Maintenance
3. Remove the fuse panel cover by
pressing the tap and pulling up.
Main fuse
Multi fuse
4. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized HYUNDAI dealer.
CAUTION
OOS077022
OOS077023
After checking the fuse box in
the engine compartment secure-
ly close the fuse box cover
inside the engine compartment,
until it clicks.
If the fuse box is not closed
properly, water may leak in side,
possibly causing a malfunction
with the electrical system.
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
4. Remove the nuts shown in the pic-
ture above.
4. Remove the nuts shown in the pic-
ture above.
5. Replace the fuse with a new one
of the same rating.
5. Replace the fuse with a new one
of the same rating.
6. Reinstall in the reverse order of
removal.
6. Reinstall in the reverse order of
removal.
i
Information
i
Information
If the main fuse is blown, consult an
authorized HYUNDAI dealer.
If the multi fuse is blown, consult an
authorized HYUNDAI dealer.
7-56