Maintenance -> Wiper blades for Your Hyundai Santa Fe SUV 2023

Maintenance  
WIPER BLADES  
Blade inspection  
Blade replacement  
When the wipers no longer clean  
adequately, the blades may be worn or  
cracked, and require replacement.  
Contamination of either the windshield  
or the wiper blades with foreign matter  
can reduce the effectiveness of the  
windshield wipers.  
Common sources of contamination are  
insects, tree sap, and hot wax treatments  
used by some commercial car washes. If  
the blades are not wiping properly, clean  
both the window and the blades with a  
good cleaner or mild detergent, and rinse  
thoroughly with clean water.  
NOTICE  
To prevent damage to the wiper arms  
or other components, do not attempt to  
move the wipers manually.  
NOTICE  
The use of a non-specified wiper blade  
could result in wiper malfunction and  
failure.  
NOTICE  
To prevent damage to the wiper blades,  
arms or other components, do not:  
śꢀ Use gasoline, kerosene, paint  
thinner, or other solvents on or near  
them.  
NOTICE  
śꢀ In order to prevent damage to the  
hood and the wiper arms, the wiper  
arms should only be lifted when in  
the top wiping position.  
śꢀ Attempt to move the wipers  
manually.  
śꢀ Always return the wiper arms to the  
śꢀ Use non-specified wiper blades.  
windshield before driving.  
Information  
Commercial hot waxes applied by  
automatic car washes have been known to  
make the windshield difficult to clean.  
Information  
Wiper blades are consumable items.  
Normal wear of the wipers may not be  
covered by your vehicle warranty.  
9-26  
09  
Front windshield wiper service  
positions  
Type A  
OHI078075  
OTM090012  
This vehicle has a “hidden” wiper design  
which means that the wipers cannot  
be lifted when they are in their bottom  
resting position.  
1. Within 20 seconds of turning off the  
engine, lift and hold the wiper lever up  
to the MIST (or down to the V) position  
for about 2 seconds until the wipers  
move to the top wipe position.  
2. At this time you can lift the wipers off  
the windshield.  
3. Gently put the wipers back down onto  
the windshield.  
4. Turn the wipers to any ON position  
to return the wipers to the bottom  
resting position.  
OHI078076  
1. Lift up the wiper blade clip. Then lift  
up the wiper blade.  
2. While pushing the lock (1), pull down  
the wiper blade (2).  
OHI078077  
3. Remove the wiper blade from the  
wiper arm.  
4. Install a new wiper blade assembly in  
the reverse order of removal.  
5. Return the wiper arm on the  
windshield.  
9-27  
Maintenance  
Type B  
Rear window wiper blade  
replacement  
OTM090039  
1. Raise the wiper arm.  
OOSH089025L  
1. Raise the wiper arm and then rotate  
the wiper blade assembly (1).  
2. Pull out the wiper blade assembly (2).  
OTM090040  
2. Lift up the wiper blade clip. Then pull  
down the blade assembly and remove  
it.  
OOSH089026L  
3. Install the new blade assembly by  
inserting the center part into the slot  
in the wiper arm until it clicks into  
place (3).  
4. Make sure the blade assembly is  
installed firmly by trying to pull it  
slightly.  
5. Rotate back the blade assembly so  
that it aligns with the wiper arm.  
To prevent damage to the wiper arms or  
other components, we recommend that  
you have the wiper blades replaced by an  
authorized HYUNDAI dealer.  
OTM090041  
3. Install the new blade assembly in the  
reverse order of removal.  
4. Return the wiper arm on the  
windshield.  
9-28