Driving your vehicle -> Ignition switch for Your Hyundai Santa Fe SUV 2023

06  
IGNITION SWITCH  
WARNING  
To reduce the risk of SERIOUS INJURY or  
DEATH, take the following precautions:  
WARNING  
śꢀ NEVER turn the ignition switch to  
the LOCK or ACC position while the  
vehicle is in motion except in an  
emergency.  
śꢀ NEVER allow children or any person  
who is unfamiliar with the vehicle to  
touch the ignition switch or related  
parts. Unexpected and sudden  
This will result in the engine turning  
off and loss of power assist for the  
steering and brake systems. This may  
lead to loss of directional control and  
braking function, which could cause  
an accident.  
vehicle movement can occur.  
śꢀ NEVER reach through the steering  
wheel for the ignition switch, or any  
other control, while the vehicle is in  
motion. The presence of your hand  
or arm in this area may cause a loss  
of vehicle control resulting in an  
accident.  
śꢀ Before leaving the driver's seat,  
always make sure the shift button is  
in 1st gear (for manual transmission  
vehicle) or P (Park, for automatic  
transmission vehicle) position, apply  
the parking brake, and turn the  
Key ignition switch (if equipped)  
ignition switch to the LOCK position.  
Unexpected vehicle movement may  
occur if these precautions are not  
followed.  
NOTICE  
Never use after market keyhole covers.  
This may generate start-up failure due  
to communication failure.  
OTM060051L  
[A] : LOCK, [B] : ACC  
[C] : ON, [D] : START  
Whenever the front door is opened, the  
ignition switch will illuminate, provided  
the ignition switch is not in the ON  
position. The light will go off immediately  
when the ignition switch is turned on or  
go off after about 30 seconds when the  
door is closed. (if equipped)  
6-5  
Driving your vehicle  
Key ignition switch positions  
Switch  
Action  
Notes  
Position  
To turn the ignition switch to the LOCK  
position, push the key in at the ACC  
position and turn the key towards the  
LOCK position.  
The ignition key can be removed in  
the LOCK position.  
LOCK  
The steering wheel locks to protect  
the vehicle from theft. (if equipped)  
Some electrical accessories are  
usable. The steering wheel unlocks.  
If difficulty is experienced turning the  
ignition switch to the ACC position,  
turn the key while turning the steering  
wheel right and left to release.  
ACC  
ON  
This is the normal key position when  
the engine has started. All features  
and accessories are usable.  
The warning lights can be checked  
when you turn the ignition switch  
from ACC to ON.  
Do not leave the ignition switch in the  
ON position when the engine is not  
running to prevent the battery from  
discharging.  
To start the engine, turn the ignition  
switch to the START position. The  
switch returns to the ON position  
when you let go of the key.  
The engine will crank until you release  
the key.  
START  
6-6  
06  
Starting the engine  
WARNING  
śꢀ Always wear appropriate shoes when  
operating your vehicle. Unsuitable  
shoes, such as high heels, ski boots,  
sandals, flip-flops, etc., may interfere  
with your ability to use the brake,  
accelerator and clutch pedals.  
śꢀ Do not start the vehicle with the  
accelerator pedal depressed. The  
vehicle can move which can lead to  
an accident.  
śꢀ Wait until the engine rpm is normal.  
The vehicle may suddenly move if  
the brake pedal is released when the  
rpm is high.  
Information  
śꢀ Do not wait for the engine to warm up  
while the vehicle remains stationary.  
Start driving at moderate engine  
speeds. (Steep accelerating and  
decelerating should be avoided.)  
śꢀ Always start the vehicle with your foot  
on the brake pedal. Do not depress the  
accelerator while starting the vehicle.  
Do not race the engine while warming  
it up.  
NOTICE  
To prevent damage to the vehicle:  
śꢀ Do not hold the ignition key in the  
START position for more than 10  
seconds. Wait 5 to 10 seconds before  
trying again.  
śꢀ Do not turn the ignition switch to  
the START position with the engine  
running. It may damage the starter.  
śꢀ If traffic and road conditions permit,  
you may put the shift button in the N  
(Neutral) position while the vehicle  
is still moving and turn the ignition  
switch to the START position in an  
attempt to restart the engine.  
1. Make sure the parking brake is  
applied.  
2. Make sure the shift button is in P  
(Park).  
3. Depress the brake pedal.  
4. Turn the ignition switch to the START  
position. Hold the key (maximum of  
10 seconds) until the engine starts and  
release it.  
śꢀ Do not push or tow your vehicle to  
start the engine.  
NOTICE  
If the engine does not start within 10  
seconds after preheating is completed,  
turn the ignition switch once more  
to the LOCK position and wait for 10  
seconds. Then turn the ignition switch  
to the ON position in order to preheat  
the engine again.  
6-7  
Driving your vehicle  
NOTICE  
Do not turn off the engine immediately  
after it has been subjected to a heavy  
load. Doing so may cause severe  
damage to the engine or turbo charger  
unit.  
NOTICE  
To prevent damage to the vehicle:  
śꢀ Do not hold the ignition key in the  
START position for more than 10  
seconds. Wait 5 to 10 seconds before  
trying again.  
śꢀ Do not turn the ignition switch to  
the START position with the engine  
running. It may damage the starter.  
śꢀ If traffic and road conditions permit,  
you may put the shift button in the N  
(Neutral) position while the vehicle  
is still moving and turn the ignition  
switch to the START position in an  
attempt to restart the engine.  
śꢀ Do not push or tow your vehicle to  
start the engine.  
6-8