Get Maintenance -> Light Bulbs Guide for Hyundai Tucson SUV 2020

Maintenance

LIGHT BULBS

Consult an authorized HYUNDAI

dealer to replace most vehicle light

bulbs. It is difficult to replace vehicle

light bulbs because other parts of the

vehicle must be removed before you

can get to the bulb. This is especially

true for removing the headlamp

assembly to get to the bulb(s).

i

Information - Desiccant

(if equipped)

WARNING

• Prior to replacing a lamp,

depress the brake pedal,

move the shift lever into P

(Park) apply the parking

brake, place the igntion

switch to the LOCK/OFF posi-

tion, and take the key with you

when leaving the vehicle to

avoid sudden movement of

the vehicle and to prevent

possible electric shock.

This vehicle is equipped with desic-

cant to reduce fogging inside the head-

lamp due to moisture.

The desiccant is consumable and its

performance may change based on the

used period or environment.

If fogging inside the headlamp due to

moisture continues for a long time,

have your vehicle checked by an

authorized HYUNDAI dealer.

Removing/installing the headlamp

assembly can result in damage to

the vehicle.

i

Information

• Be aware the bulbs may be

hot and may burn your fin-

gers.

The headlamp and tail lamp lenses

could appear frosty if the vehicle is

washed after driving or the vehicle is

driven at night in wet weather. This

condition is caused by temperature

difference between the lamp inside

and outside and, it does not indicate a

problem with your vehicle. When

moisture condenses in the lamp, it will

be removed after driving with the

headlamp on. The removable level

may differ depending on lamp size,

lamp position and environmental con-

dition. However, if moisture is not

removed, we recommend that your

vehicle is inspected by an authorized

HYUNDAI dealer.

7-64

Type A

Headlamp, Daytime Running

Lamp, Side Marker, Parking

Lamp, Turn Signal Lamp and

Fog Lamp Replacement

(1) Headlamp (Low)

(2) Headlamp (High)

(3) Turn signal lamp/Parking lamp

(4) Side Marker

(5) Fog lamp*

(6) Daytime running lamp*

* : if equipped

OTL078065N

OTL078064N

7

OTL078016N

Type B

(1) Headlamp (Low)

(2) Headlamp (High)

(3) Turn signal lamp

OTLE078106

7-65

Maintenance

(4) Parking lamp

(5) Side Marker

(6) Fog lamp*

(7) Daytime running lamp*

* : if equipped

• Always handle them carefully, and

avoid scratches and abrasions. If

the bulbs are lit, avoid contact with

liquids.

• Never touch the glass with bare

hands. Residual oil may cause the

bulb to overheat and burst when lit.

• A bulb should be operated only

when installed in a headlamp.

• If a bulb becomes damaged or

cracked, replace it immediately

and carefully dispose of it.

OLMB073042L

Headlamp (Halogen bulb)

WARNING

• Handle halogen bulbs with

care. Halogen bulbs contain

pressurized gas that will pro-

duce flying pieces of glass

that could cause injuries if

broken.

• Wear eye protection when

changing a bulb. Allow the

bulb to cool down before han-

dling it.

7-66

■ High/Low beam

8. Connect the headlamp bulb sock-

et-connector.

9. Install the headlamp bulb cover by

turning it clockwise.

i

Information

The headlamp aiming should be

adjusted after an accident or after the

headlamp assembly is reinstalled at an

authorized HYUNDAI dealer.

Low

High

OTLE078019

OTLE078013

1. Open the hood.

2. Disconnect the negative battery

cable.

3. Remove the headlamp bulb cover

by turning it counterclockwise.

4. Disconnect the headlamp bulb

socket-connector.

5. Unsnap the headlamp bulb retain-

ing wire by pressing the end and

pushing it upward.

6. Remove the bulb from the head-

lamp assembly.

7. Install a new headlamp bulb and

snap the headlamp bulb retaining

wire into position by aligning the

wire with the groove on the bulb.

Turn signal lamp/Parking lamp

1. Open the hood.

2. Disconnect the negative battery

cable.

3. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

4. Remove the bulb from the socket

by pressing it in and rotating it

counterclockwise until the tabs on

the bulb align with the slots in the

socket. Pull the bulb out of the

socket.

7

7-67

Maintenance

5. Install a new bulb by inserting it Daytime running light (DRL),

into the socket and rotating it until Parking lamp and Side marker

it locks into place.

(LED type, if equipped)

6. Install the socket in the assembly If the LED lamp does not operate,

by aligning the tabs on the socket have the system checked by an

with the slots in the assembly.

authorized HYUNDAI dealer.

7. Push the socket into the assembly The LED lamps cannot be replaced

and turn the socket clockwise.

as a single unit because it is an inte-

grated unit.The LED lamps has to be

replaced with the unit.

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

OTL078032N

Front fog lamp (if equipped)

If the light bulb does not operate,

have the vehicle checked by an

authorized HYUNDAI dealer.

OTL078016N

Type C

(1) Headlamp (Low)

(2) Headlamp (High)

(3) Turn signal lamp

7-68

(4) Parking lamp

(5) Side Marker

(6) Fog lamp

Headlamp, Turn signal lamp,

Parking lamp, Daytime running

light and Side marker (LED type)

If the LED lamp does not operate,

have the system checked by an

authorized HYUNDAI dealer.

Side Repeater Lamp

Replacement

(7) Daytime running lamp

The LED lamps cannot be replaced

as a single unit because it is an inte-

grated unit.The LED lamps has to be

replaced with the unit.

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

OTL075066

Front fog lamp

If the light bulb does not operate,

have the vehicle checked by an

authorized HYUNDAI dealer.

If the LED lamp (1) does not operate,

have the system checked by an

authorized HYUNDAI dealer.

The LED lamps cannot be replaced

as a single unit because it is an inte-

grated unit.The LED lamps has to be

replaced with the unit.

7

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

7-69

Maintenance

Outside lamp

Rear Combination Light Bulb Replacement

Stop/tail Lamp, Turn signal Lamp

and Side marker lamp

1. Turn off the engine.

2. Open the liftgate.

3. Remove the cover using a flat-

blade screwdriver.

OTL078034N

OTL078109N

Type A

Type B

(1) Tail/Stop lamp

(2) Turn signal lamp

(3) Tail lamp

(4) Back-up lamp

(5) Side Marker

(1) Tail/Stop lamp, Tail lamp

(2) Turn signal lamp

(3 Tail/Stop lamp, Tail lamp

(4) Back-up lamp

(5) Side Marker

7-70

9. Install the socket in the assembly

by aligning the tabs on the socket

with the slots in the assembly.

Push the socket into the assembly

and turn the socket clockwise.

10. Reinstall the lamp assembly to

the body of the vehicle.

Tail lamp, Tail/Stop lamp and Side

marker

If the LED lamp does not operate,

have the system checked by an

authorized HYUNDAI dealer.

OTL078037N

[A] : Tail/Stop lamp, [B] : Turn signal lamp,

[C] : Side marker

OTL075035

The LED lamps cannot replaced as a

single unit because it is an integrated

unit. The LED lamps has to be

replaced with the unit.

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

6. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

7. Remove the bulb from the socket

by pressing it in and rotating it

counterclockwise until the tabs on

the bulb align with the slots in the

socket. Pull the bulb out of the

socket.

7

OTL075036

4. Loosen the lamp assembly retain-

ing screws with a cross-tip screw-

driver.

5. Remove the rear combination

lamp assembly from the body of

the vehicle.

8. Insert a new bulb by inserting it

into the socket and rotating it until

it locks into place.

7-71

Maintenance

Tail lamp, Tail/Stop lamp and Side

marker

If the LED lamp does not operate,

have the system checked by an

authorized HYUNDAI dealer.

Inside lamp

Tail lamp/Back-up lamp

1. Turn off the engine.

2. Open the liftgate.

Tail lamp

The LED lamps cannot replaced as a

single unit because it is an integrated

unit. The LED lamps has to be

replaced with the unit.

Back-up lamp

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

OTL078039

4. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

OTLE075016

5. Pull the bulb out of the socket.

6. Insert a new bulb by pushing it in

into the socket.

3. Remove the service cover using a

flat-blade screwdriver.

7. Install the socket into the assem-

bly by aligning the tabs on the

socket with the slots on the

assembly and turning the socket

clockwise.

8. Reinstall the lamp assembly to the

body of the vehicle.

7-72

High Mounted Stop Lamp

Replacement

License Plate Light Bulb

Replacement

Interior Light Bulb Replacement

Map lamp and Room lamp

(LED type)

■ Map lamp

OTLE078041

OTLE078040

OTLE075017

If the LED lamp (1) does not operate, 1. Loosen the lens retaining screws

■ Room lamp

have the system checked by an

authorized HYUNDAI dealer.

with a screwdriver.

2. Remove the lens.

The LED lamps cannot be replaced

as a single unit because it is an inte-

grated unit.The LED lamps has to be

replaced with the unit.

A skilled technician should check or

repair the LED lamp, for it may dam-

age related parts of the vehicle.

3. Remove the bulb by pulling it

straight out.

4. Install a new bulb.

5. Reinstall the lens securely with

the lens retaining screws.

7

OTL075044

If the LED lamp does not operate,

have the vehicle checked by an

authorized HYUNDAI dealer.

7-73

Maintenance

Map lamp, Room lamp, Vanity mirror lamp, Tailgate room lamp and Glove box lamp (Bulb type)

■ Map lamp

■ Vanity mirror lamp

■ Glove box lamp

OTLE075018

OTL075043

OTLE078046

■ Room lamp

■ Tailgate room lamp

1. Using a flat-head screwdriver,

gently pry the lens from the interi-

or light housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.

4. Align the lens tabs with the interi-

or light housing notches and snap

the lens into place.

If the lamps do not operating, have

the vehicle checked by an authorized

HYUNDAI dealer.

OLFH074029

OTL075045

NOTICE

Use care not to dirty or damage

lenses, lens tabs, and plastic

housings.

7-74

Maintenance -> Light Bulbs for Your Hyundai Tucson SUV 2020

Popular Manuals