle ahead.

The Smart Cruise Control speed

can be set as follows:

On a steep grade, the vehicle may

slow down or speed up slightly while

going uphill or downhill.

5 – 110 mph (10 - 180 km/h) :

5-98

To increase Smart Cruise

Control set speed

To decrease the Smart Cruise

Control set speed

CAUTION

Check the driving condition

before using the toggle lever.

Driving speed sharply increas-

es, when you push up and hold

the toggle lever.

OOS059055N

OOS059054N

5

Follow either of these procedures:

• Push the toggle switch up (RES+),

and release it immediately. The

cruising speed will increase by

1 mph (1 km/h) each time you

move the toggle switch up in this

manner.

• Push the toggle lever down (SET-),

and release it immediately. The

cruising speed will decrease by 1

mph (1 km/h) each time you move

the toggle lever down in this man-

ner.

• Push the toggle switch up (RES+),

and hold it. Your vehicle set speed

will increase by 5 mph (10 km/h).

Release the toggle switch at the

speed you want.

• Push the toggle lever down (SET-),

and hold it. Your vehicle set speed

will decrease by 5 mph (10 km/h).

Release the toggle lever at the

speed you want.

You can set the speed to 110 mph

(180 km/h).

• You can set the speed to 20 mph

(30 km/h).

5-99

Driving your vehicle

Canceled automatically

To temporarily accelerate with

the Smart Cruise Control on

Smart Cruise Control set speed

will be temporarily canceled

when:

• The driver's door is opened.

• The vehicle is shifted to

(Neutral), R (Reverse) or P (Park).

• The parking brake is applied.

• The vehicle speed is over 120 mph

(190 km/h).

If you want to speed up temporarily

when the Smart Cruise Control is on,

depress the accelerator pedal.

Increased speed will not interfere

with Smart Cruise Control operation

or change the set speed.

N

• The vehicle stops on a steep

incline.

To return to the set speed, take your

foot off the accelerator pedal.

• The ESC (Electronic Stability

Control), TCS (Traction Control

System) or ABS is operating.

If you push the toggle lever down

(SET-) at increased speed, the cruis-

ing speed will be set again pedal.

• The ESC is turned off.

OOS059056N

• The sensor or the cover is dirty or

blocked with foreign matter.

• The accelerator pedal is continu-

ously depressed for a long period

of time.

• The driver starts driving by pushing

the toggle switch up (RES+)/down

(SET-) or depressing the accelera-

tor pedal, after stopping the vehicle

with a vehicle stopped far away in

front.

CAUTION

Canceled manually

Be careful when accelerating

temporarily, because the speed

is not controlled automatically

at this time even if there is a

vehicle in front of you.

• Depressing the brake pedal.

• Pushing the CANCEL button locat-

ed on the steering wheel.

The Smart Cruise Control turns off

temporarily when the Set Speed and

Vehicle-to-Vehicle Distance indicator

on the LCD display turns off.

The cruise indicator is illuminated

continuously.

• The Forward Collision-Avoidance

Assist (FCA) is activated.

5-100

• The engine performance is abnor-

mal.

To resume Smart Cruise Control

set speed

• When the braking control is operat-

ed for FCA (Forward Collision-

Avoidance Assist)

• The engine speed is in dangerous

range.

If any method other than the cruise

toggle switch was used to cancel

cruising speed and the system is still

activated, the cruising speed will

automatically resume when you

push the toggle lever up (RES+) or

down (SET-).

If you push the toggle switch up

(RES+), the speed will resume to the

recently set speed. The vehicle

speed can be resumed only at

15mph (10 km/h).

In a condition the Smart Cruise

Control is canceled automatically,

the Smart Cruise Control will not

resume even though the RES+ or

SET- toggle switch is pushed.

OIK057096N

Smart Cruise Control canceled

If the system is cancelled, the warn-

ing chime will sound and a message

will appear for a few seconds.

You must adjust the vehicle speed by

depressing the accelerator or brake

pedal according to the road condition

ahead and driving condition.

Always check the road conditions.

Do not rely on the warning chime.

5

i

Information

CAUTION

If the Smart Cruise Control is canceled

by other than the reasons mentioned,

have the system checked by an author-

ized HYUNDAI dealer.

Always check the road condi-

tions when you push the toggle

lever up (RES+) to resume

speed.

5-101

Driving your vehicle

Each time the button is pressed, the

vehicle to vehicle distance changes

as follows:

To turn Cruise Control off

Smart Cruise Control Vehicle-

to-Vehicle Distance

To set Vehicle-to-Vehicle

Distance

Distance 4

Distance 3

Distance 2

Distance 1

For example, if you drive at 56 mph

(90 km/h), the distance is maintained

as follows:

Distance 4 - approximately 172 feet

Distance 3 - approximately 130 feet

Distance 2 - approximately 106 feet

Distance 1 - approximately 82 feet

OOS059053N

• Push the CRUISE button (the

cruise indicator light will go off).

If you wish not to use the cruise

control system, always turn the

system off by pushing the CRUISE

button.

OOS059124N

When the Smart Cruise Control sys-

tem is ON, you can set and maintain

the distance from the vehicle ahead

of you without pressing the accelera-

tor or brake pedal.

i

Information

The distance is set to the last set dis-

tance when the system is used for the

first time after starting the engine.

5-102

When the lane ahead is clear:

When there is a vehicle ahead

of you in your lane:

WARNING

Distance 4

Distance 2

Distance 3

OOS057016L

OOS059047R

Distance 1

When using the smart cruise

control System:

5

The vehicle speed will maintain the

set speed.

OOS059047R/OOS059048R/

OOS059050R/OOS059049R

• The warning chime sounds

and the Vehicle-to Vehicle

Distance indicator blinks if

the vehicle is unable to main-

tain the selected distance

from the vehicle ahead.

• If the warning chime sounds,

depress brake pedal to active-

ly adjust the vehicle speed,

and the distance to the vehi-

cle ahead.

• Your vehicle speed will slow down

or speed up to maintain the select-

ed distance.

• If the vehicle ahead speeds up,

your vehicle will travel at a steady

cruising speed after accelerating to

the set speed.

• Vehicles appear in LCD display

only if there is a front vehicle.

5-103

Driving your vehicle

• Even if the warning chime is

not activated, always pay

attention to the driving condi-

tions to prevent dangerous

situations from occurring.

WARNING

CAUTION

Take the following precautions :

• Always set the vehicle speed

under the speed limit.

• If the Smart Cruise Control is

left on, (cruise indicator light

in the instrument cluster is

illuminated) the Smart Cruise

Control can be activated unin-

tentionally. Keep the Smart

Cruise Control system off

(cruise indicator light OFF)

when the Smart Cruise

Control is not in use, to avoid

inadvertently setting a speed.

• Use the Smart Cruise Control

system only when traveling

on open highways in good

weather.

• Do not use the Smart Cruise

Control when it may not be

safe to keep the vehicle at a

constant speed.

OOS059051L

If the vehicle ahead (vehicle

speed: less than 20 mph (30

km/h)) disappears to the next

lane, the warning chime will

sound and a message "Watch

for surrounding vehicles" will

appear. Adjust your vehicle

speed for vehicles or objects

that can suddenly appear in

front of you by depressing the

brake pedal.

Always pay attention to the road

condition ahead.

5-104

Sensor to Detect Distance to

the Vehicle Ahead

- The smart cruise control is

supplemental systems to

assist you. Do not entirely

rely on the systems. Always

pay attention, while driving,

for your safety.

• Do not use when:

- Driving in heavy traffic or

when traffic conditions make

it difficult to drive at a con-

stant speed

- Driving on rainy, icy, or

snow-covered roads

- When driving on hilly or

windy roads

- Driving in windy areas

- Driving in parking lots

- Driving near crash barriers

- Driving on a sharp curve

- When using the cruise con-

trol mode, you must manual-

ly adjust the distance to

other vehicles by depressing

the brake pedal. The system

does

not

automatically

adjust the distance to vehi-

cles in front of you.

OOS057018

5

The Smart Cruise Control uses a

sensor to detect distance to the vehi-

cle ahead.

If the sensor is covered with dirt or

other foreign matter, the vehicle to

vehicle distance control may not

operate correctly.

- Driving with limited view

(possibly due to bad weath-

er, such as fog, snow, rain or

sandstorm)

- The vehicle's sensing ability

decreases due to vehicle

modification, resulting in a

level difference of the vehi-

cle's front and rear

Always keep the sensor clean.

5-105

Driving your vehicle

Warning message

i

Information

• Be careful not to apply unnec-

essary force on the radar sen-

sor or sensor cover. If the sen-

sor is forcibly moved out of

proper alignment, the Smart

Cruise Control system may

not operate correctly. In this

case, a warning message may

not be displayed. Have the

vehicle inspected by an

authorized HYUNDAI dealer.

• If the front bumper becomes

damaged in the area around

the radar sensor, the Smart

Cruise Control System may

not operate properly. Have the

vehicle inspected by an

authorized HYUNDAI dealer.

The SCC operation is temporarily dis-

abled if the radar is blocked, but if

you wish to use conventional cruise

control mode (speed only control func-

tion), you must convert to the cruise

control mode (refer to "To convert to

Cruise Control mode" in the following

page).

CAUTION

OTM058061L

• Do not apply foreign objects

such as a bumper sticker or a

bumper guard near the radar

Smart Cruise Control disabled.

Radar blocked

sensor. Doing

adversely affect the sensing

performance of the radar.

so

may

When the sensor lens cover is

blocked with dirt, snow, or debris, the

Smart Cruise Control system opera-

tion may stop temporarily. If this

occurs, a warning message will

appear on the LCD display. Remove

any dirt, snow, or debris and clean

the radar sensor lens cover before

operating the Smart Cruise Control

system. The Smart Cruise Control

system may not properly activate, if

the radar is totally contaminated, or if

any substance is not detected after

turning ON the engine (e.g. in an

open terrain).

• Use only genuine HYUNDAI

parts to repair or replace a

damaged sensor or sensor

cover. Do not apply paint to

the sensor cover.

• Always keep the radar sensor

and lens cover clean and free

of dirt and debris.

• Use only a soft cloth to wash

the vehicle. Do not spray pres-

surized water directly on the

sensor or sensor cover.

5-106

• Normal:

SCC Reaction Setting

Vehicle speed following the front

vehicle to maintain the set distance

is normal.

• Slow:

Vehicle speed following the front

vehicle to maintain the set distance

is slower than normal speed.

i

Information

OIK057110L

The last selected smart cruise control

sensitivity remained in the system.

Check Smart Cruise Control System

OIK057097N

The message will appear when the

vehicle to vehicle distance control

system is not functioning normally.

Take your vehicle to an authorized

HYUNDAI dealer and have the sys-

tem checked.

5

The sensitivity of vehicle speed

when following the front vehicle to

maintain the set distance can be

adjusted. Go to the 'User Settings →

Driver Assistance → SCC Reaction

→ Fast/Normal/Slow' on the LCD

display. You may select one of the

three stages you prefer.

• Fast:

Vehicle speed following the front

vehicle to maintain the set distance

is faster than normal speed.

5-107

Driving your vehicle

Conventional Cruise Control

Mode

The driver may choose to switch to

use the conventional Cruise Control

mode (speed only control function)

by following these steps:

Limitations of the System

WARNING

The Smart Cruise Control system

may have limits to its ability to detect

distance to the vehicle ahead due to

road and traffic conditions.

When using the conventional

Cruise Control mode, you must

manually adjust the distance to

other vehicles by depressing

the brake pedal. The system

does not automatically adjust

the distance to vehicles in front

of you.

1. Push the CRUISE button on the

steering wheel to turn the system

on. The cruise (

cator will illuminate.

) indi-

2. Push and hold the Vehicle-to-

Vehicle Distance button for more

than 2 seconds.

3. Choose between "Smart Cruise

Control" and "Cruise Control".

i

Information

When the system is turned OFF using

the CRUISE button or the CRUISE

button is turned ON after the vehicle

is restarted with the POWER button,

conventional cruise control will be dis-

abled and Smart Cruise Control mode

will be enabled again.

5-108

On curves

On inclines

OTM058073

Your vehicle speed can be reduced

due to a vehicle in the adjacent lane.

Apply the accelerator pedal and

select the appropriate set speed.

Check to be sure that the road con-

ditions permit safe operation of the

Smart Cruise Control.

OTM058117

OOS057073

5

• The Smart Cruise Control system

may not detect a moving vehicle in

your lane, and then your vehicle

could accelerate to the set speed.

Also, the vehicle speed will

decrease when the vehicle ahead

is recognized suddenly.

• Select the appropriate set speed

on curves and apply the brakes or

accelerator pedal if necessary.

• During uphill or downhill driving,

the Smart Cruise Control system

may not detect a moving vehicle in

your lane, and cause your vehicle

to accelerate to the set speed.

Also, the vehicle speed will rapidly

decrease when the vehicle ahead

is recognized suddenly.

• Select the appropriate set speed

on inclines and apply the brake or

accelerator pedal if necessary.

5-109

Driving your vehicle

A vehicle ahead cannot be recog-

nized correctly by the sensor if any of

following occurs:

Lane changing

Detecting vehicles

- When the vehicle is pointing

upwards due to overloading in the

luggage compartment

- While the steering wheel is operat-

ing

- When driving to one side of the

lane

- When driving on narrow lanes or

on curves

Apply the brake or accelerator pedal

if necessary.

OTM058074

OTM058128

• A vehicle which moves into your Some vehicles in your lane cannot

lane from an adjacent lane cannot be recognized by the sensor:

be recognized by the sensor until it

is in the sensor's detection range.

cles or bicycles

• The radar may not detect immedi-

- Narrow vehicles such as motorcy-

- Vehicles offset to one side

ately when a vehicle cuts in sud-

- Slow-moving vehicles or sudden-

denly. Always pay attention to the

decelerating vehicles

traffic, road and driving conditions.

- Stopped vehicles

• If a slower vehicle moves into your

- Vehicles with small rear profile

such as trailers with no loads

lane, your speed may decrease to

maintain the distance to the vehicle

ahead.

• If a faster vehicle which moves into

your lane, your vehicle will acceler-

ate to the set speed.

5-110

OTM058129

OTM058119

OTM058124

• Your vehicle may accelerate when • When driving in stop-and-go traffic, • Always look out for pedestrians

a vehicle ahead of you disappears.

and a vehicle in front of you

merges out of the lane, the system

may not immediately detect the

new vehicle that is now in front of

you. In this case, you must main-

tain a safe braking distance, and if

necessary, depress the brake

pedal to reduce your driving speed

in order to maintain a safe dis-

tance.

when your vehicle is maintaining a

distance with the vehicle ahead.

5

• When you are warned that the

vehicle ahead of you is not detect-

ed, drive with caution.

5-111

Driving your vehicle

• Vehicles moving in front of

you with a frequent lane

change may cause a delay in

the system's reaction or may

cause the system to react to a

vehicle actually in an adjacent

lane. Always drive cautiously

to prevent unexpected and

sudden situations from occur-

ring.

• Always be aware of the select-

ed speed and vehicle to vehi-

cle distance.

• The Smart Cruise Control sys-

tem may not recognize com-

plex driving situations so

always pay attention to driv-

ing conditions and control

your vehicle speed.

WARNING

When using the Smart Cruise

Control take the following pre-

cautions:

• If an emergency stop is nec-

essary, you must apply the

brakes. The vehicle cannot be

stopped at every emergency

situation by using the Smart

Cruise Control system.

• Keep a safe distance accord-

ing to road conditions and

vehicle speed. If the vehicle to

vehicle distance is too close

during a high-speed driving, a

serious collision may result.

• Always maintain sufficient

braking distance and deceler-

ate your vehicle by applying

the brakes if necessary.

OOS057022

• Always be cautious for vehicles

with higher height or vehicles car-

rying loads that sticks out from the

back of the vehicle.

• The smart cruise control

warning tone may not be emit-

ted while other warning tones

are given priority.

• The Smart Cruise Control sys-

tem cannot recognize

a

• For your safety, please read

the owner's manual before

using the smart cruise control

system.

stopped vehicle, pedestrians or

an oncoming vehicle. Always

look ahead cautiously to pre-

vent unexpected and sudden

situations from occurring.

5-112

i

Information

The Smart Cruise Control system

Information

Radio frequency radiation exposure

• The smart cruise control sys-

tem is not a substitute for safe

driving practices, but a con-

venience function only. It is

the responsibility of the driver

to always check the speed

and distance to the vehicle

ahead.

information:

may not operate temporarily due to:

• Electrical interference

• Modifying the suspension

• Differences of tire abrasion or tire

This equipment complies with FCC

radiation exposure limits set forth for

an uncontrolled environment.

This equipment should be installed

and operated with minimum distance

of 8 in. (20 cm) between the radiator

(antenna) and your body.

This transmitter must not be co-locat-

ed or operating in conjunction with

any other antenna or transmitter.

pressure

• The smart cruise control is

• Installing different type of tires

supplemental

system

to

assist you. Do not entirely rely

on the system. Always pay

attention, while driving, for

your safety.

i

Information

This device complies with Part 15 of

the FCC rules.

5

Operation is subject to the following

three conditions:

• If the vehicle and trailer are

towed, smart cruise control

may not operate correctly,

care must be taken to deal

with unexpected situations.

1. This device may not cause harmful

interference, and

2. This device must accept any inter-

ference received, including inter-

ference that may cause undesired

operation.

3. Changes or modifications not

expressly approved by the party

responsible for compliance could

void the user's authority to operate

the device.

5-113

Driving your vehicle -> Smart Cruise Control system for Your Hyundai Kona SUV 2020

Popular Manuals