Get Convenient Features of Your Vehicle -> Light Guide for Hyundai Tucson SUV 2020

LIGHT

Exterior Lights

■ Type A

Daytime running light (DRL)

The Daytime Running Lights (DRL)

can make it easier for others to see

the front of your vehicle during the

day, especially after dawn and before

sunset.

Lighting control

To operate the lights, turn the knob at

the end of the control lever to one of

the following positions:

3

The DRL system will turn the dedi-

cated lamp OFF when :

• The headlamps are ON.

• The parking lamps are ON.

• The vehicle is turned off.

• The parking brake is engaged.

OTL045316C

■ Type B

OOS047404N

(1) OFF position

(2) AUTO headlamp position

(3) Parking lamp position

(4) Headlamp position

3-107

Convenient features of your vehicle

NOTICE

• Do not cover or spill anything on

the sensor (1) located in front of

the instrument panel.

• Do not clean the sensor using a

window cleaner, the cleaner may

leave a light film which could

interfere with sensor operation.

• If your vehicle has window tint

or other types of metallic coat-

ing on the front windshield, the

AUTO headlamp system may not

work properly.

OTL048615

OTL045253C

AUTO light position

Parking lamp position (

)

The parking lamp and headlamp will

be turned ON or OFF automatically

depending on the amount of light

outside the vehicle.

The parking lamp, license plate lamp

and instrument panel lamp are turned

ON.

Even with the AUTO headlamp fea-

ture in operation, it is recommended

to manually turn ON the headlamps

when driving at night or in a fog, driv-

ing in the rain, or when you enter

dark areas, such as tunnels and

parking facilities.

3-108

High beam operation

3

OTL045317C

OTL045254C

Headlamp position (

The headlamp, parking lamp, license

plate lamp and instrument panel lamp

are turned ON.

)

To flash the high beam headlamp,

pull the lever towards you, then

release the lever. The high beams

will remain ON as long as you hold

the lever towards you.

OTL045255C

To turn on the high beam headlamp,

push the lever away from you. The

lever will return to its original position.

The high beam indicator will light

when the headlamp high beams are

switched on.

To turn off the high beam headlamp,

pull the lever towards you. The low

beams will turn on.

i

Information

The ignition switch must be in the ON

position to turn on the headlamp.

WARNING

Do not use high beam when there

are other vehicles approaching

you. Using high beam could

obstruct the other driver’s vision.

3-109

Convenient features of your vehicle

Operating condition

1. Place the headlamp switch in the

AUTO position.

2. Turn on the high beam by pushing

the lever away from you.

The High Beam Assist (HBA) (

indicator will illuminate.

3. The High Beam Assist (HBA) will

turn on when vehicle speed is

above 25 mph (40 km/h).

• If the headlamp switch is pulled

towards you when the high beam

is on by the High Beam Assist

(HBA), the low beam will be on

and the High Beam Assist (HBA)

will turn off.

• If the headlamp switch is placed

to the headlamp ON position, the

High Beam Assist (HBA) will turn

off and the low beam will be on

continuously.

High Beam Assist (HBA)

(if equipped)

)

• If the headlamp switch is pushed

away when the High Beam Assist

(HBA) is operating, the High

Beam Assist (HBA) will turn off

and the high beam will be on con-

tinuously.

• If the headlamp switch is pulled

towards you when the high beam

is off, the high beam will turn on

without the High Beam Assist

(HBA) canceled. When you let go

of the light switch, the lever will

move to the middle and the high

beam will turn off.

OTL048641

The High Beam Assist (HBA) is a

system that automatically adjusts the

headlamp range (switches between

high beam and low beam) according

to the brightness of other vehicles

and road conditions.

3-110

When the High Beam Assist (HBA) is

operating, the high beam switches to

low beam if any of the following con-

ditions occur :

- When the headlamp of an on-com-

ing vehicle is detected.

- When the tail lamp of a vehicle in

front is detected.

- When the headlamp or tail lamp of

a motorcycle or a bicycle is detect-

ed.

- When the surrounding ambient

light is bright enough that high

beams are not required.

- When streetlights or other lights

are detected.

- When the headlamp switch is not

in the AUTO position.

- When the High Beam Assist (HBA)

is off.

WARNING

The system may not operate

normally if any of the following

conditions should occur:

1) When the illumination from

an on-coming vehicle or a

vehicle in front is dim. Such

examples may include:

• When the headlamps of an on-

coming vehicle or the tail

lamps of a vehicle in front is

covered with dust, snow, or

water.

• When the headlamps on an

on-coming vehicle are OFF,

but the fog lamps are ON.

2) When the High Beam Assist

camera is adversely affected

by an external condition.

Such examples may include:

• When the vehicle's head-

lamps have been damaged or

not repaired properly.

3

OIK047132N

Warning light and message

When the High Beam Assist (HBA) is

not working properly, the Check High

Beam Assist warning message will

come on for a few second. After the

message disappears, the master

warning light (

) will illuminate.

Take your vehicle to an authorized

HYUNDAI dealer and have the sys-

tem checked.

- When vehicle speed is below 15

mph (24 km/h).

• When the vehicle headlamps

are not aimed properly.

3-111

Convenient features of your vehicle

• When the vehicle is driven on

a narrow curved road or rough

road.

• When the vehicle is driven on

an uphill road or downhill

road.

• When only part of the vehicle

in front is visible on a cross-

road or curved road.

• When there is a traffic light,

reflecting sign, flashing sign

or mirror.

• When the front window is cov-

ered with foreign matters

such as ice, dust, fog, or is

damaged.

3) When the forward visibility is

poor. Such examples may

include:

• When the headlamps of an on-

coming vehicle or a vehicle in

front is not detected due to

poor outside visibility (smog,

smoke, dust, fog, heavy rain,

snow, etc.).

WARNING

• Do not attempt to disassem-

ble the front view camera

without the assistance of an

authorized HYUNDAI dealer

technician. If camera is

removed for any reason, the

system may need to be re-cal-

ibrated. Have the system

inspected by an authorized

HYUNDAI dealer.

• If the windshield of your vehi-

cle is replaced, most likely the

front view camera will need to

be re-calibrated. If this occurs,

have your vehicle inspected

and have the system re-cali-

brated by an authorized

HYUNDAI dealer.

• When the road conditions are

bad such as being wet or cov-

ered with snow.

• When the windshield visibility

is poor.

• When

a vehicle suddenly

appears from a curve.

• When the vehicle is tilted from

a flat tire or being towed.

• Be careful that water doesn't

get into the High Beam Assist

(HBA) unit and do not remove

or damage related parts of the

High Beam Assist (HBA) sys-

tem.

• When the Lane Keeping

Assist (LKA) system warning

light illuminates.

• When the light from the on-

coming or front vehicle is not

detected because of exhaust

fume, smoke, fog, snow, etc.

3-112

One touch turn signal function

Turn signals and lane change

signals

• Do not place objects on the

crash pad that reflect light

such as mirrors, white paper,

etc. The system may malfunc-

tion if sunlight is reflected.

• At times, the High Beam

Assist (HBA) may not work

properly. The system is for

your convenience only. It is

the responsibility of the driver

for safe driving practices and

always check the road condi-

tions for your safety.

To activate the One Touch Turn

Signal function, move the turn signal

lever slightly and then release it. The

turn signal indicators will blink 3, 5,

or 7 times, depending on the User

Settings on the LCD display.

You can activate or deactivate the

One Touch Turn Signal function or

choose the number of blinking (3, 5,

or 7) from the User Settings Mode on

the LCD display.

3

For more details, refer to the "LCD

Display" section in this chapter.

OTL045257C

• When the system does not

operate normally, change the

headlamp position manually

between the high beam and

low beam.

To signal a turn, push down on the

lever for a left turn or up for a right

turn in position (A). To signal a lane

change, move the turn signal lever

slightly and hold it in position (B).The

lever will return to the original posi-

tion when released or when the turn

is completed.

If an indicator stays on and does not

flash or if it flashes abnormally, one of

the turn signal bulbs may be burned

out and will require replacement.

3-113

Convenient features of your vehicle

Front fog lamp (if equipped)

Battery saver function

NOTICE

The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the parking lamp when the

key is removed (remote key) or when

the driver turns the engine off (smart

key) and opens the driver-side door.

When in operation, the fog lamps

consume large amounts of vehicle

electrical power. Only use the fog

lamps when visibility is poor.

With this feature, the parking lamps

will turn off automatically if the driver

parks on the side of road at night.

If necessary, to keep the lamps on

when the engine is turned off, perform

the following:

OTL047258

Fog lamps are used to provide

improved visibility when visibility is

poor due to fog, rain or snow, etc. Use

the switch next to the headlamp switch

to turn the fog lamps ON and OFF.

1) Open the driver-side door.

2) Turn the parking lamps OFF and

ON again using the headlamp

switch on the steering column.

1. Turn on the parking lamp.

2. Turn the light switch (1) to the front

fog lamp position.

3. To turn off the front fog lamp, turn

the headlamp switch to the front

fog lamp position again or turn off

the parking lamp.

3-114

You can activate or deactivate the

Headlamp Delay function from the

User Settings Mode on the LCD dis-

play.

For more details, refer to the "LCD

Display" section in this chapter.

Headlamp delay function

Welcome System (if equipped)

Welcome light

If the key is removed from the ignition

switch or placed in the ACC position

or the LOCK/OFF position with the

headlamps ON, the headlamps

(and/or parking lamps) remain on for

about 5 minutes. However, if the dri-

ver's door is opened and closed, the

headlights are turned off after 15

seconds. Also, with the engine off if

the driver's door is opened and

closed, the headlamps (and/or park-

ing lamps) are turned off after 15

seconds.

The headlamps (and/or parking

lamps) can be turned off by pressing

the lock button on the remote key or

smart key twice or turning the light

switch to the OFF or AUTO position.

However, if you turn the light switch

to the AUTO position when it is dark

outside, the headlamps will not be

turned off.

3

NOTICE

If the driver gets out of the vehicle

through other doors (except dri-

ver’s door), the battery saver func-

tion does not operate and the

headlamp delay function does not

turn off automatically.Therefore, It

causes the battery to be dis-

charged. In this case, make sure

to turn off the headlamp switch

before getting out of the vehicle.

OTL048076N

Door handle lamp (if equipped)

When all the doors (and tailgate) are

closed and locked, the door handle

lamp will come on for about 15 sec-

onds if any of the below is performed.

• When the door unlock button is

pressed on the remote key or

smart key.

• When the button of the outside

door handle is pressed.

• When the vehicle is approached

with the smart key in possession.

3-115

Convenient features of your vehicle

Headlamp and Parking lamp

Interior lamp

Interior Lights

When the headlamp (lamp switch in

the headlamp or AUTO position) is

on and all doors (and tailgate) are

locked and closed, the parking lamp

and headlamp will come on for 15

seconds when the door unlock but-

ton is pressed on the remote key or

smart key.

When the interior lamp switch is in

the DOOR position and all doors (and

tailgate) are closed and locked, the

room lamp will come on for 30 sec-

onds if any of the below is performed.

• When the door unlock button is

pressed on the remote key or

smart key.

WARNING

Do not use the interior lights

when driving in the dark.The inte-

rior lights may obscure your view

and cause an accident.

At this time, if you press the door lock

or unlock button, the parking lamp

and headlamp will turn off immedi-

ately.

You can activate or deactivate the

Welcome Light from the User

Settings Mode on the LCD display.

• When the button of the outside

door handle is pressed.

At this time, if you press the door lock

or unlock button on the remote key or

smart key the room lamp will turn off

immediately.

NOTICE

Do not use the interior lights for

extended periods when the engine

is turned off or the battery will dis-

charge.

For more details, refer to the "LCD

Display" section in this chapter.

3-116

Front Map lamp

Interior lamp AUTO cut

Front lamps

• Press the map lamp cover (1) to

turn ON the map lamp. Re-press

the map lamp cover to turn OFF

the map lamp.

The interior lamps will automatically

go off approximately 20 minutes after

the engine is turned off and the

doors closed. If a door is opened, the

lamp will go off 40 minutes after the

engine is turned off. If the doors are

locked by the remote key or smart

key and the vehicle enters the armed

stage of the theft alarm system, the

lamps will go off five seconds later.

■ Type A

Front Room Lamp

3

•

:

(Type A) Press the button to turn

ON the map lamp for the front/rear

seats.

OTL047079L

(Type B) Press the button to turn

ON the map lamp for the front/rear

seats. Re-press the button to turn

OFF the map lamp.

■ Type B

•

:

(Type A) Press the button to turn

OFF the map lamp for the front/rear

seats.

OTL045080

(1) Front Map Lamp

(2) Front Room Lamp

(3) Front Door Lamp

3-117

Convenient features of your vehicle

Front Door Lamp

Rear lamps

NOTICE

■ Type A

Do not leave the lamp switches on

for an extended period of time

when the engine is turned off.

•

:

The map lamp for the front/rear

seats is automatically turned ON

for approximately 30 seconds,

when a door is opened.

The map lamp for the front/rear

seats is automatically turned ON

for approximately 15 seconds,

when the remote key (smart key)

unlocks the doors. The map lamp

fades out, when the ignition switch

is pressed to the ON position in 15

seconds. The map lamp remains

ON up to 20 minutes, when a door

is opened with the ignition switch in

the either the ACC or OFF position.

OTL045081

■ Type B

OTL045082

Rear Room Lamp (

) :

Press this switch to turn the rear

room lamp on and off.

3-118

Liftgate room lamp

Glove box lamp

Vanity mirror lamp

3

OTLE048083

OTLE048084

OTL045085

The liftgate room lamp comes on The glove box lamp comes on when The vanity mirror lamp is located in

when the tailgate is opened.

the glove box is opened.

If the glove box is not closed, the

lamp will turn off after 20 minutes.

the headliner just behind the sun

visor. Push the switch to turn the van-

ity light on or off.

NOTICE

•

: The lamp will turn on if this

button is pressed.

: The lamp will turn off if this

button is pressed.

The liftgate lamp comes on as

long as the liftgate is open.To pre-

vent unnecessary charging sys-

tem drain, close the liftgate

securely after using the liftgate.

NOTICE

•

To prevent possible battery dis-

charge, securely close the glove

box after use.

NOTICE

Always have the switch in the off

position when the vanity mirror

lamp is not in use. If the sunvisor

is closed without the lamp off, it

may discharge the battery or dam-

age the sunvisor.

3-119

Convenient features of your vehicle

WIPERS AND WASHERS

■ Front windshield wiper/washer

A : Wiper speed control

· MIST – Single wipe

· OFF – Off

Windshield Wipers

Operates as follows when the igni-

tion switch is in the ON position.

MIST : For a single wiping cycle,

push the lever upward and

release. The wipers will oper-

ate continuously if the lever is

held in this position.

· INT – Intermittent wipe

AUTO* – Auto control wipe

· LO – Low wiper speed

· HI – High wiper speed

OFF : Wiper is not in operation.

B : Intermittent control wipe time

adjustment

INT : Wiper operates intermittently at

the same wiping intervals. To

vary the speed setting, move

the speed control lever.

OTLE045161

■ Rear window wiper/washer

C : Wash with brief wipes

(pull lever towards you)

AUTO : A rain sensor located near

the top of the windshield

detects moisture accumula-

tion and controls the wiping

cycle automatically. This

mode is designed to operate

the wiper at an appropriate

speed depending on the

amount of rainfall. The sensi-

tivity can be varied by turn-

ing the adjustment control

(B) located on the wiper

stalk.

D : Rear wiper/washer control

· HI – High wiper speed

· LO – Low wiper speed

· OFF – Off

E : Wash with brief wipes (rear)

(push lever away from you)

* : if equipped

OTLA045318

LO : The wiper runs at a lower speed.

HI : The wiper runs at a higher speed.

3-120

AUTO - Automatic Wiper Control

(if equipped)

i

Information

WARNING

If there is heavy accumulation of snow

or ice on the windshield, defrost the

windshield for about 10 minutes, or

until the snow and/or ice is removed

before using the windshield wipers to

ensure proper operation.

A rain sensor located near the top of

the windshield detects moisture

accumulation and controls the wiping

cycle automatically. This mode is

designed to operate the wiper at an

appropriate speed depending on the

amount of rainfall. The sensitivity can

be varied by turning the adjustment

control (B) located on the wiper stalk.

If the wiper switch is set in AUTO

mode when the ignition switch is in

the ON position, the wiper will oper-

ate once to perform a self-check of

the system. Set the wiper control to

the OFF position when the wind-

shield wipers are not required.

To avoid personal injury from

the windshield wipers, when the

engine is running and the wind-

shield wiper switch is placed in

the AUTO mode:

• Do not touch the upper end of

the windshield glass facing

the rain sensor.

• Do not wipe the upper end of

the windshield glass with a

damp or wet cloth.

• Do not put pressure on the

windshield glass.

3

If you do not remove the snow and/or

ice before using the wiper and washer,

it may damage the wiper and washer

system.

3-121

Convenient features of your vehicle

Front Windshield Washers

NOTICE

WARNING

• When washing the vehicle, set

the wiper switch in the OFF posi-

tion to stop the auto wiper oper-

ation. The wiper may operate

and be damaged if the switch is

set in the AUTO mode while

washing the vehicle.

• Do not remove the sensor cover

located on the upper end of the

passenger side windshield

glass. Damage to system parts

could occur and may not be cov-

ered by your vehicle warranty.

When the outside temperature is

below freezing, ALWAYS warm

the windshield using the

defroster to help prevent the

washer fluid from freezing on the

windshield and obscuring your

vision which could result in an

accident and serious injury or

death.

OTLE045164

In the OFF position, pull the lever

gently toward you to spray washer

fluid on the windshield and to run the

wipers 1-3 cycles. The spray and

wiper operation will continue until you

release the lever. If the washer does

not work, you may need to add wash-

er fluid to the washer fluid reservoir.

• Because of using a photo sen-

sor, temporary malfunction

could occur according to sud-

den ambient light change made

by stone and dust while driving.

3-122

Rear Window Wiper and

Washer Switch

NOTICE

• To prevent possible damage to

the washer pump, do not oper-

ate the washer when the fluid

reservoir is empty.

• To prevent possible damage to

the wipers or windshield, do not

operate the wipers when the

windshield is dry.

3

• To prevent damage to the wiper

arms and other components, do

not attempt to move the wipers

manually.

• To prevent possible damage to

the wipers and washer system,

use anti-freezing washer fluids

in the winter season or cold

weather.

OTLE045166

Push the lever away from you to

spray rear washer fluid and to run the

rear wipers 1~3 cycles. The spray

and wiper operation will continue

until you release the lever.

OTLE045165

The rear window wiper and washer

switch is located at the end of the

wiper and washer switch lever. Turn

the switch to the desired position to

operate the rear wiper and washer.

Automatic Rear Wiper Operation

A useful feature of your vehicle is the

Auto Rear Wiper Operation. When

the front windshield wipers are oper-

ating, and when the vehicle is shifted

into reverse (R), the rear wiper will

come ON automatically and continue

to operate until the vehicle is shifted

out of reverse (R).

HI – High wiper speed

LO – Low wiper speed

OFF – Off

To enable or disable this feature in

the cluster LCD display, go to 'User

Settings → Convenience → Auto

Rear Wiper (in R)'.

3-123

Convenient Features of Your Vehicle -> Light for Your Hyundai Tucson SUV 2020

Popular Manuals