2023 Kia Sorento SUV Driving your vehicle User Manual

MY CAR USER MANUAL

Driving your vehicle for Your Kia Sorento SUV 2023

Driving your vehicle  
Be sure the exhaust system does not leak.  
Before driving  
Driving your vehicle  
Before getting into the vehicle, you  
should examine the vehicle and its sur  
Be sure the exhaust system  
-
does not leak.  
roundings. After getting into the vehicle,  
you should check a number of things  
before driving.  
The exhaust system should be checked  
whenever the vehicle is raised to change  
the oil or for any other purpose.  
If you hear a change in the sound of the  
exhaust or if you drive over something  
that strikes the underneath side of the  
vehicle, have the exhaust system  
checked as soon as possible by an  
authorized Kia dealer.  
Before entering vehicle  
僅 Be sure that all windows, outside mir  
-
ror(s), and outside lights are clean.  
僅 Check the condition of the tires.  
僅 Check under the vehicle for any sign  
of leaks.  
僅 Be sure there are no obstacles behind  
you if you intend to back up.  
WARNING  
Engine exhaust  
Do not inhale exhaust fumes or leave  
your engine running in an enclosed area  
for a prolonged time. Exhaust fumes  
contain carbon monoxide, a colorless  
Necessary inspections  
Fluid levels, such as engine oil, engine  
coolant, brake fluid, and washer fluid  
should be checked on a regular basis, at  
the exact interval depending on the  
fluid. Further details are provided in  
"Maintenance" on page 7-5.  
and odorless gas that can cause uncon  
-
sciousness and death by asphyxiation.  
WARNING  
Open liftgate  
WARNING  
Distracted driving  
Do not drive with the liftgate open. Poi  
sonous exhaust gases can enter the pas  
senger compartment. If you must drive  
-
-
Focus on the road while driving. The  
driver's primary responsibility is in the  
safe and legal operation of the vehicle.  
Use of any hand-held devices, other  
equipment or vehicle systems that dis  
tract the driver should not be used  
during vehicle operation.  
with the liftgate open proceed as fol  
-
lows:  
1. Close all windows.  
2. Open side vents.  
3. Set the air intake control at "Fresh",  
the air flow control at "Floor" or "Face",  
and the fan at the highest speed.  
-
Before starting  
僅 Close and lock all doors.  
僅 Position the seat so that all controls  
are easily reached.  
僅 Buckle your seat belt.  
5
6
Driving your vehicle  
Before driving  
僅 Adjust the inside and outside rear  
view mirrors.  
僅 Be sure that all lights work.  
僅 Check all gauges.  
僅 Check the operation of warning lights  
when the ENGINE START/STOP but  
ton is turned to the ON position.  
stances. Drinking and driving is danger-  
ous. Even a small amount of alcohol will  
affect your reflexes, perceptions and  
judgment.  
Driving while under the influence of  
drugs or other impairing substances is  
as dangerous as or more dangerous  
than driving drunk.  
-
僅 Release the parking brake and make  
sure the brake warning light is not on.  
WARNING  
Proper footwear  
Always wear appropriate shoes when  
operating your vehicle. Unsuitable shoes  
(high heels, ski boots, sandals, etc.) may  
interfere with your ability to use the  
brake and accelerator pedals.  
For safe operation, be sure you are  
familiar with your vehicle and its equip  
-
ment.  
WARNING  
When you intend to park or stop the  
vehicle with the engine on, be careful  
not to depress the accelerator pedal for  
a long period of time. It may overheat  
the engine or exhaust system and cause  
fire.  
5
WARNING  
Check surroundings  
Always check the surrounding areas  
near your vehicle for people, especially  
children, before putting a vehicle into D  
(Drive) or R (Reverse).  
WARNING  
Loose objects  
Securely store items in your vehicle.  
When you make a sudden stop or turn  
the steering wheel rapidly, loose objects  
may drop on the floor and it could inter  
fere with the operation of the foot ped  
als, possibly causing an accident.  
-
-
WARNING  
Driving under the influence  
Do not drive while under the influence of  
alcohol, drugs, or other impairing sub  
-
5
7
Driving your vehicle  
Key positions  
LOCK (1)  
The ignition key can be removed only in  
the LOCK position.  
Key positions (if equipped)  
Your vehicle is equipped with four differ  
-
ent ignition positions.  
Illuminated ignition switch  
ACC (Accessory) (2)  
Whenever a front door is opened, the  
ignition switch will illuminate for your  
convenience, provided the ignition  
switch is not in the ON position.  
The electrical accessories are operative.  
If difficulty is experienced turning the  
ignition switch to the ACC position, turn  
the key while turning the steering wheel  
right and left to release the tension.  
ON (3)  
The warning lights can be checked  
before the engine is started. This is the  
normal running position after the engine  
is started.  
Do not leave the ignition switch ON if the  
engine is not running to prevent battery  
discharge.  
OMQ4050264L  
The light will go off immediately when  
the ignition switch is turned on. It will  
also go off after about 30 seconds when  
the door is closed.  
START (4)  
Turn the ignition switch to the START  
position to start the engine. The engine  
will crank until you release the key; then  
it returns to the ON position. The brake  
warning light can be checked in this  
position.  
Ignition switch position  
Your vehicle is equipped with four differ  
-
ent ignition positions.  
WARNING  
Ignition switch  
Never turn the ignition switch to LOCK  
or ACC while the vehicle is moving. This  
would result in loss of directional control  
and braking function, which could cause  
an accident.  
NOTICE  
If you leave the ignition switch to the  
ACC or ON position for a long time, the  
battery may discharge.  
OSK3058160NR  
5
8
Driving your vehicle  
Key positions  
the risk of an accident and causing  
WARNING  
Key holder  
the deactivation of several safety fea  
-
tures.  
Do not attach small purses, multiple  
keys, or any other heavy accessories to  
the driver's key chain used to start the  
vehicle. This may cause the driver to  
accidentally make the key inserted in the  
vehicle to change the ignition position to  
the ACC position while the vehicle is  
moving thereby increasing the risk of an  
accident and causing the deactivation of  
several safety features.  
僅 To avoid unexpected or sudden vehi  
cle movement, never leave your vehi  
cle if the gear is not locked in the P  
(Park) position and the parking brake  
is fully engaged. Before leaving the  
driver's seat, always make sure the  
gear is shifted to P (Park) position, set  
the parking brake fully and shut the  
engine off.  
-
-
NOTICE  
If you leave the ignition switch to the  
ACC or ON position for a long time, the  
battery may discharge.  
WARNING  
Leaving the vehicle  
To avoid unexpected or sudden vehicle  
movement, never leave your vehicle if  
the gear is not locked in the P (Park)  
position and the parking brake is fully  
engaged. Before leaving the driver's  
seat, always make sure the gear is  
5
Starting the engine  
1. Make sure the parking brake is  
applied.  
2. Make sure the gear is shifted to P  
(Park) position. Depress the brake  
pedal fully.  
shifted to P (Park) position, set the park  
ing brake fully and shut the engine off.  
-
3. Turn the ignition switch to START and  
hold it there until the engine starts (a  
maximum of 10 seconds), then  
release the key.  
Ignition key interlock system  
The ignition key cannot be removed  
unless the vehicle is in P (Park).  
WARNING  
It should be started without depress  
-
ing the accelerator pedal.  
僅 Never turn the ignition switch to LOCK  
or ACC while the vehicle is moving.  
This would result in loss of directional  
control and braking function, which  
could cause an accident.  
僅 Do not attach small purses, multiple  
keys, or any other heavy accessories  
to the driver's key chain used to start  
the vehicle. This may cause the driver  
to accidentally make the key inserted  
in the vehicle to change the ignition  
position to the ACC position while the  
vehicle is moving thereby increasing  
4. Do not wait for the engine to warm up  
while the vehicle remains stationary.  
Start driving at moderate engine  
speeds. (Steep accelerating and  
decelerating should be avoided.)  
Starting and stopping the engine  
for turbocharger intercooler  
1. Do not race or accelerate the engine  
immediately after starting.  
5
9
Driving your vehicle  
ENGINE START/STOP button  
If the engine is cold, idle for several  
seconds before sufficient lubrication  
is ensured in the turbocharger unit.  
2. After high speed or extended driving,  
requiring a heavy engine load, idle the  
engine about 1 minute before turning  
it off.  
ENGINE START/STOP button  
(if equipped)  
Illuminated ENGINE START/STOP  
button  
This idle time will allow the turbo  
-
charger to cool prior to shutting the  
engine off.  
WARNING  
Steering wheel  
Never reach for any controls through the  
steering wheel while the vehicle is in  
motion. The presence of your hand or  
arm in this area could cause a loss of  
vehicle control.  
OMQ4050016  
The light will go off after about 30 sec  
-
onds when the door is closed. It will also  
go off immediately when the theft-alarm  
system is armed.  
If the engine stalls while you are in  
motion, do not attempt to move the shift  
lever to the P (Park) position. If traffic  
and road conditions permit, you may put  
the shift lever in the N (Neutral) position  
while the vehicle is still moving and turn  
the ignition switch to the START position  
in an attempt to restart the engine.  
ENGINE START/STOP button  
position  
Your vehicle is equipped with four differ  
ent ignition positions.  
-
OFF  
CAUTION  
Starter  
To turn off the engine (START/RUN posi  
tion) or vehicle power (ON position),  
press the ENGINE START/STOP button  
with the gear in the P (Park) position.  
When you press the ENGINE START/  
STOP button without the gear in the P  
(Park) position, the ENGINE START/  
STOP button will not change to the OFF  
position but to the ACC position.  
-
Do not engage the starter for more than  
10 seconds. If the engine stalls or fails to  
start, wait 5 to 10 seconds before reen  
-
gaging the starter. Improper use of the  
starter may damage it.  
Anti-theft steering column lock  
(if equipped)  
The steering wheel locks when the  
ENGINE START/STOP button is in the  
5
10  
Driving your vehicle  
ENGINE START/STOP button  
OFF position to protect you against  
theft.  
It locks when the door is opened.  
僅 Press the ENGINE START/STOP but-  
ton when vehicle speed is 5 km/h (3  
mph) or over.  
If the steering wheel is not locked prop  
-
erly when you open the driver's door, the  
warning chime will sound. Try locking  
the steering wheel again. If the problem  
is not solved, have the system checked  
by an authorized Kia dealer.  
ACC (Accessory)  
In addition, if the ENGINE START/STOP  
button is in the OFF position after the  
driver's door is opened, the steering  
wheel will not lock and the warning  
chime will sound. In such a situation,  
close the door. Then the steering wheel  
will lock and the warning chime will stop.  
NOTICE  
OMQ4050294L  
If the steering wheel doesn't unlock  
Press the ENGINE START/STOP button  
while it is in the OFF position without  
depressing the brake pedal.  
5
properly, the ENGINE START/STOP but  
ton will not work. Press the ENGINE  
START/STOP button while turning the  
steering wheel right and left to release  
the tension.  
-
The steering wheel unlocks and electri  
-
cal accessories are operational.  
If the ENGINE START/STOP button is in  
the ACC position for more than 1 hour,  
the button is turned off automatically to  
prevent battery discharge.  
NOTICE  
You are able to turn off the engine  
(START/RUN) or vehicle power (ON),  
only when the vehicle is not in motion.  
ON  
Press the ENGINE START/STOP button  
while it is in the ACC position without  
depressing the brake pedal.  
The warning lights can be checked  
before the engine is started. Do not  
leave the ENGINE START/STOP button  
in the ON position for a long time. The  
battery may discharge, because the  
engine is not running.  
CAUTION  
In an emergency situation while the  
vehicle is in motion, you are able to turn  
the engine off and to the ACC position  
by pressing the ENGINE START/STOP  
button for more than 2 seconds or 3  
times repeatedly within 3 seconds.  
If the vehicle is still moving, to restart the  
vehicle:  
5
11  
Driving your vehicle  
ENGINE START/STOP button  
僅 Do not place any movable objects  
around the driver's seat as they may  
move while driving, interfere with the  
driver and lead to an accident.  
NOTICE  
If you leave the ENGINE START/STOP  
button in the ACC or ON position for a  
long time, the battery will discharge.  
Starting the engine  
WARNING  
僅 Do not start the vehicle with the accel  
erator pedal engaged. The vehicle can  
move and lead to an accident.  
僅 Wait until the engine rpm is normal.  
The vehicle may suddenly move if the  
brake pedal is released when the rpm  
is high.  
START/RUN  
To start the engine, depress the brake  
pedal and press the ENGINE START/  
STOP button with the gear in the P  
(Park) or the N (Neutral) position. For  
your safety, start the engine with the  
gear in the P (Park) position.  
-
NOTICE  
If you press the ENGINE START/STOP  
button without pressing the brake pedal,  
the engine will not start and the ENGINE  
START/STOP button changes as follow:  
Starting the engine with smart  
key  
At the time that the vehicle doors are  
opened or when the ENGINE START/  
STOP button is pressed the vehicle will  
check for the smart key.  
OFF → ACC → ON → OFF or ACC  
WARNING  
If the smart key is not in the vehicle, the  
僅 Never press the ENGINE START/STOP  
button while the vehicle is in motion.  
This would result in loss of directional  
control and braking function, which  
could cause an accident.  
"
" indicator and a message "Key is  
not in the vehicle" will appear on the  
instrument cluster and LCD window. And  
if all doors are closed, the chime will  
sound for 5 seconds. The indicator or  
warning will turn off while the vehicle is  
moving. Always have the smart key with  
you.  
僅 Before leaving the driver's seat,  
always make sure the gear is shifted  
to P (Park) position, set the parking  
brake fully and shut the engine off.  
Unexpected and sudden vehicle  
WARNING  
movement may occur if these precau  
-
The engine will start, only when the  
smart key is in the vehicle. Never allow  
children or any person who is unfamiliar  
with the vehicle touch the ENGINE  
START/STOP button or related parts.  
Pushing the ENGINE START/STOP but  
ton while the smart key is in the vehicle  
may result in unintended engine activa  
tions are not taken.  
僅 Never reach for the ENGINE START/  
STOP button or any other controls  
through the steering wheel while the  
vehicle is in motion. The presence of  
your hand or arm in the area could  
-
-
cause loss of vehicle control, an acci  
dent and serious bodily injury or  
death.  
-
tion and/or unintended vehicle move  
ment.  
-
5
12  
Driving your vehicle  
ENGINE START/STOP button  
always press the brake pedal before  
starting the engine.  
CAUTION  
If the engine stalls while the vehicle is in  
motion, do not attempt to move the gear  
to the P (Park) position. If the traffic and  
road conditions permit, you may put the  
gear in the N (Neutral) position while the  
vehicle is still moving and press the  
ENGINE START/STOP button in an  
attempt to restart the engine.  
CAUTION  
僅 Do not press the ENGINE START/  
STOP button for more than 10 sec  
-
onds except when the stop lamp fuse  
is blown.  
Starting the engine  
1. Carry the smart key or leave it inside  
the vehicle.  
2. Make sure the parking brake is firmly  
applied.  
3. Make sure the gear is shifted to P  
(Park) position. Depress the brake  
pedal fully.  
4. Press the ENGINE START/STOP but  
ton.  
It should be started without depress  
ing the accelerator pedal.  
NOTICE  
僅 If the battery is weak or the smart key  
does not work correctly, you can start  
the engine by pressing the ENGINE  
START/STOP button with the smart  
key.  
When you press the ENGINE START/  
STOP button directly with the smart  
key, the smart key should contact the  
button at a right angle.  
-
5
-
5. Do not wait for the engine to warm up  
while the vehicle remains stationary.  
Start driving at moderate engine  
speeds. (Steep accelerating and  
decelerating should be avoided.)  
Starting and stopping the engine  
for turbocharger intercooler  
1. Do not race or accelerate the engine  
immediately after starting.  
If the engine is cold, idle for several  
seconds before sufficient lubrication  
is ensured in the turbocharger unit.  
OMQ4051018L  
僅 When the stop lamp fuse is blown,  
you cannot start the engine normally.  
Replace the fuse with a new one. If it  
is not possible, you can start the  
engine by pressing the ENGINE  
START/STOP button for 10 seconds  
while it is in the ACC position. The  
engine can start without pressing the  
brake pedal. But for your safety  
2. After high speed or extended driving,  
requiring a heavy engine load, idle the  
engine about 1 minute before turning  
it off.  
This idle time will allow the turbo  
-
charger to cool prior to shutting the  
engine off.  
5
13  
Driving your vehicle  
Automatic transmission (Shift Lever)  
Automatic transmission (Shift  
Lever) (if equipped)  
CAUTION  
Do not turn the engine off immediately  
after it has been subjected to a heavy  
load. Doing so may cause severe dam  
age to the engine or turbocharger unit.  
-
OMQ4050021  
Depress the brake pedal and the  
lock release button when shifting.  
Press the unlock button when  
shifting.  
The shift lever can be shifted  
freely.  
Automatic transmission opera  
-
tion  
The automatic transmission has 8 for  
ward speeds and one reverse speed.  
The individual speeds are selected auto  
matically, depending on the balance  
between the fuel economy and the  
power.  
-
-
NOTICE  
The first few shifts on a new vehicle, if  
the battery has been disconnected, may  
be somewhat abrupt. This is a normal  
condition, and the shifting sequence will  
adjust after shifts are cycled a few times  
by the TCM (Transmission Control Mod  
-
ule) or PCM (Powertrain Control Mod  
-
ule).  
5
14  
Driving your vehicle  
Automatic transmission (Shift Lever)  
For smooth operation, depress the brake  
pedal when shifting from N (Neutral) to  
a forward or reverse gear.  
P (Park)  
Always come to a complete stop before  
shifting into P (Park). This position locks  
the transmission and prevents the front  
wheels from rotating.  
WARNING  
Automatic transmission  
僅 Always check the surrounding areas  
WARNING  
near your vehicle for people, espe  
-
僅 Shifting into P (Park) while the vehicle  
is in motion will cause the drive  
wheels to lock which will cause you to  
lose control of the vehicle.  
cially children, before shifting a vehi  
-
cle into D (Drive) or R (Reverse).  
僅 Before leaving the driver's seat,  
always make sure the shift lever is in  
the P (Park) position; then set the  
parking brake fully and shut the  
engine off. Unexpected and sudden  
vehicle movement can occur if these  
precautions are not followed in the  
order identified.  
僅 Do not use the P (Park) position in  
place of the parking brake. Always  
make sure the shift lever is latched in  
the P (Park) position and set the park  
ing brake fully.  
僅 Never leave a child unattended in a  
vehicle.  
-
僅 Do not use the engine brake (shifting  
5
from a high gear to lower gear) rap  
-
CAUTION  
The transmission may be damaged if  
you shift into P (Park) while the vehicle is  
in motion.  
idly on slippery roads.  
The vehicle may slip causing an acci  
-
dent.  
CAUTION  
僅 To avoid damage to your transmis  
-
R (Reverse)  
Use this position to drive the vehicle  
backward.  
sion, do not accelerate the engine in R  
(Reverse) or any forward gear posi  
tion with the brakes on.  
-
CAUTION  
僅 When stopped on an incline, do not  
hold the vehicle stationary with  
engine power. Use the service brake  
or the parking brake.  
僅 Do not shift from N (Neutral) or P  
(Park) into D (Drive), or R (Reverse)  
when the engine is above idle speed.  
Always come to a complete stop before  
shifting into or out of R (Reverse); you  
may damage the transmission if you  
shift into R while the vehicle is in motion,  
except as explained in "Rocking the  
vehicle" on page 5-186.  
Transmission ranges  
N (Neutral)  
The wheels and transmission are not  
engaged. The vehicle will roll freely even  
The indicator in the instrument cluster  
displays the shift lever position when the  
ignition switch or ENGINE START/STOP  
button is in the ON position.  
5
15  
Driving your vehicle  
Automatic transmission (Shift Lever)  
on the slightest incline unless the park  
-
NOTICE  
ing brake or service brakes are applied.  
Always come to a complete stop before  
shifting into D (Drive).  
WARNING  
Do not drive with the shift lever in N  
(Neutral).  
The engine brake will not work and lead  
to an accident.  
Manual mode  
CAUTION  
僅 Always park the vehicle in "P" (Park)  
for safety and engage the parking  
brake. If left in "N" (Neutral), the vehi  
-
cle may move and cause serious dam  
age and injury.  
-
僅 After the ignition switch or ENGINE  
START/STOP button has been turned  
off, the electronic parking brake can  
-
OMQ4050268L  
not be disengaged.  
Whether the vehicle is stationary or in  
motion, manual mode is selected by  
pushing the shift lever from the D (Drive)  
position into the manual gate. To return  
to D (Drive) range operation, push the  
shift lever back into the main gate.  
In manual mode, moving the shift lever  
backwards and forwards will allow you  
to make gearshifts rapidly. In contrast to  
a manual transmission, manual mode  
allows gearshifts with the accelerator  
pedal depressed.  
僅 For EPB (Electronic Parking Brake)  
equipped vehicles with AUTO HOLD  
function used while driving, if the igni  
-
tion button has been turned "OFF", the  
electronic parking brake will be  
engaged automatically. Therefore,  
AUTO HOLD function should be  
turned off before the ignition button is  
turned off.  
D (Drive)  
This is the normal forward driving posi  
僅 Up (+): Push the lever forward once to  
shift up one gear.  
僅 Down (-): Pull the lever backwards  
once to shift down one gear.  
-
tion. The transmission will automatically  
shift through 8 gear sequence, providing  
the best fuel economy and power.  
NOTICE  
僅 The driver must execute upshifts in  
accordance with road conditions, tak  
ing care to keep the engine speed  
below the red zone.  
For extra power when passing another  
vehicle or climbing grades, depress the  
accelerator fully, at which time the trans  
mission will automatically downshift to  
the next lower gear.  
-
-
僅 Only the 8 forward gears can be  
selected. To reverse or park the vehi  
-
5
16  
Driving your vehicle  
Automatic transmission (Shift Lever)  
cle, move the shift lever to the R  
(Reverse) or P (Park) position as  
required.  
僅 Downshifts are made automatically  
when the vehicle slows down. When  
the vehicle stops, 1st gear is automati  
cally selected.  
僅 When the engine rpm approaches the  
red zone shift points are varied to  
upshift automatically.  
僅 To maintain the required levels of  
vehicle performance and safety, the  
system may not execute certain gear  
shifts when the shift lever is operated.  
僅 When driving on a slippery road, push  
the shift lever forward into the +(up)  
position. This causes the transmission  
to shift into the 2nd gear which is bet  
ter for smooth driving on a slippery  
road. Push the shift lever to the -  
(down) side to shift back to the 1st  
gear.  
With the shift lever in the D posi  
tion  
-
The paddle shift function will operate  
when the vehicle speed is more than 10  
km/h (6 mph).  
Pull the [+] or [-] paddle shifter once to  
-
shift up or down one gear and the sys  
tem changes from automatic mode to  
manual mode.  
-
To change back to automatic shift mode  
from manual shift mode, do one of the  
followings:  
僅 Pull the [+] paddle shifter for more  
than one second  
-
僅 Move the shift lever from D (Drive) to  
manual gate and return it to D posi  
tion again  
-
-
The manual shift mode also changes  
back to automatic shift mode in one of  
following situations  
僅 When the accelerator pedal is gently  
depressed for more than 6 seconds  
while driving  
5
Paddle shifter (if equipped)  
The paddle shift function is available  
when the shift lever is in the D (Drive)  
position or the manual mode.  
僅 When the vehicle stops  
With the shift lever in the manual  
mode  
Pull the [+] or [-] paddle shifter once to  
shift up or down one gear.  
NOTICE  
If you pull the [+] and [-] paddle shifters  
at the same time, you cannot shift the  
gear.  
Shift lock system  
For your safety, the automatic transmis  
-
OMQ4051042  
sion has a shift lock system which pre  
vents shifting the transmission from P  
-
(Park) into R (Reverse) unless the brake  
pedal is depressed.  
5
17  
Driving your vehicle  
Automatic transmission (Shift Lever)  
To shift the transmission from P (Park)  
into R (Reverse):  
2. Apply the parking brake.  
3. Carefully remove the cap (1) covering  
the shift-lock release access hole.  
4. Insert a tool (e.g., flathead screw  
driver) into the access hole and press  
down on the tool.  
1. Depress and hold the brake pedal.  
2. Start the engine or turn the ignition  
switch or ENGINE START/STOP but  
-
-
ton to the ON position.  
3. Move the shift lever.  
5. Move the shift lever.  
If the brake pedal is repeatedly  
6. Remove the tool from the shiftlock  
override access hole then install the  
cap.  
If the shift lever does not move even  
after performing this procedure, have  
the system checked by a professional  
workshop. Kia recommends to visit an  
authorized Kia dealer/service partner.  
depressed and released with the shift  
lever in the P (Park) position, a chatter  
ing noise near the shift lever may be  
heard. This is a normal condition.  
-
WARNING  
Always fully depress the brake pedal  
before and while shifting out of the P  
(Park) position into another position to  
avoid inadvertent motion of the vehicle  
which could injure persons in or around  
the vehicle.  
Good driving practices  
僅 Never move the shift lever from P  
(Park) or N (Neutral) to any other  
position with the accelerator pedal  
depressed.  
僅 Never move the shift lever into P  
(Park) when the vehicle is in motion.  
Shift-lock override  
僅 Be sure the vehicle is completely  
stopped before you attempt to shift  
into R (Reverse) or D (Drive).  
僅 Never take the vehicle out of gear and  
coast down a hill. This may be  
extremely hazardous. Always leave  
the vehicle in gear when moving.  
僅 Do not "ride" the brakes. This can  
cause them to overheat and malfunc  
tion. Instead, when you are driving  
down a long hill, slow down and shift  
to a lower gear. When you do this,  
engine braking will help slow down  
the vehicle.  
-
OMQ4A050033  
If the shift lever cannot be moved from  
the P (Park) position into R (Reverse)  
position with the brake pedal depressed,  
continue depressing the brake, then do  
the following:  
僅 Slow down before shifting to a lower  
gear. Otherwise, the lower gear may  
not be engaged.  
僅 Always use the parking brake. Do not  
depend on placing the transmission in  
1. Place the ignition switch or ENGINE  
START/STOP button in the LOCK/OFF  
position.  
5
18  
Driving your vehicle  
Automatic transmission (Shift Lever)  
P (Park) to keep the vehicle from  
moving.  
僅 In the event your vehicle leaves the  
roadway, do not steer sharply.  
Instead, slow down before pulling  
back into the travel lanes.  
僅 Exercise extreme caution when driv  
-
ing on a slippery surface. Be espe  
-
cially careful when braking,  
僅 Never exceed posted speed limits.  
accelerating or shifting gears. On a  
slippery surface, an abrupt change in  
vehicle speed can cause the drive  
wheels to lose traction and the vehicle  
to go out of control.  
WARNING  
If your vehicle becomes stuck in snow,  
mud, sand, etc., then you may attempt  
to rock the vehicle free by moving it for  
ward and backward. Do not attempt this  
procedure if people or objects are any  
where near the vehicle. During the rock  
ing operation the vehicle may suddenly  
move forward or backward as it  
-
僅 Optimum vehicle performance and  
economy is obtained by smoothly  
-
depressing and releasing the acceler  
-
-
ator pedal.  
WARNING  
becomes unstuck, causing injury or  
damage to nearby people or objects.  
僅 When driving uphill or downhill,  
always shift to D (Drive) for driving  
forward or shift to R (Reverse) for  
driving backwards, and check the  
gear position indicated on the cluster  
before driving. Driving in the opposite  
direction of the selected gear can lead  
to a dangerous situation by shutting  
5
Moving up a steep grade from a  
standing start  
To move up a steep grade from a stand  
ing start:  
僅 Depress the brake pedal, shift the  
shift lever to D (Drive).  
Select the appropriate gear depend  
-
off the engine and affecting the brak  
-
ing performance.  
-
僅 Always buckle-up! In a collision, an  
unbelted occupant is significantly  
more likely to be seriously injured or  
ing on load weight and steepness of  
the grade, and release the parking  
brake. Depress the accelerator gradu  
-
killed than a properly belted occu  
-
ally after releasing the service brakes.  
pant.  
僅 Avoid high speeds when cornering or  
turning.  
僅 Do not make quick steering wheel  
movements, such as sharp lane  
changes or fast, sharp turns.  
僅 The risk of a rollover is greatly  
increased if you lose control of your  
vehicle at highway speeds.  
僅 Losing control often occurs if two or  
more wheels drop off the roadway  
and the driver oversteers to reenter  
the roadway.  
5
19  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
parking brake, and place the ignition  
Dual clutch transmission (DCT)  
(Shift Lever) (if equipped)  
switch or ENGINE START/STOP but  
-
ton in the LOCK/OFF position. Unex  
-
pected and sudden vehicle movement  
can occur if these precautions are not  
followed.  
僅 When using Manual Shift Mode, use  
caution when shifting from a higher  
gear to a lower gear on slippery roads.  
This could cause the tires to slip and  
may result in an accident.  
僅 To avoid damage to your transmis  
-
sion, do not try to accelerate with the  
shift lever in R (Reverse) or any for  
ward gear position with the brake  
engaged.  
-
OMQ4050021  
Depress the brake pedal and the  
lock release button when shifting.  
Press the unlock button when  
shifting.  
The shift lever can be shifted  
freely.  
* To move the shift lever from/to P  
(Parking) or between R (Reverse) and  
D (Drive), you must depress the brake  
pedal for the vehicle to stand still.  
僅 When stopped on a slope, do not hold  
the vehicle with accelerator pedal.  
Engage the service brake or the park  
-
ing brake.  
僅 The Dual Clutch Transmission gives  
the driving feel of a manual transmis  
-
sion, yet provides the ease of a fully  
automatic transmission. Unlike a tra  
-
ditional automatic transmission, the  
gear shifting can be felt (and heard)  
on the dual clutch transmission  
Dual clutch transmission opera  
tion  
-
- Think of it as an automatically shift  
ing manual transmission.  
-
The dual clutch transmission has 8 for  
-
ward speeds and one reverse speed.  
- Shift into Drive range and get fully  
The individual speeds are selected auto  
matically in the D (Drive) position.  
-
automatic shifting, similar to a con  
-
ventional automatic transmission.  
僅 Dual clutch transmission adopts wet-  
type dual clutch, which is different  
from torque converter of automatic  
transmission, and shows better accel  
eration performance during driving.  
But, initial launch might be little bit  
slower than Automatic Transmission.  
WARNING  
To reduce the risk of serious injury or  
death:  
僅 ALWAYS check the surrounding areas  
near your vehicle for people, espe  
cially children, before shifting a vehi  
cle into D (Drive) or R (Reverse).  
僅 Before leaving the driver's seat,  
always make sure the shift lever is in  
the P (Park) position, then set the  
-
-
-
僅 When rapidly accelerating at low vehi  
cle speed, engine could rev at high  
-
5
20  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
rpm depending on vehicle drive con  
-
dition.  
僅 For smooth launch uphill, depress the  
accelerator pedal smoothly depend  
ing on the current conditions.  
-
僅 If you release the accelerator pedal at  
low vehicle speed, you may feel  
strong engine brake, which is similar  
to manual transmission.  
僅 When driving downhill, you may use  
Sports Mode to downshift to a lower  
gear in order to control your speed  
without using the brake pedal exces  
sively.  
OMQ4050027L  
-
Steep grade  
僅 When you turn the engine on and off,  
you may hear clicking sounds as the  
system goes through a self test. This  
is a normal sound for the Dual Clutch  
Transmission.  
僅 Always come to a complete stop  
before shifting into D (Drive) or R  
(Reverse).  
Driving up hills or on steep grades:  
僅 To hold the vehicle on an incline use  
the foot brake or the parking brake.  
僅 When in stop-and-go traffic on an  
incline, keep some distance ahead  
before moving the vehicle forward.  
Then hold the vehicle on the incline  
with the foot brake.  
5
僅 Do not put the shift lever in N (Neu  
-
僅 If the vehicle is held on a hill by apply  
-
-
tral) while driving.  
ing the accelerator pedal or by creep  
ing with brake pedal disengaged, the  
WARNING  
clutch and transmission may overheat  
which can result in damage. At this  
time, a warning message will appear  
on the LCD display.  
Due to transmission failure, the vehicle  
may not move, and the position indica  
tor (D, R) will blink on the cluster. In this  
case, have the system checked by an  
authorized Kia dealer.  
-
僅 If the LCD warning is active, the foot  
brake must be applied.  
僅 Ignoring the warnings can lead to  
damage to the transmission.  
DCT warning messages  
This warning message is displayed when  
vehicle is driven slowly on a grade, and  
the vehicle detects that the brake pedal  
is not applied.  
5
21  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
僅 When possible, drive the vehicle  
smoothly.  
Transmission high temperature  
Transmission overheated  
OMQ4050283L  
僅 Under certain conditions, such as  
repeated stop-and-go launches on  
steep grades, sudden take off or  
acceleration, or other harsh driving  
conditions, the transmission clutch  
OMQ4050023L  
OMQ4050031L  
OMQ4050032L  
temperatures will increase exces  
-
sively. Finally, the clutch in transmis  
sion could be overheated.  
-
僅 When the clutch is overheated, the  
safe protection mode engages and  
the gear position indicator on the  
cluster blinks with a chime. At this  
time, "Transmission temp. is high!  
Stop safely" warning message will  
appear on the LCD display and driving  
may not be smooth.  
僅 If this occurs, pull over to a safe loca  
tion, stop the vehicle with the engine  
running, apply the brakes, shift the  
vehicle to P (Park) to allow the trans  
mission to cool.  
-
-
僅 If you ignore this warning, the driving  
condition may become worse. You  
may experience abrupt shifts, fre  
-
quent shifts, or jerkiness. Stop the  
vehicle by applying the brake, and  
shift into P (Park).  
僅 If the vehicle continues to be driven  
and the clutch temperatures reach the  
maximum temperature limit, the  
Then allow the transmission to cool  
for a few minutes with engine on,  
before driving off.  
5
22  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
"Transmission Hot! Park with engine  
on" warning will be displayed. When  
this occurs the clutch is disabled until  
apply the parking brake, and turn the  
engine off.  
僅 Do not use the P (Park) position in  
place of the parking brake.  
the clutch cools to normal tempera  
-
tures.  
僅 The warning will display a time to wait  
for the transmission to cool.  
R (Reverse)  
Use this position to drive the vehicle  
backward.  
僅 If this occurs, pull over to a safe loca  
-
tion, stop the vehicle with the engine  
running, apply the brakes, and shift  
the vehicle to P (Park) to allow the  
transmission to cool.  
CAUTION  
Always come to a complete stop before  
shifting into or out of R (Reverse); you  
may damage the transmission if you  
shift into R (Reverse) while the vehicle is  
in motion.  
僅 When the message "Trans cooled.  
Resume driving." appears, you can  
continue to drive your vehicle.  
僅 When possible, drive the vehicle  
smoothly.  
If any of the warning messages in the  
LCD display continue to blink, for your  
safety, have the system checked by an  
authorized Kia dealer.  
N (Neutral)  
The wheels and transmission are not  
engaged.  
5
Transmission ranges  
WARNING  
The indicator in the instrument cluster  
displays the shift lever position when the  
ignition switch or ENGINE START/STOP  
button is in the ON position.  
Do not shift into gear unless your foot is  
firmly on the brake pedal. Shifting into  
gear when the engine is running at high  
speed can cause the vehicle to move  
very rapidly. You could lose control of  
the vehicle and hit people or objects.  
P (Park)  
Always come to a complete stop before  
shifting into P (Park).  
WARNING  
To shift from P (Park), you must depress  
firmly on the brake pedal and make sure  
your foot is off the accelerator pedal.  
The shift lever must be in P (Park)  
before turning the engine off.  
Do not drive with the shift lever in N  
(Neutral).  
The engine brake will not work and lead  
to an accident.  
WARNING  
僅 Shifting into P (Park) while the vehicle  
is in motion may cause you to lose  
control of the vehicle.  
僅 After the vehicle has stopped, always  
make sure the shift lever is in P (Park),  
Parking in N (Neutral) gear  
Follow below steps when parking and  
you want the vehicle to move when  
pushed.  
5
23  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
1. After parking your vehicle, step on the  
brake pedal and move the shift lever  
to "P"(Park) with the ignition button in  
"ON" or while the engine is running.  
2. If the parking brake is applied unlock  
the parking brake.  
僅 For EPB (Electronic Parking Brake)  
equipped vehicles, push the brake  
pedal with the ignition button in  
"ON" or while the engine is running  
to disengage the parking brake. If  
AUTO HOLD function is used while  
driving (if "AUTO HOLD" indicator is  
on the cluster), press "AUTO HOLD"  
switch and "AUTO HOLD" function  
should be turned off.  
僅 For EPB (Electronic Parking Brake)  
equipped vehicles with AUTO HOLD  
function used while driving, if the igni  
-
tion button has been turned "OFF", the  
electronic parking brake will be  
engaged automatically. Therefore,  
AUTO HOLD function should be  
turned off before the ignition button is  
turned off.  
D (Drive)  
This is the normal driving position. The  
transmission will automatically shift  
through a 8 gear sequence, providing  
the best fuel economy and power.  
3. While pressing the brake pedal, turn  
the ignition button "OFF".  
僅 For smart key equipped vehicles,  
the ignition switch or ENGINE  
START/STOP button can be moved  
to "OFF" only when the shift lever is  
in "P"(Park).  
For extra power when passing another  
vehicle or driving uphill, depress the  
accelerator pedal further until you feel  
the transmission downshift to a lower  
gear.  
To stop the vehicle during driving,  
please press brake pedal fully to prevent  
unintended movement.  
4. Change the gear shift lever to "N"  
(Neutral) while pressing the brake  
pedal and pushing "SHIFT LOCK  
Manual mode  
RELEASE" button or inserting, press  
-
ing down a tool (e.g., flathead screw-  
driver) into the "SHIFT LOCK  
RELEASE" access hole at the same  
time. Then, the vehicle will move when  
external force is applied.  
CAUTION  
僅 Always park the vehicle in "P" (Park)  
for safety and engage the parking  
brake. If left in "N" (Neutral), the vehi  
-
cle may move and cause serious dam  
age and injury.  
-
OMQ4050268L  
Whether the vehicle is stationary or in  
motion, manual mode is selected by  
pushing the shift lever from the D (Drive)  
position into the manual gate. To return  
僅 After the ignition switch or ENGINE  
START/STOP button has been turned  
off, the electronic parking brake can  
-
not be disengaged.  
5
24  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
to D (Drive) range operation, push the  
shift lever back into the main gate.  
Paddle shifter (if equipped)  
The paddle shift function is available  
when the shift lever is in the D (Drive)  
position or the manual mode.  
In manual mode, moving the shift lever  
backwards and forwards will allow you  
to make gearshifts rapidly. In contrast to  
a manual transmission, Manual mode  
allows gearshifts with the accelerator  
pedal depressed.  
僅 Up (+): Push the lever forward once to  
shift up one gear.  
僅 Down (-): Pull the lever backwards  
once to shift down one gear.  
NOTICE  
僅 The driver must execute upshifts in  
accordance with road conditions, tak  
ing care to keep the engine speed  
below the red zone.  
-
OMQ4051042  
With the shift lever in the D posi  
tion  
The paddle shift function will operate  
when the vehicle speed is more than 10  
km/h (6 mph).  
Pull the [+] or [-] paddle shifter once to  
shift up or down one gear, and the sys  
tem changes from automatic mode to  
manual mode.  
To change back to automatic shift mode  
from manual shift mode, do one of the  
followings:  
僅 Pull the [+] paddle shifter for more  
than one second  
僅 Move the shift lever from D (Drive) to  
manual gate and return it to D posi  
tion again  
The manual shift mode also changes  
back to automatic shift mode in one of  
following situations  
僅 When the accelerator pedal is gently  
depressed for more than 6 seconds  
while driving  
-
僅 Only the 8 forward gears can be  
5
selected. To reverse or park the vehi  
cle, move the shift lever to the R  
(Reverse) or P (Park) position as  
required.  
-
僅 Downshifts are made automatically  
when the vehicle slows down. When  
the vehicle stops, 1st gear is automati  
cally selected.  
僅 When the engine rpm approaches the  
red zone, shift points are varied to  
upshift automatically.  
僅 To maintain the required levels of  
vehicle performance and safety, the  
system may not execute certain gear  
shifts when the shift lever is operated.  
僅 When driving on a slippery road, push  
the shift lever forward into the +(up)  
position. This causes the transmission  
to shift into the 2nd gear which is bet  
ter for smooth driving on a slippery  
road. Push the shift lever to the -  
(down) side to shift back to the 1st  
gear.  
-
-
-
-
-
僅 When the vehicle stops  
5
25  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
With the shift lever in the manual  
mode  
Shift-lock override  
Pull the [+] or [-] paddle shifter once to  
shift up or down one gear.  
NOTICE  
If you pull the [+] and [-] paddle shifters  
at the same time, you cannot shift the  
gear.  
Shift lock system (if equipped)  
For your safety, the Dual clutch trans  
-
OMQ4A050033  
mission has a shift lock system which  
prevents shifting the transmission from  
P (Park) into R (Reverse) unless the  
brake pedal is depressed.  
To shift the transmission from P (Park)  
into R (Reverse):  
If the shift lever cannot be moved from  
the P (Park) position into R (Reverse)  
position with the brake pedal depressed,  
continue depressing the brake, and then  
do the following:  
1. Place the ignition switch or ENGINE  
START/STOP button in the LOCK/OFF  
position.  
2. Apply the parking brake.  
3. Press the shift-lock release button.  
4. Press and hold the lock release button  
on the shift lever.  
5. Move the shift lever.  
1. Depress and hold the brake pedal.  
2. Start the engine or turn the ignition  
switch or ENGINE START/STOP but  
-
ton to the ON position.  
3. Move the shift lever.  
If the brake pedal is repeatedly  
depressed and released with the shift  
lever in the P (Park) position, a chatter  
-
ing noise & vibration near the shift lever  
If you need to use the shift-lock release,  
have your vehicle inspected by an  
authorized Kia dealer.  
may be heard. This is a normal condi  
-
tion.  
Good driving practices  
WARNING  
僅 Never move the shift lever from P  
(Park) or N (Neutral) to any other  
position with the accelerator pedal  
depressed.  
僅 Never move the shift lever into P  
(Park) when the vehicle is in motion.  
Always fully depress the brake pedal  
before and while shifting out of the P  
(Park) position into another position to  
avoid inadvertent motion of the vehicle  
which could injure persons in or around  
the vehicle.  
僅 Be sure the vehicle is completely  
stopped before you attempt to shift  
into R (Reverse) or D (Drive).  
僅 Never take the vehicle out of gear and  
coast down a hill. This may be  
5
26  
Driving your vehicle  
Dual clutch transmission (DCT) (Shift Lever)  
extremely hazardous. Always leave  
the vehicle in gear when moving.  
killed than a properly belted occu  
-
pant.  
僅 Do not "ride" the brakes. This can  
cause them to overheat and malfunc  
tion. Instead, when you are driving  
down a long hill, slow down and shift  
to a lower gear. When you do this,  
僅 Avoid high speeds when cornering or  
turning.  
僅 Do not make quick steering wheel  
movements, such as sharp lane  
changes or fast, sharp turns.  
僅 The risk of rollover is greatly  
increased if you lose control of your  
vehicle at highway speeds.  
僅 Loss of control often occurs if two or  
more wheels drop off the roadway,  
and the driver oversteers to reenter  
the roadway.  
-
engine braking will help slow the vehi  
-
cle.  
僅 Slow down before shifting to a lower  
gear. Otherwise, the lower gear may  
not be engaged.  
僅 Always use the parking brake. Do not  
depend on placing the transmission in  
P (Park) to keep the vehicle from  
moving.  
僅 In the event your vehicle leaves the  
roadway, do not steer sharply.  
Instead, slow down before pulling  
back into the travel lanes.  
僅 Exercise extreme caution when driv  
-
ing on a slippery surface. Be espe  
-
cially careful when braking,  
僅 Never exceed posted speed limits.  
5
accelerating or shifting gears. On a  
slippery surface, an abrupt change in  
vehicle speed can cause the drive  
wheels to lose traction and the vehicle  
to go out of control.  
WARNING  
If your vehicle becomes stuck in snow,  
mud, sand, etc., then you may attempt  
to rock the vehicle free by moving it for  
-
僅 Optimum vehicle performance and  
economy is obtained by smoothly  
ward and backward. Do not attempt this  
procedure if people or objects are any  
-
depressing and releasing the acceler  
-
where near the vehicle. During the rock  
-
ator pedal.  
ing operation the vehicle may suddenly  
move forward or backward as it  
WARNING  
becomes unstuck, causing injury or  
damage to nearby people or objects.  
僅 When driving uphill or downhill,  
always shift to D (Drive) for driving  
forward or shift to R (Reverse) for  
driving backwards, and check the  
gear position indicated on the cluster  
before driving. Driving in the opposite  
direction of the selected gear can lead  
to a dangerous situation by shutting  
off the engine and affecting the brak  
ing performance.  
僅 Always buckle-up! In a collision, an  
unbelted occupant is significantly  
more likely to be seriously injured or  
Moving up a steep grade from a  
standing start  
To move up a steep grade from a stand  
ing start, depress the brake pedal:  
僅 Shift the shift lever to D (Drive).  
Select the appropriate gear depend  
ing on load weight and steepness of  
the grade, and release the parking  
brake. Depress the accelerator gradu  
ally after releasing the brake pedal.  
-
-
-
-
5
27  
Driving your vehicle  
All Wheel Drive (AWD) system  
僅 Do not make quick steering wheel  
movements, such as sharp lane  
changes or fast, sharp turns.  
僅 The risk of a rollover is greatly  
increased if you lose control of your  
vehicle at highway speeds.  
僅 Loss of control often occurs if two or  
more wheels drop off the roadway,  
and the driver over steers to reenter  
the roadway.  
僅 In the event your vehicle leaves the  
roadway, do not steer sharply.  
Instead, slow down before pulling  
back into the travel lanes.  
All Wheel Drive (AWD) system  
(if equipped)  
The All Wheel Drive (AWD) system deliv  
ers engine power to front and rear  
wheels for maximum traction.  
-
AWD is useful when extra traction is  
required, such as when driving slippery,  
muddy, wet, or snow-covered roads.  
If the system determines there is a need  
for all wheel drive, the engine's driving  
power will be distributed to all four  
wheels automatically.  
WARNING  
Off road driving  
AWD (AWD/SNOW MODE)  
AWD helps the vehicle to maintain its  
best driving performance by controlling  
4 wheels, engine, transmission and brak-  
ing according to road conditions such as  
snow, mud, sand, etc.  
This vehicle is designed primarily for on  
road use although it can operate effec  
-
tively off road. However, it was not  
designed to drive in challenging off-road  
conditions. Driving in conditions that  
exceed the vehicle's intended design or  
the driver's experience level may result  
in severe injury or death.  
Advantages of AWD  
僅 Enhance safety when driving straight.  
僅 Improve performance when corner  
ing.  
僅 Ensure operability in tough driving  
conditions such as snow, rain, sand,  
etc.  
NOTICE  
-
If the AWD warning light ( ) stays on  
the instrument cluster, your vehicle may  
have a malfunction with the AWD sys  
-
tem. When the AWD warning light (  
)
illuminates, have your vehicle checked  
by an authorized Kia dealer.  
WARNING  
To reduce the risk of SERIOUS INJURY  
or DEATH:  
僅 Do not drive in conditions that exceed  
the vehicle's intended design such as  
challenging off-road conditions.  
僅 Avoid high speeds when cornering or  
turning.  
5
28  
Driving your vehicle  
All Wheel Drive (AWD) system  
You can switch from DRIVE MODE to  
SNOW mode by turning the knob. If you  
turn the DRIVE/SNOW mode button  
again, the vehicle will go back to DRIVE  
MODE.  
Switching from/to SNOW MODE  
(if equipped)  
NOTICE  
僅 Even though you turned off the vehi  
-
cle in SNOW mode, DRIVE mode will  
be set when you restart the vehicle.  
僅 When the AWD LOCK mode is deacti  
-
vated, a shock may be felt as the drive  
power is delivered entirely to the front  
wheels. This shock is not a mechanical  
failure.  
OMQ4A050292  
AWD transfer mode selection  
5
Transfer  
Selection mode  
mode  
Description  
DRIVE MODE is used when driving on roads  
in normal conditions, roads in urban areas,  
and on highways.  
All wheels are in operation when a vehicle  
travels at a constant speed. Required trac  
-
tions applying on front and rear wheels vary  
depending on road driving conditions and  
driving conditions, which will be automatically  
controlled by the computing system.  
DRIVE  
MODE  
-
When the cluster's DRIVE MODE display  
mode is selected, the cluster displays the sta  
tus of how four wheels' traction forces are  
distributed.  
-
SNOW mode is used to appropriately distribute  
the vehicle's traction forces and prevent wheel  
slippage when driving on snowy or slippery  
road.  
SNOW  
SNOW  
The main goal of AWD Lock mode is to allow  
a driver to maximize the vehicle's traction  
under extreme driving conditions such as  
unpaved off-road, sandy roads, and muddy  
roads.  
AWD  
LOCK  
(Indicator lights illu  
-
minated)  
5
29  
Driving your vehicle  
All Wheel Drive (AWD) system  
exhaust pipes. Do not drive down  
steep hills since it requires extreme  
skill to maintain control of the vehicle.  
CAUTION  
Normal road conditions  
僅 Maintain DRIVE mode when driving  
on roads in normal conditions.  
僅 Driving in TERRAIN mode on normal  
roads may damage the AWD system  
and cause mechanical vibration or  
noise.  
僅 When driving under normal road con  
-
ditions (especially when cornering) in  
AWD Lock mode, a driver may find  
minor mechanical vibration or noise,  
which is extremely normal phenome  
-
non, not a malfunction. When AWD  
OON058159NR  
Lock mode is released, such noise or  
vibration will be immediately gone.  
僅 When you are driving up or down hills  
drive as straight as possible. Use  
僅 When you turn off AWD Lock mode, it  
can lead to little shocks but this is a  
normal phenomenon that lasts until  
the traction forces on the front and  
rear wheels of the vehicle are  
released.  
extreme caution in going up or down  
steep hills, since you may flip your  
vehicle over depending on the grade,  
terrain, and water/mud conditions.  
For safe All Wheel Drive (AWD)  
operation  
NOTICE  
All Wheel Drive  
The conditions of on-road or off-road  
that demand rather than All Wheel Drive  
mean all functions of your vehicle are  
exposed to extreme stress than under  
normal road conditions. Slow down and  
be ready for changes in the composition  
and traction of the surface under your  
tires. If you have any doubt about the  
safety of the conditions you are facing,  
OON058160NR  
WARNING  
Hills  
Driving across the contour of steep hills  
can be extremely dangerous. This dan  
-
ger can come from slight changes in the  
wheel angle which can destabilize the  
vehicle or, even if the vehicle is main  
taining stability under power, it can lose  
that stability if the vehicle stops its for  
ward motion. Your vehicle may roll over  
stop and consider the best way to pro  
-
ceed.  
-
僅 Do not try to drive in deep standing  
water or mud since such conditions  
can stall your engine and clog your  
-
5
30  
Driving your vehicle  
All Wheel Drive (AWD) system  
without warning and without time for  
you to correct a mistake that could  
cause serious injury or death.  
僅 Always hold the steering wheel firmly  
when you are driving on unpaved  
roads.  
僅 Make sure all passengers are wearing  
seat belts.  
僅 You must learn how to corner in a  
AWD vehicle. Do not rely on your  
experience in conventional FWD vehi  
cles when cornering the vehicle in  
AWD mode. For starters, you must  
drive slower in AWD.  
WARNING  
Wind danger  
If you are driving in heavy wind, the  
vehicle's higher center of gravity  
-
decreases your steering control capacity  
and requires you to drive more slowly.  
WARNING  
All Wheel Drive (AWD)  
Reduce speed when you turn corners.  
WARNING  
Driving through water  
The center of gravity of AWD vehicles is  
higher than that of conventional FWD  
vehicles, making them more likely to roll  
over when you turn corners too fast.  
Drive slowly. If you are driving too fast in  
water, the water can get into the engine  
compartment and wet the ignition sys  
-
5
tem, causing your vehicle to suddenly  
stop. If this happens and your vehicle is  
in a tilted position, your vehicle may roll  
over.  
NOTICE  
僅 Do not drive in water if the level is  
higher than the bottom of the vehicle.  
僅 Check your brake condition once you  
are out of mud or water. Press the  
brake pedal several times as you  
move slowly until you feel normal  
braking forces return.  
OMQ4051269L  
WARNING  
Steering wheel  
僅 Shorten your scheduled maintenance  
interval if you drive in offroad condi  
-
Do not grab the inside of the steering  
tions such as sand, mud or water  
wheel when you are driving on unpaved  
(refer to "Maintenance under severe  
usage conditions" on page 7-12 and).  
Always wash your vehicle thoroughly  
after off-road use, especially cleaning  
the bottom of the vehicle.  
roads. You may hurt your arm by a sud  
-
den steering maneuver or from steering  
wheel rebound due to impact with  
objects on the ground. You could lose  
control of the steering wheel.  
僅 Since the driving torque is always  
applied to the 4 wheels, the perfor  
-
mance of the AWD vehicle is greatly  
5
31  
Driving your vehicle  
All Wheel Drive (AWD) system  
affected by the condition of the tires.  
Be sure to equip the vehicle with four  
tires of the same size and type.  
to ensure safe driving (wheel-slip pre  
-
vention).  
僅 Keep sufficient distance between your  
vehicle and the vehicle in front of you.  
僅 Reduce vehicle speed and always  
check the road condition.  
僅 Avoid speeding, rapid acceleration,  
sudden brake applications, and sharp  
turns to prevent getting stuck.  
僅 A full time All Wheel Drive vehicle can  
not be towed by an ordinary tow  
truck. Make sure that the vehicle is  
-
placed on a flat bed truck for moving.  
WARNING  
All Wheel Drive (AWD) driving  
僅 Avoid high cornering speed.  
僅 Do not make quick steering wheel  
movements, such as sharp lane  
changes or fast, sharp turns.  
僅 The risk of rollover is greatly  
increased if you lose control of your  
vehicle at high speed.  
僅 When the vehicle is stuck in snow,  
sand or mud, the tires may not oper  
-
ate. This is to protect the transmission  
and not a malfunction.  
NOTICE  
Moving the vehicle forcibly to get out of  
mud or sand can cause damage/over  
-
heat of the engine or damage/break  
-
僅 In a collision, an unbelted person is  
down of the transmission, differential or  
AWD system as well as damage to tires.  
If excessive wheel slip occurs after  
significantly more likely to die com  
-
pared to a person wearing a seat belt.  
entering a sandy/muddy road, the vehi  
-
僅 Loss of control often occurs if two or  
more wheels drop off the roadway,  
and the driver oversteers to re-enter  
the roadway. In the event your vehicle  
leaves the roadway, do not steer  
sharply. Instead, slow down before  
pulling back into the travel lanes.  
cle may fall into the sand/mud. When it  
happens, put a stone or a tree branch  
under the tire, and then try to pull out  
the vehicle, or try to get it unstuck by  
repeatedly moving forwards and back  
-
wards.  
CAUTION  
Mud or snow  
Transmission overheated  
If one of the front or rear wheels begins  
to spin in mud, snow, etc., the vehicle  
can sometimes be driven out by engag  
-
ing the accelerator pedal further; how  
ever, avoid running the engine  
-
continuously at high rpm because doing  
so could damage the AWD system.  
Driving in sand or mud  
僅 Maintain slow and constant speed.  
Operate the accelerator pedal slowly  
OMQ4050023L  
5
32  
Driving your vehicle  
All Wheel Drive (AWD) system  
Tire precautions  
Always pay attention to tires for AWD  
(all-wheel drive) vehicles.  
When driving in all-wheel drive, driving  
force is applied to all tires, and the driv  
ing performance of the vehicle is greatly  
affected by the degree of tire wear:  
-
僅 When replacing tires, be sure to equip  
all four tires with the same size, type,  
tread, brand and load-carrying capac  
-
-
ity. Do not use tire and wheel with dif  
ferent size and type from the one  
originally installed on your vehicle. It  
OMQ4050032L  
僅 When driving on muddy and sandy  
roads under the severe condition, the  
transmission could be overheated.  
僅 When the transmission is overheated,  
the safe protection mode engages  
and the "Transmission Hot! Park with  
engine on" warning message will  
appear on the LCD display with a  
chime.  
can affect the safety and perfor  
-
mance of your vehicle, which could  
lead to steering failure or rollover  
causing serious injury.  
僅 Replace the front and rear tire posi  
-
tions every 10,000 km (6,000 miles).  
5
僅 Each tire should be checked monthly  
when cold and inflated to inflation  
pressure recommended by the vehi  
cle manufacturer on the vehicle plac  
ard or tire inflation pressure label.  
僅 For AWD (all-wheel drive) vehicles,  
install the chains on the front wheels.  
However, this may damage the AWD  
system, so keep the travel distance as  
short as possible.  
僅 If this occurs, pull over to a safe loca  
-
-
tion, stop the vehicle with the engine  
running, apply the brakes and shift  
the vehicle to P (Park), and allow the  
transmission to cool.  
-
僅 If you ignore this warning, the driving  
condition may become worse. You  
may experience abrupt shifts, fre  
-
quent shifts, or jerkiness. To return to  
the normal driving condition, stop the  
vehicle and apply the foot brake or  
shift into P (Park). Then allow the  
transmission to cool for a few minutes  
with engine on, before driving off.  
Towing precautions  
AWD vehicle  
僅 When the message "Trans cooled.  
Resume driving" appears you can  
continue to drive your vehicle.  
If the warning messages in the LCD dis  
-
OMQ4060015  
play continue to blink, for your safety,  
have the system checked by an autho  
-
rized Kia dealer.  
5
33  
Driving your vehicle  
All Wheel Drive (AWD) system  
FWD vehicle  
vehicle to go off the jack and to jump  
forward.  
僅 Full-time AWD vehicles must be  
tested on a special four wheel chassis  
dynamometer.  
OMQ4060016  
NOTICE  
The AWD vehicle should never be towed  
with the wheels on the ground. Your  
vehicle must be towed with a wheel lift  
and dollies or flatbed equipment with all  
the wheels off the ground.  
* Refer to "Trailer towing (if equipped)"  
on page 5-191.  
Never engage the parking brake while  
performing these tests.  
僅 A full-time AWD vehicle should not be  
tested on a FWD roll tester. If a FWD  
roll tester must be used, perform the  
following:  
CAUTION  
The AWD vehicle cannot be towed with  
sling-type equipment. Use wheel lift or  
flatbed equipment.  
WARNING  
Your vehicle is equipped with tires  
designed to provide safe ride and han  
-
dling capability. Do not use tires and  
wheels that are different in size and type  
from the originally installed ones. It can  
affect the safety and performance of  
OMQ4050041  
[A]: Roll tester  
[B]: Temporary free roller  
your vehicle, which could lead to steer  
-
ing failure or rollover and serious injury.  
When replacing the tires, be sure to  
equip all four tires with the tire and  
wheel of the same size, type, tread,  
brand and load-carrying capacity.  
1. Check the tire pressures recom  
-
mended for your vehicle.  
2. Place the front wheels on the roll tes  
ter (A) for a speedometer test.  
3. Release the parking brake.  
-
4. Place the rear wheels on the tempo  
-
WARNING  
rary free roller (B).  
Jacked vehicle  
WARNING  
Dynamometer testing  
Keep away from the front of the vehicle  
while the vehicle is in gear on the dyna  
mometer. This is very dangerous as the  
While the full-time AWD vehicle is being  
raised on a jack, never start the engine  
or cause the tires to rotate.  
There is the danger that rotating tires  
touching the ground could cause the  
-
5
34  
Driving your vehicle  
Brake system  
vehicle can jump forward and cause  
serious injury or death.  
Brake system  
Your vehicle has power-assisted brakes,  
parking brake, and various braking sys  
tems for safe driving.  
-
CAUTION  
僅 When lifting up the vehicle, do not  
operate front and rear wheel, sepa  
Power brakes  
-
Your vehicle has power-assisted brakes  
rately. All four wheels should be oper  
-
that adjust automatically through nor  
mal usage.  
In the event that the power-assisted  
-
ated.  
僅 If you need to operate the front wheel  
and rear wheel when lifting up the  
vehicle, you should release the park  
ing brake.  
brakes lose power because of a stalled  
engine or some other reason, you can  
still stop your vehicle by applying  
-
greater force to the brake pedal than  
you normally would. The stopping dis  
-
tance, however, will be longer.  
When the engine is not running, the  
reserve brake power is partially depleted  
each time the brake pedal is applied. Do  
not pump the brake pedal when the  
power assist has been interrupted.  
5
Pump the brake pedal only when neces  
-
-
sary to maintain steering control on slip  
pery surfaces.  
NOTICE  
僅 When stepping on the brake pedal  
under a certain driving or weather  
condition, you may witness your car  
make a sound of squealing or some  
other noises. This is not a brake mal  
-
function but a normal phenomenon.  
僅 When driving on the road to which  
deicing chemicals are applied, vehicle  
noises may occur from the brake or  
abnormal abrasion of tires because of  
such deicing chemicals. You should  
operate additional braking so that you  
would be able to remove the deicing  
chemicals on the brake disk and pad  
under a safe traffic condition.  
5
35  
Driving your vehicle  
Brake system  
den loss of control of the vehicle. If you  
must use the parking brake to stop the  
vehicle, use great caution in applying the  
brake.  
CAUTION  
Brake pedal  
Do not drive with your foot resting on  
the brake pedal. This will create abnor  
mally high brake temperatures which  
can cause excessive brake lining and  
pad wear.  
-
Brake Over Accelerator  
In the event the accelerator pedal  
becomes stuck or entrapped, apply  
steady and firm pressure to the brake  
pedal to slow the vehicle and reduce  
engine power.  
WARNING  
Steep hill braking  
If you experience this condition, take the  
following steps:  
Avoid continuous application of the  
brakes when descending a long or steep  
hill by shifting to a lower gear. Continu  
ous brake application will cause the  
brakes to overheat and could result in a  
temporary loss of braking performance.  
-
1. Apply the brakes and bring your vehi  
-
cle to a safe stop.  
2. Move the transmission to P (Park),  
switch the engine off and apply the  
parking brake.  
3. Inspect the accelerator pedal for any  
interference.  
Wet brakes may impair the vehicle's abil  
ity to safely slow down; the vehicle may  
also pull to one side when the brakes are  
applied. Applying the brakes lightly will  
indicate whether they have been  
affected in this way. Always test your  
brakes in this fashion after driving  
through deep water. To dry the brakes,  
apply them lightly while maintaining a  
safe forward speed until brake perfor  
mance returns to normal.  
-
If none are found and the condition per  
sists, have your vehicle towed to an  
authorized Kia dealer.  
-
Disc brakes wear indicator  
When your brake pads are worn and  
new pads are required, you will hear a  
high-pitched warning sound from your  
front brakes or rear brakes. You may  
hear this sound come and go or it may  
occur whenever you press the brake  
pedal.  
-
In the event of brake failure  
If service brakes fail to operate while the  
vehicle is in motion, you can make an  
emergency stop with the parking brake.  
The stopping distance, however, will be  
much greater than normal.  
Always replace the front or rear brake  
pads as pairs.  
CAUTION  
Replace brake pads  
WARNING  
Parking brake  
Do not continue to drive with worn brake  
pads. Continuing to drive with worn  
Avoid applying the parking brake to stop  
the vehicle while it is moving except in  
an emergency situation. Applying the  
parking brake while the vehicle is mov  
ing at normal speeds can cause a sud  
brake pads can damage the braking sys  
tem and result in costly brake repairs.  
-
-
-
5
36  
Driving your vehicle  
Brake system  
in an emergency situation. It could dam  
age the brake system and lead to an  
accident.  
-
WARNING  
Brake wear  
Do not ignore high pitched wear sounds  
from your brakes. If you ignore this audi  
ble warning, you will eventually lose  
braking performance, which could lead  
to a serious accident.  
-
Releasing the parking brake  
NOTICE  
Brake dust may accumulate on the  
wheels, even under normal driving con  
-
ditions. Some dust is inevitable as the  
brakes wear and contribute to brake  
noise.  
OMQ4070090L  
Parking brake (foot type) (if  
equipped)  
To release the parking brake:  
1. Firmly depress the brake pedal.  
2. Depress the parking brake pedal  
5
Applying the parking brake  
down and it will release automatically.  
If the parking brake does not release or  
does not release all the way, have your  
vehicle checked by an authorized Kia  
dealer.  
WARNING  
僅 Whenever leaving the vehicle or park  
ing, always come to a complete stop  
and continue to depress the brake  
-
pedal. Make sure the gear is shifted to  
OMQ4070008  
P (Park) position, then apply the park  
ing brake, and place the ignition  
-
Always set the parking brake before  
leaving the vehicle.  
To apply the parking brake:  
switch or ENGINE START/STOP but  
-
ton in the LOCK/OFF position.  
1. Firmly depress the brake pedal.  
Vehicles with the parking brake not  
fully engaged are at risk for moving  
inadvertently and causing injury to  
yourself or others.  
2. Depress the parking brake pedal  
down as far as possible.  
WARNING  
To reduce the risk of SERIOUS INJURY  
or DEATH, do not operate the parking  
brake while the vehicle is moving except  
僅 NEVER allow anyone who is unfamil  
-
-
iar with the vehicle to touch the park  
ing brake. If the parking brake is  
5
37  
Driving your vehicle  
Brake system  
released unintentionally, serious  
injury may occur.  
僅 Only release the parking brake when  
you are seated inside the vehicle with  
your foot firmly on the brake pedal.  
engine is running, there may be a mal  
-
function in the brake system. Immediate  
attention is necessary.  
If at all possible, cease driving the vehi  
cle immediately. If that is not possible,  
-
use extreme caution while operating the  
vehicle and only continue to drive the  
vehicle until you can reach a safe loca  
tion or repair shop.  
NOTICE  
-
僅 Do not apply the accelerator pedal  
while the parking brake is engaged. If  
you depress the accelerator pedal  
with the parking brake engaged, a  
warning will sound. Damage to the  
parking brake may occur.  
僅 Driving with the parking brake on can  
overheat the braking system and  
cause premature wear or damage to  
brake parts. Make sure the parking  
Electronic Parking Brake (EPB) (if  
equipped)  
After parking the vehicle, apply a Elec  
-
tronic Parking Brake (EPB) to prevent a  
vehicle from being moved by the exter  
nal force.  
-
Applying the parking brake  
brake is released and the Brake Warn  
ing Light is off before driving.  
-
Applying the parking brake with  
EPB switch  
WARNING  
僅 Never allow a passenger to touch the  
parking brake. If the parking brake is  
released unintentionally, serious  
injury may occur.  
Check the brake warning light by turn  
-
OMQ4A050025  
ing the ignition switch or ENGINE  
1. Depress the brake pedal.  
2. Pull up the EPB switch.  
Make sure the warning light comes on.  
Also, the EPB is applied automatically if  
the Auto Hold button is on when the  
vehicle is turned off. In addition, if you  
pull up the EPB switch after the vehicle  
is turned off, the EPB will be applied.  
START/STOP button to ON (do not start  
the engine). This light will be illuminated  
when the parking brake is applied with  
the ignition switch or ENGINE START/  
STOP button in the START or ON posi  
-
tion.  
Before driving, be sure the parking  
brake is fully released, and the brake  
warning light is off.  
If the brake warning light remains on  
after the parking brake is released while  
5
38  
Driving your vehicle  
Brake system  
僅 Conditions below while AUTO HOLD  
is activated  
- Driver's door is opened  
- Hood is opened  
WARNING  
Never leave children and animals unat  
tended in the vehicle. If you leave chil  
dren unaccompanied in the vehicle, they  
may be able to set the vehicle in motion,  
for example by:  
僅 Releasing the parking brake.  
僅 Shifting the transmission out of P  
(Park) position.  
-
-
- Liftgate is opened  
- Vehicle stops for more than  
approximately 10 minutes on a  
steep slope  
僅 Requested by other systems  
僅 Starting the engine.  
In addition, they may operate vehicle  
equipment.  
NOTICE  
For Electronic Parking Brake (EPB)  
equipped vehicles with AUTO HOLD  
function used while driving, if the  
ENGINE START/STOP button has been  
turned OFF, the EPB will be engaged  
automatically. Therefore,  
AUTO HOLD function should be turned  
off before the ENGINE START/STOP  
button is turned off.  
NOTICE  
On a steep incline or when pulling a  
trailer, if the vehicle does not remain at a  
standstill, do as follows:  
1. Apply the EPB.  
2. Pull up the EPB switch for more than 3  
seconds.  
5
Emergency braking with the EPB  
switch  
If there is a problem with the brake  
pedal while driving, emergency braking  
is possible by pulling up and holding the  
EPB switch.  
Do not operate the EPB while the vehicle  
is moving except in an emergency situa  
-
tion.  
NOTICE  
A click or electric brake motor whine  
sound may be heard while operating or  
releasing the EPB.  
These conditions are normal and indi  
cate that the EPB is functioning properly.  
Braking is possible only while you are  
holding the EPB switch.  
WARNING  
Do not operate the Electronic Parking  
Brake (EPB) while the vehicle is moving  
-
except in an emergency situation. Apply  
ing the EPB while the vehicle is moving  
at normal speeds can cause a sudden  
loss of control of the vehicle. If you must  
use the EPB to stop the vehicle, use  
great caution in applying the brake.  
-
Automatic application of EPB  
The EPB is applied automatically under  
the following conditions:  
僅 Shift to P (Park) on a slope  
僅 Engine OFF while AUTO HOLD is  
enabled  
僅 When the vehicle moves a bit in P  
(Park) position  
5
39  
Driving your vehicle  
Brake system  
僅 Gear in N (Neutral)  
NOTICE  
During emergency braking by the EPB,  
the parking brake warning light will illu  
minate to indicate that the system is  
operating.  
- Withe the engine running, engage  
the brake pedal and shift out of N  
(Neutral) to R (Reverse) or D  
(Drive).  
僅 Automatic transmission  
1. Start the engine.  
2. Fasten the driver's seat belt.  
3. Close the driver's door, hood and  
liftgate.  
-
If you notice a continuous noise or burn  
-
-
ing smell when the EPB is used for emer  
gency braking, have your vehicle  
checked by an authorized Kia dealer.  
4. Press the accelerator pedal while  
the gear is in R (Rear), D (Drive) or  
Sports mode.  
Releasing the parking brake with  
EPB switch  
Make sure the brake warning light goes  
off.  
NOTICE  
僅 For your safety, you can engage the  
EPB even though the ENGINE START/  
STOP button is in the OFF position,  
but you cannot release it.  
僅 For your safety, press the brake pedal  
and release the parking brake manu  
-
ally with the EPB switch when you  
OMQ4A050047  
drive downhill or when backing up the  
vehicle.  
Do not follow the above procedure when  
Releasing the parking brake with EPB  
switch,  
1. Have the ENGINE START/STOP but  
ton in the ON position.  
2. Press the brake pedal.  
3. Press the EPB switch.  
4. Make sure the brake warning light  
goes off.  
-
driving on a flat level ground. The vehi  
-
cle may suddenly move forward.  
NOTICE  
If the parking brake warning light is still  
on even though the EPB has been  
released, have the system checked by  
an authorized Kia dealer.  
Automatic release of EPB (if SBW  
not equipped)  
The EPB is released automatically under  
following conditions.  
僅 Gear in P (Park)  
- With the engine running, engage  
the brake pedal and shift out of P  
(Park) to R (Reverse) or D (Drive).  
CAUTION  
Do not drive your vehicle with the EPB  
applied. It may cause excessive brake  
pad and brake rotor wear.  
5
40  
Driving your vehicle  
Brake system  
僅 A click or electric brake motor whine  
sound may be heard while operating  
or releasing the EPB. These conditions  
are normal and indicate that the EPB  
is functioning properly.  
EPB warning  
The EPB will display a warning message  
with sound under certain conditions.  
僅 If you try to drive off while engaging  
the accelerator pedal with the EPB  
applied, but the EPB doesn't release  
automatically, a warning will sound  
and a message will appear.  
僅 When leaving your keys with a park  
-
ing lot attendant or valet, make sure  
to inform him/her how to operate the  
EPB.  
僅 If the driver's seat belt is not fastened  
and the vehicle hood, driver's door or  
liftgate is opened, a warning will  
僅 The EPB may malfunction if you drive  
with the EPB applied.  
僅 When you automatically release EPB  
by pressing the accelerator pedal,  
press it slowly.  
sound and a message will appear.  
When the conversion from Auto Hold to  
EPB is not working properly a warning  
will sound and a message will appear.  
5
OMQ4AH050049  
僅 If there is a problem with the vehicle, a  
warning may sound and a message  
may appear.  
If the above situation occurs, press the  
brake pedal and release EPB by pressing  
the EPB switch.  
OMQ4050056L  
NOTICE  
Engage the brake pedal when the above  
message appears for the Auto Hold and  
EPB may not activate.  
WARNING  
Parking Brake Use  
僅 Never allow a passenger to touch the  
parking brake. If the parking brake is  
released unintentionally, serious  
injury may occur.  
僅 All vehicles should always have the  
parking brake fully engaged when  
parked to avoid inadvertent move  
If the EPB is applied while Auto Hold is  
activated because of an Electronic Sta  
-
bility Control (ESC) signal, a warning will  
sound and a message will appear.  
-
ment of the vehicles which can injure  
occupants or pedestrians.  
5
41  
Driving your vehicle  
Brake system  
NOTICE  
The EPB warning light may illuminate if  
the EPB switch operates abnormally.  
Shut the engine off and turn it on again  
after a few minutes. The warning light  
will go off and the EPB switch will oper  
-
-
ate normally. However, if the EPB warn  
ing light is still on, have the system  
checked by an authorized Kia dealer.  
If the parking brake warning light does  
not illuminate or blinks even though the  
EPB switch was pulled up, the EPB is not  
applied.  
OMQ4050054L  
EPB malfunction indicator  
This warning light illuminates if the  
ENGINE START/STOP button is changed  
to the ON position and goes off in  
approximately 3 seconds if the system is  
operating normally.  
If the parking brake warning light blinks  
when the EPB warning light is on, press  
the EPB switch, then pull it up. Once  
more press it back to its original position  
and pull it back up. If the EPB warning  
does not go off, have the system  
checked by an authorized Kia dealer.  
When the EPB is not released  
If the EPB does not release normally,  
take your vehicle to an authorized Kia  
dealer by loading the vehicle on a flat  
bed tow truck and have the system  
checked.  
-
AUTO HOLD (if equipped)  
OMQ4050050  
The Auto Hold is designed to maintain  
the vehicle in a standstill even though  
the brake pedal is not pressed after the  
driver brings the vehicle to a complete  
stop by pressing the brake pedal.  
If the EPB malfunction indicator remains  
on, comes on while driving, or does not  
come on when the ENGINE START/  
STOP button is changed to the ON posi  
tion, this indicates that the EPB may  
have malfunctioned.  
If this occurs, have your vehicle checked  
by an authorized Kia dealer.  
The EPB malfunction indicator may illu  
minate when the ESC indicator comes  
-
Applying Auto Hold function  
1. Press the brake pedal and start the  
vehicle.  
2. Press the Auto Hold button. The white  
AUTO HOLD indicator will come on  
indicating the system is in standby.  
-
on to indicate that the ESC is not work  
ing properly, but it does not indicate a  
malfunction of the EPB.  
-
5
42  
Driving your vehicle  
Brake system  
When driving off from Auto Hold by  
pressing the accelerator pedal, always  
check the surrounding area near your  
vehicle.  
Slowly press the accelerator pedal for a  
smooth launch.  
Canceling Auto Hold function  
OMQ4A050051  
Before the Auto Hold will engage, the  
driver's door and engine hood must  
be closed.  
5
OMQ4A050053  
僅 To cancel the Auto Hold operation,  
press the Auto Hold switch. The AUTO  
HOLD indicator will go out.  
僅 To cancel the Auto Hold operation  
when the vehicle is at a standstill,  
press the Auto Hold switch while  
pressing the brake pedal.  
OMQ4050052  
When coming to a complete stop by  
pressing the brake pedal, the AUTO  
HOLD indicator changes from white to  
green indicating the AUTO HOLD is  
engaged. The vehicle will remain at a  
standstill even if you release the brake  
pedal.  
If EPB is applied, Auto Hold will be  
released.  
If you press the accelerator pedal with  
the gear in D (Drive) or Manual mode,  
the Auto Hold will be released automati  
cally and the vehicle will start to move.  
The indicator changes from green to  
white indicating the Auto Hold is in  
standby and the EPB is released.  
NOTICE  
僅 The following are conditions when the  
Auto Hold will not engage (Auto Hold  
light will not turn green and the Auto  
Hold system remains in stand by):  
- The driver's door is opened  
- The engine hood is opened  
- The gear is in P (Park)  
- The EPB is applied  
僅 For your safety, the Auto Hold auto  
matically switches to EPB under any  
of the following conditions (Auto Hold  
light remains white and the EPB auto  
matically applies):  
- The driver's door is opened.  
-
-
-
5
43  
Driving your vehicle  
Brake system  
- The engine hood is opened.  
- The vehicle is in a standstill for  
more than 10 minutes.  
- The vehicle is standing on a steep  
slope.  
Warning messages  
The Auto Hold function will display a  
warning message with sound under cer  
tain conditions.  
When the EPB is applied from Auto Hold,  
a warning will sound and a message will  
appear.  
-
- The vehicle moved for a few sec  
onds.  
-
In these cases, the brake warning  
light comes on, the AUTO HOLD  
indicator changes from green to  
white, and a warning sounds and a  
message will appear to inform you  
that EPB has been automatically  
engaged. Before driving off again,  
press foot brake pedal, check the  
surrounding area near your vehicle  
and release parking brake manu  
-
ally with the EPB switch.  
OMQ4050054L  
僅 If the AUTO HOLD indicator lights up  
yellow, the Auto Hold is not working  
properly. Take your vehicle and have  
the system checked by an authorized  
Kia dealer.  
When the conversion from Auto Hold to  
EPB is not working properly a warning  
will sound and a message will appear.  
WARNING  
To reduce the risk of an accident, do not  
activate Auto Hold while driving down  
-
hill, backing up, or parking your vehicle.  
If there is a malfunction with the driver's  
door, liftgate or engine hood open  
detection system, the Auto Hold may not  
work properly.  
Take your vehicle and have the system  
checked by an authorized Kia dealer.  
OMQ4050055L  
NOTICE  
When this message is displayed, the  
Auto Hold and EPB may not operate. For  
your safety, press the brake pedal.  
NOTICE  
A click or electric brake motor whine  
sound may be heard while operating or  
releasing the EPB, but these conditions  
are normal and indicate that the EPB is  
functioning properly.  
If you do not apply the brake pedal  
when you release the Auto Hold by  
pressing the [AUTO HOLD] switch, a  
5
44  
Driving your vehicle  
Brake system  
warning will sound and a message will  
appear.  
always maintain a safe distance  
between you and objects ahead. Vehicle  
speeds should always be reduced during  
extreme road conditions. The vehicle  
should be driven at reduced speeds in  
the following circumstances:  
僅 When driving on rough, gravel or  
snow-covered roads  
僅 When driving on roads where the road  
surface is pitted or has different sur  
-
face heights.  
Driving in these conditions increases the  
stopping distance for your vehicle.  
OMQ4050056L  
The ABS continuously senses the speed  
of the wheels. If the wheels are going to  
lock, the ABS repeatedly modulates the  
hydraulic brake pressure to the wheels.  
When you press the [AUTO HOLD]  
switch, if the driver’s door and engine  
hood are not closed, a warning will  
sound and a message will appear on the  
LCD display.  
When you apply your brakes under con  
ditions which may lock the wheels, you  
may hear a "tik-tik'' sound from the  
-
5
brakes, or feel a corresponding sensa  
-
tion in the brake pedal. This is normal  
and it means your ABS is active.  
In order to obtain the maximum benefit  
from your ABS in an emergency situa  
-
tion, do not attempt to modulate your  
brake pressure and do not try to pump  
your brakes. Press your brake pedal as  
hard as possible to allow the ABS to con  
trol the force being delivered to the  
brakes.  
-
OMQ4A051381L  
At this moment, press the [AUTO HOLD]  
button after closing the driver’s door  
and engine hood.  
NOTICE  
A click sound may be heard in the vehi  
cle compartment when the vehicle  
begins to move after the vehicle is  
started. These conditions are normal  
and indicate that the Anti-lock Brake  
System is functioning properly.  
-
Anti-lock Brake System (ABS)  
The Anti-lock Brake System (ABS) pre  
vents the wheels from locking. So the  
-
vehicle remains stable and can still be  
steered.  
ABS (or ESC) will not prevent accidents  
due to improper or dangerous driving  
maneuvers. Even though vehicle control  
is improved during emergency braking,  
Even with the Anti-lock Brake System,  
your vehicle still requires sufficient stop  
-
ping distance. Always maintain a safe  
distance from the vehicle in front of you.  
5
45  
Driving your vehicle  
Brake system  
Always slow down when cornering. The  
Anti-lock Brake System cannot prevent  
accidents resulting from excessive  
speeds.  
僅 Do not pump your brakes!  
僅 Have the battery recharged before  
driving the vehicle.  
On loose or uneven road surfaces, oper  
ation of the Anti-lock Brake System may  
result in a longer stopping distance than  
-
Electronic Stability Control (ESC)  
system  
The Electronic Stability Control (ESC) is  
designed to stabilize the vehicle during  
cornering maneuvers.  
for vehicles equipped with a conven  
-
tional brake system.  
The ABS warning light will stay on for  
approximately 3 seconds after the  
ENGINE START/STOP button is ON.  
During that time, the ABS will go through  
self-diagnosis and the light will go off if  
everything is normal. If the light stays on,  
you may have a problem with your ABS.  
Contact and visit an authorized Kia  
dealer.  
When you drive on a road having poor  
traction, such as an icy road, and have  
operated your brakes continuously, the  
ABS will be active continuously and the  
ABS warning light may illuminate. Pull  
your vehicle over to a safe place and  
stop the vehicle.  
OMQ4A051058  
ESC applies the brakes on individual  
wheels and intervenes with the vehicle  
management system to stabilize the  
vehicle.  
ESC will not prevent accidents. Excessive  
speed in turns, abrupt maneuvers and  
hydroplaning on wet surfaces can still  
result in serious accidents.  
Only a safe and attentive driver can pre  
vent accidents by avoiding maneuvers  
that cause the vehicle to lose traction.  
Even with ESC installed, always follow all  
the normal precautions for driving -  
including driving at safe speeds for the  
conditions.  
Restart the vehicle. If the ABS warning  
light goes off, then your ABS is normal.  
Otherwise, you may have a problem  
-
with the ABS. Contact and visit an autho  
-
rized Kia dealer.  
NOTICE  
When you jump start your vehicle  
because of a drained battery, the vehicle  
may not run as smoothly and the ABS  
warning light may turn on at the same  
WARNING  
For maximum protection, always wear  
your seat belt. No system, no matter  
how advanced, can compensate for all  
time. This happens because of low bat  
-
tery voltage. It does not mean your ABS  
has malfunctioned.  
5
46  
Driving your vehicle  
Brake system  
driver error and/or driving conditions.  
Always drive responsibly.  
僅 When starting the vehicle, you may  
hear a slight ticking sound. This is the  
ESC performing an automatic system  
self-check and does not indicate a  
problem.  
The ESC system is an electronic system  
designed to help the driver maintain  
vehicle control under adverse condi  
-
tions. It is not a substitute for safe driv  
-
When operating  
ing practices. Factors including speed,  
road conditions and driver steering input  
When the ESC is in operation, the  
ESC indicator light blinks.  
can all affect whether ESC will be effec  
tive in preventing a loss of control. It is  
still your responsibility to drive and cor  
ner at reasonable speeds and to leave a  
sufficient margin of safety.  
-
When the Electronic Stability  
Control is operating properly, you can  
feel a slight pulsation in the vehicle. This  
is only the effect of brake control and  
indicates nothing unusual.  
-
When you apply your brakes under con  
ditions which may lock the wheels, you  
may hear a "tik-tik'' sound from the  
-
When moving out of the mud or driving  
on a slippery road, pressing the acceler  
-
ator pedal may not cause the vehicle  
brakes, or feel a corresponding sensa  
-
rpm (revolutions per minute) to increase.  
tion in the brake pedal. This is normal  
and it means your ESC is active.  
5
ESC operation off  
NOTICE  
This vehicle has 2 kinds of ESC off  
countries.  
If the vehicle stops when ESC is  
off, ESC remains off. Upon restarting the  
vehicle, the ESC will automatically turn  
on again.  
A click sound may be heard in the vehi  
cle compartment when the vehicle  
begins to move after the vehicle is  
started. These conditions are normal  
and indicate that the Electronic Stability  
Control system is functioning properly.  
-
ESC operation  
ESC ON condition  
僅 When the ENGINE START/STOP but  
ton is turned ON, ESC and ESC OFF  
-
indicator lights illuminate for approxi  
-
mately 3 seconds, then ESC is turned  
on.  
OMQ4050059L  
僅 Press the ESC OFF button for at least  
half a second after turning the vehicle  
ESC off state 1  
ON to turn ESC off. (ESC OFF indica  
-
tor will illuminate). To turn the ESC on,  
press the ESC OFF button (ESC OFF  
indicator light will go off).  
To turn off the traction control function  
and only operate the brake control func  
-
tion of the ESC, press the ESC OFF but  
-
5
47  
Driving your vehicle  
Brake system  
nates, then goes off if the ESC system is  
operating normally.  
The ESC indicator light blinks whenever  
ESC is operating or illuminates when  
ESC fails to operate.  
ton (ESC OFF  
) for less than 3  
seconds and the ESC OFF indicator light  
(ESC OFF  
) will illuminate.  
The ESC OFF indicator light comes on  
when the ESC is turned off with the but  
-
ton.  
WARNING  
Electronic Stability Control  
Drive carefully even though your vehicle  
has Electronic Stability Control. It can  
only assist you in maintaining control  
under certain circumstances.  
OMQ4050060L  
ESC OFF usage  
When driving  
僅 ESC should be turned on for daily  
driving whenever possible.  
僅 To turn ESC off while driving, press  
the ESC OFF button while driving on a  
flat road surface.  
ESC off state 2  
To turn off the traction control function  
and the brake control function of the  
ESC, press the ESC OFF button (ESC  
OFF  
) for more than 3 seconds. ESC  
OFF indicator light (ESC OFF  
illuminate and ESC OFF warning chime  
will sound. At this state, the vehicle sta  
bility control function does not operate  
any more.  
) will  
WARNING  
Operating ESC  
Never press the ESC OFF button while  
ESC is operating (ESC indicator light  
blinks).  
-
Indicator light  
If ESC is turned off while ESC is operat  
ing, the vehicle may slip out of control.  
-
ESC indicator light  
NOTICE  
ESC OFF indicator light  
僅 When operating the vehicle on a  
dynamometer, ensure that the ESC is  
turned off (ESC OFF light illuminated).  
If the ESC is left on, it may prevent the  
vehicle speed from increasing, and  
result in false diagnosis.  
When ENGINE START/STOP button is  
turned to ON, the indicator light illumi  
-
5
48  
Driving your vehicle  
Brake system  
僅 Turning the ESC off does not affect  
ABS or brake system operation.  
The system automatically applies the  
brakes to maintain the vehicle speed 4  
km/h (2.5mph) ~ 40 km/h (25 mph) and  
allows the driver to concentrate on  
steering the vehicle down hill.  
Downhill Brake Control (DBC)  
Always turn off the DBC on normal  
roads. The DBC might activate inadver  
-
tently from the stand by mode when  
driving through speed bumps or making  
sharp curves.  
NOTICE  
The DBC defaults to the OFF position  
whenever the ignition switch or ENGINE  
START/STOP button is placed in the ON  
position.  
OMQ4A050061  
Noise or vibration may occur from the  
brakes when the DBC is activated.  
The rear stop light comes on when DBC  
is activated.  
The Downhill Brake Control (DBC) fea  
ture assists the driver to descend down a  
steep hill without having to depress the  
brake pedal.  
-
5
DBC operation  
Mode  
Indicator light  
Description  
Press the DBC button when vehicle speed is under 60 km/h (38  
mph). The DBC system will turn ON and enter the standby mode.  
The system does not turn ON if vehicle speed is over 60 km/h  
(38 mph).  
Standby  
illuminated  
In the standby mode, It enters the operating mode when the fol  
-
lowing conditions are met.  
The road surface should be more than a certain angle of incli  
-
nation  
The accelerator pedal must not be depressed.  
The vehicle speed should be within 4 km/h (2.5 mph) ~ 40  
km/h (25 mph)  
Activated  
blinks  
-
2.5 km/h (1.5 mph) ~ 8 km/h (5 mph) in case of backward  
movement  
Within operating vehicle speed 4 km/h (2.5 mph) ~ 40 km/h (25  
mph), the driver can lower or raise the vehicle speed by stepping  
on the brake pedal or accelerator pedal.  
5
49  
Driving your vehicle  
Brake system  
Mode  
Indicator light  
illuminated  
Description  
In the activated mode, the DBC will temporarily deactivate under  
the following conditions:  
The hill is not steep enough.  
The accelerator pedal is depressed.  
When the vehicle speed is in the range of 40 km/h (25 mph) ~  
Temporarily  
deactivated  
60 km/h (38 mph)  
If the above conditions are not met, the DBC will automatically  
activate again.  
The DBC will turn OFF under the following conditions:  
The DBC button is pressed again.  
When the accelerator pedal is depressed and the vehicle  
speed exceeds 60 km/h (38 mph)  
OFF  
not illuminated  
off always engaged the accelerator  
pedal.  
NOTICE  
If the DBC yellow indicator light illumi  
nates, the system may have overheated  
or have malfunctioned. When the warn  
ing light illuminates even though the  
DBC system has cooled off, have your  
vehicle checked by an authorized Kia  
dealer as soon as possible.  
-
WARNING  
Maintaining brake pressure on incline  
HAC does not replace the need to apply  
brakes while stopped on an incline.  
While stopped, make sure you maintain  
brake pressure sufficient to prevent your  
vehicle from rolling backward and caus  
ing an accident. Don't release the brake  
pedal until you are ready to accelerate  
forward.  
-
-
NOTICE  
僅 The DBC may not deactivate on steep  
inclines even though the brake or  
accelerator pedal is depressed.  
Vehicle Stability Management  
(VSM) system  
僅 The DBC does not operate when:  
- The gear is in P (Park).  
The Vehicle Stability Management (VSM)  
system provides further enhancements  
to vehicle stability and steering  
- The ESC is activated.  
Hill-start Assist Control (HAC)  
responses under the following condition:  
A vehicle has the tendency to roll back  
on a steep hill when it starts to go after  
stopping. The Hill-start Assist Control  
(HAC) prevents the vehicle from rolling  
僅 when driving on a slippery road or  
僅 when a change in the coefficient of  
friction between left and right wheels  
is detected.  
back by applying the brakes automati  
cally for about 2 seconds.  
The brakes are released when the accel  
erator pedal is engaged or after about 2  
seconds.  
-
WARNING  
Tire/wheel size  
When replacing tires and wheels, make  
-
sure they are the same size as the origi  
nal tires and wheels installed. Driving  
with varying tire or wheel sizes may  
-
The HAC is activated only for about 2  
seconds, so when the vehicle is starting  
5
50  
Driving your vehicle  
Brake system  
diminish any supplemental safety bene  
-
Malfunction indicator  
The VSM can be deactivated even if you  
don't cancel the VSM operation by  
fits of the VSM system.  
pressing the ESC OFF button. It indicates  
that a malfunction has been detected  
somewhere in the Electric Power Steer  
ing system or VSM system. If the ESC  
VSM operation  
-
When the VSM is operating properly,  
you can feel a slight pulsation in the  
vehicle and/or abnormal steering  
responses (Electric Power Steering  
(EPS)). This is only the effect of brake  
and EPS control and indicates nothing  
unusual.  
indicator light (  
) or EPS warning light  
remains on, take your vehicle and have  
the system checked by an authorized  
Kia dealer.  
The VSM is not a substitute for safe driv  
-
-
ing practices but a supplementary func  
The VSM does not operate when:  
僅 Driving on a sloping road such as a  
gradient or incline  
tion only. It is the responsibility of the  
driver to always check the speed and the  
distance to the vehicle ahead. Always  
僅 Driving in reverse  
hold the steering wheel firmly while driv  
ing.  
-
僅 ESC OFF indicator light (  
on the instrument cluster  
僅 EPS indicator light remains on the  
instrument cluster  
) remains  
5
Your vehicle is designed to activate  
according to the driver's intention, even  
with installed VSM. Always follow all the  
normal precautions for driving at safe  
speeds for the conditions – including  
driving in clement weather and on a slip  
pery road.  
-
VSM operation off  
If you press the ESC OFF button to turn  
off the ESC, the VSM will also cancel and  
WARNING  
For maximum protection, always wear  
your seat belt. No system, no matter  
how advanced, can compensate for all  
driver error and/or driving conditions.  
Always drive responsibly.  
the ESC OFF indicator light (  
nates.  
To turn on the VSM, press the button  
again. The ESC OFF indicator light goes  
out.  
) illumi-  
WARNING  
Vehicle Stability Management  
Drive carefully even though your vehicle  
has Vehicle Stability Management. It can  
only assist you in maintaining control of  
the vehicle under certain circumstances.  
Trailer Stability Assist (TSA) sys  
tem  
-
The Trailer Stability Assist (TSA) is oper  
-
ated as a vehicle stability control system.  
The TSA is designed to stabilize the vehi  
cle and trailer when the trailer sways or  
oscillates. There are various factors that  
make the vehicle sway or oscillate.  
-
Such incidents mostly happen at high  
speed, but there is also a risk of swaying  
5
51  
Driving your vehicle  
Brake system  
when the trailer is affected by cross  
-
僅 The brake pedal is depressed over a  
certain condition.  
僅 The friction of the road surface is  
below a certain level.  
winds, buffeting, or improper overload  
-
ing.  
Factors of swaying such as:  
僅 High speed  
僅 Strong crosswinds  
僅 Improper overloading  
僅 Sudden controlling of steering wheel  
僅 Uneven road  
WARNING  
The system may not operate depending  
on driver's driving habits, the degree to  
which the brake pedal is depressed and  
the road surface condition.  
The TSA continuously analyzes the vehi  
cle and trailer instability. When the TSA  
detects some sway, the brakes are  
applied automatically to stabilize the  
-
Good braking practices  
Good braking practices help keep occu  
-
pants safe and extend brake life.  
vehicle. When the vehicle becomes sta  
-
僅 Check to be sure the parking brake is  
not engaged, and the parking brake  
indicator light is out before driving  
away.  
僅 Driving through water may get the  
brakes wet. They can also get wet  
when the vehicle is washed. Wet  
brakes can be dangerous! Your vehi  
cle will not stop as quickly if the  
brakes are wet. Wet brakes may  
cause the vehicle to pull to one side.  
ble, the TSA does not operate.  
Brake Assistant System (BAS)  
The Brake Assistant System provides  
additional pressure when the brake  
pedal is momentarily and strongly  
depressed in a situation where sudden  
braking is required while driving.  
The Brake Assistant System reduces the  
time for ABS (Anti-Lock Brake System)  
control to enter and consequently  
-
reduces the braking distance, by provid  
ing additional pressure up to the point of  
ABS intervention.  
-
To dry the brakes, apply the brakes  
lightly until the braking action returns  
to normal, taking care to keep the  
vehicle under control at all times. If  
the braking action does not return to  
normal, stop as soon as it is safe to do  
so and visit an authorized Kia dealer.  
BAS operation  
僅 When the vehicle speed is more than  
30 km/h (20 mph) and the ABS con  
trol is not entered.  
-
僅 Don't coast down hills with the vehicle  
out of gear. This is extremely hazard  
ous. Keep the vehicle in gear at all  
times, use the brakes to slow down,  
-
僅 When the brake pedal is depressed  
strongly over a certain level.  
僅 When the friction of the road surface  
is above a certain level.  
then shift to a lower gear so that vehi  
cle braking will help you maintain a  
safe speed.  
-
僅 Don't "ride" the brake pedal. Resting  
your foot on the brake pedal while  
driving can be dangerous because the  
brakes might overheat and lose their  
BAS operation off  
僅 The vehicle speed is below 10 km/h (6  
mph).  
5
52  
Driving your vehicle  
Vehicle Auto Shut-off system  
effectiveness. It also increases the  
wear of the brake components.  
Vehicle Auto Shut-off system  
(if equipped)  
The vehicle auto shut-off system is  
designed to automatically shut off the  
vehicle after a certain time the driver  
sets to reduce fuel consumption and  
energy consumption of the vehicle and  
僅 If a tire goes flat while you are driving,  
apply the brakes gently and keep the  
vehicle pointed straight ahead while  
you slow down. When you are moving  
slowly enough for it to be safe to do  
so, pull off the road and stop in a safe  
place.  
僅 Be cautious when parking on a hill.  
Firmly engage the parking brake and  
place the shift lever in P. If your vehi  
cle is facing downhill, turn the front  
to prevent carbon monoxide (CO) poi  
-
soning.  
-
wheels into the curb to help keep the  
vehicle from rolling.  
If your vehicle is facing uphill, turn the  
front wheels away from the curb to  
help keep the vehicle from rolling. If  
there is no curb or if it is required by  
other conditions to keep the vehicle  
from rolling, block the wheels.  
5
OMQ4A050356  
僅 Under some conditions your parking  
Requirement for activation  
This system can be activated, when all of  
the following requirements are satisfied.  
僅 The ignition switch or ENGINE START/  
STOP button is in ON position.  
僅 The vehicle is in P (Park) position.  
僅 The vehicle stops.  
僅 The vehicle speed is under 3 km/h (2  
mph).  
僅 The driver's seat belt is unfastened.  
僅 The door is opened.  
brake can freeze in the engaged posi  
tion. This is most likely to happen  
when there is an accumulation of  
snow or ice around or near the rear  
brakes or if the brakes are wet. If  
there is a risk that the parking brake  
may freeze, apply it only temporarily  
while you put the shift lever in P  
(Parking) and block the rear wheels so  
the vehicle cannot roll. Then release  
the parking brake.  
-
僅 Do not hold the vehicle on an incline  
with the accelerator pedal. This can  
cause the transmission to overheat.  
Always use the brake pedal or parking  
brake.  
僅 The passenger's seat is not occupied.  
Setting Shut-off Time  
The driver can set the shut-off time on  
the cluster LCD display.  
The option can be found under the fol  
-
lowing menu:  
僅 Go to 'User Settings → Convenience  
→ Vehicle Auto-Shut Off → 60 min./  
5
53  
Driving your vehicle  
Idle Stop and Go (ISG) system  
30 min./Disable' to select the vehicle's  
shut-off time.  
Idle Stop and Go (ISG) system  
The Idle Stop and Go (ISG) system  
reduces fuel consumption by automati  
-
NOTICE  
僅 The default setting will be retained  
until the timer is reset.  
cally shutting down the engine when the  
vehicle is at a standstill. (For example:  
red light, stop sign and traffic jam)  
僅 The timer will revert back to the previ  
-
The engine starts automatically as soon  
as the starting conditions are met.  
The ISG is ON whenever the engine is  
running.  
ous setting at the next startup if the  
driver selects 'Disable' in the User Set  
-
tings mode.  
NOTICE  
NOTICE  
When the engine automatically starts by  
the ISG system, some warning lights  
(ABS, ESC, ESC OFF, EPS or Parking  
brake warning light) may turn on for a  
few seconds.  
This happens because of low battery  
voltage. It does not mean the system has  
malfunctioned.  
僅 The default setting is 30 minutes.  
Resetting the time  
The system can be initialized and  
restarted under the following conditions:  
僅 When pressing and releasing the  
brake pedal.  
僅 When the accelerator pedal is  
depressed.  
僅 When the driver manually resets the  
timer.  
僅 When the driver manually press the  
OK button on the steering wheel.  
Auto stop  
If you depress the brake pedal and the  
vehicle comes to a stop with the ISG ON,  
the engine will stop automatically.  
Stop the vehicle completely by pressing  
the brake pedal when the gear is in the  
D (Drive) or N (Neutral) position.  
Canceling the Vehicle Auto Shut-  
off system  
The system will be canceled automati  
cally when:  
-
僅 The vehicle speed is over 3 km/h (2  
mph).  
僅 The vehicle is shifted to D (Drive), R  
(Reverse) or N (Neutral).  
僅 The driver's seat belt is fastened.  
OMQ4050065  
5
54  
Driving your vehicle  
Idle Stop and Go (ISG) system  
The engine will stop and the green  
chime alarms. When this happens,  
press the brake pedal for auto start.  
AUTO STOP (  
) indicator on the  
instrument cluster will illuminate.  
Auto start  
When the engine stops automatically by  
ISG, the engine will restart if one of the  
following driver actions.  
僅 Release the brake pedal.  
僅 Move the shift gear to the R (Reverse)  
position or the Manual mode while  
depressing the brake pedal.  
OMQ4040520L  
NOTICE  
If you open the engine hood in auto stop  
mode, the following will happen:  
5
僅 The ISG system will deactivate (the  
light on the ISG OFF button will illumi  
-
nate).  
僅 A message will appear on the LCD dis  
play.  
-
OMQ4050265L  
The engine will start and the green  
AUTO STOP indicator (  
) on the  
instrument cluster will go out.  
The engine will also restart auto  
matically without any driver  
actions if the following occurs:  
僅 The brake vacuum pressure is low.  
-
僅 The engine has stopped for about 5  
minutes.  
僅 The air conditioning is ON with the fan  
speed set to the highest position.  
僅 The front defroster is ON.  
僅 The battery is weak.  
OMQ4050062L  
僅 If you shift the gear from N to D (Man  
-
ual mode) or R without depressing the  
brake pedal after stopping engine  
automatically, the engine does not  
restart automatically and a warning  
僅 The cooling and heating performance  
of the climate control system is unsat  
isfactory.  
-
5
55  
Driving your vehicle  
Idle Stop and Go (ISG) system  
僅 The vehicle is shifted to P (Park) when  
Auto Hold is activated.  
Deactivating the ISG  
僅 The door is opened or the seatbelt is  
unfastened when Auto Hold is acti  
vated.  
-
僅 The EPB switch is pressed when Auto  
Hold is activated.  
Operating conditions  
The ISG will operate under the following  
condition:  
僅 The driver's seatbelt is fastened.  
僅 The driver's door and hood are closed.  
OMQ4A040435  
僅 The brake vacuum pressure is ade  
quate.  
僅 The battery sensor is activated and  
the battery is sufficiently charged.  
僅 Outside temperature is not too low or  
too high.  
-
僅 If you wish to deactivate the ISG,  
press the ISG OFF button. The light on  
the ISG OFF button will illuminate.  
僅 If you press the ISG OFF button again,  
the ISG will be activated and the light  
on the ISG OFF button will turn off.  
僅 The vehicle is driven over a constant  
speed and stops.  
ISG malfunction  
僅 The climate control system satisfies  
the conditions.  
僅 The vehicle is sufficiently warmed up.  
僅 The incline is gradual.  
僅 The steering wheel is turned less than  
180 degrees and then the vehicle  
stops.  
NOTICE  
僅 If the ISG system does not meet the  
operation condition, the ISG system is  
deactivated. The light on the ISG OFF  
button will illuminate and a message  
"Auto Stop conditions not met" will  
appear on the LCD display.  
僅 If the light or warning message comes  
on continuously, please check the  
operation condition.  
OMQ4050065  
The ISG may not operate when an ISG  
related sensor or system error occurs.  
The following will happen:  
僅 The yellow AUTO STOP (  
tor on the instrument cluster will stay  
on after blinking for 5 seconds.  
) indica-  
僅 The light on the ISG OFF button will  
illuminate.  
5
56  
Driving your vehicle  
Drive mode integrated control system  
When the engine is in Idle Stop mode, it's  
possible to restart the engine without  
the driver taking any action. Before leav  
ing the vehicle or doing anything in the  
engine compartment, stop the engine by  
the ENGINE START/STOP button to the  
OFF position.  
Drive mode integrated control  
system  
-
Drive mode  
The drive mode may be selected accord  
ing to the driver's preference or road  
condition.  
-
NOTICE  
AWD  
If the AGM battery is reconnected or  
replaced, ISG function will not operate  
immediately. If you want to use the ISG  
function, the battery sensor needs to be  
calibrated for approximately 4 hours  
with the ignition off. After calibration,  
turn the engine on and off 2 or 3 times.  
OMQ4A040320  
FWD  
5
OMQ4050321  
The Drive mode is activated by turning  
the knob.  
NOTICE  
If there is a problem with the instrument  
cluster, the drive mode will be in COM  
-
FORT mode and may not change to ECO  
mode or SPORT mode.  
The mode changes when you toggle the  
DRIVE MODE button.  
5
57  
Driving your vehicle  
Drive mode integrated control system  
Drive Mode  
ECO  
SCC Responsiveness  
Slow  
COMFORT  
Normal  
SMART mode  
AWD  
OMQ4A050287  
When COMFORT mode is selected, it is  
not displayed on the instrument cluster.  
僅 SMART mode:  
SMART mode automatically adjusts  
the driving mode in accordance with  
the driver's driving habits.  
僅 SPORT mode:  
OMQ4A050233  
SPORT mode provides sporty but firm  
riding.  
FWD  
僅 ECO mode:  
ECO mode helps improve fuel effi  
-
ciency for eco-friendly driving.  
僅 COMFORT mode:  
COMFORT mode provides soft driving  
and comfortable riding.  
The drive mode will change to COM  
-
FORT mode when the engine is  
restarted. However, except when it is in  
ECO mode and SMART mode. ECO  
OMQ4A051382L  
mode and SMART mode will be main  
-
SMART mode selects the proper driving  
mode among ECO, COMFORT, and  
SPORT by judging the driver's driving  
habits (i.e., Economic or Aggressive  
(Sportive)) from the brake pedal depres  
sion or the steering wheel operation.  
tained, as selected when the engine is  
restarted.  
When changing the drive mode setting,  
the responsiveness of the Smart Cruise  
Control changes. (If equipped)  
-
僅 Toggle the DRIVE MODE button to  
select SMART mode. When SMART  
Drive Mode  
SMART  
SPORT  
SCC Responsiveness  
Normal  
Fast  
mode is selected, the indicator illumi  
-
nates on the instrument cluster.  
5
58  
Driving your vehicle  
Drive mode integrated control system  
僅 SMART mode automatically controls  
the vehicle driving, such as gear shift  
ing patterns and engine torque, in  
accordance with the driver's driving  
habits.  
SMART ECO mode, when the vehicle  
enters a leveled road.  
-
僅 The driving mode automatically  
changes to SMART SPORT, when you  
abruptly accelerate the vehicle or  
repetitively operate the steering  
wheel. (Your driving is categorized to  
be sporty.) In this mode, your vehicle  
drives in a lower gear for abrupt  
accelerating/decelerating and  
NOTICE  
僅 When you mildly drive the vehicle in  
SMART mode, the driving mode  
changes to ECO mode to improve fuel  
efficiency. However, the actual fuel  
efficiency may differ in accordance  
with your driving situations (i.e.,  
upward/downward slope, vehicle  
deceleration/acceleration).  
increases the engine brake perfor  
mance.  
-
僅 You may still sense the engine brak  
ing performance, even when you  
release the accelerator pedal in  
SMART SPORT mode. It is because  
your vehicle remains in lower gear  
-
僅 When you dynamically drive the vehi  
-
cle in SMART mode by abruptly decel  
erating or sharply turning the driving  
-
over a certain period of time for next  
acceleration. Thus, it is a normal driv  
mode changes to SPORT mode. How  
ever, it may adversely affect fuel  
economy.  
-
-
5
ing situation, not indicating any mal  
-
function.  
僅 The driving mode automatically  
changes to SMART SPORT mode only  
in harsh driving situations. In most of  
the normal driving situations, the driv  
ing mode sets to be either in SMART  
ECO mode or in SMART COMFORT  
mode.  
Various driving situations, which  
you may encounter in SMART  
mode  
僅 The driving mode automatically  
changes to ECO mode after a certain  
period of time, when you gently  
depress the accelerator pedal. (Your  
-
Limitation of SMART mode  
driving is categorized to be eco  
-
The SMART mode may be limited in fol  
-
nomic.)  
lowing situations. (The OFF indicator illu  
minates in those situations.)  
-
僅 The driving mode automatically  
changes from SMART ECO mode to  
SMART COMFORT mode after a cer  
僅 Cruise Control or Smart Cruise Con  
-
-
-
trol is activated:  
tain period of time, when you sharply  
Cruise Control or Smart Cruise Con  
or repetitively depress the accelerator  
pedal.  
僅 The driving mode automatically  
changes to SMART COMFORT mode  
with the same driving patterns, when  
the vehicle starts to drive on an  
trol may deactivate the SMART mode  
when the vehicle is controlled by the  
set speed of Cruise Control or Smart  
Cruise Control. (SMART mode is not  
deactivated just by activating Cruise  
Control or Smart Cruise Control.)  
upward slope of a certain angle. The  
driving mode automatically returns to  
5
59  
Driving your vehicle  
Drive mode integrated control system  
僅 The transmission oil temperature is  
either extremely low or extremely  
high:  
The SMART mode can be active in  
most of the normal driving situations.  
However, an extremely high/ low  
transmission oil temperature may  
temporarily deactivate the SMART  
sion control logic for enhanced driver  
performance.  
僅 When SPORT mode is selected by  
using the DRIVE MODE button, the  
SPORT indicator will illuminate.  
僅 Whenever the engine is restarted, the  
Drive Mode will revert back to COM  
-
FORT mode. If SPORT mode is  
mode, because the transmission con  
dition is out of normal operation con  
dition.  
-
-
desired, re-select SPORT mode from  
the DRIVE MODE button.  
僅 When SPORT mode is activated:  
- The engine rpm will tend to remain  
raised over a certain length of time  
even after releasing the accelerator  
SPORT mode  
AWD  
- Upshifts are delayed when acceler  
-
ating  
NOTICE  
In SPORT mode, the fuel efficiency may  
decrease.  
ECO mode  
AWD  
OMQ4A050256  
FWD  
OMQ4A050232  
OMQ4050258  
SPORT mode manages the driving  
dynamics by automatically adjusting the  
steering effort, the engine and transmis  
-
5
60  
Driving your vehicle  
Drive mode integrated control system  
FWD  
Limitation of ECO mode opera  
tion:  
-
If the following conditions occur while  
ECO mode is operating, the system  
operation is limited even though there is  
no change in ECO indicator.  
僅 When the coolant temperature is low:  
The system will be limited until engine  
performance becomes normal.  
僅 When driving up a hill:  
The system will be limited to gain  
power when driving uphill because  
engine torque is restricted.  
僅 When the accelerator pedal is deeply  
depressed for a few seconds:  
OMQ4050257  
When the Drive Mode is set to ECO  
mode, the engine and transmission con  
trol logic are changed to maximize fuel  
efficiency.  
僅 When the ECO mode is selected by  
using the DRIVE MODE button, the  
ECO indicator will illuminate.  
-
The system will be limited, judging  
that the driver wants to speed up.  
Smart shift on trip computer (if  
equipped)  
Select the Trip Computer mode on the  
instrument cluster LCD display and  
move to the smart shift screen. Then, the  
driver can see the drive mode selected  
5
僅 Whenever the engine is restarted, the  
drive mode remains in ECO mode.  
NOTICE  
Fuel efficiency depends on the driver's  
driving habit and road condition.  
and the drive mode which is automati  
cally switched by the SMART mode.  
-
When ECO mode is activated:  
僅 The acceleration response may be  
slightly reduced as the accelerator  
pedal is depressed moderately.  
僅 The air conditioner performance may  
be limited.  
僅 The shift pattern of the automatic  
transmission may change.  
僅 The engine noise may get louder.  
OMQ4050284L  
The above situations are normal condi  
tions when ECO mode is activated to  
improve fuel efficiency.  
-
The drive mode selected by the driver  
and the driving style gauge showing the  
driver's driving style are displayed on  
the screen.  
5
61  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
Driver's style gauge in SMART  
mode  
Forward Collision-Avoidance  
Assist (FCA) (Front view cam  
era only) (if equipped)  
-
OMQ4A051383L  
OMQ4AH050240  
Forward Collision-Avoidance Assist is  
designed to help detect and monitor the  
vehicle ahead or help detect a pedes  
-
trian in the roadway and warn the driver  
that a collision is imminent with a warn  
ing message and an audible warning,  
-
and if necessary, apply emergency brak  
ing.  
-
OMQ4050286L  
Detecting sensor  
With the standard driving style in the  
center, the left side of the gauge is  
'Econ.' and right side is 'Dynamic' style.  
Front view camera  
When the left side of the driver's style  
gauge is filled up and after a certain  
time passes, the SMART ECO mode is  
activated automatically. When the right  
side of the gauge is filled up and sporty  
driving condition is detected, the SMART  
SPORT mode is activated.  
To maintain the SMART ECO mode for  
fuel efficiency, drive with the left side of  
the gauge filled up.  
OMQ4051078  
5
62  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
from the Settings menu to set whether  
or not to use each function.  
CAUTION  
Take the following precautions to main  
-
-
僅 If 'Active Assist' is selected, the func  
-
tain optimal performance of the detect  
tion will warn the driver with a warn  
-
ing sensor:  
ing message, an audible warning, and  
steering wheel vibration depending  
on the collision risk levels. Braking  
assist will be applied depending on  
the collision risk.  
僅 Never disassemble the detecting sen  
sor or sensor assembly, or apply any  
impact on it.  
僅 Never install any accessories or stick  
ers on the front windshield, or tint the  
front windshield.  
僅 If the detecting sensors have been  
replaced or repaired, have the vehicle  
be inspected by an authorized Kia  
dealer.  
-
-
僅 If 'Warning Only' is selected, the func  
tion will warn the driver with a warn  
-
-
ing message, an audible warning and  
steering wheel vibration depending  
on the collision risk levels. Braking will  
not be assisted.  
僅 Pay extreme caution to keep the front  
view camera dry.  
僅 Never place any reflective objects (i.e.  
僅 If 'Off' is selected, the function will be  
turned off. The(  
)warning light will  
appear on the cluster.  
white paper, mirror) over the dash  
-
-
5
The driver can monitor Forward Colli  
-
board. Any light reflection may pre  
vent the function from functioning  
properly.  
sion-Avoidance Assist ON/OFF status  
from the Settings menu. If the  
(
)warning light remains ON when  
the function is ON, have the function  
inspected by an authorized Kia dealer.  
Forward Collision-Avoidance  
Assist Settings  
WARNING  
Forward Safety  
When the engine is restarted, Forward  
Collision-Avoidance Assist will always  
turn on. However, if 'Off' is selected after  
the engine is restarted, the driver should  
always be aware of the surroundings  
and drive safely.  
CAUTION  
If 'Warning Only' is selected, braking is  
not assisted.  
NOTICE  
OMQ4AH050344  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Forward Safety'  
Forward Collision-Avoidance Assist will  
turn off when ESC is turned off by press  
ing and holding the ESC OFF button.  
-
5
63  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
The(  
)warning light will appear on  
the cluster.  
Warning Timing  
OMQ4041606  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
-
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
vation time for Forward Collision-Avoid  
-
-
-
-
-
ance Assist.  
When the vehicle is first delivered, Warn  
ing Timing is set to 'Normal'. If you  
-
change the Warning Timing, the warning  
time of other Driver Assistance systems  
may change.  
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
Warning Methods  
→ Haptic warning' on the Infotain  
-
ment system.  
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
driving, the audio volume will tempo  
-
rarily decrease to warn the driver with  
the audible warning.  
NOTICE  
OMQ4A052388  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
5
64  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
Collision Warning  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
Vibration Warning, the Warning Vol  
-
ume will be activated with volume '2'  
or 'Medium'.  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
-
vated.  
僅 The setting menu may not be avail  
-
OMQ4050071L  
able for your vehicle depending on  
僅 To warn the driver of a collision, the  
'Collision Warning' warning message  
will appear on the cluster, an audible  
warning will sound and the steering  
wheel will vibrate.  
the vehicle features and specifica  
-
tions.  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 If a vehicle is detected in front, the  
5
function will operate when your vehi  
cle speed is between approximately  
10 ~ 180 km/h (6 ~ 112 mph).  
-
僅 If a pedestrian is detected in front, the  
function will operate when your vehi  
cle speed is between approximately  
10 ~ 60 km/h (6 ~ 37 mph).  
-
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
僅 If 'Active Assist' is selected, braking  
may be assisted.  
Forward Collision-Avoidance  
Assist Operation  
Emergency Braking  
Warning and control  
The basic function for Forward Collision-  
Avoidance Assist is to warn and control  
the vehicle depending on the collision  
level: 'Collision Warning', 'Emergency  
Braking' and 'Stopping vehicle and end  
-
ing brake control'.  
OMQ4A051072N  
5
65  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 To warn the driver that emergency  
braking will be assisted, the 'Emer  
gency Braking' warning message will  
appear on the cluster, an audible  
warning will sound, and the steering  
wheel will vibrate.  
僅 Brake control will end after the vehicle  
is stopped by emergency braking for  
approximately 2 seconds.  
-
WARNING  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
僅 If a vehicle is detected in front, the  
function will operate when your vehi  
cle speed is between approximately  
10 ~ 60 km/h (6 ~ 37 mph).  
-
僅 With 'Active Assist' or 'Warning Only'  
selected, when ESC is turned off by  
pressing and holding the ESC OFF  
button, Forward Collision-Avoidance  
Assist will turn off automatically. In  
this case, the function cannot be set  
from the Settings menu and the warn  
ing light will appear on the cluster  
which is normal. If ESC is turned on by  
pressing the ESC OFF button, Forward  
僅 If a pedestrian is detected in front, the  
function will operate when your vehi  
cle speed is between approximately  
10 ~ 60 km/h (6 ~ 37 mph).  
-
-
僅 In emergency braking situation, brak  
-
ing is assisted with strong braking  
power by the function to help prevent  
collision with the vehicle or pedes  
-
Collision-Avoidance Assist will main  
-
trian.  
tain the last setting.  
僅 Forward Collision-Avoidance Assist  
does not operate in all situations or  
cannot avoid all collisions.  
Stopping vehicle and ending  
brake control  
僅 The driver should hold the responsi  
-
bility to control the vehicle. Do not  
solely depend on Forward Collision-  
Avoidance Assist. Rather, maintain a  
safe braking distance, and if neces  
-
sary, depress the brake pedal to  
reduce driving speed or to stop the  
vehicle.  
僅 Never deliberately operate Forward  
Collision-Avoidance Assist on people,  
animal, objects, etc. It may cause seri  
-
OMQ4040504L  
ous injury or death.  
僅 When the vehicle is stopped due to  
僅 Forward Collision-Avoidance Assist  
may not operate if the driver  
depresses the brake pedal to avoid  
collision.  
emergency braking, the 'Drive care  
fully' warning message will appear on  
the cluster.  
-
僅 For your safety, the driver should  
depress the brake pedal immediately  
and check the surroundings.  
僅 Depending on the road and driving  
conditions, Forward Collision-Avoid  
-
ance Assist may warn the driver late  
or may not warn the driver.  
5
66  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 During Forward Collision-Avoidance  
Assist operation, the vehicle may stop  
suddenly injuring passengers and  
shifting loose objects. Always have the  
seat belt on and keep loose objects  
secured.  
NOTICE  
僅 When a collision is imminent, the For  
ward Collision-Avoidance Assist may  
assist the driver with brakes if the  
driver fails to brake enough.  
僅 Depending on the instrument panel  
specifications or theme, images or  
colors may be displayed differently.  
-
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
is generated, Forward Collision-Avoid  
-
ance Assist warning message may not  
be displayed and audible warning  
may not be generated.  
僅 You may not hear the warning sound  
of Forward Collision-Avoidance Assist  
if the surrounding is noisy.  
Forward Collision-Avoidance  
Assist Malfunction and Limita  
tions  
-
Forward Collision-Avoidance  
Assist malfunction  
僅 Forward Collision-Avoidance Assist  
may turn off or may not operate prop  
erly or may operate unnecessarily  
depending on the road conditions and  
the surroundings.  
-
5
NOTICE  
僅 Even if there is a problem with For  
-
ward Collision-Avoidance Assist, the  
vehicle's basic braking performance  
will operate normally.  
OMQ4050074L  
僅 During emergency braking, braking  
control by the function will automati  
-
When Forward Collision-Avoidance  
Assist is not working properly, the  
'Check Forward Safety system' warning  
cally cancel when the driver exces  
-
sively depresses the accelerator pedal  
or sharply steers the vehicle.  
message will appear, and the(  
)
and( )warning lights will appear on  
CAUTION  
the cluster. Have the function inspected  
by an authorized Kia dealer.  
Depending on the condition of the vehi  
cle, pedestrian in front and the sur  
roundings, the speed range to operate  
-
-
Forward Collision-Avoidance Assist may  
reduce. The function may only warn the  
driver, or the function may not operate.  
5
67  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
stance is not detected after turning  
ON the engine.  
Forward Collision-Avoidance  
Assist disabled  
Limitations of Forward Collision-  
Avoidance Assist  
Forward Collision-Avoidance Assist may  
not operate normally, or the function  
may operate unexpectedly under the  
following circumstances:  
僅 The detecting sensor or the surround  
-
ings are contaminated or damaged  
僅 The temperature around the front  
view camera is high or low  
OMQ4050073L  
僅 The camera lens is contaminated due  
to tinted, filmed or coated windshield,  
damaged glass, or foreign material  
(sticker, bug, etc.) on the glass  
僅 Moisture is not removed or frozen on  
the windshield  
僅 Washer fluid is continuously sprayed,  
or the wiper is on  
僅 Driving in heavy rain or snow, or thick  
fog  
When the front windshield where the  
front view camera is located, is covered  
with foreign material, such as snow or  
rain, it can reduce the detecting perfor  
-
mance and temporarily limit or disable  
Forward Collision-Avoidance Assist.  
If this occurs, the 'Forward Safety Func  
-
tion disabled. Camera obscured' warning  
message, and the(  
)
僅 The field of view of the front view  
camera is obstructed by sun glare  
僅 Street light or light from an oncoming  
vehicle is reflected on the wet road  
surface, such as a puddle on the road  
僅 An object is placed on the dashboard  
僅 Your vehicle is being towed  
僅 The surrounding is very bright  
僅 The surrounding is very dark, such as  
in a tunnel, etc.  
僅 The brightness changes suddenly, for  
example when entering or exiting a  
tunnel  
僅 The brightness outside is low, and the  
headlamps are not on or are not  
bright  
僅 Driving through steam, smoke or  
shadow  
and( )warning lights will appear on  
the cluster.  
The function will operate normally when  
snow, rain or foreign matter is removed.  
Always keep it clean.  
If the function does not operate normally  
after obstruction (snow, rain, or foreign  
material) is removed, have the function  
inspected by an authorized Kia dealer.  
NOTICE  
僅 Even though the warning message or  
warning light does not appear on the  
cluster, Forward Collision-Avoidance  
Assist may not properly operate.  
僅 Forward Collision-Avoidance Assist  
may not properly operate in an area  
(e.g. open terrain), where any sub  
-
5
68  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 Only part of the vehicle, pedestrian is  
detected  
僅 The vehicle in front has an unusual  
shape  
僅 The vehicle in front is a bus, heavy  
truck, truck with a unusually shaped  
luggage, trailer, etc.  
僅 The vehicle in front has no taillamps,  
taillamps are located unusually, etc.  
僅 The vehicle in front is driving uphill or  
downhill.  
僅 The pedestrian is not fully detected,  
for example, if the pedestrian is lean-  
ing over or is not fully walking upright  
僅 The brightness outside is low, and the  
taillamps are not on or are not bright  
僅 The rear of the front vehicle is small or  
the vehicle does not look normal, such  
僅 The pedestrian is wearing clothing or  
equipment that makes it difficult to  
detect as a pedestrian  
Following image shows the image the  
sensor recognizes as vehicle and  
pedestrian.  
as when the vehicle is tilted, over  
-
turned, or the side of the vehicle is vis  
-
ible, etc.  
僅 The front vehicle's ground clearance  
is low or high  
僅 A vehicle or pedestrian suddenly cuts  
in front  
僅 The vehicle in front is detected late  
5
僅 The vehicle in front is suddenly  
blocked by a obstacle  
僅 The vehicle in front suddenly changes  
lane or suddenly reduces speed  
僅 The vehicle in front is bent out of  
shape  
僅 The front vehicle's speed is fast or  
slow  
僅 The vehicle in front steers in the  
opposite direction of your vehicle to  
avoid a collision  
僅 With a vehicle in front, your vehicle  
changes lane at low speed  
僅 The vehicle in front is covered with  
snow  
僅 You are departing or returning to the  
lane  
僅 Unstable driving  
僅 You are on a roundabout and the  
vehicle in front is not detected  
OJA040544  
僅 The pedestrian in front is moving very  
quickly  
僅 The pedestrian in front is short or is  
posing a low posture  
僅 The pedestrian in front has impaired  
mobility  
僅 The pedestrian in front is moving  
intersected with the driving direction  
僅 There is a group of pedestrians or a  
large crowd in front  
僅 The pedestrian is wearing clothing  
that easily blends into the back  
-
ground, making it difficult to detect  
僅 The pedestrian is difficult to distin  
guish from the similar shaped struc  
ture in the surroundings  
-
-
僅 You are continuously driving in a cir  
cle  
-
5
69  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 You are driving by a pedestrian, traffic  
signs, structures, etc. near the inter  
-
section  
僅 You are driving by a pedestrian, traffic  
signs, structures, etc. near the inter  
-
section  
僅 Driving in a parking lot  
僅 Driving through a tollgate, construc  
-
tion area, unpaved road, partial paved  
road, uneven road, speed bumps, etc.  
僅 Driving on an incline road, curved  
road, etc.  
僅 Driving through a roadside with trees  
or streetlights  
僅 The adverse road conditions cause  
excessive vehicle vibrations while  
driving  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
僅 Driving through a narrow road where  
trees or grass or overgrown  
僅 There is interference by electromag  
OCD059188  
Forward Collision-Avoidance Assist  
may not detect other vehicles, pedes  
trians in front of you on curved roads  
adversely affecting the performance  
of the sensors. This may result in no  
warning, braking assist or steering  
assist when necessary.  
When driving on a curve, you must  
maintain a safe braking distance, and  
if necessary, steer the vehicle and  
depress the brake pedal to reduce  
-
-
-
your driving speed in order to main  
tain a safe distance.  
-
netic waves, such as driving in an area  
with strong radio waves or electrical  
noise  
WARNING  
僅 Driving on a curved road  
OCD059191  
OMQ4H052599  
5
70  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
OCD059190  
OCD059192  
Forward Collision-Avoidance Assist  
may detect a vehicle, pedestrian in  
the next lane or outside the lane when  
driving on a curved road.  
Forward Collision-Avoidance Assist  
may not detect other vehicles, pedes  
trians in front of you while driving  
uphill or downhill adversely affecting  
the performance of the sensors.  
-
If this occurs, the function may unnec  
essarily warn the driver and control  
the brake or steering wheel. Always  
check the traffic conditions around  
the vehicle.  
-
This may result in unnecessary warn  
ing, braking assist or steering assist or  
no warning, braking assist or steering  
assist when necessary.  
-
5
僅 Driving on an inclined road  
Also, vehicle speed may rapidly  
decrease when a vehicle or pedestrian  
ahead is suddenly detected.  
Always have your eyes on the road  
while driving uphill or downhill and if  
necessary, steer your vehicle and  
depress the brake pedal to reduce  
your driving speed in order to main  
-
tain a safe distance.  
僅 Changing lanes  
OMQ4H052600  
5
71  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
OMQ4H052601  
OMQ4H052602  
[A]: Your vehicle  
[A]: Your vehicle  
[B]: Lane changing vehicle  
[B]: Lane changing vehicle,  
When a vehicle [B] moves into your  
lane from an adjacent lane, it cannot  
be detected by the sensor until it is in  
the sensor's detection range. Forward  
Collision-Avoidance Assist may not  
immediately detect the vehicle when  
the vehicle changes lanes abruptly. In  
this case, you must maintain a safe  
braking distance, and if necessary,  
steer your vehicle and depress the  
brake pedal to reduce your driving  
[C]: Same lane vehicle  
When a vehicle [B] in front of you  
merges out of the lane, Forward Colli  
sion-Avoidance Assist may not imme  
diately detect the vehicle [C] that is  
now in front of you. In this case, you  
must maintain a safe braking dis  
tance, and if necessary, steer your  
vehicle and depress the brake pedal  
-
-
-
to reduce your driving speed in order  
to maintain a safe distance.  
僅 Detecting vehicle  
speed in order to maintain a safe dis  
tance.  
-
5
72  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Front view camera  
only)  
僅 Forward Collision-Avoidance Assist  
may not operate normally if interfered  
by strong electromagnetic waves.  
僅 Forward Collision-Avoidance Assist  
may not operate for approximately 15  
seconds after the vehicle is started, or  
the front view camera is initialized.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
Operation is subject to the following  
conditions:  
-
OMQ4050075  
If the vehicle in front of you has cargo  
that extends rearward from the cab,  
or when the vehicle in front of you has  
higher ground clearance, additional  
special attention is required. Forward  
Collision-Avoidance Assist may not be  
able to detect the cargo extending  
from the vehicle. In these instances,  
1. This device may not cause interfer  
-
ence, and  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
5
you must maintain a safe braking dis  
-
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
tance from the rearmost object, and if  
necessary, steer your vehicle and  
depress the brake pedal to reduce  
your driving speed in order to main  
-
tain distance.  
WARNING  
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Forward Collision-Avoidance Assist is  
turned off due to safety reasons.  
僅 Forward Collision-Avoidance Assist  
may operate if objects that are similar  
in shape or characteristics to vehicles  
and pedestrians are detected.  
僅 Forward Collision-Avoidance Assist  
does not operate on motorcycles, or  
smaller wheeled objects, such as lug  
-
gage bags, shopping carts, or strollers  
that are dragged by a pedestrian.  
5
73  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
crossroad with the turn signal on by  
applying emergency braking.  
Forward Collision-Avoidance  
Assist (FCA) (Sensor fusion) (if  
equipped)  
Detecting sensor  
Basic function  
Front view camera  
OMQ4051078  
OMQ4H052603  
Front radar  
Forward Collision-Avoidance Assist is  
designed to help detect and monitor the  
vehicle ahead or help detect a pedes  
-
trian or cyclist in the roadway and warn  
the driver that a collision is imminent  
with a warning message and an audible  
warning, and if necessary, apply emer  
-
gency braking.  
Junction Turning function  
OMQ4051077  
Refer to the picture above for the  
detailed location of the detecting sen  
sors.  
-
CAUTION  
Take the following precautions to main  
-
-
tain optimal performance of the detect  
ing sensor:  
僅 Never disassemble the detecting sen  
sor or sensor assembly, or apply any  
impact on it.  
-
OMQ4H052646  
Junction Turning function will help avoid  
a collision with an oncoming vehicle in  
an adjacent lane when turning left at a  
5
74  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
僅 Never install any accessories or stick  
ers on the front windshield, or tint the  
front windshield.  
-
Forward Collision-Avoidance  
Assist Settings  
僅 If the detecting sensors have been  
replaced or repaired, have the vehicle  
inspected by an authorized Kia dealer.  
Forward Safety  
僅 Pay extreme caution to keep the front  
view camera dry.  
僅 Never place any reflective objects (i.e.  
white paper, mirror) over the dash  
-
-
board. Any light reflection may pre  
vent the function from functioning  
properly.  
僅 Do not apply license plate frame or  
objects, such as a bumper sticker, film  
or a bumper guard, near the front  
radar cover.  
OMQ4AH050344  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Forward Safety'  
from the Settings menu to set whether  
or not to use each function.  
僅 If 'Active Assist' is selected, the func  
tion will warn the driver with a warn  
ing message, an audible warning and  
steering wheel vibration depending  
on the collision risk levels. Braking  
assist will be applied depending on  
the collision risk.  
僅 If 'Warning Only' is selected, the func  
tion will warn the driver with a warn  
ing message and an audible warning  
depending on the collision risk levels.  
Braking will not be assisted.  
僅 Always keep the front radar and cover  
clean and free of dirt and debris. Use  
only a soft cloth to wash the vehicle.  
Do not spray pressurized water  
5
directly on the sensor or sensor cover.  
-
-
僅 If unnecessary force has been applied  
to the radar or around the radar, For  
-
ward Collision-Avoidance Assist may  
not properly operate even though a  
warning message does not appear on  
the cluster. Have the vehicle be  
inspected by an authorized Kia dealer.  
-
僅 The genuine Kia front radar sensor  
-
covers are parts with quality and per  
-
-
formance ensured. If arbitrarily apply  
ing paint on or changing the cover,  
Forward Collision-Avoidance Assist  
may not function properly. Use only  
Kia Genuine Parts or those of an  
equivalent standard with proven qual  
ity and performance to repair or  
replace the radar sensor covers.  
僅 If 'Off' is selected, the function will be  
off. The(  
)warning light will  
-
appear on the cluster.  
The driver can monitor Forward Colli  
sion-Avoidance Assist ON/OFF status  
from the Settings menu. If the  
-
(
)warning light remains ON when  
5
75  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
the function is ON, have the function be  
inspected by an authorized Kia dealer.  
Warning Timing  
WARNING  
When the engine is restarted, Forward  
Collision-Avoidance Assist will always  
turn on. However, if 'Off' is selected after  
the engine is restarted, the driver should  
always be aware of the surroundings  
and drive safely.  
CAUTION  
僅 If 'Warning Only' is selected, braking is  
not assisted.  
僅 The settings for Forward Safety  
include 'Basic function' and 'Junction  
Turning'.  
僅 Steering wheel vibration can be  
turned on or off. Select or deselect  
'Driver Assistance → Haptic Warning'  
from the Settings menu.  
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
vation time for Forward Collision-Avoid  
-
-
ance Assist.  
When the vehicle is first delivered, Warn  
ing Timing is set to 'Normal'.  
-
If you change the Warning Timing, the  
warning time of other Driver Assistance  
systems may change.  
NOTICE  
Forward Collision-Avoidance Assist will  
turn off when ESC is turned off by press  
ing and holding the ESC OFF button.  
Warning Methods  
-
The(  
)warning light will appear on  
the cluster.  
OMQ4A052388  
5
76  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
Vibration Warning, the Warning Vol  
-
ume will be activated with volume '2'  
or 'Medium'.  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
-
OMQ4041606  
vated.  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
tions.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
-
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
-
5
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
-
-
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Forward Collision-Avoidance  
Assist Operation  
Driver Assistance → Warning Methods  
→ Haptic warning' on the Infotain  
-
Basic function  
ment system.  
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
Warning and control  
The basic function for Forward Collision-  
Avoidance Assist is to warn and control  
the vehicle depending on the collision  
level: 'Collision Warning', 'Emergency  
driving, the audio volume will tempo  
-
rarily decrease to warn the driver with  
the audible warning.  
Braking' and 'Stopping vehicle and end  
ing brake control'.  
-
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
5
77  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
Collision Warning  
Emergency Braking  
OMQ4050071L  
OMQ4A051072N  
僅 To warn the driver of a collision, the  
'Collision Warning' warning message  
will appear on the cluster, an audible  
warning will sound, and the steering  
wheel will vibrate.  
僅 To warn the driver that emergency  
braking will be assisted, the 'Emer  
-
gency Braking' warning message will  
appear on the cluster, an audible  
warning will sound and the steering  
wheel will vibrate.  
僅 If a vehicle is detected in front, the  
function will operate when your vehi  
cle speed is between approximately  
10 ~ 180 km/h (6 ~ 112 mph).  
-
僅 If a vehicle is detected in front, the  
function will operate when your vehi  
cle speed is between approximately  
10 ~ 75 km/h (6 ~ 47 mph).  
-
僅 If a pedestrian or cyclist is detected in  
front, the function will operate when  
your vehicle speed is between  
approximately 10 ~ 85 km/h (6 ~ 53  
mph).  
僅 If 'Active Assist' is selected, braking  
may be assisted.  
僅 If a pedestrian or cyclist is detected in  
front, the function will operate when  
your vehicle speed is between  
approximately 10 ~ 65 km/h (6 ~ 40  
mph).  
僅 In emergency braking situation, brak  
ing is assisted with strong braking  
-
power by the function to help prevent  
collision with the vehicle, pedestrian,  
or cyclist ahead.  
5
78  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
Stopping vehicle and ending  
brake control  
Collision Warning  
OMQ4051212L  
OMQ4040504L  
僅 To warn the driver of a collision, the  
'Collision Warning' warning message  
will appear on the cluster, an audible  
warning will sound, and the steering  
wheel will vibrate.  
僅 When the vehicle is stopped due to  
emergency braking, the 'Drive care  
fully' warning message will appear on  
the cluster.  
-
僅 The function will operate when your  
For your safety, the driver should  
depress the brake pedal immediately  
and check the surroundings.  
僅 Brake control will end after the vehicle  
is stopped by emergency braking for  
approximately 2 seconds.  
5
vehicle speed is between approxi  
-
mately 10 ~ 30 km/h (6 ~ 19 mph) and  
the oncoming vehicle speed is  
between approximately 30 ~ 70 km/h  
(19 ~ 44 mph).  
僅 If 'Active Assist' is selected, braking  
may be assisted.  
Junction Turning function  
Warning and control  
Emergency Braking  
Junction Turning function will warn and  
control the vehicle depending on the col  
lision level: 'Collision Warning', 'Emer  
-
-
gency Braking' and 'Stopping vehicle  
and ending brake control'.  
OMQ4050211L  
僅 To warn the driver that emergency  
braking will be assisted, the 'Emer  
-
5
79  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
gency Braking' warning message will  
appear on the cluster, an audible  
warning will sound, and the steering  
wheel will vibrate.  
WARNING  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
僅 The function will operate when your  
僅 With 'Active Assist' or 'Warning Only'  
selected, when ESC is turned off by  
pressing and holding the ESC OFF  
button, Forward Collision-Avoidance  
Assist will turn off automatically. In  
vehicle speed is between approxi  
-
mately 10 ~ 30 km/h (6 ~ 19 mph) and  
the oncoming vehicle speed is  
between approximately 30 ~ 70 km/h  
(19 ~ 44 mph).  
this case, the function cannot be set  
僅 In emergency braking situation, brak  
ing is assisted with strong braking  
power by the function to help prevent  
collision with the oncoming vehicle.  
-
from the Settings menu and the  
warning light will appear on the clus  
ter which is normal. If ESC is turned on  
-
by pressing the ESC OFF button, For  
ward Collision-Avoidance Assist will  
maintain the last setting.  
僅 Forward Collision-Avoidance Assist  
does not operate in all situations or  
cannot avoid all collisions.  
-
Stopping vehicle and ending  
brake control  
僅 The driver should hold the responsi  
-
bility to control the vehicle. Do not  
solely depend on Forward Collision-  
Avoidance Assist. Rather, maintain a  
safe braking distance, and if neces  
-
sary, depress the brake pedal to  
reduce driving speed or to stop the  
vehicle.  
僅 Never deliberately operate Forward  
OMQ4040504L  
Collision-Avoidance Assist on people,  
僅 When the vehicle is stopped due to  
emergency braking, the 'Drive care  
animal, objects, etc. It may cause seri  
ous injury or death.  
僅 Forward Collision-Avoidance Assist  
may not operate if the driver  
depresses the brake pedal to avoid  
collision.  
-
-
fully' warning message will appear on  
the cluster.  
For your safety, the driver should  
depress the brake pedal immediately  
and check the surroundings.  
僅 Brake control will end after the vehicle  
is stopped by emergency braking for  
approximately 2 seconds.  
僅 Depending on the road and driving  
conditions, Forward Collision-Avoid  
-
ance Assist may warn the driver late  
or may not warn the driver.  
僅 During Forward Collision-Avoidance  
Assist operation, the vehicle may stop  
suddenly injuring passengers and  
5
80  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
shifting loose objects. Always have the  
seat belt on and keep loose objects  
secured.  
driving direction, speed, and sur  
roundings.  
-
僅 If any other function's warning mes  
sage is displayed or audible warning  
is generated, Forward Collision-Avoid  
ance Assist warning message may not  
be displayed and audible warning  
may not be generated.  
-
NOTICE  
When a collision is imminent, the For  
ward Collision-Avoidance Assist may  
assist the driver with brakes if the driver  
fails to brake enough.  
-
-
僅 You may not hear the warning sound  
of Forward Collision-Avoidance Assist  
if the surroundings are noisy.  
Forward Collision-Avoidance  
Assist Malfunction and Limita  
tions  
-
僅 Forward Collision-Avoidance Assist  
may turn off or may not operate prop  
erly or may operate unnecessarily  
depending on the road conditions and  
the surroundings.  
-
Forward Collision-Avoidance  
Assist malfunction  
NOTICE  
僅 Even if there is a problem with For  
5
-
ward Collision-Avoidance Assist, the  
vehicle's basic braking performance  
will operate normally.  
僅 During emergency braking, braking  
control by the function will automati  
-
cally cancel when the driver exces  
-
OMQ4050074L  
sively depresses the accelerator pedal  
or sharply steers the vehicle.  
When Forward Collision-Avoidance  
Assist is not working properly, the  
'Check Forward Safety system' warning  
NOTICE  
message will appear, and the ( ) and  
僅 Depending on the condition of the  
vehicle, pedestrian and cyclist in front  
and the surroundings, the speed  
range to operate Forward Collision-  
Avoidance Assist may reduce. The  
function may only warn the driver, or  
the function may not operate.  
(
) warning lights will appear on the  
cluster. Have the function inspected by  
an authorized Kia dealer.  
僅 Forward Collision-Avoidance Assist  
will operate under certain conditions  
by judging the risk level based on the  
condition of the oncoming vehicle,  
5
81  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
If the function does not operate normally  
after obstruction (snow, rain, or foreign  
material) is removed, have the function  
inspected by an authorized Kia dealer.  
Forward Collision-Avoidance  
Assist disabled  
NOTICE  
僅 Even though the warning message or  
warning light does not appear on the  
cluster, Forward Collision-Avoidance  
Assist may not properly operate.  
僅 Forward Collision-Avoidance Assist  
may not properly operate in an area  
(e.g. open terrain), where any sub  
-
stance is not detected after turning  
ON the engine.  
OMQ4050073L  
Limitations of Forward Collision-  
Avoidance Assist  
Forward Collision-Avoidance Assist may  
not operate normally, or the function  
may operate unexpectedly under the  
following circumstances:  
僅 The detecting sensor or the surround  
-
ings are contaminated or damaged  
僅 The temperature around the front  
view camera is high or low  
OMQ4050079L  
When the front windshield where the  
front view camera is located, front radar  
cover, sensor is covered with foreign  
material, such as snow or rain, it can  
reduce the detecting performance and  
temporarily limit or disable Forward Col  
lision-Avoidance Assist.  
If this occurs, the 'Forward Safety Func  
tion disabled. Camera obscured' or the  
'Forward Safety Function disabled.  
Radar blocked' warning message, and  
僅 The camera lens are contaminated  
due to tinted, filmed or coated wind  
-
shield, damaged glass, or stuck of for  
-
eign material (sticker, bug, etc.) on the  
glass  
-
僅 Moisture is not removed or frozen on  
the windshield  
僅 Washer fluid is continuously sprayed,  
or the wiper is on  
僅 Driving in heavy rain, snow, or thick  
fog  
僅 The field of view of the front view  
camera is obstructed by sun glare  
-
the (  
) and(  
) warning lights will  
appear on the cluster.  
僅 Street light or light from an oncoming  
vehicle is reflected on the wet road  
surface, such as a puddle on the road  
The function will operate normally when  
snow, rain, or foreign matter is removed.  
Always keep it clean.  
5
82  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
僅 An object is placed on the dashboard  
僅 Your vehicle is being towed  
僅 The surrounding is very bright  
僅 The surrounding is very dark, such as  
in a tunnel, etc.  
僅 The brightness changes suddenly, for  
example when entering or exiting a  
tunnel  
僅 The brightness outside is low, and the  
headlamps are not on or are not  
bright  
僅 Driving through steam, smoke or  
shadow  
僅 Only part of the vehicle, pedestrian or  
cyclist is detected  
僅 The vehicle in front is a bus, heavy  
truck, truck with a unusually shaped  
luggage, trailer, etc.  
僅 Driving near areas containing metal  
substances, such as a construction  
zone, railroad, etc.  
僅 A material is near that reflects very  
well on the front radar, such as a  
guardrail, nearby vehicle, etc.  
僅 The cyclist in front is on a bicycle  
made of material that does not reflect  
on the front radar  
僅 The vehicle in front is detected late  
僅 The vehicle in front is suddenly  
blocked by a obstacle  
僅 The vehicle in front suddenly changes  
lane or suddenly reduces speed  
僅 The vehicle in front is bent out of  
shape  
僅 The front vehicle's speed is fast or  
slow  
5
僅 The vehicle in front steers in the  
opposite direction of your vehicle to  
avoid a collision  
僅 With a vehicle in front, your vehicle  
changes lane at low speed  
僅 The vehicle in front is covered with  
snow  
僅 You are departing or returning to the  
lane  
僅 The vehicle in front has no taillamps,  
taillamps are located unusually, etc.  
僅 The brightness outside is low, and the  
taillamps are not on or are not bright  
僅 The rear of the front vehicle is small or  
the vehicle does not look normal, such  
as when the vehicle is tilted, over  
-
turned, or the side of the vehicle is vis  
-
ible, etc.  
僅 The front vehicle's ground clearance  
is low or high  
僅 Unstable driving  
僅 You are on a roundabout and the  
vehicle in front is not detected  
僅 You are continuously driving in a cir  
cle  
僅 A vehicle, pedestrian or cyclist sud  
denly cuts in front  
-
-
僅 The bumper around the front radar is  
impacted, damaged or the front radar  
is out of position  
僅 The vehicle in front has an unusual  
shape  
僅 The temperature around the front  
radar is high or low  
僅 The vehicle in front is driving uphill or  
downhill.  
僅 Driving through a tunnel or iron  
bridge  
僅 Driving in large areas where there are  
few vehicles or structures (i.e. desert,  
meadow, suburb, etc.)  
僅 The pedestrian or cyclist is not fully  
detected, for example, if the pedes  
trian is leaning over or is not fully  
walking upright  
-
5
83  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
僅 The pedestrian or cyclist is wearing  
clothing or equipment that makes it  
difficult to detect as a pedestrian or  
cyclist  
僅 Driving through a tollgate, construc-  
tion area, unpaved road, partial paved  
road, uneven road, speed bumps, etc.  
僅 Driving on an incline road, curved  
road, etc.  
僅 Driving through a roadside with trees  
or streetlights  
Following image shows the image the  
sensor recognizes as vehicle, pedes  
trian, and cyclist.  
-
僅 Unstable driving  
僅 The adverse road conditions cause  
excessive vehicle vibrations while  
driving  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
-
僅 Driving through a narrow road where  
trees or grass or overgrown  
僅 There is interference by electromag  
-
OADAS044  
netic waves, such as driving in an area  
with strong radio waves or electrical  
noise  
僅 The pedestrian or cyclist in front is  
moving very quickly  
僅 The pedestrian or cyclist in front is  
short or is posing a low posture  
僅 The pedestrian or cyclist in front has  
impaired mobility  
WARNING  
僅 Driving on a curved road  
僅 The pedestrian or cyclist in front is  
moving intersected with the driving  
direction  
僅 There is a group of pedestrians,  
cyclists or a large crowd in front  
僅 The pedestrian or cyclist is wearing  
clothing that easily blends into the  
background, making it difficult to  
detect  
僅 The pedestrian or cyclist is difficult to  
distinguish from the similar shaped  
structure in the surroundings  
OMQ4H052608  
僅 You are driving by a pedestrian,  
cyclist, traffic signs, structures, etc.  
near the intersection  
僅 Driving in a parking lot  
5
84  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
ODEEV069238NR  
ODEEV069240NR  
5
ODEEV069239NR  
ODEEV069241NR  
Forward Collision-Avoidance Assist  
may not detect other vehicles, pedes  
trians, or cyclists in front of you on  
curved roads adversely affecting the  
performance of the sensors. This may  
result in no warning and braking  
assist when necessary.  
-
When driving on a curve, you must  
maintain a safe braking distance, and  
if necessary, steer the vehicle and  
depress the brake pedal to reduce  
ODEEV069242NR  
your driving speed in order to main  
-
Forward Collision-Avoidance Assist  
may detect a vehicle, pedestrian, or  
cyclist in the next lane or outside the  
lane when driving on a curved road.  
tain a safe distance.  
If this occurs, the function may unnec  
essarily warn the driver and control  
the brake. Always check the traffic  
conditions around the vehicle.  
-
5
85  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
僅 Driving on an inclined road  
This may result in unnecessary warn  
ing, braking assist or no warning,  
braking assist when necessary.  
-
Also, vehicle speed may rapidly  
decrease when a vehicle, pedestrian  
or cyclist ahead is suddenly detected.  
Always have your eyes on the road  
while driving uphill or downhill and if  
necessary, steer your vehicle and  
depress the brake pedal to reduce  
your driving speed in order to main  
-
tain a safe distance.  
OMQ4H052609  
僅 Changing lanes  
ODEEV069244NR  
OMQ4H052610  
[A]: Your vehicle  
[B]: Lane changing vehicle  
When a vehicle [B] moves into your  
lane from an adjacent lane, it cannot  
be detected by the sensor until it is in  
the sensor's detection range. Forward  
Collision-Avoidance Assist may not  
immediately detect the vehicle when  
the vehicle changes lanes abruptly. In  
this case, you must maintain a safe  
braking distance, and if necessary,  
steer your vehicle and depress the  
brake pedal to reduce your driving  
ODEEV069245NR  
Forward Collision-Avoidance Assist  
may not detect other vehicles, pedes  
trians, or cyclists in front of you while  
driving uphill or downhill adversely  
affecting the performance of the sen  
sors.  
-
-
speed in order to maintain a safe dis  
-
tance.  
5
86  
Driving your vehicle  
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)  
or when the vehicle in front of you has  
higher ground clearance, additional  
special attention is required. Forward  
Collision-Avoidance Assist may not be  
able to detect the cargo extending  
from the vehicle. In these instances,  
you must maintain a safe braking dis  
-
tance from the rearmost object, and if  
necessary, steer your vehicle and  
depress the brake pedal to reduce  
your driving speed in order to main  
-
tain distance.  
WARNING  
OMQ4H052611  
僅 When you are towing a trailer or  
[A]: Your vehicle  
[B]: Lane changing vehicle  
[C]: Same lane vehicle  
another vehicle, we recommend that  
Forward Collision-Avoidance Assist is  
turned off due to safety reasons.  
When a vehicle [B] in front of you  
僅 Forward Collision-Avoidance Assist  
may operate if objects that are similar  
in shape or characteristics to vehicles,  
pedestrians and cyclists are detected.  
5
merges out of the lane, Forward Colli  
-
-
sion-Avoidance Assist may not imme  
diately detect the vehicle [C] that is  
now in front of you. In this case, you  
僅 Forward Collision-Avoidance Assist  
must maintain a safe braking dis  
-
does not operate on bicycles, motor  
-
tance, and if necessary, steer your  
vehicle and depress the brake pedal  
cycles, or smaller wheeled objects,  
such as luggage bags, shopping carts,  
or strollers that are dragged by a  
pedestrian or a cyclist.  
僅 Forward Collision-Avoidance Assist  
may not operate normally if interfered  
by strong electromagnetic waves.  
to reduce your driving speed in order  
to maintain a safe distance.  
僅 Detecting vehicle  
僅 Forward Collision-Avoidance Assist  
may not operate for approximately 15  
seconds after the vehicle is started, or  
the front view camera is initialized.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
OMQ4H050038  
Operation is subject to the following  
conditions:  
If the vehicle in front of you has cargo  
that extends rearward from the cab,  
5
87  
Driving your vehicle  
Lane Keeping Assist (LKA)  
1. This device may not cause interfer  
ence, and  
2. This device must accept any interfer  
-
Lane Keeping Assist (LKA)  
Lane Keeping Assist is designed to help  
detect lane markings (or road edges)  
while driving over a certain speed. The  
-
ence, including interference that may  
cause undesired operation of the  
device.  
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
function will warn the driver if the vehi  
-
cle leaves the lane without using the turn  
signal, or will automatically assist the  
driver's steering to help prevent the  
vehicle from departing the lane.  
Detecting sensor  
Front view camera  
OMQ4051078  
The front view camera is used as a  
detecting sensor to detect lane markings  
(or road edges).  
Refer to the picture above for the  
detailed location of the detecting sensor.  
NOTICE  
For more details on the precautions of  
the front view camera, refer to "Forward  
Collision-Avoidance Assist (FCA) (Sen  
-
sor fusion) (if equipped)" on page 5-74.  
5
88  
Driving your vehicle  
Lane Keeping Assist (LKA)  
僅 The driver should always be aware of  
Lane Keeping Assist Settings  
Lane Safety  
the surroundings and steer the vehi  
-
cle if 'Off' is selected.  
Turning On/Off  
OMQ4AH050345  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Lane Safety' from  
the Settings menu to set whether or not  
to use each function.  
僅 If 'Lane Keeping Assist' is selected, the  
function will automatically assist the  
driver's steering when lane departure  
is detected to help prevent the vehicle  
from moving out of its lane.  
OMQ4A051081  
With the ENGINE START/STOP button in  
the ON position, press the Lane Safety  
button located on the instrument panel  
to turn on Lane Keeping Assist. The  
5
white (  
on the cluster.  
) indicator light will appear  
NOTICE  
僅 If 'Lane Departure Warning' is  
selected, the function will warn the  
driver with an audible warning and  
steering wheel vibration when lane  
departure is detected. The driver must  
steer the vehicle.  
僅 If the engine is restarted, Lane Keep  
-
ing Assist will maintain the last setting.  
僅 When Lane Keeping Assist is turned  
off with the Lane Safety button, Lane  
Safety settings will turn off.  
僅 If 'Off' is selected, the function will  
turn off. The (  
) indicator light  
will turn off on the cluster.  
WARNING  
僅 If 'Lane Departure Warning' is  
selected, steering is not assisted.  
僅 Lane Keeping Assist does not control  
the steering wheel when the vehicle is  
driven in the middle of the lane.  
5
89  
Driving your vehicle  
Lane Keeping Assist (LKA)  
→ Haptic warning' on the Infotain  
-
Warning Methods  
ment system.  
僅 Lane Safety Warning Off: Select 'User  
Settings → Driver Assistance → Lane  
Safety Warning Off' on the LCD dis  
-
play or 'Settings → Vehicle → Driver  
Assistance → Warning Methods →  
Lane Safety Warning Off' to turn off  
an audible warning when both Warn  
-
ing sound and Steering wheel haptic  
warning are turned on.  
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
OMQ4A052388  
driving, the audio volume will tempo  
-
rarily decrease to warn the driver with  
the audible warning.  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
OMQ4A042597  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
Vibration Warning, the Warning Vol  
-
ume will be activated with volume '2'  
or 'Medium'.  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
vated.  
僅 You can select Lane Safety Warning  
Off only when both Warning sound  
and Steering wheel haptic warning  
are turned on.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
-
-
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Hands-off Warning Volume will  
not turn off but the volume will sound  
as '1' or 'Low'.  
-
-
-
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
-
僅 The setting menu may not be avail  
able for your vehicle depending on  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
the vehicle features and specifica  
-
tions.  
5
90  
Driving your vehicle  
Lane Keeping Assist (LKA)  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
Right  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
OMQ4050086  
Lane Keeping Assist Operation  
Warning and control  
僅 To warn the driver that the vehicle is  
departing from the projected lane in  
front, the green (  
will blink on the cluster, the lane line  
will blink on the cluster depending on  
which direction the vehicle is veering,  
and an audible warning will sound.  
Also, the steering wheel will vibrate.  
Lane Keeping Assist will warn and con  
-
) indicator light  
trol the vehicle with Lane Departure  
Warning and Lane Keeping Assist.  
5
Lane Departure Warning  
Left  
僅 The function will operate when your  
vehicle speed is between approxi  
mately 60 ~ 200 km/h (40 ~ 120  
mph).  
-
Lane Keeping Assist  
僅 To warn the driver that the vehicle is  
departing from the projected lane in  
front, the green (  
will blink on the cluster, and the steer  
) indicator light  
-
ing wheel will make adjustments to  
keep vehicle inside the lane.  
OMQ4050085  
僅 The function will operate when your  
vehicle speed is between approxi  
mately 60 ~ 200 km/h (40 ~ 120  
mph).  
-
5
91  
Driving your vehicle  
Lane Keeping Assist (LKA)  
Hands-off warning  
NOTICE  
僅 For more details on the setting cluster,  
refer to "Instrument cluster" on page  
4-69.  
僅 When lane markings (or road edges)  
are detected, the lane lines on the  
cluster will change from grey to white  
and the green (  
will appear.  
) indicator light  
Lane undetected  
OMQ4051155L  
If the driver takes their hands off the  
steering wheel for several seconds, the  
'Keep hands on the steering wheel'  
warning message will appear on the  
cluster, and an audible warning will  
sound in stages.  
WARNING  
僅 The steering wheel may not be  
assisted if the steering wheel is held  
very tight or the steering wheel is  
steered over a certain degree.  
OMQ4050296L  
Lane detected  
僅 Lane Keeping Assist does not operate  
at all times. It is the responsibility of  
the driver to safely steer the vehicle  
and to maintain the vehicle in its lane.  
僅 The hands–off warning message may  
appear late depending on road condi  
tions. Always have your hands on the  
steering wheel while driving.  
-
僅 If the steering wheel is held very  
lightly, the hands–off warning mes  
-
-
sage may appear because the func  
OMQ4050084  
tion may not recognize that the driver  
has their hands on the steering wheel.  
僅 If you attach objects to the steering  
wheel, the hands-off warning may not  
work properly.  
僅 Even though the steering is assisted  
by Lane Keeping Assist, the driver  
may control the steering wheel.  
僅 The steering wheel may feel heavier  
or lighter when the steering wheel is  
5
92  
Driving your vehicle  
Lane Keeping Assist (LKA)  
assisted by Lane Keeping Assist than  
when it is not.  
road looks similar to the lane mark  
-
ings (or road edges)  
- The lane marking (or road edge) is  
indistinct or damaged  
- The shadow is on the lane marking  
(or road edge) by a median strip,  
trees, guardrail, noise barriers, etc.  
Lane Keeping Assist Malfunction  
and Limitations  
Lane Keeping Assist malfunction  
僅 There are more than two lane mark  
-
ings (or road edges) on the road  
僅 The lane number increases or  
decreases, or the lane markings are  
crossing  
僅 The lane markings (or road edges) are  
complicated or a structure substitutes  
for the lines, such as a construction  
area  
僅 There are road markings, such as zig  
zag lanes, crosswalk markings and  
road signs  
僅 The lane suddenly disappears, such  
as at the intersection  
僅 The lane (or road width) is very wide  
or narrow  
僅 There is a road edge without a lane  
僅 There is a boundary structure in the  
-
OMQ4050214L  
5
When Lane Keeping Assist is not work  
ing properly, the 'Check Lane Keeping  
Assist (LKA) system' warning message  
will appear and the yellow (  
cator light will appear on the cluster. If  
this occurs, have the function inspected  
by an authorized Kia dealer.  
-
) indi-  
roadway, such as a tollgate, sidewalk,  
curb, etc.  
僅 The distance to the front vehicle is  
extremely short or the vehicle in front  
is covering the lane marking (or road  
edge)  
僅 The vehicle is driving to the bus lane,  
or driving at the left or right side of  
the bus lane  
Limitations of Lane Keeping  
Assist  
Lane Keeping Assist may not operate  
normally or may operate unexpectedly  
under the following circumstances:  
僅 The lane is contaminated or difficult  
to distinguish because,  
- The lane markings (or road edge) is  
covered with rain, snow, dirt, oil,  
etc.  
NOTICE  
For more details on the limitations of the  
- The color of the lane marking (or  
road edge) is not distinguishable  
from the road  
- There are markings (or road edges)  
on the road near the lane or the  
markings (or road edges) on the  
front view camera, refer to "Forward Col  
lision-Avoidance Assist (FCA) (Sensor  
fusion) (if equipped)" on page 5-74.  
-
5
93  
Driving your vehicle  
Lane Keeping Assist (LKA)  
- The turn signal or hazard waring  
flasher is turned on  
- The vehicle is not driven in the cen  
ter of the lane when the function is  
turned on or right after changing a  
lane  
NOTICE  
Take the following precautions when  
using Lane Keeping Assist:  
僅 The dsafe exit assist does not operate  
in all situariver should hold the  
responsibility to safely drive and con  
trol the vehicle. Do not solely rely on  
the function and drive dangerously.  
僅 The operation of Lane Keeping Assist  
can be canceled or not work properly  
depending on road conditions and  
surroundings. Always be cautious  
while driving.  
僅 Refer to "Limitations" if the lane is not  
detected properly.  
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Lane Keeping Assist is turned off due  
to safety reasons.  
-
-
- ESC (Electronic Stability Control) or  
VSM (Vehicle Stability Manage  
-
ment) is activated  
- The vehicle is driven on a sharp  
curve  
- Vehicle speed is below 55 km/h (34  
mph) or above 210 km/h (130 mph)  
- The vehicle makes sharp lane  
changes  
- The vehicle brakes suddenly  
僅 If the vehicle is driven at high speed,  
the steering wheel will not be con  
-
trolled. The driver must always follow  
the speed limit when using the func  
tion.  
-
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
is generated, Lane Keeping Assist  
warning message may not be dis  
-
played and audible warning may not  
be generated.  
僅 You may not hear the warning sound  
of Lane Keeping Assist if the sur  
-
rounding is noisy.  
僅 If you attach objects to the steering  
wheel, steering may not be assisted  
properly.  
僅 Lane Keeping Assist may not operate  
for approximately 15 seconds after  
the vehicle is started, or the Front  
view camera is initialized.  
僅 Lane Keeping Assist will not operate  
when:  
5
94  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
Blind-Spot Collision-Avoid  
ance Assist (BCA) (if  
equipped)  
-
Blind-Spot Collision-Avoidance Assist is  
designed to help detect and monitor  
approaching vehicles in the driver's blind  
spot area and warn the driver of a possi  
ble collision with a warning message and  
audible warning.  
-
In addition, if there is a risk of collision  
when changing lanes or driving forward  
out of a parking space, the function will  
help avoid collision by applying the  
brake.  
OMQ4050092  
Blind-Spot Collision Assist help detect  
and informs the driver that a vehicle is  
approaching at high speed from the  
blind spot area.  
CAUTION  
Warning Timing may vary depending on  
the speed of the vehicle approaching at  
high speed.  
5
OMQ4H052612  
Blind-Spot Collision-Avoidance Assist  
will help detect and inform the driver  
that a vehicle is in the blind spot.  
CAUTION  
The detecting range may vary depend  
-
-
ing on the speed of your vehicle. How  
ever, even if there is a vehicle in the  
blind spot, the function may not warn  
OMQ4051093  
When changing lanes by detecting the  
lane ahead, if the function judges that  
there is a collision risk with an approach  
you when you pass by at high speeds.  
-
ing vehicle in the blind spot, the function  
will help avoid collision by applying the  
differential brake.  
5
95  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
Rear corner radar  
OMQ4050245  
OMQ4A042598  
When you are driving forward out of a  
parking space, if Blind-Spot Collision-  
Avoidance Assist judges that there is a  
collision risk with an approaching vehicle  
in the blind spot, the function will help  
avoid collision by applying the brake.  
Refer to the picture above for the  
detailed location of the detecting sen  
sors.  
-
CAUTION  
Take the following precautions to main  
tain optimal performance of the detect  
-
-
Detecting sensor  
ing sensor:  
Front view camera  
僅 Never disassemble the rear corner  
radar or radar assembly, or apply any  
impact on it.  
僅 If there is impact on the rear corner  
radar or near the radar, even though  
the warning message does not appear  
on the cluster, Blind-Spot Collision-  
Avoidance Assist may not operate  
properly. Have the function inspected  
by an authorized Kia dealer.  
僅 If the rear corner radars have been  
replaced or repaired, have the vehicle  
inspected by an authorized Kia dealer.  
OMQ4051078  
僅 The genuine Kia rear bumpers which  
the Rear corner radar sensors are  
mounted are parts with quality and  
performance ensured. If arbitrarily  
applying paint on or changing the  
bumper, the Blind-Spot Collision-  
Avoidance Assist may not function  
properly. Use only Kia Genuine Parts  
or those of an equivalent standard  
5
96  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
with proven quality and performance  
to repair or replace the bumper.  
from the Settings menu to set whether  
or not to use each function.  
僅 Do not apply license plate frame or  
objects, such as a bumper sticker, film  
僅 If 'Active Assist' is selected, the func-  
tion will warn the driver with a warn  
-
or a bumper guard near the rear cor  
-
ing message, an audible warning,  
ner radar.  
steering wheel vibration and braking  
assist will be applied depending on  
the collision risk levels.  
僅 The function may not work properly if  
the bumper has been replaced, or the  
surroundings of the rear corner radar  
has been damaged or paint has been  
applied.  
僅 If 'Warning Only' is selected, the func  
-
tion will warn the driver with a warn  
-
ing message, an audible warning and  
steering wheel vibration depending  
on the collision risk levels. Braking will  
not be assisted.  
僅 If a trailer, carrier, etc. is installed, it  
may adversely affect the performance  
of the rear corner radar or the func  
-
tion may not operate.  
僅 If 'Off' is selected, the function will  
turn off.  
NOTICE  
For more details on the precautions of  
the front view camera, refer to "Forward  
5
Collision-Avoidance Assist (FCA) (Sen  
-
sor fusion) (if equipped)" on page 5-74.  
Blind-Spot Collision-Avoidance  
Assist Settings  
Blind-Spot Safety  
OMQ4050293L  
When the engine is restarted with the  
function off, the 'Blind-Spot Safety Sys  
tem is Off' message will appear on the  
cluster.  
-
If you change the setting from 'Off' to  
'Active Assist' or 'Warning Only', the  
warning light on the side view mirror will  
blink for approximately 3 seconds.  
In addition, if the engine is turned on,  
when the function is set to 'Active Assist'  
or 'Warning Only', the warning light on  
OMQ4A050340  
the side view mirror will blink for approx  
-
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Blind-Spot Safety'  
imately 3 seconds.  
5
97  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
Warning Methods  
WARNING  
僅 'If 'Warning Only' is selected, braking  
is not assisted.  
僅 If 'Off' is selected, the driver should  
always be aware of the surroundings  
and drive safely.  
NOTICE  
If the engine is restarted, Blind-Spot Col  
lision-Avoidance Assist will maintain the  
last setting.  
-
OMQ4A052388  
Warning Timing  
OMQ4041606  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
vation time for Blind-Spot Collision-  
Avoidance Assist.  
When the vehicle is first delivered, Warn  
ing Timing is set to 'Normal. If you  
change the Warning Timing, the warning  
time of other Driver Assistance systems  
may change.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
-
-
-
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
-
-
-
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
5
98  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
→ Haptic warning' on the Infotain  
-
Blind-Spot Collision-Avoidance  
Assist Operation  
ment system.  
僅 Driving Safety Priority : Select ‘Vehicle  
Warning and control  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
Vehicle detection  
driving, the audio volume will tempo  
-
rarily decrease to warn the driver with  
the audible warning.  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
OMQ4050098  
Vibration Warning, the Warning Vol  
-
僅 To warn the driver a vehicle is  
detected, the warning light on the side  
view mirror and head-up display (if  
equipped) will appear.  
僅 The function will operate when your  
vehicle speed is above 20 km/h (12  
mph) and the speed of the vehicle in  
the blind spot area is above 10 km/h  
(7 mph).  
5
ume will be activated with volume '2'  
or 'Medium'.  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
vated.  
僅 The setting menu may not be avail  
able for your vehicle depending on  
-
-
the vehicle features and specifica  
-
Collision Warning  
僅 Collision Warning will operate when  
the turn signal is turned on in the  
direction of the detected vehicle.  
僅 If 'Warning Only' is selected from the  
Settings menu, the collision warning  
will operate when your vehicle  
approaches the lane the blind spot  
vehicle is detected.  
tions.  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 To warn the driver of a collision, the  
warning light on the side view mirror  
and head-up display (if equipped) will  
blink. At the same time, an audible  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
5
99  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
warning will sound and the steering  
wheel will vibrate.  
僅 When the turn signal is turned off, the  
collision warning will be canceled and  
the function will return to vehicle  
detection state.  
Collision-Avoidance Assist (while  
driving)  
NOTICE  
僅 The detecting range of the rear corner  
radar is determined by a standard  
road width, therefore, on a narrow  
road, the function may detect other  
vehicles in the next lane and warn  
you. In contrast, on a wide road, the  
function may not be able to detect a  
vehicle driving in the next lane and  
may not warn you.  
OMQ4051281L  
僅 To warn the driver of a collision, the  
warning light on the side view mirror  
will blink and a warning message will  
appear on the cluster. At the same  
time, an audible warning will sound,  
warning light on the head-up display  
僅 When the hazard warning flasher is  
on, the collision warning by the turn  
signal will not operate.  
(if equipped) will blink and the steer  
ing wheel will vibrate.  
-
NOTICE  
If the driver's seat is on the left side, the  
collision warning may occur when you  
turn left. Maintain a proper distance with  
the vehicles in the left lane. If the driver's  
seat is on the right side, the collision  
warning may occur when you turn right.  
Maintain a proper distance with the  
vehicles in the right lane.  
僅 The function will operate when your  
vehicle speed is between 60 ~ 200  
km/h (40 ~ 120 mph) and both lane  
markings of the driving lane are  
detected.  
僅 Emergency braking will be assisted to  
help prevent collision with the vehicle  
in the blind spot area.  
NOTICE  
僅 Collision-Avoidance Assist will be can  
-
celed under the following circum  
-
stances:  
- Your vehicle enters the next lane by  
a certain distance  
- Your vehicle is away from the colli  
-
sion risk  
- The steering wheel is sharply  
steered  
- The brake pedal is depressed  
5
100  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
- Forward Collision-Avoidance Assist  
is operating  
僅 After Function Operation or changing  
lane, you must drive to the center of  
the lane. The function will not operate  
Stopping vehicle and ending  
brake control  
if the vehicle is not driven in the cen  
-
ter of the lane.  
Collision-Avoidance Assist (while  
departing)  
OMQ4040504L  
僅 When the vehicle is stopped due to  
emergency braking, the 'Drive care  
-
fully' warning message will appear on  
the cluster.  
僅 For your safety, the driver should  
depress the brake pedal immediately  
and check the surroundings.  
5
僅 Brake control will end after the vehicle  
is stopped by emergency braking for  
approximately 2 seconds.  
OMQ4AH051311  
僅 To warn the driver of a collision, the  
warning light on the side view mirror  
will blink and a warning message will  
appear on the cluster. At the same  
time, an audible warning will sound,  
warning light on the head-up display  
WARNING  
Take the following precautions when  
using Blind-Spot Collision-Avoidance  
Assist:  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
(if equipped) will blink and the steer  
ing wheel will vibrate.  
-
僅 Blind-Spot Collision-Avoidance Assist  
will operate when your vehicle speed  
is below 3 km/h (2 mph) and the  
speed of the vehicle in the blind spot  
area is above 5 km/h (3 mph).  
僅 Emergency braking will be assisted to  
help prevent collision with the vehicle  
in the blind spot area.  
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
is generated, Blind-Spot Collision-  
Avoidance Assist's warning message  
may not be displayed and audible  
warning may not be generated.  
僅 You may not hear the warning sound  
of Blind-Spot Collision-Avoidance  
Assist if the surrounding is noisy.  
5
101  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
僅 Blind-Spot Collision-Avoidance Assist  
may not operate if the driver applies  
the brake pedal to avoid collision.  
僅 There will only be a warning when:  
- The ESC (Electronic Stability Con  
trol) warning light is on  
-
僅 When Blind-Spot Collision-Avoidance  
Assist is operating, braking control by  
the function will automatically cancel  
when the driver excessively depresses  
the accelerator pedal or sharply steers  
the vehicle.  
僅 During Blind-Spot Collision-Avoidance  
Assist operation, the vehicle may stop  
suddenly injuring passengers and  
shifting loose objects. Always have the  
seat belt on and keep loose objects  
secured.  
- ESC (Electronic Stability Control) is  
engaged in a different function  
Blind-Spot Collision-Avoidance  
Assist Malfunction and Limita  
-
tions  
Blind-Spot Collision-Avoidance  
Assist malfunction  
僅 Even if there is a problem with Blind-  
Spot Collision-Avoidance Assist, the  
vehicle's basic braking performance  
will operate normally.  
僅 Blind-Spot Collision-Avoidance Assist  
does not operate in all situations or  
cannot avoid all collisions.  
僅 Blind-Spot Collision-Avoidance Assist  
may warn the driver late or may not  
warn the driver depending on the  
road and driving conditions.  
僅 Driver should maintain control of the  
vehicle at all times. Do not depend on  
Blind-Spot Collision-Avoidance Assist.  
Maintain a safe braking distance, and  
if necessary, depress the brake pedal  
to reduce driving speed or to stop the  
vehicle.  
OMQ4050229L  
When Blind-Spot Collision-Avoidance  
Assist is not working properly, the  
'Check Blind-Spot Safety system' warn  
ing message will appear on the cluster,  
and the function will turn off automati  
cally or the function will be limited. Have  
the function inspected by an authorized  
Kia dealer.  
-
-
僅 Never operate Blind-Spot Collision-  
Avoidance Assist on people, animal,  
objects, etc. It may cause serious  
injury or death.  
NOTICE  
僅 The brake control may not operate  
properly depending on the status of  
ESC (Electronic Stability Control).  
5
102  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
The function will operate normally when  
such foreign material or trailer, etc. is  
removed, and then the engine is  
restarted.  
If the function does not operate normally  
after it is removed, have the function  
inspected by an authorized Kia dealer.  
NOTICE  
僅 Even though the warning message  
does not appear on the cluster, Blind-  
Spot Collision-Avoidance Assist may  
not properly operate.  
OMQ4050291L  
When the side view mirror warning light  
is not working properly, the 'Check side  
view mirror warning light' warning mes  
sage will appear on the cluster. Have the  
function inspected by an authorized Kia  
dealer.  
僅 Blind-Spot Collision-Avoidance Assist  
may not properly operate in an area  
-
(e.g. open terrain) where any sub  
-
stance are not detected right after the  
engine is turned on, or when the  
detecting sensor is blocked with for  
-
5
eign material right after the engine is  
turned on.  
Blind-Spot Collision-Avoidance  
Assist disabled  
CAUTION  
Turn off Blind-Spot Collision-Avoidance  
Assist to install a trailer, carrier, etc., or  
remove the trailer, carrier, etc. to use  
Blind-Spot Collision-Avoidance Assist.  
Limitations of Blind-Spot Colli  
sion- Avoidance Assist  
-
Blind-Spot Collision-Avoidance Assist  
may not operate normally, or the func  
tion may operate unexpectedly under  
the following circumstances:  
僅 There is inclement weather, such as  
heavy snow, heavy rain, etc.  
僅 The rear corner radar is covered with  
snow, rain, dirt, etc.  
僅 The temperature around the rear cor  
ner radar is high or low  
-
OMQ4050292L  
When the rear bumper around the rear  
corner radar or sensor is covered with  
foreign material, such as snow or rain, or  
installing a trailer or carrier, it can reduce  
the detecting performance and tempo  
-
rarily limit or disable Blind-Spot Colli  
-
-
sion-Avoidance Assist.  
If this occurs, the 'Blind-Spot Safety  
僅 Driving on a highway (or motorway)  
ramp  
Function disabled. Radar blocked' warn  
-
ing message will appear on the cluster.  
5
103  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
僅 The road pavement (or the peripheral  
ground) abnormally contains metallic  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
-
components (i.e. possibly due to sub  
-
way construction).  
Blind-Spot Collision-Avoidance Assist  
may not operate normally, or the func  
tion may operate unexpectedly when  
the following objects are detected:  
僅 There is a fixed object near the vehi  
-
-
cle, such as sound barriers, guardrails,  
central dividers, entry barriers, street  
lamps, signs, tunnels, walls, etc.  
(including double structures)  
僅 A motorcycle or bicycle is detected  
僅 A vehicle such as a flat trailer is  
detected  
僅 A big vehicle such as a bus or truck is  
detected  
僅 Driving in large areas where there are  
few vehicles or structures (i.e. desert,  
meadow, suburb, etc.)  
僅 Driving through a narrow road where  
trees or grass are overgrown  
僅 A moving obstacle such as a pedes  
-
trian, animal, shopping cart or a baby  
stroller is detected  
僅 Driving on a wet road surface, such as  
a puddle on the road  
僅 A vehicle with low height such as a  
sports car is detected  
僅 The other vehicle drives very close  
behind your vehicle, or the other vehi  
cle passes by your vehicle in close  
proximity  
-
Braking control may not work, driver's  
attention is required in the following cir  
-
cumstances:  
僅 The speed of the other vehicle is very  
fast that it passes by your vehicle in a  
short time  
僅 The vehicle severely vibrates while  
driving over a bumpy road, uneven  
road or concrete patch  
僅 Driving on a slippery surface due to  
snow, water puddle, ice, etc.  
僅 The tire pressure is low or a tire is  
damaged  
僅 The brake is reworked  
僅 Your vehicle passes by the other vehi  
-
cle  
僅 Your vehicle changes lane  
僅 Your vehicle has started at the same  
time as the vehicle next to you and  
has accelerated  
僅 The vehicle in the next lane moves  
two lanes away from you, or when the  
vehicle two lanes away moves to the  
next lane from you  
僅 A trailer or carrier is installed around  
the rear corner radar  
僅 The bumper around the rear corner  
radar is covered with objects, such as  
a bumper sticker, bumper guard, bike  
rack, etc.  
僅 The vehicle makes abrupt lane  
changes  
CAUTION  
For more details on the limitations of the  
front view camera, refer to "Forward Col  
lision-Avoidance Assist (FCA) (Front view  
camera only) (if equipped)" on page 5-  
62.  
-
WARNING  
僅 Driving on a curved road  
僅 The bumper around the rear corner  
radar is impacted, damaged or the  
radar is out of position  
5
104  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
OMQ4H052616  
OMQ4H052618  
Blind-Spot Collision-Avoidance Assist  
Blind-Spot Collision-Avoidance Assist  
may not operate properly when driv  
-
may not operate properly when driv-  
ing on a curved road. The function  
may not detect the vehicle in the next  
lane.  
ing where the road merges or divides.  
The function may not detect the vehi  
-
cle in the next lane.  
Always pay attention to road and driv  
ing conditions while driving.  
-
Always pay attention to road and driv  
ing conditions while driving.  
僅 Driving on an inclined road  
-
5
OMQ4H052617  
OMQ4H052619  
Blind-Spot Collision-Avoidance Assist  
may not operate properly when driv  
-
Blind-Spot Safety system may not  
operate properly when driving on a  
slope. The function may not detect  
the vehicle in the next lane or may  
incorrectly detect the ground or struc  
ture.  
ing on a curved road. The function  
may recognize a vehicle in the same  
lane.  
Always pay attention to road and driv  
ing conditions while driving.  
-
-
-
僅 Driving where the road is merging/  
dividing  
Always pay attention to road and driv  
ing conditions while driving.  
僅 Driving where the heights of the lanes  
are different  
5
105  
Driving your vehicle  
Blind-Spot Collision-Avoidance Assist (BCA)  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
Operation is subject to the following  
conditions:  
1. This device may not cause interfer  
-
ence, and  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
OMQ4H052620  
Blind-Spot Collision-Avoidance Assist  
may not operate properly when driv  
-
ing where the heights of the lanes are  
different. The function may not detect  
the vehicle on a road with different  
lane heights (underpass joining sec  
tion, grade separated intersections,  
etc.).  
-
Always pay attention to road and driv  
ing conditions while driving.  
-
WARNING  
僅 When you are towing a trailer or  
another vehicle, make sure that you  
turn off Blind-Spot Collision-Avoid  
-
ance Assist.  
僅 Blind-Spot Collision-Avoidance Assist  
may not operate normally if interfered  
by strong electromagnetic waves.  
僅 Blind-Spot Collision-Avoidance Assist  
may not operate for approximately 15  
seconds after the vehicle is started, or  
the front view camera or rear corner  
radars are initialized.  
5
106  
Driving your vehicle  
Safe Exit Warning (SEW)  
Refer to the picture above for the  
Safe Exit Warning (SEW) (if  
equipped)  
detailed location of the detecting sensor.  
NOTICE  
For more details on the precautions of  
the rear corner radars, refer to "Blind-  
Spot Collision-Avoidance Assist (BCA) (if  
equipped)" on page 5-95.  
Safe Exit Warning Settings  
Safe Exit Warning  
OMQ4H052621  
After the vehicle stops, when an  
approaching vehicle from the rear area  
is detected as soon as a passenger  
opens a door, Safe Exit Warning will  
warn the driver with a warning message  
and an audible warning to help prevent  
a collision.  
5
NOTICE  
OMQ4A051336N  
Warning Timing may vary depending on  
the speed of the approaching vehicle.  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Blind-Spot Safety → Safe Exit Warn  
ing from the Settings menu to turn on  
Safe Exit Warning and deselect to turn  
off the function.  
-
Detecting sensor  
Rear corner radar  
NOTICE  
The driver should always be aware of  
unexpected and sudden situations from  
occurring. If 'Safe Exit Warning' is dese  
-
lected, the function cannot assist you.  
NOTICE  
If the engine is restarted, Safe Exit Warn  
-
ing will maintain the last setting.  
OMQ4A042598  
5
107  
Driving your vehicle  
Safe Exit Warning (SEW)  
rarily decrease to warn the driver with  
the audible warning.  
Warning Methods  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
tions.  
OMQ4A052388  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
OMQ4041606  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
Safe Exit Warning Operation  
Warning  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
-
Collision Warning when exiting  
vehicle  
-
-
-
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
driving, the audio volume will tempo  
-
OMQ4040505L  
5
108  
Driving your vehicle  
Safe Exit Warning (SEW)  
僅 When an approaching vehicle from  
the rear is detected at the moment a  
door is opened, the 'Watch for traffic'  
warning message will appear on the  
cluster, and an audible warning will  
sound.  
僅 Safe Exit Warning will warn the driver  
when your vehicle speed is below 3  
km/h (2 mph), and the speed of the  
approaching vehicle from the rear is  
above 5 km/h (3 mph).  
僅 Safe Exit Warning does not operate if  
there is a problem with Blind-Spot  
Collision-Avoidance Assist. The warn  
ing message of Blind-Spot Collision-  
Avoidance Assist will appear when:  
-
- Blind-Spot Collision-Avoidance  
Assist sensor or the sensor sur-  
rounding is polluted or covered  
- Blind-Spot Collision-Avoidance  
Assist fails to warn passengers or  
falsely warn passengers  
NOTICE  
Take the following precautions when  
using Safe Exit Warning :  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
NOTICE  
After the engine is turned off, Safe Exit  
Warning operates approximately for 3  
minutes, but turns off immediately if the  
doors are locked.  
僅 If any other function's warning mes  
-
5
sage is displayed or audible warning  
is generated, Safe Exit Warning warn  
ing message may not be displayed  
and audible warning may not be gen  
erated.  
-
-
僅 You may not hear the warning sound  
of Safe Exit Warning if the surround  
-
ings are noisy.  
僅 Safe Exit Warning does not operate in  
all situations or cannot prevent all col  
lisions.  
-
僅 Safe Exit Warning may warn the  
driver late or may not warn the driver  
depending on the road and driving  
conditions. Always check vehicle sur  
-
roundings.  
僅 The driver and passengers are  
responsible for accidents that occur  
while exiting the vehicle. Always check  
the surroundings before you exit the  
vehicle.  
僅 Never deliberately operate Safe Exit  
Warning. Doing so may lead to serious  
injury or death.  
5
109  
Driving your vehicle  
Safe Exit Assist (SEA)  
Safe Exit Assist (SEA) (if  
equipped)  
CAUTION  
Warning Timing may vary depending on  
the speed of the approaching vehicle.  
Detecting sensor  
Rear corner radar  
OMQ4H052632  
After the vehicle stops, when an  
approaching vehicle from the rear area  
is detected as soon as a passenger  
opens a door, Safe Exit Assist will warn  
the driver with a warning message and  
an audible warning to help prevent a  
collision.  
OMQ4A042598  
Refer to the picture above for the  
detailed location of the detecting sensor.  
NOTICE  
For more details on the precautions of  
the rear corner radars, refer to "Blind-  
Spot Collision-Avoidance Assist (BCA) (if  
equipped)" on page 5-95.  
OMQ4AH040008  
In addition, when the electronic child  
safety lock button is in the LOCK posi  
-
tion and an approaching vehicle from  
the rear area is detected, the electronic  
child safety lock button will not unlock  
even if the driver presses the button to  
prevent the rear doors from opening.  
5
110  
Driving your vehicle  
Safe Exit Assist (SEA)  
Safe Exit Assist Settings  
Safe Exit Assist  
Warning Methods  
OMQ4A052388  
OMQ4A051336N  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Blind-Spot Safety → Safe Exit Assist'  
from the Settings menu to turn on Safe  
Exit Assist and deselect to turn off the  
function.  
5
NOTICE  
The driver should always be aware of  
unexpected and sudden situations from  
OMQ4041606  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
occurring. If 'Safe Exit Assist' is dese  
-
lected, the function cannot assist you.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
-
NOTICE  
If the engine is restarted, Safe Exit Assist  
will maintain the last setting.  
-
-
-
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
driving, the audio volume will tempo  
-
5
111  
Driving your vehicle  
Safe Exit Assist (SEA)  
rarily decrease to warn the driver with  
the audible warning.  
僅 When an approaching vehicle from  
the rear is detected at the moment a  
door is opened, the 'Watch for traffic'  
warning message will appear on the  
cluster, and an audible warning will  
sound.  
僅 Safe Exit Assist will warn the driver  
when your vehicle speed is below 3  
km/h (2 mph), and the speed of the  
approaching vehicle from the rear is  
above 5 km/h (3 mph).  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
tions.  
-
Safe Exit Assist linked with Elec  
tronic child safety lock  
-
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
Safe Exit Assist Operation  
Warning and control  
OMQ4040506L  
僅 When Electric child safety lock is oper  
ating and an approaching vehicle  
from the rear area is detected, the  
rear doors cannot be unlocked even if  
the driver tries to unlock the rear  
doors using the electronic child safety  
lock button. The 'Check surroundings  
then try again' warning message will  
appear on the cluster.  
-
Collision Warning when exiting  
vehicle  
僅 Safe Exit Assist will warn the driver  
when vehicle speed is below 3 km/h (2  
mph) and the speed of the approach  
ing vehicle from the rear is above 5  
km/h (3 mph).  
-
僅 For more details on electric child  
safety lock button, refer to "Electronic  
OMQ4040505L  
5
112  
Driving your vehicle  
Safe Exit Assist (SEA)  
child safety lock system (if equipped)"  
on page 4-22.  
the surroundings before you exit the  
vehicle.  
僅 Never deliberately operate Safe Exit  
Assist. Doing so may lead to serious  
injury or death.  
僅 Safe Exit Assist does not operate if  
there is a problem with Blind-Spot  
Collision-Avoidance Assist.  
- The warning message of Blind-Spot  
Collision-Avoidance Assist will  
appears  
CAUTION  
If the driver presses the electronic child  
lock button again approximately within  
10 seconds after the warning message  
appears, Safe Exit Assist judges that the  
driver has unlocked the doors acknowl  
edging the rear status. The electronic  
child safety lock will turn off (button indi  
cator OFF) and the rear doors will  
unlock. Always check the surroundings  
before turning off the electronic child  
safety lock button.  
-
-
- Blind-Spot Collision-Avoidance  
Assist sensor or the sensor sur  
-
rounding is polluted or covered  
- Blind-Spot Collision-Avoidance  
Assist fails to warn passengers or  
falsely warn passengers  
WARNING  
Take the following precautions when  
using Safe Exit Assist:  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
5
NOTICE  
After the engine is turned off, Safe Exit  
Assist operates approximately for 3 min  
utes, but turns off immediately if the  
doors are locked.  
-
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
is generated, Safe Exit Assist warning  
message may not be displayed and  
Safe Exit Assist Malfunction and  
Limitations  
audible warning may not be gener  
ated.  
僅 You may not hear the warning sound  
of Safe Exit Assist if the surroundings  
are noisy.  
-
Safe Exit Assist malfunction  
僅 Safe Exit Assist does not operate in all  
situations and/or cannot prevent all  
collisions.  
僅 Safe Exit Assist may warn the driver  
late or may not warn the driver  
depending on the road and driving  
conditions. Always check vehicle sur  
-
roundings.  
僅 The driver and passengers are  
OMQ4050229L  
responsible for accidents that occurs  
while exiting the vehicle. Always check  
When Safe Exit Assist is not working  
properly, the 'Check Blind-Spot Safety  
5
113  
Driving your vehicle  
Safe Exit Assist (SEA)  
system' warning message will appear on  
the cluster, and the function will turn off  
automatically or the function will be lim  
ited. Have the function inspected by an  
authorized Kia dealer.  
installing a trailer or carrier, it can reduce  
the detecting performance and tempo  
-
-
rarily limit or disable Safe Exit Assist.  
If this occurs, the 'Blind-Spot Safety sys  
tem disabled. Radar blocked' warning  
message will appear on the cluster.  
-
The function will operate normally when  
such foreign matters or trailer, etc. is  
removed. Always keep it clean.  
If the function does not operate normally  
after it is removed, have your vehicle  
inspected by an authorized Kia dealer.  
NOTICE  
僅 Even though the warning message  
does not appear on the cluster, Safe  
Exit Assist may not properly operate.  
僅 Safe Exit Assist may not properly  
operate in an area (e.g., open terrain),  
where any substance are not detected  
after turning ON the engine.  
OMQ4050291L  
When the side view mirror warning light  
is not working properly, the `Check side  
view mirror warning light' warning mes  
sage will appear on the cluster for sev  
eral seconds, and the master (  
-
-
)
warning light will appear on the cluster.  
If the master warning light appears,  
CAUTION  
Turn off Safe Exit Assist to install a  
trailer, carrier, etc., or remove the trailer,  
carrier, etc. to use Safe Exit Assist.  
have the vehicle inspected by an autho  
-
rized Kia dealer.  
Safe Exit Assist disabled  
Limitations of Safe Exit Assist  
Safe Exit Assist may not operate nor  
-
mally, or the function may operate unex  
pectedly under the following  
circumstances:  
-
僅 Driving through a narrow road where  
trees or grass or overgrown  
僅 Driving on a wet road surface, such as  
a puddle in the road  
僅 The speed of the other vehicle is very  
fast or slow  
OMQ4050292L  
NOTICE  
For more details on the precautions of  
the rear corner radars, refer to "Blind-  
When the rear bumper around the rear  
corner radar or sensor is covered with  
foreign matter, such as snow or rain, or  
5
114  
Driving your vehicle  
Manual Speed Limit Assist (MSLA)  
Spot Collision-Avoidance Assist (BCA) (if  
equipped)" on page 5-95.  
Manual Speed Limit Assist  
(MSLA)  
NOTICE  
僅 Safe Exit Assist may not operate nor  
-
mally if interfered by strong electro  
-
magnetic waves.  
僅 Safe Exit Assist may not operate for  
approximately 3 seconds after the  
vehicle is started, or the rear corner  
radars are initialized.  
OMQ4AH050312  
(1) Speed Limit indicator  
(2) Set speed  
You can set the speed limit when you do  
not want to drive over a specific speed.  
5
If you drive over the preset speed limit,  
the warning function operates (set  
speed limit will blink and chime will  
sound) until the vehicle speed returns  
within the speed limit.  
Manual Speed Limit Assist Opera  
tion  
-
Setting speed limit  
1. Press and hold Driving Assist  
(
) button at the desired  
speed.  
5
115  
Driving your vehicle  
Manual Speed Limit Assist (MSLA)  
OMQ4051128L  
OMQ4051130L  
3. The set speed limit will be displayed  
on the cluster.  
The speed limit indicator (  
will appear on the cluster.  
)
The set speed limit will blink and  
chime will sound until you return the  
vehicle speed within the speed limit.  
2. Push the + switch up or - switch down,  
and release it at the desired speed.  
Push the + switch up or - switch down  
and hold it. The speed will increase or  
decrease to the nearest multiple of  
five (multiple of ten in km/h) at first,  
and then increase or decrease by 10  
km/h (5 mph).  
OMQ4AH050346  
NOTICE  
When the accelerator pedal is not  
depressed beyond the full stroke, vehi  
-
cle speed will maintain within the speed  
limit.  
OMQ4051129L  
5
116  
Driving your vehicle  
Manual Speed Limit Assist (MSLA)  
To temporarily pause Manual  
Speed Limit Assist  
To turn off Manual Speed Limit  
Assist  
OMQ4051326L  
OMQ4051128L  
Press the (  
pause the set speed limit. The set speed  
limit will turn off but the Speed Limit  
) button to temporarily  
Press the Driving Assist (  
ton to turn Manual Speed Limit Assist  
off. The Speed Limit indicator  
) will go off.  
Always press the Driving Assist  
) button to turn Manual Speed  
) but-  
indicator (  
) will stay on.  
(
5
To resume Manual Speed Limit  
Assist  
(
Limit Assist off when not in use.  
WARNING  
Take the following precautions when  
using Manual Speed Limit Assist:  
僅 Always set the vehicle speed to the  
speed limit in your country.  
僅 Keep Manual Speed Limit Assist off  
when the function is not in use, to  
avoid inadvertently setting a speed.  
Check that the Speed Limit indicator  
OMQ4050205L  
To resume Manual Speed Limit Assist  
after the function was paused, operate  
the +, -, (  
) switch.  
If you push the + switch up or – switch  
down, vehicle speed will be set to the  
current speed on the cluster.  
(
) is off.  
僅 Manual Speed Limit Assist does not  
substitute for proper and safe driving.  
It is the responsibility of the driver to  
always drive safely and should always  
be aware of unexpected and sudden  
situations from occurring. Pay atten  
tion to the road conditions at all times.  
If you press the (  
) button, vehicle  
speed will resume to the preset speed.  
-
5
117  
Driving your vehicle  
Intelligent Speed Limit Assist (ISLA)  
Intelligent Speed Limit Assist Set  
tings  
-
Intelligent Speed Limit Assist  
(ISLA) (if equipped)  
Intelligent Speed Limit Assist uses infor  
-
Speed limit  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Intelligent Speed  
Limit Assist' from the Settings menu to  
set whether or not to use each function.  
mation from the detected road sign and  
navigation system to inform the driver of  
the speed limit and additional road signs  
of the current road. Also, the function  
helps the driver to maintain within the  
speed limit of the road.  
僅 If 'Speed Limit Assist' is selected, the  
function will inform the driver of  
speed limit. In addition, the function  
will inform the driver to change set  
speed of Manual Speed Limit Assist  
and/or Smart Cruise Control to help  
the driver stay within the speed limit.  
僅 If 'Speed Limit Warning' is selected,  
the function will inform the driver of  
speed limit. In addition, the function  
will warn the driver when the vehicle  
is driven faster than the speed limit.  
僅 If 'Off' is selected, the function will  
turn off.  
NOTICE  
僅 Intelligent Speed Limit Assist may not  
operate properly if the function is  
used in other countries.  
僅 Update navigation system regularly  
for Intelligent Speed Limit Assist to  
operate normally.  
Detecting sensor  
Front view camera  
Speed limit offset  
With the ENGINE START/STOP button in  
the ON position, when 'Driver Assistance  
→ Speed Limit → Speed Limit Offset' is  
selected, the Speed Limit Offset can be  
changed. Speed Limit Warning and  
Speed Limit Assist will operate by apply  
-
ing the Speed Limit Offset setting to the  
detected speed limit.  
OMQ4051078  
Refer to the picture above for the  
detailed location of the detecting sensor.  
WARNING  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
僅 Speed Limit Assist function operates  
based on the Offset setting added to  
the speed limit. If you want to change  
NOTICE  
For more details on the precautions of  
the front view camera, refer to "Forward  
Collision-Avoidance Assist (FCA) (Sen  
sor fusion) (if equipped)" on page 5-74.  
-
5
118  
Driving your vehicle  
Intelligent Speed Limit Assist (ISLA)  
the set speed according to the speed  
limit, set the offset to '0'.  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 Speed Limit Warning function warns  
the driver when driving speed  
exceeds the speed at which the set  
Offset is added to speed limit. If you  
want Speed Limit Warning to warn  
you immediately when the driving  
speed exceeds the speed limit, set the  
offset to '0'.  
僅 Warning Volume: Select 'User Settings  
→ Driver Assistance → Warning Vol  
-
ume' on the instrument cluster or 'Set  
-
tings → Vehicle → Driver Assistance  
→ Warning Methods' on the infotain  
-
ment system to change the Warning  
Methods. Even if '0' or 'Off' is selected,  
the function's Warning Volume will  
not turn off but the volume will sound  
as '1' or 'Low'.  
NOTICE  
The setting of 'Speed Offset' is not  
reflected in Navigation-based Smart  
Cruise Control (NSCC).  
NOTICE  
僅 Ensure that Warning Sound and Hap  
-
tic you have set may apply to the  
Warning volume of other Driver Assis  
tance systems.  
-
Warning Methods  
5
僅 Warning Sound and Haptic will main  
-
tain its last setting even if the vehicle  
is restarted.  
僅 If vehicle is not equipped with the  
navigation system, select 'User Set  
-
tings → Driver Assistance' to adjust  
the Warning Volume.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
tions.  
OMQ4A052388  
僅 Descriptions of each Driver Assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 Depending on your update, the menu  
may be displayed as 'Warning Sound'  
or 'Warning Methods'.  
OMQ4041606  
5
119  
Driving your vehicle  
Intelligent Speed Limit Assist (ISLA)  
Intelligent Speed Limit Assist  
Operation  
Changing set speed  
Warning and control  
Intelligent Speed Limit Assist will warn  
and control the vehicle by 'Displaying  
speed limit' and 'Changing set speed'.  
NOTICE  
僅 Function warning and control are  
described based on the Offset set to  
'0'. For details on Offset setting, refer  
to "Intelligent Speed Limit Assist Set  
-
OMQ4A050357  
tings" on page 5-118.  
Displaying speed limit  
OMQ4A050358  
If the speed limit of the road changes  
during the operation of Manual Speed  
Limit Assist or Smart Cruise Control, an  
arrow in the direction of up or down is  
displayed to inform the driver that the  
set speed needs to be changed. At this  
time, the driver can change the set  
speed according to the speed limit by  
using the + or – switch on the steering  
wheel.  
OMQ4AH050337  
Speed limit information is displayed on  
the instrument cluster.  
NOTICE  
Depending on the instrument panel  
specifications or theme, images or colors  
may be displayed differently.  
WARNING  
僅 If the Offset is set over '0', the set  
speed will change to a higher speed  
than the speed limit of the road. If you  
want to drive below the speed limit,  
set the Offset under '0' or use the –  
switch on the steering wheel to lower  
the set speed.  
5
120  
Driving your vehicle  
Intelligent Speed Limit Assist (ISLA)  
僅 Even after changing the set speed  
according to the speed limit of the  
road, the vehicle can still be driven  
over the speed limit. If necessary,  
depress the brake pedal to reduce  
your driving speed.  
Intelligent Speed Limit Assist  
Malfunction and Limitations  
Intelligent Speed Limit Assist  
malfunction  
僅 If the speed limit of the road is under  
30 km/h (20 mph), the set speed  
change function will not work.  
僅 Intelligent Speed Limit Assist oper  
-
ates using the speed unit in the instru  
ment cluster set by the driver. If the  
speed unit is set to a unit other than  
the speed unit used in your country,  
-
Intelligent Speed Limit Assist may not  
operate properly.  
OMQ4050304L  
When Intelligent Speed Limit Assist is not  
working properly, the warning message  
will appear on the cluster for several sec  
onds. If this occurs, have the function  
checked by an authorized Kia dealer.  
NOTICE  
僅 For more details on function opera  
tion of Manual Speed Limit Assist,  
refer to "Manual Speed Limit Assist  
(MSLA)" on page 5-115.  
-
5
-
僅 For more details on operation of  
Smart Cruise Control, refer to "Smart  
Cruise Control (SCC) (if equipped)" on  
page 5-134.  
Intelligent Speed Limit Assist dis  
abled  
-
OMQ4050305L  
When the front windshield where the  
front view camera is located is covered  
with foreign material, such as snow or  
rain, it can reduce the detecting perfor  
mance and temporarily limit or disable  
Intelligent Speed Limit Assist.  
-
5
121  
Driving your vehicle  
Intelligent Speed Limit Assist (ISLA)  
If this occurs the 'Speed limit system dis  
-
- A sign is attached to another vehi  
-
abled. Camera obscured' warning mes  
sage will appear on the cluster. The  
function will operate normally when  
snow, rain or foreign material is  
removed.  
-
cle  
僅 The distance between the vehicle and  
the road signs is too far  
僅 The brightness changes suddenly, for  
example when entering or exiting a  
tunnel or passing under a bridge  
僅 Headlamps are not used or the bright  
ness of the headlamps are weak at  
night or in the tunnel  
If Intelligent Speed Limit Assist does not  
operate normally after it is removed,  
-
have the function checked by an autho  
rized Kia dealer.  
-
僅 Road signs are difficult to recognize  
due to the reflection of sunlight, street  
lights, or oncoming vehicles  
僅 The field of view of the Front view  
camera is obstructed by sun glare  
NOTICE  
Even though the warning message or  
warning light does not appear on the  
cluster, Intelligent Speed Limit Assist  
may not operate properly.  
僅 Driving on a road that is sharply  
curved or continuously curved  
Limitations of Intelligent Speed  
Limit Assist  
Intelligent Speed Limit Assist may not  
operate normally, or the function may  
operate unexpectedly under the follow  
ing circumstances :  
僅 The road sign is contaminated or  
indistinguishable  
- The road sign is difficult to see due  
to bad weather, such as rain, snow,  
fog, etc.  
- The road sign is not clear or dam  
aged  
- The road sign is partially obscured  
by surrounding objects or shadow  
僅 The road signs do not conform to the  
standard  
- The text or picture on the road sign  
is different from the standard  
- The road sign is installed between  
the main line and the exit road or  
between diverging roads  
僅 Driving through speed bumps, or driv  
ing up and down or left to right on  
steep inclines  
-
僅 The vehicle is shaking heavily  
-
僅 Intelligent Speed Limit Assist incor  
-
rectly recognizes numbers in the  
street signals or other signs as the  
speed limit  
僅 There is an error in the navigation  
map information or GPS information  
僅 The driver is not driving along the  
navigation guide route  
僅 Driving on a newly opened road  
僅 The navigation information or GPS  
information contain errors.  
僅 The minimum speed limit sign is on  
the road  
-
WARNING  
僅 Intelligent Speed Limit Assist is a sup  
plemental function that helps the  
driver to comply with the speed limit  
-
- A conditional road sign is not  
installed with a sign located on the  
road to enter or exit  
on the road, and may not display the  
correct speed limit or control the driv  
ing speed properly.  
-
5
122  
Driving your vehicle  
Driver Attention Warning (DAW)  
僅 Always set the vehicle speed to the  
speed limit in your country.  
Driver Attention Warning  
(DAW)  
NOTICE  
Basic function  
For more details on the limitations of the  
Driver Attention Warning will help deter  
-
-
front view camera, refer to "Forward Col  
lision-Avoidance Assist (FCA) (Front view  
camera only) (if equipped)" on page 5-  
62.  
-
mine the driver's attention level by ana  
lyzing driving pattern, driving time, etc.  
while vehicle is being driven. The func  
tion will recommend a break when the  
-
driver's attention level falls below a cer  
tain level.  
-
Leading vehicle departure alert  
function  
Leading Vehicle Departure Alert function  
will inform the driver when the front  
vehicle departs from a stop.  
5
Detecting sensor  
Front view camera  
OMQ4051078  
The front view camera is used as a  
detecting sensor to detect driving pat  
-
terns and front vehicle departure while  
vehicle is being driven.  
Refer to the picture above for the  
detailed location of the detecting sensor.  
5
123  
Driving your vehicle  
Driver Attention Warning (DAW)  
Leading Vehicle Departure Alert  
CAUTION  
Always keep the front view camera in  
good condition to maintain optimal per  
formance of Driver Attention Warning.  
-
For more details on the precautions of  
the front view camera, refer to "Forward  
Collision-Avoidance Assist (FCA) (Front  
view camera only) (if equipped)" on  
page 5-62.  
Driver Attention Warning Set  
tings  
-
OMQ4A050338  
僅 If 'Leading Vehicle Departure Alert' is  
selected, the function will inform the  
driver when the front vehicle departs  
from a stop.  
Driver Attention Warning  
Warning Timing  
OMQ4A051351N  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Driver Attention  
Warning' from the Settings menu to set  
whether or not to use each function.  
僅 If 'Inattentive Driving Warning' is  
selected, the function will inform the  
driver the driver's attention level and  
will recommend taking a break when  
the level falls below a certain level.  
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
vation time for Driver Attention Warning.  
When the vehicle is first delivered, Warn  
ing Timing is set to 'Normal'. If you  
change the Warning Timing, the warning  
time of other Driver Assistance systems  
may change.  
-
-
NOTICE  
If the engine is restarted, Driver Atten  
-
-
tion Warning will maintain the last set  
ting.  
5
124  
Driving your vehicle  
Driver Attention Warning (DAW)  
Standby  
NOTICE  
If the engine is restarted, Driver Warning  
Time will maintain the last setting.  
Driver Attention Warning Opera  
tion  
-
Basic function  
Display and warning  
The basic function of Driver Attention  
Warning is to inform the driver the  
'Attention Level' and to warn the driver  
'Consider taking a break'.  
OMQ4050117L  
Attentive driving  
Attention level  
Function off  
5
OMQ4050114L  
Inattentive driving  
OMQ4050113L  
OMQ4050115L  
僅 The driver can monitor his/her driving  
conditions on the cluster.  
5
125  
Driving your vehicle  
Driver Attention Warning (DAW)  
- When the 'Inattentive Driving Warn  
ing' is deselected from the Settings  
menu, 'System Off' is displayed.  
- The function will operate when  
vehicle speed is between 0 ~ 180  
km/h (0 ~ 110 mph).  
- When vehicle speed is not within  
the operating speed, the message  
'Standby' will be displayed.  
-
WARNING  
For your safety, change the Settings  
after parking the vehicle at a safe loca  
tion.  
-
CAUTION  
僅 Driver Attention Warning may suggest  
a break depending on the driver's  
driving pattern or habits, even if the  
driver doesn't feel fatigue.  
僅 The driver's attention level is dis  
-
played on the scale of 1 to 5. The  
lower the level is, the more inattentive  
the driver is.  
僅 Driver Attention Warning is a supple  
-
mental function and may not be able  
to determine whether the driver is  
inattentive.  
僅 The level decreases when the driver  
does not take a break for a certain  
period of time.  
僅 The driver who feels fatigued should  
take a break at a safe location, even  
though there is no break suggestion  
by Driver Attention Warning.  
Taking a break  
NOTICE  
僅 For more details on setting the func  
-
tions in the infotainment system, refer  
to the infotainment system manual.  
僅 Driver Attention Warning will reset the  
last break time to 00:00 in the follow  
-
ing situations:  
- The engine is turned off  
- The driver unfastens the seat belt  
and opens the driver's door.  
- The vehicle is stopped for more  
than 10 minutes.  
OMQ4050116L  
僅 The 'Consider taking a break' mes  
-
sage will appear on the cluster and an  
audible warning will sound to suggest  
that the driver take a break, when the  
driver's attention level is below 1.  
僅 When the driver resets Driver Atten  
-
tion Warning, the last break time is set  
to 00:00 and the driver's attention  
level is set to High.  
僅 Driver Attention Warning will not sug  
gest a break when the total driving  
time is shorter than 10 minutes or 10  
-
minutes has not passed after the last  
break was suggested.  
5
126  
Driving your vehicle  
Driver Attention Warning (DAW)  
Leading vehicle departure alert  
function  
Driver Attention Warning Mal  
function and Limitations  
-
-
Driver Attention Warning Mal  
function  
OMQ4040507L  
When the front vehicle departs from a  
stop, Leading Vehicle Departure Alert  
will inform the driver by displaying the  
OMQ4050118L  
When Driver Attention Warning is not  
working properly, the 'Check Driver  
Attention Warning (DAW) system' warn  
ing message will appear on the cluster. If  
this occurs, have the function inspected  
by an authorized Kia dealer.  
'Leading vehicle is driving away' mes  
-
sage on the cluster and an audible warn  
ing will sound.  
-
5
-
WARNING  
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
Limitations of Driver Attention  
Warning  
Driver Attention Warning may not work  
properly in the following situations:  
僅 The vehicle is driven violently  
僅 The vehicle intentionally crosses over  
lanes frequently  
is generated, Leading Vehicle Depar  
ture Alert warning message may not  
be displayed and audible warning  
may not be generated.  
-
僅 The driver should hold the responsi  
bility to safely drive and control the  
vehicle.  
-
僅 The vehicle is controlled by Driver  
Assistance system, such as Lane  
Keeping Assist  
CAUTION  
僅 Leading Vehicle Departure Alert is a  
supplemental function and may not  
alert the driver whenever the front  
vehicle departs from a stop.  
僅 Always check the front of the vehicle  
and road conditions before departure.  
Leading vehicle departure alert  
feature  
僅 When the vehicle cuts in  
僅 Depending on the instrument panel  
specifications or theme, images or  
colors may be displayed differently.  
5
127  
Driving your vehicle  
Driver Attention Warning (DAW)  
If the vehicle in front makes a sharp  
turn, such as to turn left or right or  
make a U- turn, etc., Leading Vehicle  
Departure Alert may not operate  
properly.  
僅 When the vehicle ahead abruptly  
departures  
OMQ4H052622  
OMQ4H052625  
If the vehicle in front abruptly depar  
-
tures, Leading Vehicle Departure Alert  
may not operate properly.  
僅 When a pedestrian or bicycle is  
between you and the vehicle ahead  
OMQ4H052623  
[A]: Your vehicle, [B]: Front vehicle  
If a vehicle cuts in front of your vehi  
-
cle, Leading Departure Alert may not  
operate properly.  
僅 When the vehicle ahead sharply  
steers  
ODL3059051  
If there is a pedestrian(s) or bicycle(s)  
in between you and the vehicle in  
front, Leading Vehicle Departure Alert  
may not operate properly.  
僅 When in a parking lot  
OMQ4H052624  
[A]: Your vehicle, [B]: Front vehicle  
5
128  
Driving your vehicle  
Blind-Spot View Monitor (BVM)  
Blind-Spot View Monitor  
(BVM) (if equipped)  
Left side  
OMQ4H052626  
If a vehicle parked in front drives  
away from you, Leading Vehicle  
Departure Alert may alert you that the  
parked vehicle is driving away.  
OMQ4AH050243  
Right side  
僅 The vehicle in front is difficult to be  
specified  
5
OMQ4H052627  
OMQ4AH050244  
If you pass a tollgate or intersection  
with lots of vehicles or you drive  
where lanes are merged or divided  
frequently, Leading Vehicle Departure  
Alert may not operate properly.  
Blind-Spot View Monitor displays the  
rear blind spot area of the vehicle in the  
cluster when the turn signal is turned on  
to help safely change lanes.  
WARNING  
CAUTION  
Vehicles may look closer than they actu  
ally are. Failure to visually confirm that it  
is safe to change lanes before doing so  
-
For more details on the precautions of  
the front view camera, refer to "Forward  
Collision-Avoidance Assist (FCA) (Front  
view camera only) (if equipped)" on  
page 5-62.  
may result in an accident leading to seri  
ous injury.  
-
* For detailed information, refer to the  
infotainment system manual.  
5
129  
Driving your vehicle  
Blind-Spot View Monitor (BVM)  
Detecting sensor  
Blind-Spot View Monitor Settings  
Blind-Spot View  
360° camera monitoring system-side  
view camera  
OMQ4051247R  
OMQ4AH050340  
(camera located at bottom of the mirror)  
Refer to the picture above for the  
僅 With the ENGINE START/STOP button  
in the ON position, select 'Driver Assis  
tance → Blind-Spot Safety → Blind  
Spot View' from the Settings menu to  
turn on Blind-Spot View Monitor and  
deselect to turn off the function.  
-
detailed location of the detecting sen  
-
sors.  
WARNING  
The image shown on the cluster may dif  
fer from the actual distance of the  
object. Make sure to directly check the  
vehicle's surroundings for safety.  
-
Blind-Spot View Monitor Opera  
tion  
-
Operating conditions  
僅 ENGINE START/STOP button is in the  
ON position  
CAUTION  
If the camera lens is covered with for  
eign material, Blind-Spot View Monitor  
may not operate normally. Always keep  
the camera lens clean.  
However, do not use chemical solvents  
such as strong detergents containing  
high alkaline or volatile organic solvents  
(gasoline, acetone etc.). This may dam  
age the camera lens.  
-
僅 Turn signal is ON  
Off conditions  
僅 ENGINE START/STOP button is in the  
OFF position  
僅 Turn signal is OFF  
僅 Hazard warning flasher is ON  
僅 Other warnings pops up and takes  
-
priority over the Blind-Spot View Mon  
itor  
-
5
130  
Driving your vehicle  
Cruise Control (CC)  
Blind-Spot View Monitor Mal  
function  
-
Cruise Control (CC) (if  
equipped)  
僅 When Blind-Spot View Monitor is not  
working properly, or the cluster dis  
play flickers, or the camera image  
-
does not display normally, have the  
function inspected by an authorized  
Kia dealer.  
OMQ4AH050127  
(1) Cruise indicator  
(2) Set speed  
Cruise Control will allow you to drive at  
speeds above 30 km/h (20 mph) without  
depressing the accelerator pedal.  
5
Cruise Control Operation  
Setting speed  
1. Accelerate to the desired speed,  
which must be more than 30 km/h  
(20 mph).  
OMQ4051128L  
2. Press the Driving Assist (  
)
button at the desired speed. The set  
speed and Cruise (  
) indica-  
tor will appear on the cluster.  
5
131  
Driving your vehicle  
Cruise Control (CC)  
3. Release the accelerator pedal.  
To decrease set speed  
Vehicle speed will maintain the set  
speed even when the accelerator  
pedal is not depressed.  
NOTICE  
On a steep slope, the vehicle may  
slightly slow down or speed up while  
driving uphill or downhill.  
To increase set speed  
OMQ4051325L  
僅 Push the - switch down and release it  
immediately. The set speed will  
decrease by 1 km/h (1 mph) each time  
the switch is operated in this manner.  
僅 Push the - switch down and hold it  
while monitoring the set speed on the  
cluster. The set speed will decrease to  
the nearest multiple of ten at first, and  
then decrease by 10 km/h (5 mph)  
each time the switch is operated in  
this manner.  
OMQ4051324L  
僅 Push the + switch up and release it  
immediately. The set speed will  
increase by 1 km/h (1 mph) each time  
the switch is operated in this manner.  
僅 Push the + switch up and hold it while  
monitoring the set speed on the clus  
Release the switch at the speed you  
want to maintain.  
To temporarily cancel Cruise  
Control  
-
ter. The set speed will increase to the  
nearest multiple of ten at first, and  
then increase by 10 km/h (5 mph)  
each time the switch is operated in  
this manner.  
Release the switch when the desired  
speed is shown and the vehicle will  
accelerate to that speed.  
OMQ4050326L  
Cruise Control will be canceled when:  
僅 Depressing the brake pedal.  
5
132  
Driving your vehicle  
Cruise Control (CC)  
僅 Pressing the (  
僅 Shifting the gear to N (Neutral).  
僅 Decreasing vehicle speed to less than  
approximately 30 km/h (20 mph).  
僅 ESC (Electronic Stability Control) is  
operating.  
) button.  
Press the Driving Assist (  
ton to turn Cruise Control off. The Cruise  
) indicator will go off.  
Always press the Driving Assist  
) but-  
(
(
) button to turn Cruise Control  
off when not in use.  
僅 Downshifting to 2nd gear when in  
Manual Shift mode.  
NOTICE  
Take the following precautions when  
using Cruise Control:  
The set speed will turn off but the Cruise  
(
) indicator will stay on.  
僅 Always set the vehicle speed under  
the speed limit in your country.  
To resume Cruise Control  
僅 Keep Cruise Control off when the  
function is not in use, to avoid inad  
-
vertently setting a speed. Check that  
the Cruise (  
off.  
) indicator is  
僅 Cruise Control does not substitute for  
proper and safe driving. It is the  
OMQ4050205L  
5
Operate the +, - switch or (  
) button.  
responsibility of the driver to always  
drive safely and should always be  
If you push the + switch up or - switch  
down, vehicle speed will be set to the  
current speed on the cluster.  
aware of unexpected and sudden sit  
uations from occurring.  
-
If you press the (  
speed will resume to the preset speed.  
Vehicle speed must be above 30 km/h  
(20 mph) for the function to resume.  
) button, vehicle  
僅 Always drive cautiously to prevent  
unexpected and sudden situations  
from occurring. Pay attention to the  
road conditions at all times.  
僅 Do not use Cruise Control when it may  
be unsafe to keep the vehicle at a  
constant speed:  
To turn off Cruise Control  
- When driving in heavy traffic, or  
when traffic conditions make it dif  
-
ficult to drive at a constant speed  
- When driving on rainy, icy, or snow-  
covered roads  
- When driving on hilly or windy  
roads  
- When driving in windy areas  
- When driving with limited view  
(possibly due to bad weather, such  
as fog, snow, rain and sandstorm)  
OMQ4051128L  
5
133  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 Do not use Cruise Control when tow  
-
Smart Cruise Control (SCC) (if  
equipped)  
Smart Cruise Control is designed to  
ing a trailer.  
detect the vehicle ahead and help main  
tain the desired speed and minimum  
distance with the vehicle ahead.  
-
Overtaking Acceleration Assist  
While Smart Cruise Control is operating,  
if the function judges that the driver is  
determined to overtake the vehicle in  
front, acceleration will be assisted.  
Detecting sensor  
Front view camera  
OMQ4051078  
Front radar  
OMQ4051077  
5
134  
Driving your vehicle  
Smart Cruise Control (SCC)  
The front view camera and front radar  
are used as a detecting sensor to detect  
front vehicles.  
Refer to the picture above for the  
detailed location of the detecting sensor.  
speed after accelerating to the set  
speed.  
NOTICE  
If your vehicle speed is between 0 ~ 30  
km/h (0 ~ 20 mph) when you press the  
CAUTION  
Driving Assist (  
) button, the  
Always keep the front view camera and  
front radar in good condition to maintain  
optimal performance of Smart Cruise  
Smart Cruise Control speed will be set to  
30 km/h (20 mph).  
Control. For more details on the precau  
-
To set vehicle distance  
tions of the front view camera and front  
radar, refer to "Forward Collision-Avoid  
ance Assist (FCA) (Sensor fusion) (if  
equipped)" on page 5-74.  
-
Smart Cruise Control Settings  
To turn on Smart Cruise Control  
5
OMQ4051265  
Each time the Vehicle Distance button is  
pressed, the vehicle distance changes as  
follows:  
OMQ4051128L  
NOTICE  
僅 Press the Driving Assist (  
)
button to turn on the function. The  
speed will be set to the current speed  
on the cluster.  
僅 If there is no vehicle in front of you,  
the set speed will be maintained, but if  
there is a vehicle in front of you, the  
speed may decrease to maintain the  
distance to the vehicle ahead. If the  
僅 If you drive at 90 km/h (56 mph), the  
distance is maintained as follows:  
Distance 4 - approximately 52.5 m  
(172 ft.)  
Distance 3 - approximately 40 m (130  
ft.)  
Distance 2 - approximately 32.5 m  
(106 ft.)  
vehicle ahead accelerates, your vehi  
cle will travel at a steady cruising  
-
Distance 1 - approximately 25 m (82  
ft.)  
5
135  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 The distance is set to the last set dis  
-
To decrease set speed  
tance when the engine is restarted, or  
when the function was temporarily  
canceled.  
To increase set speed  
OMQ4051130L  
僅 Push the - switch down and release it  
immediately. The set speed will  
decrease by 1 km/h (1 mph) each time  
the switch is operated in this manner.  
僅 Push the - switch down and hold it  
while monitoring the set speed on the  
cluster. The set speed will decrease by  
10 km/h (5 mph) each time the switch  
is operated in this manner.  
OMQ4051129L  
僅 Push the + switch up and release it  
immediately. The set speed will  
increase by 1 km/h (1 mph) each time  
the switch is operated in this manner.  
Release the switch at the speed you  
want to maintain. You can set the  
speed to 30 km/h (20 mph).  
僅 Push the + switch up and hold it while  
monitoring the set speed on the clus  
-
ter. The set speed will increase by 10  
km/h (5 mph) each time the switch is  
operated in this manner. Release the  
switch when the desired speed is  
shown, and the vehicle will accelerate  
to that speed. You can set the speed  
to 180 km/h (110 mph).  
To temporarily cancel Smart  
Cruise Control  
WARNING  
Check the driving condition before using  
the + switch. Driving speed may sharply  
increase when you push up and hold the  
+ switch.  
OMQ4050131L  
Press the (  
) button or depress the  
brake pedal to temporarily cancel Smart  
Cruise Control.  
5
136  
Driving your vehicle  
Smart Cruise Control (SCC)  
To resume Smart Cruise Control  
Driving Assist (  
off Smart Cruise Control. However Man  
ual Speed Limit Assist will turn on.  
) button to turn  
-
Based on Drive Mode  
Smart Cruise Control will change accel  
-
eration based on the drive mode  
selected from Drive Mode Integrated  
OMQ4050205  
To resume Smart Cruise Control after  
the function was canceled, operate the  
Control function. Refer to the following  
chart.  
+, - or (  
) switch.  
If you push the + switch up or - switch  
down, vehicle speed will be set to the  
current speed on the cluster.  
Drive Mode  
SMART  
SPORT  
ECO  
Smart Cruise Control  
Normal  
Fast  
Slow  
If you press the (  
) button, vehicle  
speed will resume to the preset speed.  
COMFORT  
Normal  
WARNING  
Check the driving condition before  
NOTICE  
5
pressing the (  
may sharply increase or decrease when  
you press the ( ) button.  
) button. Driving speed  
僅 For more details on Drive Mode, refer  
to "Drive mode integrated control sys  
tem" on page 5-57.  
-
僅 For the vehicle without the Drive  
Mode or Active Eco, acceleration of  
the Smart Cruise Control is set to 'Nor  
mal'.  
To turn off Smart Cruise Control  
-
Warning Methods  
OMQ4051128L  
Press the Driving Assist (  
) but-  
ton to turn Smart Cruise Control off.  
OMQ4A052388  
NOTICE  
If your vehicle is equipped with Manual  
Speed Limit Assist, press and hold the  
5
137  
Driving your vehicle  
Smart Cruise Control (SCC)  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
Vibration Warning, the Warning Vol  
-
ume will be activated with volume '2'  
or 'Medium'.  
OMQ4041606  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
With the vehicle on, touch ‘Settings →  
Vehicle → Driver Assistance → Warning  
Volume’ on the infotainment system to  
change the Warning Methods.  
Wheel Vibration Warning will be acti  
-
vated.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
-
tions.  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
-
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
-
-
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
Smart Cruise Control Operation  
Operating conditions  
Smart Cruise Control will operate when  
the following conditions are satisfied.  
→ Haptic warning' on the Infotain  
-
ment system.  
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
Basic function  
僅 The gear is in D (Drive)  
僅 The driver's door is closed  
driving, the audio volume will tempo  
-
rarily decrease to warn the driver with  
the audible warning.  
5
138  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 EPB (Electronic Parking Brake) is not  
applied  
temporarily. Pay attention to the road  
conditions at all times.  
僅 Your vehicle speed is within the oper  
-
僅 Regardless of your countries driving  
direction, Overtaking Acceleration  
ating speed range  
Assist will operate when the condi  
-
- 10 ~ 180 km/h (5 ~ 110 mph): when  
there is no vehicle in front  
- 0 ~ 180 km/h (0 ~ 110 mph): when  
there is a vehicle in front  
僅 ESC (Electronic Stability Control), TCS  
(Traction Control System) or ABS is  
on, but not controlling the vehicle  
tions are satisfied. When using the  
function in countries with different  
driving direction, always check the  
road conditions at all times.  
Smart Cruise Control Display and  
Control  
僅 Engine RPM is not in the red zone  
僅 Forward Collision-Avoidance Assist  
brake control is not operating  
Basic function  
You can see the status of the Smart  
Cruise Control operation in the Utility  
view on the cluster. Refer to "Instrument  
cluster" on page 4-69.  
Smart Cruise Control will be displayed as  
below depending on the status of the  
function.  
僅 ISG function is not operating  
NOTICE  
When stopped behind another vehicle,  
5
the driver can turn on Smart Cruise Con  
-
trol while the brake pedal is depressed.  
僅 When operating  
Overtaking Acceleration Assist  
Operating  
Overtaking Acceleration Assist will oper  
ate when the turn signal indicator is  
turned on to the left (left-hand drive) or  
turned on to the right (right-hand drive)  
while Smart Cruise Control is operating,  
-
and the following conditions are satis  
-
fied:  
僅 Your vehicle speed is above 60 km/h  
(40 mph)  
僅 The hazard warning flasher is off  
僅 A vehicle is detected in front of your  
vehicle  
OMQ4AH050234  
僅 Deceleration is not needed to main  
-
1. Whether there is a vehicle ahead  
and the selected distance level are  
displayed.  
tain distances with the vehicle in front  
WARNING  
僅 When the left turn signal indicator is  
turned on while there is a vehicle  
ahead, the vehicle may accelerate  
2. Set speed is displayed.  
5
139  
Driving your vehicle  
Smart Cruise Control (SCC)  
3. Whether there is a vehicle ahead  
and the selected target distance are  
displayed.  
To temporarily accelerate  
僅 When temporarily canceled  
Temporarily canceled  
OMQ4AH050132  
If you want to speed up temporarily  
when Smart Cruise Control is on,  
depress the accelerator pedal. While the  
OMQ4A050235  
speed is increasing, the set speed, dis  
-
tance level and target distance will blink  
on the cluster.  
1. (  
) indicator is displayed.  
2. The previous set speed is shaded.  
Vehicle ahead and distance level are  
not displayed.  
WARNING  
Be careful when accelerating temporar  
ily, because the speed and distance is  
not controlled automatically even if  
there is a vehicle in front of you.  
-
NOTICE  
僅 The distance of the front vehicle on  
the cluster is displayed according to  
the actual distance between your  
vehicle and the vehicle ahead.  
僅 The target distance may vary accord  
ing to the vehicle speed and the set  
Smart Cruise Control temporarily  
canceled  
-
distance level. If vehicle speed is low,  
even though the vehicle distance has  
changed, the change of the target  
vehicle distance may be small.  
OMQ4050134L  
Smart Cruise Control will be temporarily  
canceled automatically when:  
5
140  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 The vehicle speed is above 190 km/h  
(120 mph)  
僅 The accelerator pedal is continuously  
depressed for a certain period of time  
僅 The conditions for the Smart Cruise  
Control to operate is not satisfied  
If the function is temporarily canceled  
automatically, the 'Smart Cruise Control  
canceled' warning message will appear  
on the cluster, and an audible warning  
will sound to warn the driver.  
If the Driving Assist (  
switch, - switch or (  
ated when the function's operating con  
ditions are not satisfied, the 'Smart  
Cruise Control conditions not met' will  
appear on the cluster, and an audible  
warning will sound.  
) button, +  
) switch is oper  
-
-
In traffic situation  
If the Smart Cruise Control is temporarily  
canceled while the vehicle is at a stand  
still with the function operating, EPB  
(Electronic Parking Brake) maybe  
applied.  
-
WARNING  
When the function is temporarily can  
-
5
celed, distance with the front vehicle will  
not be maintained. Always have your  
eyes on the road while driving, and if  
necessary, depress the brake pedal to  
reduce your driving speed in order to  
maintain a safe distance.  
OMQ4050288L  
In traffic, your vehicle will stop if the  
vehicle ahead of you stops. Also, if the  
vehicle ahead of you starts moving, your  
vehicle will start as well.  
In addition, after the vehicle has stopped  
and a certain time have passed, the 'Use  
switch or pedal to accelerate' message  
will appear on the cluster. Depress the  
accelerator pedal or operate the +  
Smart Cruise Control conditions  
not satisfied  
switch, - switch or (  
driving.  
) switch to start  
WARNING  
While the message is displayed on the  
cluster, if there is no vehicle in front or  
the vehicle is far away from you, and the  
+ switch, – switch or (  
) switch is  
operated, Smart Cruise Control will auto  
matically cancel and the EPB will be  
applied. However, if the accelerator  
pedal is depressed, EPB will not be  
-
OMQ4040508L  
applied even though the function is can  
-
5
141  
Driving your vehicle  
Smart Cruise Control (SCC)  
celed. Always pay attention to the road  
condition ahead.  
Collision Warning  
Warning road conditions ahead  
OMQ4050071L  
While Smart Cruise Control is operating,  
when the collision risk with the vehicle  
ahead is high, the 'Collision Warning'  
warning message will appear on the  
cluster, and an audible warning will  
sound to warn the driver. Always have  
your eyes on the road while driving, and  
if necessary, depress the brake pedal to  
reduce your driving speed in order to  
maintain a safe distance.  
OMQ4A051142N  
In the following situation, the 'Watch for  
surrounding vehicles' warning message  
will appear on the cluster, and an audi  
ble warning will sound to warn the driver  
of road conditions ahead.  
僅 The vehicle in front disappears when  
Smart Cruise Control is maintaining  
the distance with the vehicle ahead  
while driving below a certain speed.  
-
NOTICE  
In the following situations, Smart Cruise  
Control may not warn the driver of a col  
lision.  
-
WARNING  
僅 The distance from the front vehicle is  
near, or the vehicle speed of the front  
vehicle is faster or similar with your  
vehicle  
僅 The speed of the front vehicle is very  
slow or is at a standstill  
Always pay attention to vehicles or  
objects that may suddenly appear in  
front of you, and if necessary, depress  
the brake pedal to reduce your driving  
speed in order to maintain a safe dis  
-
tance.  
僅 The accelerator pedal is depressed  
right after Smart Cruise Control is  
turned on  
WARNING  
Take the following precautions when  
using Smart Cruise Control:  
5
142  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 Smart Cruise Control does not substi  
tute for proper and safe driving. It is  
the responsibility of the driver to  
-
僅 Smart Cruise Control may not operate  
normally if interfered by strong elec  
-
tromagnetic waves.  
always check the speed and distance  
to the vehicle ahead.  
僅 Smart Cruise Control may not detect  
an obstacle in front and lead to a colli  
sion. Always look ahead cautiously to  
-
僅 Smart Cruise Control may not recog  
nize unexpected and sudden situa  
tions or complex driving situations, so  
-
-
prevent unexpected and sudden situ  
-
ations from occurring.  
always pay attention to driving condi  
-
僅 Vehicles moving in front of you with a  
frequent lane change may cause a  
delay in the function's reaction or may  
tions and control your vehicle speed.  
僅 Keep Smart Cruise Control off when  
the function is not in use to avoid  
inadvertently setting a speed.  
僅 Do not open the door or leave the  
vehicle when Smart Cruise Control is  
operating, even if the vehicle is  
stopped.  
僅 Always be aware of the selected  
speed and vehicle to vehicle distance.  
僅 Keep a safe distance according to  
road conditions and vehicle speed. If  
the vehicle to vehicle distance is too  
close during high-speed driving, a  
serious collision may result.  
cause the function to react to a vehi  
cle actually in an adjacent lane.  
Always drive cautiously to prevent  
unexpected and sudden situations  
from occurring.  
-
僅 Always be aware of the surroundings  
and drive safely, even though a warn  
ing message does not appear or an  
audible warning does not sound.  
-
5
僅 If any other function's warning mes  
-
sage is displayed or warning sound is  
generated, Smart Cruise Control  
warning message may not be dis  
-
played and warning sound may not  
be generated.  
僅 When maintaining distance with the  
vehicle ahead, if the front vehicle dis  
appears, the function may suddenly  
-
僅 You may not hear the warning sound  
of Smart Cruise Control if the sur  
-
accelerate to the set speed. Always be  
rounding is noisy.  
aware of unexpected and sudden sit  
-
uations from occurring.  
僅 The vehicle manufacturer is not  
responsible for any traffic violation or  
accidents caused by the driver.  
僅 Always set the vehicle speed under  
the speed limit in your country.  
僅 Vehicle speed may decrease on an  
upward slope and increase on a  
downward slope.  
僅 Always be aware of situations such as  
when a vehicle cuts in suddenly.  
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Smart Cruise Control is turned off due  
to safety reasons.  
僅 Turn off Smart Cruise Control when  
your vehicle is being towed.  
NOTICE  
僅 Smart Cruise Control may not operate  
for a few seconds after the vehicle is  
started or the front view camera or  
front radar is initialized.  
5
143  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 You may hear a sound when the  
brake is controlled by Smart Cruise  
Control.  
material, it can reduce the detecting per-  
formance and temporarily limit or dis  
-
able Smart Cruise Control.  
If this occurs, the 'Smart Cruise Control  
disabled. Radar blocked' warning mes  
sage will appear for a certain period of  
time on the cluster.  
The function will operate normally when  
snow, rain or foreign material is  
removed.  
-
Smart Cruise Control Malfunc  
-
tion and Limitations  
Smart Cruise Control malfunction  
WARNING  
Even though the warning message does  
not appear on the cluster, Smart Cruise  
Control may not properly operate.  
CAUTION  
Smart Cruise Control may not properly  
operate in an area (e.g. open terrain),  
where there is nothing to detect after  
turning ON the engine.  
OMQ4050145L  
When Smart Cruise Control is not work  
ing properly, the 'Check Smart Cruise  
Control system' warning message will  
-
Limitations of Smart Cruise Con  
-
appear, and the (  
) warning light will  
trol  
appear on the cluster. Have the function  
inspected by an authorized Kia dealer.  
Smart Cruise Control may not operate  
normally, or the function may operate  
unexpectedly under the following cir  
cumstances:  
-
Smart Cruise Control disabled  
僅 The detecting sensor or the surround  
ings are contaminated or damaged  
-
僅 Washer fluid is continuously sprayed,  
or the wiper is on  
僅 The camera lens are contaminated  
due to tinted, filmed or coated wind  
-
shield, damaged glass, or stuck of for  
-
eign material (sticker, bug, etc.) on the  
glass  
僅 Moisture is not removed or frozen on  
the windshield  
僅 The field of view of the front view  
camera is obstructed by sun glare  
OMQ4A051144N  
When the front radar cover or sensor is  
covered with snow, rain, or foreign  
5
144  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 Street light or light from an oncoming  
vehicle is reflected on the wet road  
surface, such as a puddle on the road  
僅 The bumper around the front radar is  
impacted, damaged or the front radar  
is out of position  
僅 The temperature around the front  
view camera is high or low  
僅 The temperature around the front  
radar is high or low  
僅 An object is placed on the dashboard  
僅 The surrounding is very bright  
僅 The surrounding is very dark, such as  
in a tunnel, etc.  
僅 The brightness changes suddenly, for  
example when entering or exiting a  
tunnel  
僅 The brightness outside is low, and the  
headlamps are not on or are not  
bright  
僅 Driving in large areas where there are  
few vehicles or structures (i.e. desert,  
meadow, suburb, etc.)  
僅 The vehicle in front is made of mate  
-
rial that does not reflect on the front  
radar  
僅 Driving near a highway (or motorway)  
interchange or tollgate  
僅 Driving on a slippery surface due to  
snow, water puddle, ice, etc.  
僅 Driving on a curved road  
僅 The vehicle in front is detected late  
僅 Driving in heavy rain, snow, or thick  
fog  
僅 Driving through steam, smoke or  
shadow  
僅 The vehicle in front is suddenly  
blocked by a obstacle  
5
僅 Only party of the vehicle or pedestrian  
is detected  
僅 The vehicle in front suddenly changes  
lanes or suddenly reduces speed  
僅 The vehicle in front has no taillamps,  
taillamps are located unusually, etc.  
僅 The vehicle in front is bent out of  
shape  
僅 The brightness outside is low, and the  
tail lamps are not on or are not bright  
僅 The front vehicle's speed is fast or  
slow  
僅 The rear of the front vehicle is small or  
does not look normal (i.e. tilted, over  
turned, etc.)  
僅 The front vehicle's ground clearance  
is low or high  
僅 With a vehicle in front, your vehicle  
changes lane at low speed  
僅 The vehicle in front is covered with  
snow  
-
僅 Unstably driving  
僅 A vehicle suddenly cuts in front  
僅 Your vehicle is being towed  
僅 You are on a roundabout and the  
vehicle in front is not detected  
僅 Driving through a tunnel or iron  
bridge  
僅 You are continuously driving in a cir  
-
cle  
僅 Driving near areas containing metal  
substances, such as a construction  
zone, railroad, etc.  
僅 A material is near that reflects very  
well on the front radar, such as a  
guardrail, nearby vehicle, etc.  
僅 Driving in a parking lot  
僅 Driving through a construction area,  
unpaved road, partial paved road,  
uneven road, speed bumps, etc.  
僅 Driving on an incline road, curved  
road, etc.  
5
145  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 Driving through a roadside with trees  
or streetlights  
僅 Your vehicle is moving unstable  
僅 The adverse road conditions cause  
excessive vehicle vibrations while  
driving  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
-
僅 Driving through a narrow road where  
trees or grass are overgrown  
ODEEV069240NR  
僅 There is interference by electromag  
-
Your vehicle speed can be reduced  
due to a vehicle in the adjacent lane.  
netic waves, such as driving in an area  
with strong radio waves or electrical  
noise  
Apply the accelerator pedal and select  
the appropriate set speed. Check to  
僅 Driving on a curved road  
be sure that the road conditions per  
-
mit safe operation of the Smart Cruise  
Control.  
僅 Driving on an inclined road  
OMQ4H052608  
On curves, Smart Cruise Control may  
not detect a vehicle in the same lane,  
and may accelerate to the set speed.  
Also, vehicle speed may rapidly  
decrease when the vehicle ahead is  
detected suddenly.  
Select the appropriate set speed on  
curves and apply the brake pedal or  
accelerator pedal according to the  
road and driving conditions ahead.  
OMQ4H052609  
During uphill or downhill driving, the  
Smart Cruise Control may not detect a  
moving vehicle in your lane, and  
cause your vehicle to accelerate to the  
set speed. Also, vehicle speed will rap  
idly decrease when the vehicle ahead  
is detected suddenly.  
-
Select the appropriate set speed on  
inclines and apply the brake pedal or  
accelerator pedal according to the  
road and driving conditions ahead.  
5
146  
Driving your vehicle  
Smart Cruise Control (SCC)  
僅 Changing lanes  
In the following cases, some vehicles  
in your lane cannot be detected by  
the sensor:  
- Vehicles offset to one side  
- Slow-moving vehicles or sudden-  
decelerating vehicles  
- Oncoming vehicles  
- Stopped vehicles  
- Vehicles with small rear profile,  
such as trailers  
- Narrow vehicles, such as motorcy  
cles or bicycles  
-
- Special vehicles  
- Animals and pedestrians  
OMQ4H052610  
Adjust your vehicle speed by depress  
ing the brake pedal according to the  
road and driving conditions ahead.  
-
[A]: Your vehicle  
[B]: Lane changing vehicle  
When a vehicle moves into your lane  
from an adjacent lane, it cannot be  
detected by the sensor until it is in the  
sensor's detection range. Smart  
5
Cruise Control may not immediately  
detect the vehicle when the vehicle  
changes lanes abruptly. In this case,  
you must maintain a safe braking dis  
tance, and if necessary, depress the  
brake pedal to reduce your driving  
-
speed in order to maintain a safe dis  
tance.  
-
OMQ4H050038  
僅 Detecting vehicle  
In the following cases, the vehicle in  
front cannot be detected by the sen  
-
sor:  
- Vehicles with higher ground clear  
-
ance or vehicles carrying loads that  
stick out of the back of the vehicle  
- Vehicles that has the front lifted  
due to heavy loads  
- You are steering your vehicle  
- Driving on narrow or sharply  
curved roads  
OMQ4H052628  
5
147  
Driving your vehicle  
Smart Cruise Control (SCC)  
Adjust your vehicle speed by depress  
ing the brake pedal according to the  
road and driving conditions ahead.  
-
OMQ4H052631  
僅 Always look out for pedestrians when  
your vehicle is maintaining a distance  
with the vehicle ahead.  
OMQ4H052629  
僅 When a vehicle ahead disappears at  
an intersection, your vehicle may  
accelerate.  
Always pay attention to road and driv  
ing conditions while driving.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
-
Operation is subject to the following  
conditions:  
1. This device may not cause interfer  
-
ence, and  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
OMQ4H052630  
僅 When a vehicle in front of you merges  
out of the lane, Smart Cruise Control  
may not immediately detect the new  
vehicle that is now in front of you.  
Always pay attention to road and driv  
ing conditions while driving.  
-
5
148  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
substitute for safe driving. It is the  
responsibility of the driver to always  
check the speed and distance to the  
vehicle ahead. Always drive safely and  
use caution.  
Navigation-based Smart  
Cruise Control (NSCC) (if  
equipped)  
Navigation-based Smart Cruise Control  
will help automatically adjust vehicle  
speed when driving on highways (or  
motorways) by using road information  
from the navigation function while Smart  
Cruise Control is operating.  
Highway Curve Zone Auto Slow  
-
down  
If vehicle speed is high, Highway Curve  
Zone Auto Slowdown function will tem  
NOTICE  
-
porarily decelerate your vehicle or limit  
acceleration to help you drive safely on a  
curve based on the curve information  
from the navigation.  
僅 Navigation-based Smart Cruise Con  
trol is available only on controlled  
access road of certain highways.  
* Controlled access road indicates roads  
with limited entrances and exits that  
allow uninterrupted high speed traffic  
flow. Only passenger cars and motor  
cycles are allowed on controlled  
access roads.  
-
Highway Set Speed Auto Change  
-
Highway Set Speed Auto Change func  
-
5
tion automatically changes Smart Cruise  
Control set speed based on the speed  
limit information from the navigation.  
Available highway (Controlled access  
road)  
Navigation-Based Smart Cruise  
Control Settings  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Driving Assist → Highway Auto Speed  
Change' from the Settings menu to turn  
Select Interstate High  
way and U.S. (Federal)  
and State Highways  
-
USA  
Select Provincial and  
Territorial Highways  
Canada  
on Navigation-based Smart Cruise Con  
trol and deselect to turn off the function.  
-
僅 Additional highways may be  
expanded by future navigation  
updates.  
NOTICE  
When there is a problem with Naviga  
-
tion-based Smart Cruise Control, the  
NOTICE  
function cannot be set from the Settings  
menu.  
Navigation-based Smart Cruise Control  
operates on main roads of highways (or  
motorways), and does not operate on  
interchanges or junctions.  
WARNING  
Navigation-based Smart Cruise Control  
is a supplemental function and is not a  
5
149  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
Navigation-Based Smart Cruise  
Control Operation  
Navigation-based Smart Cruise  
Control operating  
Operating conditions  
Navigation-based Smart Cruise Control  
is ready to operate if all of the following  
conditions are satisfied:  
僅 Smart Cruise Control is operating  
僅 Driving on main roads of highways (or  
motorways)  
NOTICE  
For more details on how to operate  
Smart Cruise Control, refer to "Smart  
Cruise Control (SCC) (if equipped)" on  
page 5-134.  
OMQ4A050248  
If temporary deceleration is required in  
the standby state and Navigation-based  
Smart Cruise Control is operating, the  
Function display and control  
When Navigation-based Smart Cruise  
Control operates, it will be displayed on  
the cluster as follows:  
green (  
cluster.  
) symbol will appear on the  
If the Highway Set Speed Auto Change  
function operates, the green (  
)
symbol and set speed will appear on the  
cluster, and an audible warning will  
sound.  
Navigation-based Smart Cruise  
Control standby  
WARNING  
'Drive carefully' warning message will  
appear in the following circumstances:  
OMQ4A050152  
If the operating conditions are satisfied,  
the white (  
) symbol will appear.  
OMQ4040504L  
5
150  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
僅 Navigation-based Smart Cruise Con  
trol is not able to slow down your  
vehicle to a safe speed  
-
state by driving on a road other than  
the highway (or motorway) main road,  
Highway Set Speed Auto Change  
function will operate again when you  
drive on the main road again without  
setting the set speed.  
僅 If Highway Set Speed Auto Change  
function has changed to the standby  
state by depressing the brake pedal,  
NOTICE  
Highway Curve Zone Auto Slowdown  
and Set Speed Auto Change function  
uses the same (  
) symbol.  
press the (  
function.  
僅 Highway Set Speed Auto Change  
function does not operate on highway  
interchanges or junctions.  
) switch to restart the  
Highway Curve Zone Auto Slow  
-
down  
僅 Depending on the curve ahead on the  
highway (or motorway), the vehicle  
will decelerate, and after passing the  
curve, the vehicle will accelerate to  
Smart Cruise Control set speed.  
NOTICE  
僅 Highway Set Speed Auto Change  
function only operates based on the  
speed limits of the highway (or motor  
way), it does not work with the speed  
cameras.  
僅 When Highway Set Speed Auto  
Change function is operating, the  
vehicle automatically accelerates or  
decelerates when the highway (or  
motorway) speed limit changes.  
僅 When Highway Set Speed Auto  
Change function is operating, the  
vehicle may warn the driver when the  
vehicle's set speed limit is above the  
speed camera limit.  
僅 The maximum set speed for Highway  
Set Speed Auto Change function is  
140 km/h (90 mph).  
僅 If the speed limit of a new road is not  
updated in the navigation, Highway  
Set Speed Auto Change function may  
not operate properly.  
僅 If the speed unit is set to a unit other  
than the speed unit used in your  
country, Highway Set Speed Auto  
-
僅 Vehicle deceleration time may differ  
depending on the vehicle speed and  
the degree of the curve on the road.  
5
The higher the driving speed, deceler  
-
ation will start faster.  
Highway Set Speed Auto Change  
僅 Highway Set Speed Auto Change  
function will operate when Smart  
Cruise Control set speed and the  
highway (or motorway) speed limit is  
matched.  
僅 While Highway Set Speed Auto  
Change function is operating, when  
the highway (or motorway), speed  
limit changes, Smart Cruise Control  
set speed automatically changes to  
the changed speed limit.  
僅 If Smart Cruise Control set speed is  
adjusted different from the speed  
limit, Highway Set Speed Auto  
Change function will be in the standby  
state.  
僅 If Highway Set Speed Auto Change  
function has changed to the standby  
5
151  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
Change function may not operate  
properly.  
general roads or nearby roads exist in  
a parallel way)  
僅 The navigation is being restarted  
while driving  
僅 There is bad weather, such as heavy  
rain, heavy snow, etc.  
僅 Driving on a road under construction  
僅 Driving on a road that is controlled  
Limitations of Navigation-Based  
Smart Cruise Control  
Navigation-based Smart Cruise Control  
may not operate normally under the fol  
lowing circumstances:  
-
僅 The navigation is not working prop  
-
僅 Driving on a road that is sharply  
curved  
erly  
僅 Speed limit and road information in  
the navigation is not updated  
僅 The map information and the actual  
僅 Driving on roads with intersections,  
roundabouts, straight entrances and  
exits, etc.  
road is different because of real-time  
GPS data or map information error  
僅 The navigation searches for a route  
while driving  
僅 GPS signals are blocked in areas such  
as a tunnel  
僅 The navigation is being updated while  
driving  
僅 Map information is not transmitted  
due to infotainment system's abnor  
mal operation  
-
ODL3A050307  
僅 A road that divides into two or more  
roads and joins again  
僅 The driver goes off course the route  
set in the navigation  
僅 The route to the destination is  
changed or canceled by resetting the  
navigation  
僅 The vehicle enters a service station or  
rest area  
[1]: Set route, [2]: Branch line, [3]: Driving  
route, [4]: Main road, [5]: Curved road  
section  
僅 When there is a difference between  
the navigation set route (branch line)  
and the driving route (main road),  
Highway Curve Zone Auto Slowdown  
function may not operate until the  
driving route is recognized as the  
main road.  
僅 The speed limit of some sections  
changes according to the road situa  
-
僅 When the vehicle's driving route is  
tions  
recognized as the main road by main  
taining the main road instead of the  
navigation set route, Highway Curve  
Zone Auto Slowdown function will  
-
僅 Android Auto or Car Play is operating  
僅 The navigation cannot detect the cur  
rent vehicle position (ex: elevated  
roads including overpass adjacent to  
-
operate. Depending on the distance to  
the curve and the current vehicle  
speed, vehicle deceleration may not  
5
152  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
be sufficient or may decelerate rap  
-
僅 If there is no destination set on the  
navigation, Highway Curve Zone Auto  
Slowdown function will operate based  
on the curve information on the main  
road.  
idly.  
僅 Even if you depart from the main  
road, Highway Curve Zone Auto Slow  
-
-
down function may temporarily oper  
ate due to navigation information of  
the highway curve section.  
WARNING  
僅 Navigation-based Smart Cruise Con  
-
trol is not a substitute for safe driving  
practices, but a convenience function.  
Always have your eyes on the road,  
and it is the responsibility of the driver  
to avoid violating traffic laws.  
ODL3A050305  
[1]: Main road, [2]: Branch line, [3]: Driv  
ing route, [4]: Set route, [5]: Curved road  
section  
僅 When there is a difference between  
the navigation route (main road) and  
the driving route (branch line), High  
way Curve Zone Auto Slowdown func  
tion will operate based on the curve  
information on the main road.  
僅 When it is judged that you are driving  
out of the route by entering the high  
way interchange or junction, Highway  
Curve Zone Auto Slowdown function  
will not operate.  
-
僅 The navigation's speed limit informa  
-
5
tion may differ from the actual speed  
limit information on the road. It is the  
driver's responsibility to check the  
speed limit on the actual driving road  
or lane.  
-
-
僅 Navigation-based Smart Cruise Con  
-
-
-
trol may not operate due to the exis  
tence of leading vehicles and the  
driving conditions of the vehicle.  
Always pay attention to road and driv  
ing conditions while driving.  
-
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Navigation-based Smart Cruise Con  
-
trol is turned off due to safety rea  
-
sons.  
僅 After you pass through a tollgate on a  
highway (or motorway), Navigation-  
based Smart Cruise Control will oper  
-
ate based on the first lane. If you enter  
one of the other lanes, the function  
might not operate properly.  
ODL3A050306  
[1]: Driving route, [2]: Branch line, [3]:  
Curved road section, [4]: Main road  
僅 The vehicle will accelerate if the driver  
depresses the accelerator pedal while  
Navigation-based Smart Cruise Con  
-
5
153  
Driving your vehicle  
Navigation-based Smart Cruise Control (NSCC)  
trol is operating, and the function will  
not decelerate the vehicle.  
1. This device may not cause interfer  
-
ence, and  
僅 If the driver accelerates and releases  
2. This device must accept any interfer-  
the accelerator pedal while Naviga  
-
ence, including interference that may  
cause undesired operation of the  
device.  
tion-based Smart Cruise Control is  
operating, the vehicle may not decel  
erate sufficiently or may rapidly  
decelerate to a safe speed.  
-
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
僅 If the curve is too large or too small,  
Navigation-based Smart Cruise Con  
-
trol may not operate.  
NOTICE  
僅 The speed information on the cluster  
and navigation may differ.  
僅 The time gap could occur between  
the navigation's guidance and when  
Navigation-based Smart Cruise Con  
-
trol operation starts and ends.  
僅 Even if you are driving at a speed  
lower than Smart Cruise Control set  
speed, acceleration may be limited by  
the curve sections ahead.  
僅 If Navigation-based Smart Cruise  
Control is operating while leaving the  
main road to enter an interchange,  
junction, rest area, etc., the function  
may operate for a certain period of  
time.  
僅 Deceleration by Navigation-based  
Smart Cruise Control may feel it is not  
sufficient due to road conditions such  
as uneven road surfaces, narrow  
lanes, etc.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
Operation is subject to the following  
conditions:  
5
154  
Driving your vehicle  
Lane Following Assist (LFA)  
Lane Following Assist Settings  
Lane Following Assist (LFA)  
Lane Following Assist is designed to help  
detect lane markings and/or vehicles on  
the road, and assists the driver's steering  
to help keep the vehicle between lanes.  
Turning Lane Following Assist  
On/Off  
Detecting sensor  
Front view camera  
OMQ4051135  
With the ENGINE START/STOP button in  
the ON position, shortly press the Lane  
Driving Assist button located on the  
steering wheel to turn on Lane Following  
5
OMQ4051078  
Assist. The white or green (  
light will appear on the cluster.  
Press the button again to turn off the  
function.  
) indicator  
The front view camera is used as a  
detecting sensor to detect lane markings  
and front vehicles.  
Refer to the picture above for the  
detailed location of the detecting sensor.  
Warning Methods  
NOTICE  
For more details on the precautions of  
the front view camera, refer to "Forward  
Collision-Avoidance Assist (FCA) (Sen  
-
sor fusion) (if equipped)" on page 5-74.  
OMQ4A052388  
5
155  
Driving your vehicle  
Lane Following Assist (LFA)  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
OMQ4041606  
Lane Following Assist Operation  
Warning and control  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Warning Volume will not turn off  
but the Hands off warning volume will  
sound as '1' or 'Low'.  
-
Lane Following Assist  
-
-
-
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
OMQ4AH050237  
driving, the audio volume will tempo  
-
If the vehicle ahead and/or both lane  
markings are detected and your vehicle  
speed is above 60 km/h (40 mph) and  
below 200 km/h (120 mph), the green  
rarily decrease to warn the driver with  
the audible warning.  
NOTICE  
(
) indicator light will appear on the  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
cluster, and the function will help the  
vehicle stay in lane by assisting the  
steering wheel.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
tions.  
-
5
156  
Driving your vehicle  
Lane Following Assist (LFA)  
hands-off warning, the 'Lane Following  
Assist (LFA) canceled' warning message  
will appear and Lane Following Assist  
will be automatically canceled.  
CAUTION  
When the steering wheel is not assisted,  
the green (  
) indicator light will blink  
and change to white.  
WARNING  
僅 If you attach objects to the steering  
wheel or certain amount of power is  
put to the steering wheel, the Lane  
Following Assist may not assist.  
Hands-off warning  
僅 Lane Following Assist does not oper  
-
ate at all times. It is the responsibility  
of the driver to safely steer the vehicle  
and to maintain the vehicle in its lane.  
僅 The hands–off warning message may  
appear late depending on road condi  
tions. Always have your hands on the  
steering wheel while driving.  
-
僅 If the steering wheel is held very  
5
lightly the hands–off warning mes  
-
OMQ4051155L  
sage may appear because the func  
-
If the driver takes their hands off the  
steering wheel for several seconds, the  
'Keep hands on the steering wheel'  
warning message will appear and an  
audible warning will sound in stages.  
tion may not recognize that the driver  
has their hands on the steering wheel.  
僅 If you attach objects to the steering  
wheel, the hands-off warning may not  
work properly.  
First stage: Warning message  
Second stage: Warning message (red  
steering wheel) and audible warning  
NOTICE  
僅 For more details on setting the func  
-
tions in the infotainment system, refer  
to the infotainment system manual.  
僅 When both lane markings are  
detected, the lane lines on the cluster  
will change from grey to white.  
OMQ4040509L  
If the driver still does not have their  
hands on the steering wheel after the  
5
157  
Driving your vehicle  
Lane Following Assist (LFA)  
Lane undetected  
Lane Following Assist Malfunc  
-
-
tion and Limitations  
Lane Following Assist malfunc  
tion  
OMQ4AH050332  
Lane detected  
OMQ4050157L  
When Lane Following Assist is not work  
-
ing properly, the 'Check Lane Following  
Assist (LFA) system' warning message  
will appear on the cluster. If this occurs,  
have the function inspected by an  
authorized Kia dealer.  
NOTICE  
For more details on the function precau  
tions, refer to "Lane Keeping Assist  
(LKA)" on page 5-88.  
-
OMQ4AH050333  
僅 If lane markings are not detected,  
steering wheel control by Lane Fol  
lowing Assist can be limited depend  
ing on whether a vehicle is in front or  
the driving conditions of the vehicle.  
僅 Even though the steering is assisted  
by Lane Following Assist, the driver  
should control the steering wheel.  
-
-
Limitations of Lane Following  
Assist  
For more details on function limitations,  
refer to "Lane Keeping Assist (LKA)" on  
page 5-88.  
僅 The steering wheel may feel heavier  
or lighter when the steering wheel is  
assisted by Lane Following Assist than  
when it is not.  
5
158  
Driving your vehicle  
Highway Driving Assist (HDA)  
僅 Additional highways may be  
expanded by future navigation  
updates.  
Highway Driving Assist (HDA)  
(if equipped)  
Detecting sensor  
Front view camera  
OMQ4050282L  
Highway Driving Assist is designed to  
help detect vehicles and lanes ahead,  
and help maintain distance from the  
vehicle ahead, maintain the set speed,  
and keep the vehicle between lanes  
while driving on the highway (or motor  
way).  
OMQ4051078  
5
Front radar  
-
NOTICE  
僅 Highway Driving Assist is available  
only on controlled access road of cer  
-
tain highways.  
* Controlled access road indicates roads  
with limited entrances and exits that  
allow uninterrupted high speed traffic  
flow. Only passenger cars and motor  
cycles are allowed on controlled  
access roads.  
-
OMQ4051077  
Refer to the picture above for the  
detailed location of the detecting sen  
sors.  
Available highway (Controlled access  
road)  
-
Select Interstate High  
way and U.S. (Federal)  
and State Highways  
Select Provincial and  
Territorial Highways  
-
NOTICE  
USA  
For more details on the precautions of  
the detecting sensors, refer to "Forward  
Collision-Avoidance Assist (FCA) (Sen  
sor fusion) (if equipped)" on page 5-74.  
-
Canada  
5
159  
Driving your vehicle  
Highway Driving Assist (HDA)  
Highway Driving Assist Settings  
Warning Methods  
OMQ4A050355  
OMQ4A052388  
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Driving Assist' from  
the Settings menu to set whether or not  
to use each function.  
僅 If 'Highway Driving Assist' is selected,  
it helps maintain distance from the  
vehicle ahead, maintain the set speed,  
and keep the vehicle between lanes.  
NOTICE  
僅 If there is a problem with the func  
OMQ4041606  
-
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
tions, the settings cannot be changed.  
Have the function inspected by an  
authorized Kia dealer.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
tion's Warning Volume will not turn off  
but the Hands off warning volume will  
sound as '1' or 'Low'.  
-
僅 If the engine is restarted, the func  
-
tions will maintain the last setting.  
-
WARNING  
For your safety, change the Settings  
after parking the vehicle at a safe loca  
tion.  
-
-
-
僅 Driving Safety Priority : Select ‘Vehicle  
Settings → Driver Assistance → Warn  
ing Methods → Driving Safety Priority’  
on the Infotainment system. For safe  
-
driving, the audio volume will tempo  
-
5
160  
Driving your vehicle  
Highway Driving Assist (HDA)  
rarily decrease to warn the driver with  
the audible warning.  
Operating State  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
OMQ4A050236  
tions.  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
Standby State  
5
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
OMQ4A050237  
Highway Driving Assist Opera  
-
tion  
1. Highway Driving Assist indicator,  
whether there is a vehicle ahead and  
the selected distance level are dis  
Display and control  
-
You can see the status of the Highway  
Driving Assist operation in the Driving  
Assist view on the cluster. Refer to "LCD  
display" on page 4-77.  
played.  
僅 Highway Driving Assist indicator  
- Green (  
- White (  
): Operating state  
): Standby state  
2. Set speed is displayed.  
Highway Driving Assist will be displayed  
as below depending on the status of the  
function.  
3. Lane Following Assist indicator dis  
-
played.  
4. Whether there is a vehicle ahead and  
the target vehicle to vehicle distance  
is displayed.  
5. Whether the lane is detected or not is  
displayed.  
5
161  
Driving your vehicle  
Highway Driving Assist (HDA)  
6. Depending on the instrument panel  
specifications or theme, images or  
colors may be displayed differently.  
Restarting after stopping  
* For more details on Lane Following  
Assist (LFA), refer to "Lane Following  
Assist (LFA)" on page 5-155.  
* For more details on Smart Cruise Con  
-
-
trol (SCC), refer to "Smart Cruise Con  
trol (SCC) (if equipped)" on page 5-  
134.  
Highway Driving Assist operating  
Highway Driving Assist will operate  
when entering or driving on the main  
road of highways (or motorways), and  
satisfying all the following conditions:  
僅 Lane Following Assist is operating  
僅 Smart Cruise Control is operating  
OMQ4050288L  
When Highway Driving Assist is operat  
ing, your vehicle will stop if the vehicle  
ahead of you stops. Also, if the vehicle  
-
ahead of you starts moving approxi  
-
mately within 30 seconds after the stop,  
your vehicle will start as well. In addition,  
after the vehicle has stopped and  
NOTICE  
僅 While driving on the highway (or  
motorway), if Smart Cruise Control  
starts operating, Highway Driving  
Assist will operate.  
僅 When entering the main roads of  
highways (or motorways), Highway  
Driving Assist will not turn on if the  
Lane Following Assist is turned off  
even when Smart Cruise Control is  
operating.  
approximately 30 seconds have passed,  
the 'Use switch or pedal to accelerate'  
message will appear on the cluster.  
Depress the accelerator pedal or push  
the + switch, - switch or (  
start driving.  
) switch to  
Hands-off warning  
OMQ4051155L  
If the driver takes their hands off the  
steering wheel for several seconds, the  
'Keep hands on steering wheel' warning  
5
162  
Driving your vehicle  
Highway Driving Assist (HDA)  
message will appear and an audible  
warning will sound in stages.  
僅 First stage: Warning message  
僅 Second stage: Warning message (red  
steering wheel) and audible warning  
Highway Driving Assist Malfunc  
-
-
tion and Limitations  
Highway Driving Assist malfunc  
tion  
OMQ4050220L  
OMQ4050219L  
When Highway Driving Assist is not  
working properly, the 'Check Highway  
Driving Assist (HDA) system' warning  
If the driver still does not have their  
hands on the steering wheel after the  
5
hands-off warning, the 'Highway Driv  
-
message will appear, and the (  
)
ing Assist (HDA) canceled' warning mes  
sage will appear.  
-
warning light will appear on the cluster.  
Have the function inspected by an  
authorized Kia dealer.  
Highway Driving Assist standby  
When the Smart Cruise Control is tem  
-
porarily canceled while Highway Driving  
Assist is operating, Highway Driving  
Assist will be in the standby state. At this  
time, Lane Following Assist will operate  
normally.  
WARNING  
僅 The driver is responsible for con  
trolling the vehicle for safe driving.  
僅 Always have your hands on the steer  
ing wheel while driving.  
-
-
僅 Highway Driving Assist is a supple  
-
mental function that assists the driver  
in driving the vehicle and is not a  
complete autonomous driving system.  
Always check road conditions, and if  
necessary, take appropriate actions to  
drive safely.  
僅 Always have your eyes on the road,  
and it is the responsibility of the driver  
to avoid violating traffic laws. The  
vehicle manufacturer is not responsi  
ble for any traffic violation or acci  
dents caused by the driver.  
-
-
5
163  
Driving your vehicle  
Highway Driving Assist (HDA)  
僅 Highway Driving Assist may not be  
able to recognize all traffic situations.  
The function may not detect possible  
collisions due to Limitations. Always  
be aware of the Limitations. Obstacles  
conditions. Always have your hands  
on the steering wheel while driving.  
僅 For your safety, please read the  
owner's manual before using the  
Highway Driving Assist.  
僅 Highway Driving Assist will not oper  
ate when the engine is started, or  
when the detecting sensors or naviga  
tion is being initialized.  
such as vehicles, motorcycles, bicy  
-
-
cles, pedestrians, guardrails, toll gate,  
unspecified objects, structures, etc.  
that may collide with the vehicle may  
not be detected.  
-
僅 Highway Driving Assist will turn off  
Limitations of Highway Driving  
Assist  
Highway Driving Assist and Highway  
Lane Change function may not operate  
normally, or may not operate under the  
following circumstances:  
automatically under the following sit  
-
uations:  
- Driving on roads that the function  
does not operate, such as a rest  
area, intersection, junction, etc.  
- The navigation does not operate  
僅 The map information and the actual  
properly such as when the naviga  
-
road is different because the naviga  
-
tion is being updated or restarted  
tion is not updated  
僅 Highway Driving Assist may inadver  
-
僅 The map information and the actual  
road is different because of real-time  
GPS data or map information error  
tently operate or turn off depending  
on road conditions (navigation infor  
-
mation) and surroundings.  
僅 The infotainment system is over  
-
僅 Lane Following Assist function may be  
temporarily disabled when the front  
view camera cannot detect lanes  
properly or the hands-off warning is  
on.  
loaded by simultaneously performing  
functions such as route search, video  
playback, voice recognition, etc.  
僅 GPS signals are blocked in areas such  
as a tunnel  
僅 The driver goes off course or the  
route to the destination is changed or  
canceled by resetting the navigation  
(including TPEG change)  
僅 The vehicle enters a service station or  
rest area  
僅 Android Auto or Car Play is operating  
僅 The navigation cannot detect the cur  
rent vehicle position (ex: elevated  
roads including overpass adjacent to  
general roads or nearby roads exist in  
a parallel way)  
僅 You may not hear the warning sound  
of Highway Driving Assist if the sur  
-
rounding is noisy.  
僅 If the vehicle is driven at high speed  
above a certain speed at a curve, your  
vehicle may drive to one side or may  
depart from the driving lane.  
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Highway Driving Assist is turned off  
due to safety reasons.  
-
僅 The hands–off warning message may  
appear early or late depending on  
how the steering wheel is held or road  
5
164  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
Rear Cross-Traffic Collision-  
Avoidance Assist (RCCA) (if  
equipped)  
Rear Cross-Traffic Collision-Avoidance  
Assist is designed to help detect vehicles  
approaching from the left and right side  
while your vehicle is reversing, and warn  
the driver that a collision is imminent  
with a warning message and an audible  
warning. Also, braking is assisted to help  
prevent collision.  
NOTICE  
For more details on the limitations of the  
front view camera and front radar, refer  
to "Forward Collision-Avoidance Assist  
(FCA) (Sensor fusion) (if equipped)" on  
page 5-74.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
Operation is subject to the following  
conditions:  
1. This device may not cause interfer  
-
ence, and  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
5
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
OMQ4050263  
[A]: Rear Cross-Traffic Collision Warning  
operating range  
[B]: Rear Cross-Traffic Collision-Avoid  
ance Assist operating range  
-
CAUTION  
The time of warning may vary depend  
-
ing on vehicle speed of the approaching  
vehicle.  
NOTICE  
In the following text, Rear Cross-Traffic  
Collision Assist will be referred as Rear  
Cross-Traffic Collision-Avoidance Assist.  
5
165  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
Safety' from the Settings menu to turn  
Detecting sensor  
on Rear Cross-Traffic Collision-Avoid  
-
Rear corner radar  
ance Assist and deselect to turn off the  
function.  
WARNING  
When the engine is restarted, Rear  
Cross-Traffic Collision-Avoidance Assist  
will always turn on. However, if 'Off' is  
selected after the engine is restarted, the  
driver should always be aware of the  
surroundings and drive safely.  
NOTICE  
OMQ4A042598  
Settings for Rear Cross-Traffic Collision-  
Avoidance Assist include Rear Cross-  
Traffic Collision Warning and Rear  
Refer to the picture above for the  
detailed location of the detecting sensor.  
Cross-Traffic Collision-Avoidance Assist.  
NOTICE  
For more details on the precautions of  
the rear corner radar, refer to "Blind-  
Spot Collision-Avoidance Assist (BCA) (if  
equipped)" on page 5-95.  
Warning Timing  
Rear Cross-Traffic Collision-  
Avoidance Assist Settings  
Rear Cross-Traffic Safety  
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
-
-
vation time for Rear Cross-Traffic Colli  
sion-Avoidance Assist.  
When the vehicle is first delivered, Warn  
-
OMQ4AH050341  
ing Timing is set to 'Normal'. If you  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Parking Safety → Rear Cross-Traffic  
change the Warning Timing, the warning  
time of other Driver Assistance systems  
may change.  
5
166  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
→ Haptic warning' on the Infotain  
ment system.  
-
Warning Methods  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
Vibration Warning, the Warning Vol  
-
ume will be activated with volume '2'  
or 'Medium'.  
OMQ4A052388  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
-
vated.  
5
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
tions.  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
OMQ4041606  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
-
-
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
-
-
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
Rear Cross-Traffic Collision-  
Avoidance Assist Operation  
Warning and control  
僅 Steering Wheel Vibration Warning:  
Select 'User Settings → Driver Assis  
Rear Cross-Traffic Collision-Avoidance  
Assist will warn and control the vehicle  
depending on collision level: 'Collision  
Warning', 'Emergency Braking' and  
-
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
5
167  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
'Stopping vehicle and ending brake con  
-
side view mirror will blink and a warn  
ing will appear on the cluster. At the  
same time, an audible warning will  
sound and the steering wheel will  
vibrate. If the Rear View Monitor is  
operating, a warning will also appear  
on the infotainment system screen.  
-
trol'.  
Collision Warning  
僅 The function will operate when all the  
following conditions are satisfied:  
- The gear is changed to R (Reverse)  
- Vehicle speed is below 8 km/h (5  
mph)  
- The approaching vehicle is within  
approximately 25 m (82 ft.) from  
the left and right side of your vehi  
-
cle  
OMQ4A051098  
OMQ4050309L  
OMQ4AH050162  
- The speed of the vehicle approach  
ing from the left and right is above  
5 km/h (3 mph)  
-
NOTICE  
If the operating conditions are satisfied,  
there will be a warning whenever the  
vehicle approaches from the left or right  
side even though your vehicle speed is 0  
km/h (0 mph).  
Emergency Braking  
僅 To warn the driver of an approaching  
vehicle from the rear left/right side of  
your vehicle, the warning light on the  
OMQ4050098L  
5
168  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
- The speed of the vehicle approach  
-
ing from the left and right is above  
5 km/h (3 mph)  
僅 Emergency braking will be assisted to  
help prevent collision with approach  
-
ing vehicles from the left and right.  
NOTICE  
Brake control will end when:  
僅 The approaching vehicle is out of the  
detecting range  
僅 The approaching vehicle passes  
behind your vehicle  
OMQ4A051385N  
僅 The approaching vehicle does not  
drive toward your vehicle  
僅 The approaching vehicle speed slows  
down  
僅 The driver depresses the brake pedal  
with sufficient power  
5
Stopping vehicle and ending  
brake control  
OMQ4AH050162  
僅 To warn the driver of an approaching  
vehicle from the rear left/right side of  
your vehicle, the warning light on the  
side view mirror will blink and a warn  
-
ing message will appear on the clus  
ter. At the same time, an audible  
warning will sound and the steering  
wheel will vibrate. If the Rear View  
Monitor is operating, a warning will  
-
also appear on the infotainment sys  
-
tem screen.  
僅 The function will operate when all the  
following conditions are satisfied:  
- The gear is changed to R (Reverse)  
OMQ4040504L  
僅 When the vehicle is stopped due to  
emergency braking, the 'Drive care  
-
fully' warning message will appear on  
the cluster.  
- Vehicle speed is below 8 km/h (5  
mph)  
僅 For your safety, the driver should  
depress the brake pedal immediately  
and check the surroundings.  
- The approaching vehicle is within  
approximately 1.5 m (5 ft.) from the  
left and right side of your vehicle  
5
169  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
僅 Brake control will end after the vehicle  
is stopped by emergency braking for  
approximately 2 seconds.  
僅 Rear Cross-Traffic Collision-Avoid-  
ance Assist does not operate in all sit  
-
uations or cannot avoid all collisions.  
僅 During emergency braking, braking  
僅 During emergency braking, braking  
control by the function will automati  
-
control by the function will automati-  
cally cancel when the driver exces  
-
cally cancel when the driver exces  
sively depresses the accelerator  
pedal.  
-
sively depresses the brake pedal.  
WARNING  
僅 The driver should hold the responsi  
-
Take the following precautions when  
bility to control the vehicle. Do not  
using Rear Cross-Traffic Collision-Avoid  
-
solely depend on Rear Cross-Traffic  
Collision-Avoidance Assist. Rather,  
ance Assist:  
僅 For your safety, change the Settings  
after parking the vehicle at a safe  
location.  
maintain a safe braking distance, and  
if necessary, depress the brake pedal  
to reduce driving speed or to stop the  
vehicle.  
僅 If any other function's warning mes  
-
sage is displayed or audible warning  
is generated, Rear Cross-Traffic  
Safety function's warning message  
may not be displayed and audible  
warning may not be generated.  
僅 Never deliberately operate Rear  
Cross-Traffic Collision-Avoidance  
Assist on people, animal, objects, etc.  
It may cause serious injury or death.  
僅 You may not hear the warning sound  
of Rear Cross-Traffic Collision-Avoid  
ance Assist if the surrounding is noisy.  
僅 Rear Cross-Traffic Collision-Avoid  
ance Assist may not operate if the  
driver applies the brake pedal to avoid  
collision.  
僅 During Rear Cross-Traffic Safety  
Function Operation, the vehicle may  
stop suddenly injuring passengers  
and shifting loose objects. Always  
have the seat belt on and keep loose  
objects secured.  
CAUTION  
The brake control may not operate  
properly depending on the status of ESC  
(Electronic Stability Control).  
There will only be a warning when:  
僅 The ESC (Electronic Stability Control)  
warning light is on  
-
-
僅 ESC (Electronic Stability Control) is  
engaged in a different function  
NOTICE  
僅 If the function assists you with brak  
ing, the driver must immediately  
depress the brake pedal and check  
vehicle surroundings.  
-
僅 Even if there is a problem with Rear  
Cross-Traffic Collision-Avoidance  
Assist, the vehicle's basic braking per  
formance will operate normally.  
-
僅 Brake control will end when the driver  
僅 Rear Cross-Traffic Collision-Avoid  
-
depresses the brake pedal with suffi  
-
ance Assist may warn the driver late  
cient power.  
or may not warn the driver depending  
on the road and driving conditions.  
僅 After changing the gear to R  
(Reverse), braking control will operate  
5
170  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
once for left and right vehicle  
approach.  
view mirror warning light' warning mes-  
sage will appear on the cluster. Have the  
function inspected by an authorized Kia  
dealer.  
Rear Cross-Traffic Collision-  
Avoidance Assist Malfunction  
and Limitations  
Rear Cross-Traffic Collision-  
Avoidance Assist disabled  
Rear Cross-Traffic Collision-  
Avoidance Assist malfunction  
OMQ4050292L  
5
When the rear bumper around the rear  
corner radar or rear sensor is covered  
with foreign material, such as snow or  
rain, or installing a trailer or carrier, it can  
reduce the detecting performance and  
temporarily limit or disable Rear Cross-  
Traffic Collision-Avoidance Assist.  
If this occurs, the 'Rear Cross-Traffic  
Safety Function disabled. Radar blocked'  
warning message will appear on the  
cluster.  
OMQ4050290L  
When Rear Cross-Traffic Collision-  
Avoidance Assist is not working prop  
erly, the 'Check Rear Cross-Traffic  
Safety system' warning message will  
-
appear on the cluster, and the function  
will turn off automatically or the function  
will be limited. Have the function  
inspected by an authorized Kia dealer.  
The function will operate normally when  
such foreign material or trailer, etc. is  
removed.  
If the function does not operate normally  
after it is removed, have the function  
inspected by an authorized Kia dealer.  
NOTICE  
僅 Even though the warning message  
does not appear on the cluster, Rear  
Cross-Traffic Collision-Avoidance  
Assist may not operate properly.  
OMQ4050291L  
When the side view mirror warning light  
is not working properly, the 'Check side  
5
171  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
僅 Rear Cross-Traffic Collision-Avoid  
-
WARNING  
僅 Driving near a vehicle or structure  
ance Assist may not operate properly  
in an area (for example: open terrain),  
where any substance are not detected  
after turning ON the engine.  
CAUTION  
Turn off Rear Cross-Traffic Collision-  
Avoidance Assist to install a trailer, car  
-
rier, etc., or remove the trailer, carrier,  
etc. to use Rear Cross-Traffic Collision-  
Avoidance Assist.  
OMQ4H052636  
Limitations of Rear Cross-Traffic  
Collision-Avoidance Assist  
[A]: Structure  
Rear Cross-Traffic Collision-Avoidance  
Assist may not operate normally, or the  
function may operate unexpectedly  
under the following circumstances:  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist may be limited when driv  
-
ing near a vehicle or structure, and  
may not detect the vehicle approach  
-
ing from the left or right. If this occurs,  
the function may not warn the driver  
or control the brakes when necessary.  
Always check your surroundings while  
backing up.  
僅 Departing from where trees or grass  
are overgrown  
僅 Departing from where roads are wet  
僅 Speed of the approaching vehicle is  
fast or slow  
僅 When the vehicle is in a complex  
parking environment  
Braking control may not work, driver's  
attention is required in the following cir  
-
cumstances:  
僅 The vehicle severely vibrates while  
driving over a bumpy road, uneven  
road or concrete patch  
僅 Driving on a slippery surface due to  
snow, water puddle, ice, etc.  
僅 The tire pressure is low or a tire is  
damaged  
僅 The brake is reworked  
NOTICE  
OMQ4H052637  
For more details on the limitations of the  
rear corner radar, refer to "Blind-Spot  
Collision-Avoidance Assist (BCA) (if  
equipped)" on page 5-95.  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist may detect vehicles which  
are parking or pulling out near your  
vehicle (for example: a vehicle leaving  
5
172  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
beside your vehicle, a vehicle parking  
僅 When the vehicle is on or near a slope  
or pulling out in the rear area, a vehi  
-
cle approaching your vehicle making  
a turn, etc.). If this occurs, the function  
may unnecessarily warn the driver  
and control the brake.  
Always check your surroundings while  
backing up.  
僅 When the vehicle is parked diagonally  
OMQ4H052033  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist may be limited when the  
vehicle is on a uphill or downhill slope,  
or near it, and may not detect the  
vehicle approaching from the left or  
right. If this occurs, the function may  
not warn the driver or control the  
brakes when necessary.  
5
OMQ4H052638  
Always check your surroundings while  
backing up.  
[A]: Vehicle  
Rear Cross-Traffic Collision-Avoid  
ance Assist may be limited when  
backing up diagonally, and may not  
detect the vehicle approaching from  
the left or right. If this occurs, the  
function may not warn the driver or  
control the brakes when necessary.  
-
WARNING  
僅 Pulling into the parking space where  
there is a structure  
Always check your surroundings while  
backing up.  
OMQ4H052639  
[A]: Structure, [B]: Wall  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist may detect vehicles pass  
-
5
173  
Driving your vehicle  
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)  
ing by in front of you when parking  
backwards into a parking space with a  
wall or structure in the rear or side  
area. If this occurs, the function may  
unnecessarily warn the driver and  
control the brake.  
僅 Rear Cross-Traffic Collision-Avoid-  
ance Assist may not operate for  
approximately 3 seconds after the  
vehicle is started, or the rear corner  
radars are initialized.  
Always check your surroundings while  
backing up.  
僅 When the vehicle is parked rearward  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
Operation is subject to the following  
conditions:  
1. This device may not cause interfer  
-
ence, and  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
OMQ4H052640  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist may detect vehicles pass  
-
ing by behind you when parking  
backwards into a parking space. If this  
occurs, the function may unnecessar  
-
ily warn the driver and control the  
brake.  
Always check your surroundings while  
backing up.  
WARNING  
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Rear Cross-Traffic Collision-Avoid  
-
ance Assist is turned off due to safety  
reasons.  
僅 Rear Cross-Traffic Collision-Avoid  
-
ance Assist may not operate normally  
if interfered by strong electromag  
netic waves.  
-
5
174  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
Reverse Parking Collision-  
Avoidance Assist (PCA) (if  
equipped)  
CAUTION  
Take the following precautions to main  
-
-
tain optimal performance of the detect  
ing sensors:  
Reverse Parking Collision-Avoidance  
Assist may warn the driver or may assist  
僅 Always keep the rear view camera  
and rear ultrasonic sensors clean.  
僅 Do not use any cleanser containing  
acid or alkaline detergents when  
cleaning the rear view camera lens.  
Use only a mild soap or neutral deter  
gent, and rinse thoroughly with water.  
僅 Never disassemble or apply impact on  
the rear view camera or the rear ultra  
sonic sensors components.  
with braking to help reduce the possibil  
ity of collision with a pedestrian or an  
object when backing up.  
-
-
Detecting sensor  
Wide-rear view camera  
-
僅 Do not apply unnecessary force on  
the rear view camera or the rear ultra  
-
sonic sensors. Reverse Parking Colli  
-
sion-Avoidance Assist may not  
5
operate properly if the rear view cam  
-
era or the rear ultrasonic sensor(s) is  
forcibly moved out of proper align  
-
ment. Have the vehicle inspected by  
an authorized Kia dealer.  
OMQ4A042594  
僅 Do not spray the rear view camera or  
the rear ultrasonic sensors or their  
surrounding area directly with a high  
pressure washer. It may cause the  
Rear ultrasonic sensors  
rear view camera or the rear ultra  
-
sonic sensors to malfunction.  
僅 Reverse Parking Collision-Avoidance  
Assist may not work properly if the  
bumper has been damaged, replaced  
or repaired.  
僅 Do not apply objects, such as  
abumper sticker or a bumper guard,  
near the rear view camera or rear  
ultrasonic sensors or apply paint to  
the bumper. Doing so may adversely  
affect the performance of Reverse  
Parking Collision-Avoidance Assist.  
OMQ4A042045  
Refer to the picture above for the  
detailed location of the detecting sen  
-
sors.  
僅 Reverse Parking Collision-Avoidance  
Assist may not operate normally if  
5
175  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
interfered by strong electromagnetic  
waves.  
Warning Timing  
Reverse Parking Distance Warn  
ing Settings  
-
Parking Safety  
OMQ4AH050334  
With the ENGINE START/STOP button in  
the ON position, select 'Driver Assistance  
→ Warning Timing' from the Settings  
menu to change the initial warning acti  
-
vation time for Forward Collision-Avoid  
-
ance Assist.  
OMQ4AH050348  
When the vehicle is first delivered, Warn  
-
With the ENGINE START/STOP button in  
the ON position, select or deselect  
'Driver Assistance → Parking Safety'  
from the Settings menu to set whether  
or not to use each function.  
ing Timing is set to 'Normal'.  
If you change the Warning Timing, the  
warning time of other Driver Assistance  
systems may change.  
Warning Methods  
僅 If 'Rear Active Assist' is selected, the  
function will warn the driver and assist  
with braking when a collision with a  
pedestrian or an object is imminent.  
僅 If 'Rear Warning Only' is selected, the  
function will warn the driver when a  
collision with a pedestrian or an object  
is imminent. Braking will not be  
assisted.  
僅 If 'Off' is selected, the function will  
turn off.  
OMQ4A052388  
5
176  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
ume will be activated with volume '2'  
or 'Medium'.  
僅 With the Steering Wheel Vibration  
Warning off, if you adjust the Warning  
Volume to '0' or 'Off', the Steering  
Wheel Vibration Warning will be acti  
-
vated.  
僅 The setting menu may not be avail  
-
able for your vehicle depending on  
the vehicle features and specifica  
-
tions.  
OMQ4041606  
僅 Descriptions of each driver assistance  
system may be slightly different from  
the owner's manual after updating the  
software of your infotainment system.  
In this case, scan the QR code in the  
infotainment system manual to  
access the web manual for checking  
the changes.  
You can adjust the Warning Methods  
with the ignition switch or ENGINE  
START/ STOP button in the ON position.  
僅 Warning Volume : Select 'User Set  
tings → Driver Assistance → Warning  
Volume' on the LCD display or 'Set  
tings → Vehicle → Driver Assistance  
→ Warning Methods → Warning vol  
ume' on the Infotainment system.  
Even if '0' or 'Off' is selected, the func  
-
-
5
-
僅 Depending on your update, the menu  
may be displayed as Warning Sound  
or Warning Methods.  
-
tion's Warning Volume will not turn off  
but the volume will sound as '1' or  
'Low'.  
Reverse Parking Distance Warn  
-
ing Operation  
僅 Steering Wheel Vibration Warning:  
Operating conditions  
Select 'User Settings → Driver Assis  
-
If 'Rear Active Assist' or 'Rear Warning  
Only' is set from the Settings menu,  
Reverse Parking Collision-Avoidance  
Assist will be in the ready status when  
the following conditions are satisfied:  
tance → Haptic warning' on the LCD  
display or 'Settings → Vehicle →  
Driver Assistance → Warning Methods  
→ Haptic warning' on the Infotain  
-
ment system.  
僅 The liftgate is closed  
僅 The gear is changed to R (Reverse)  
僅 Vehicle speed is below 10 km/h (6  
mph)  
Function components such as the rear  
view camera and the rear ultrasonic sen  
sors are in normal conditions  
NOTICE  
僅 Ensure that warning sound you have  
set may apply to the warning volume  
of other driver assistance systems.  
僅 Warning Methods will maintain its last  
setting even if the vehicle is restarted.  
僅 With the Warning Volume in '0' or  
'Off', if you turn off Steering Wheel  
Vibration Warning, the Warning Vol  
-
Rear Warning Only  
-
僅 If the function detects a risk of colli  
-
sion with a pedestrian or an object,  
5
177  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
the function will warn the driver with  
an audible warning, steering wheel  
vibration and warning message on  
the cluster. When Rear View Monitor  
is operating, a warning will appear on  
the infotainment system screen.  
僅 If 'Rear Warning Only' is selected,  
braking will not be assisted.  
僅 The warning will turn off when the  
gear is shifted to P (Park), N (Neutral)  
or D (Drive).  
僅 The brake control may not operate  
properly depending on the status of  
ESC (Electronic Stability Control).  
僅 There will only be a warning when:  
- The ESC (Electronic Stability Con  
-
trol) warning light is on  
- ESC (Electronic Stability Control) is  
engaged in a different function  
WARNING  
僅 Playing the vehicle audio system at  
high volume may prevent passengers  
Rear Active Assist  
僅 If the function detects a risk of colli  
from hearing Reverse Parking Colli  
-
-
sion-Avoidance Assist warning sounds  
sion with a pedestrian or an object,  
Reverse Parking Collision-Avoidance  
Assist will warn the driver with an  
audible warning, steering wheel vibra  
tion and warning message on the  
cluster. When Rear View Monitor is  
operating, a warning will appear on  
the infotainment system screen.  
僅 Noise may be heard when sudden  
braking occurs to avoid a collision.  
僅 If any other warning sound such as  
the seat belt warning chime is already  
generated, Reverse Parking Collision-  
Avoidance Assist warning may not  
sound.  
-
僅 The performance of Reverse Parking  
Collision-Avoidance Assist may vary  
under certain conditions. If vehicle  
speed is above 4 km/h (2 mph), the  
僅 If the function detects imminent colli  
sion with a pedestrian or an object  
behind the vehicle, the function will  
assist you with braking. The driver  
needs to pay attention as the brake  
assist will end within 2 seconds. The  
-
function will provide collision avoid  
-
ance assist only when pedestrians are  
detected. Always look around and pay  
driver must immediately depress the  
attention when backing up your vehi  
-
brake pedal and check vehicle sur  
-
cle.  
roundings.  
僅 Brake control will end when:  
- The gear is changed to P (Park) or  
D (Drive).  
- The driver depresses the brake  
pedal with sufficient power  
- Braking assist last for approxi  
-
mately 2 seconds  
僅 The warning will turn off when:  
- The driver changes the gear to P  
(Park), N (Neutral), or D (Drive)  
5
178  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
material, such as snow or rain, it may  
adversely affect camera performance  
Reverse Parking Distance Warn  
-
ing Malfunction and Limitations  
and Reverse Parking Collision-Avoid  
-
Reverse Parking Distance Warn  
ing malfunction  
-
ance Assist may not operate normally.  
Always keep the camera lens clean.  
OMQ4050221L  
OMQ4A042045  
When Reverse Parking Collision- Avoid  
-
The wide-rear ultrasonic sensors are  
located inside the rear bumper to detect  
objects in the rear area. If the sensors  
are covered with foreign material, such  
as snow or rain, it may adversely affect  
ance Assist or other related systems are  
not working properly, the 'Check Parking  
5
Collision-Avoidance Assist system' warn  
-
ing message will appear on the cluster,  
and the function will turn off automati  
-
sensor performance and Reverse Park-  
cally. Have your vehicle inspected by an  
authorized Kia dealer.  
ing Collision-Avoidance Assist may not  
operate normally. Always keep the rear  
bumper clean.  
Reverse Parking Distance Warn  
ing disabled  
-
Wide-rear view camera  
OMQ4051337L  
OMQ4A042594  
The rear view camera is used as a  
detecting sensor to detect pedestrians. If  
the camera lens is covered with foreign  
5
179  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
Wide-rear ultrasonic sensor  
僅 Rear view camera or rear ultrasonic  
sensor(s) is damaged  
僅 Rear view camera or the rear ultra  
-
sonic sensor(s) is stained with foreign  
matter, such as snow, dirt, etc.  
僅 Rear view camera is obscured by a  
light source or by inclement weather,  
such as heavy rain, fog, snow, etc.  
僅 The surrounding is very bright or very  
dark  
僅 Outside temperature is very high or  
very low  
OMQ4051222L  
僅 The wind is either strong (above 20  
The 'Rear camera error or blockage' or  
'Parking sensor error or blockage' warn  
ing message will appear on the cluster if  
the following situations occur:  
km/h (12 mph)) or blowing perpendic  
-
-
ular to the rear bumper  
僅 Objects generating excessive noise,  
such as vehicle horns, loud motorcy  
cle engines or truck air brakes, are  
near your vehicle  
僅 An ultrasonic sensor with similar fre  
quency is near your vehicle  
-
僅 The wide-rear view camera or ultra  
-
sonic sensors are covered with for  
-
eign material, such as snow or rain,  
etc.  
僅 There is inclement weather, such as  
heavy snow, heavy rain, etc.  
If this occurs, Reverse Parking Collision-  
Avoidance Assist may turn off or may  
not operate properly. Check whether the  
rear view camera and rear ultrasonic  
sensors are clean.  
-
僅 There is ground height difference  
between the vehicle and the pedes  
trian  
-
僅 The image of the pedestrian in the  
rear view camera is indistinguishable  
from the background  
僅 The pedestrian is near the rear edge  
of the vehicle  
僅 The pedestrian is not standing upright  
僅 The pedestrian is either very short or  
very tall for the function to detect  
僅 The pedestrian or cyclist is wearing  
clothing that easily blends into the  
background, making it difficult to  
detect  
僅 The pedestrian is wearing clothing  
that does not reflect ultrasonic waves  
well  
僅 Size, thickness, height, or shape of the  
object does not reflect ultrasonic  
Limitations of Reverse Parking  
Distance Warning  
Reverse Parking Collision-Avoidance  
Assist may not assist braking or warn the  
driver even if there are pedestrians or  
objects under the following circum  
-
stances:  
僅 Any non-factory equipment or acces  
-
sory is installed  
僅 Your vehicle is unstable due to an  
accident or other causes  
僅 Bumper height or rear ultrasonic sen  
sor installation has been modified  
-
5
180  
Driving your vehicle  
Reverse Parking Collision-Avoidance Assist (PCA)  
waves well (e.g., pole, bush, curbs,  
carts, edge of a wall, etc.)  
cle engines or truck air brakes, are  
near your vehicle  
僅 The pedestrian or the object is moving  
僅 The pedestrian or the object is very  
close to the rear of the vehicle  
僅 A wall is behind the pedestrian or the  
object  
僅 The object is not located at the rear  
center of your vehicle  
僅 The object is not parallel to the rear  
bumper  
僅 The road is slippery or inclined  
僅 Your vehicle is backing towards a nar  
row passage or parking space  
僅 Your vehicle is backing towards an  
uneven road surface, such as an  
unpaved road, gravel, bump, gradient,  
etc.  
僅 A trailer or carrier is installed on the  
rear of your vehicle  
-
僅 An ultrasonic sensor with similar fre  
-
quency is near your vehicle  
僅 The driver backs up the vehicle imme  
-
diately after shifting to R (Reverse)  
僅 The driver accelerates or circles the  
vehicle  
Reverse Parking Collision-Avoidance  
Assist may unnecessarily warn the driver  
or assist with braking even if there are  
5
no pedestrians or objects under the fol  
-
lowing circumstances:  
僅 Any non-factory equipment or acces  
-
sory is installed  
僅 Your vehicle is unstable due to an  
accident or other causes  
僅 Bumper height or rear ultrasonic sen  
-
sor installation has been modified  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
-
僅 Rear view camera or the rear ultra  
-
sonic sensor(s) is stained with foreign  
matter, such as snow, dirt, etc.  
僅 The pattern on the road is mistaken  
for a pedestrian  
僅 There is shadow or light reflecting on  
the ground  
僅 Pedestrians or objects are around the  
path of the vehicle  
僅 Objects generating excessive noise,  
such as vehicle horns, loud motorcy  
-
5
181  
Driving your vehicle  
Economical operation  
僅 Keep your vehicle in good condition.  
For better fuel economy and reduced  
maintenance costs, maintain your  
Economical operation  
Your vehicle's fuel economy depends  
mainly on your style of driving, where  
you drive and when you drive.  
vehicle in accordance with the main  
-
tenance schedule in "Scheduled main  
-
Each of these factors affects how many  
kilometers (miles) you can get from a  
liter (gallon) of fuel. To operate your  
vehicle as economically as possible, use  
the following driving suggestions to help  
save money in both fuel and repairs:  
僅 Drive smoothly. Accelerate at a mod  
erate rate. Don't make "jackrabbit"  
starts or full-throttle shifts and main  
tain a steady cruising speed. Don't  
race between stoplights. Try to adjust  
your speed to the traffic so you don't  
have to change speeds unnecessar  
ily. Avoid heavy traffic whenever pos  
sible.  
Always maintain a safe distance from  
other vehicles so you can avoid  
unnecessary braking. This also  
reduces brake wear.  
僅 Drive at a moderate speed. The faster  
you drive, the more fuel your vehicle  
uses. Driving at a moderate speed,  
especially on the highway, is one of  
the most effective ways to reduce fuel  
consumption.  
tenance service" on page 7-9. If you  
drive your vehicle in severe condi  
-
tions, more frequent maintenance is  
required (Refer to "Maintenance  
under severe usage conditions" on  
page 7-12 and).  
僅 Travel lightly. Don't carry unnecessary  
weight in your vehicle. Weight  
reduces fuel economy.  
僅 Don't let the engine idle longer than  
necessary. If you are waiting (and not  
in traffic), turn off your engine and  
restart only when you're ready to go.  
僅 Don't "lug" or "over-rev" the engine.  
Lugging is driving too slowly in too  
high a gear resulting in the engine  
bucking. If this happens, shift to a  
lower gear. Over-revving is racing the  
engine beyond its safe limit. This can  
-
-
-
-
be avoided by shifting at the recom  
-
mended speeds.  
僅 Open windows at high speeds can  
reduce fuel economy.  
僅 Fuel economy is less in crosswinds  
and headwinds. To help offset some  
of this loss, slow down when driving in  
these conditions.  
Keeping a vehicle in good operating  
condition is important both for economy  
and safety.  
僅 Take care of your tires. Keep them  
inflated to the recommended pres  
sure. Incorrect inflation, either too  
much or too little, results in unneces  
sary tire wear. Check the tire pres  
sures at least once a month.  
-
-
-
Therefore, have the function checked by  
an authorized Kia dealer.  
僅 Be sure that the wheels are aligned  
correctly. Improper alignment can  
result from hitting curbs or driving too  
fast over irregular surfaces. Poor  
alignment causes faster tire wear and  
may also result in other problems as  
well as greater fuel consumption.  
WARNING  
Engine off during motion  
Never turn the engine off to coast down  
hills or anytime the vehicle is in motion.  
The power steering and power brakes  
5
182  
Driving your vehicle  
Declaration of conformity  
will not function properly without the  
engine running. In addition, turning off  
the ignition while driving could engage  
the steering wheel lock resulting in loss  
of vehicle steering. Keep the engine on  
and downshift to an appropriate gear for  
engine braking effect.  
Declaration of conformity (if  
equipped)  
The radio frequency components  
(Front Radar) complies:  
For United States and United  
States territories  
5
OANATEL002  
OSKEV052517L  
For Canada  
OSKEV052518L  
5
183  
Driving your vehicle  
Declaration of conformity  
For Mexico  
For Canada  
OSKEV052511L  
The radio frequency components  
(Rear Corner Radar) complies:  
For United States and United  
States territories  
OMQ4PH052523N  
For Mexico  
OANATEL002  
OMQ4PH052524N  
OMQ4PH052522N  
5
184  
Driving your vehicle  
Special driving conditions  
slung sports vehicles are designed to  
Special driving conditions  
perform satisfactorily in off-road condi  
-
If driving conditions deteriorate due to  
poor weather or road conditions, you  
should pay even more attention than  
usual to your driving.  
tions. Due to this risk, driver and passen  
gers are strongly recommended to  
buckle their seat belts.  
In a rollover crash, an unbelted person is  
significantly more likely to die than a  
person wearing a seat belt. There are  
steps that a driver can make to reduce  
the risk of a rollover.  
If at all possible, avoid sharp turns or  
abrupt maneuvers, do not load your roof  
rack with heavy cargo, and never modify  
your vehicle in any way.  
-
Hazardous driving conditions  
When hazardous driving conditions are  
encountered such as water, snow, ice,  
mud, sand, or similar hazards, follow  
these suggestions:  
僅 Drive cautiously and allow extra dis  
tance for braking.  
僅 Avoid sudden braking or steering.  
僅 Do not pump the brake pedal on a  
vehicle equipped with ABS.  
僅 If stalled in snow, mud, or sand, use  
the second gear. Accelerate slowly to  
avoid spinning the drive wheels.  
僅 Use sand, rock salt, or other nonslip  
material under the drive wheels to  
provide traction when stalled in ice,  
snow, or mud.  
-
WARNING  
Rollover  
As with other Sports Utility Vehicle  
(SUV), failure to operate this vehicle cor  
rectly may result in loss of control, an  
accident or vehicle rollover.  
僅 Utility vehicles have a significantly  
higher rollover rate than other types  
of vehicles.  
-
5
僅 Specific design characteristics (higher  
ground clearance, narrower track,  
etc.) give this vehicle a higher center  
of gravity than ordinary vehicles.  
僅 A SUV is not designed for cornering at  
the same speeds as conventional  
vehicles.  
Reducing the risk of a rollover  
This multi-purpose passenger vehicle is  
defined as a Sports Utility Vehicle (SUV).  
Utility vehicles have a significantly  
higher rollover rate than other types of  
vehicles. SUVs have higher ground  
clearance and a narrower track to make  
them capable of performing in a wide  
variety of offroad applications.  
僅 Avoid sharp turns or abrupt maneu  
-
vers.  
僅 In a rollover crash, an unbelted person  
is significantly more likely to die than  
a person wearing a seat belt. Make  
Specific design characteristics give them  
a higher center of gravity than ordinary  
vehicles. An advantage of the higher  
ground clearance is a better view of the  
road, which allows you to anticipate  
problems.  
sure everyone in the vehicle is prop  
-
erly buckled up.  
WARNING  
They are not designed for cornering at  
Your vehicle is equipped with tires  
designed to provide safe ride and han  
the same speeds as conventional pas  
-
-
senger vehicles, any more than low-  
5
185  
Driving your vehicle  
Special driving conditions  
dling capability. Do not use tires and  
wheels that are different in size and type  
from the originally installed ones. It can  
affect the safety and performance of  
Do not spin the wheels, especially at  
speeds more than 56 km/h (35 mph).  
Spinning the wheels at high speeds  
when the vehicle is stationary could  
overheat and damage tires, and the  
rotating wheels may fly away and injure  
bystanders.  
your vehicle, which could lead to steer  
-
ing failure or rollover and serious injury.  
When replacing the tires, be sure to  
equip all four tires with the tire and  
wheel of the same size, type, tread,  
brand and load-carrying capacity.  
NOTICE  
The Electronic Stability Control (ESC)  
should be turned OFF prior to rocking  
the vehicle.  
Rocking the vehicle  
If it is necessary to rock the vehicle to  
free it from snow, sand, or mud, first  
turn the steering wheel right and left to  
clear the area around your front wheels.  
Then, shift back and forth between R  
(Reverse) and any forward gear.  
Smooth cornering  
Do not race the engine, and spin the  
wheels as little as possible. If you are still  
stuck after a few tries, have the vehicle  
pulled out by a tow vehicle to avoid  
engine overheating and possible dam  
age to the transmission.  
-
WARNING  
Sudden vehicle movement  
OMQ4051198L  
Do not attempt to rock the vehicle if  
Avoid braking or gear changing in cor  
-
people or objects are nearby. The vehi  
cle may suddenly move forward or  
backwards as it becomes unstuck.  
-
ners, especially when roads are wet. Ide  
ally, corners should always be taken  
under gentle acceleration. If you follow  
-
these suggestions, tire wear will be held  
to a minimum.  
CAUTION  
Vehicle rocking  
Prolonged rocking may cause vehicle  
overheating, transmission damage or  
failure, and tire damage.  
CAUTION  
Spinning tires  
5
186  
Driving your vehicle  
Special driving conditions  
Driving at night  
Driving in the rain  
OMQ4051199  
OMQ4A061016  
Because night driving presents more  
hazards than driving in the daylight,  
here are some important tips to remem  
ber:  
Rain and wet roads can make driving  
dangerous, especially if you're not pre  
pared for the slick pavement.  
Here are a few things to consider when  
driving in the rain:  
-
-
僅 Slow down and keep more distance  
between you and other vehicles, as it  
may be more difficult to see at night,  
especially in areas where there may  
not be any street lights.  
5
僅 A heavy rainfall will make it harder to  
see and will increase the distance  
needed to stop your vehicle, so slow  
down.  
僅 Adjust your mirrors to reduce the  
glare from other driver's headlamps.  
僅 Keep your headlamps clean and prop  
erly aimed. (On vehicles not equipped  
with the automatic headlamp aiming  
feature.) Dirty or improperly aimed  
headlamps will make it much more  
difficult to see at night.  
僅 Keep your windshield wiping equip  
-
ment in good shape. Replace your  
-
windshield wiper blades when they  
show signs of streaking or missing  
areas on the windshield.  
僅 If your tires are not in good condition,  
making a quick stop on wet pavement  
can cause a skid and possibly lead to  
an accident. Be sure your tires are in  
good shape.  
僅 Avoid staring directly at the head  
lamps of oncoming vehicles. You  
-
could be temporarily blinded, and it  
will take several seconds for your eyes  
to readjust to the darkness.  
僅 Turn on your headlamps to make it  
easier for others to see you.  
僅 Driving too fast through large puddles  
can affect your brakes. If you must go  
through puddles, try to drive through  
them slowly.  
僅 If you believe you may have gotten  
your brakes wet, apply them lightly  
while driving until normal braking  
operation returns.  
5
187  
Driving your vehicle  
Special driving conditions  
Avoid using worn or damaged tires  
which may result in reduced traction or  
tire failure.  
Never exceed the maximum tire inflation  
pressure shown on the tires.  
Hydroplaning  
If the road is wet enough and you are  
going fast enough, your vehicle may  
have little or no contact with the road  
surface and actually ride on the water.  
The best advice is SLOW DOWN when  
the road is wet.  
WARNING  
Under/over inflated tires  
The risk of hydroplaning increases as  
the depth of tire tread decreases,  
refer to"Tires and wheels" on page 8-6.  
Always check the tires for proper infla  
-
tion before driving. Under inflated or  
overinflated tires can cause poor han  
-
dling, loss of vehicle control, and sudden  
tire failure, leading to accidents, injuries,  
and even death. For proper tire pres  
sures, refer to "Tires and wheels" on  
page 8-6.  
Driving in flooded areas  
Avoid driving through flooded areas  
unless you are sure the water is no  
higher than the bottom of the wheel  
hub. Drive through any water slowly.  
Allow adequate stopping distance  
because brake performance may be  
affected.  
-
WARNING  
Tire tread  
Always check the tire tread before driv  
-
After driving through water, dry the  
brakes by gently applying them several  
times while the vehicle is moving slowly.  
ing your vehicle. Worn-out tires can  
result in loss of vehicle control. Worn-out  
tires should be replaced as soon as pos  
sible. For further information and tread  
limits, refer to "Tires and wheels" on  
page 8-6.  
-
Highway driving  
Fuel, engine coolant and engine  
oil  
High speed travel consumes more fuel  
than urban motoring. Do not forget to  
check both the engine coolant and  
engine oil.  
Drive belt  
OMQ4051203  
A loose or damaged drive belt may  
result in overheating of the engine.  
Tires  
Adjust the tire inflation pressures to  
specification. Low tire inflation pressures  
will result in overheating and possible  
failure of the tires.  
5
188  
Driving your vehicle  
Winter driving  
Do not install studded tires without first  
Winter driving  
checking local, state and municipal reg  
-
Severe weather conditions in the winter  
ulations for possible restrictions against  
their use.  
result in greater wear and other prob  
lems.  
-
To minimize the problems of winter driv  
ing, you should follow these sugges  
tions:  
-
WARNING  
Snow tire size  
Snow tires should be equivalent in size  
and type to the vehicle's standard tires.  
Otherwise, the safety and handling of  
your vehicle may be adversely affected.  
-
Snowy or icy conditions  
To drive your vehicle in deep snow, it  
may be necessary to use snow tires on  
your tires.  
Use high quality ethylene glycol  
coolant  
If snow tires are needed, it is necessary  
to select tires equivalent in size and type  
of the original equipment tires. Failure to  
do so may adversely affect the safety  
Your vehicle is delivered with high qual  
-
ity ethylene glycol coolant in the cooling  
system. It is the only type of coolant that  
should be used because it helps prevent  
and handling of your vehicle. Further  
-
more, speeding, rapid acceleration, sud  
-
5
den brake applications, and sharp turns  
are potentially very hazardous practices.  
corrosion in the cooling system, lubri  
-
cates the water pump and prevents  
During deceleration, use vehicle braking  
freezing. Be sure to replace or replenish  
your coolant in accordance with the  
maintenance schedule in section 8.  
to the fullest extent. Sudden brake appli  
-
cations on snowy or icy roads may cause  
skids to occur. You need to keep suffi  
-
Before winter, have your coolant tested  
cient distance between the vehicle in  
to assure that its freezing point is suffi  
cient for the temperatures anticipated  
during the winter.  
-
operation in front of your vehicle. Also,  
apply the brake gently.  
Snow tires  
Check battery and cables  
If you mount snow tires on your vehicle,  
make sure they are radial tires of the  
same size and load range as the original  
tires. Mount snow tires on all four wheels  
to balance your vehicle's handling in all  
weather conditions. Keep in mind that  
the traction provided by snow tires on  
dry roads may not be as high as your  
vehicle's original equipment tires. You  
should drive cautiously even when the  
roads are clear. Check with the tire  
Winter puts additional burdens on the  
battery system. Visually inspect the bat  
-
tery and cables as described in section  
8. Have the level of charge in your bat  
tery checked by an authorized Kia  
dealer.  
-
Change to "winter weight" oil if  
necessary  
In some climates it is recommended that  
a lower viscosity "winter weight" oil be  
used during cold weather. See "Recom  
dealer for maximum speed recommen  
dations.  
-
-
5
189  
Driving your vehicle  
Winter driving  
mended lubricants and capacities" on  
page 8-7. If you aren't sure what weight  
oil you should use, consult an authorized  
Kia dealer.  
tion. This is most likely to happen when  
there is an accumulation of snow or ice  
around or near the rear brakes or if the  
brakes are wet. If there is a risk the park  
-
ing brake may freeze, temporarily apply  
it with the gear in P (Park). Also, block  
Check spark plugs and ignition  
system  
Inspect your spark plugs as described in  
"Scheduled maintenance service" on  
page 7-9 and replace them if necessary.  
the rear wheels in advance, so the vehi  
-
-
cle may not roll. Then release the park  
ing brake.  
Don't let ice and snow accumu  
late underneath  
-
Also check all ignition wiring and compo  
nents to be sure they are not cracked,  
worn or damaged in any way.  
-
Under some conditions, snow and ice  
can build up under the fenders and  
interfere with the steering. When driving  
in severe winter conditions where this  
may happen, you should periodically  
check underneath the vehicle to be sure  
the movement of the front wheels and  
the steering components is not  
obstructed.  
To keep locks from freezing  
To keep the locks from freezing, squirt  
an approved de-icer fluid or glycerine  
into the key opening. If a lock is covered  
with ice, squirt it with an approved de-  
icing fluid to remove the ice. If the lock is  
frozen internally, you may be able to  
thaw it out by using a heated key. Han  
dle the heated key with care to avoid  
injury.  
-
Carry emergency equipment  
Depending on the severity of the  
weather, you should carry appropriate  
emergency equipment. Some of the  
items you may want to carry include tire  
chains, tow straps or chains, flashlight,  
emergency flares, sand, shovel, jumper  
cables, window scraper, gloves, ground  
cloth, coveralls, blanket, etc.  
Use approved window washer  
anti-freeze in system  
To keep the water in the window washer  
system from freezing, add an approved  
window washer anti-freeze solution in  
accordance with instructions on the con  
tainer. Window washer anti-freeze is  
available from an authorized Kia dealer  
and most auto parts outlets. Do not use  
engine coolant or other types of anti-  
freeze as these may damage the paint  
finish.  
-
Do not place objects or materials  
in the engine compartment  
Putting objects or materials in the  
engine compartment may cause an  
engine failure or combustion, because  
they may block the engine cooling. Such  
damage will not be covered by the man  
-
Don't let your parking brake  
freeze  
Under some conditions your parking  
brake can freeze in the engaged posi  
ufacturer's warranty.  
-
5
190  
Driving your vehicle  
Trailer towing  
Drive your vehicle when water  
Trailer towing (if equipped)  
vapor condenses and accumu  
-
If you are considering towing with your  
vehicle, you should first check with your  
country's Department of Motor Vehicles  
to determine their legal requirements.  
lates inside the exhaust pipes  
When the vehicle is stopped for a long  
time in winter while the engine is run  
-
ning, water vapor may condense and  
accumulate inside the exhaust pipes.  
Water in the exhaust pipes may cause  
noise, etc., but it is drained driving at  
medium to high speed.  
Since laws vary the requirements for  
towing trailers, cars, or other types of  
vehicles or apparatus may differ. Kia  
recommends to ask an authorized Kia  
dealer.  
WARNING  
Towing a trailer  
If you don't use the correct equipment  
and drive improperly, you can lose con  
-
trol when you pull a trailer. For example,  
if the trailer is too heavy, the brakes may  
not work well - or even at all. You and  
your passengers could be seriously or  
fatally injured. Pull a trailer only if you  
5
have followed all the steps in this sec  
-
tion.  
WARNING  
Weight limits  
Before towing, make sure the total trailer  
weight, gross combination weight, gross  
vehicle weight, gross axle weight and  
trailer tongue load are all within the lim  
-
its.  
CAUTION  
Any part of the rear number plate or  
lighting devices of the vehicle must not  
be obscured by the mechanical coupling  
device. If the rear number plate and/or  
lighting devices can be obscured par  
-
tially by any part of the mechanical cou  
pling device, mechanical coupling  
devices that can not be easily removed  
or repositioned without use of any  
tool, except an easily operated (i.e. an  
-
5
191  
Driving your vehicle  
Trailer towing  
effort not exceeding 20 N·m) release key  
which is supplied by the manufacturer of  
the coupling device, are not permitted  
for use. Please note that the mechanical  
coupling device that is fitted and not in  
use must always be removed or reposi  
tioned if the rear number plate and/or  
rear lighting devices are obscured by  
any part of the mechanical coupling  
device.  
your vehicle, refer to "Weight of the  
trailer" on page 5-197 that appears later  
in this section.  
Remember that trailering is different  
than just driving your vehicle by itself.  
Trailering means changes in handling,  
durability, and fuel economy. Successful,  
-
safe trailering requires correct equip  
ment, and it has to be used properly.  
-
This section contains many timetested,  
important trailering tips and safety rules.  
Many of these are important for your  
safety and that of your passengers.  
Please read this section carefully before  
you pull a trailer.  
Load-pulling components such as the  
engine, transmission, wheel assemblies,  
and tires are forced to work harder  
against the load of the added weight.  
The engine is required to operate at rela  
tively higher speeds and under greater  
loads. This additional burden generates  
extra heat. The trailer also considerably  
adds wind resistance, increasing pulling  
requirements.  
NOTICE  
僅 The technically permissible maximum  
load on the rear axle(s) may be  
exceeded by not more than 15 % and  
the technically permissible maximum  
laden mass of the vehicle may be  
exceeded by not more than 10 % or  
100 kg (220.4 lbs), whichever value is  
lower. In this case, do not exceed 100  
km/h (60 mph) for vehicle of category  
M1 or 80 km/h (50 mph) for vehicle of  
category N1.  
-
僅 When towing a trailer, the additional  
load imposed at the trailer coupling  
device may cause the rear tire maxi  
-
mum load ratings to be exceeded, but  
not by more than 15%. In such a case,  
do not exceed 100km/h (60 miles),  
and the rear tire pressure should be at  
least 20 kPa above the tire pressure(s)  
as recommended for normal use (i.e.  
without a trailer attached).  
CAUTION  
Pulling a trailer improperly can damage  
your vehicle and result in costly repairs  
not covered by your warranty. To pull a  
trailer correctly, follow the advice in this  
section.  
OMQ4A052279  
NOTICE  
Location of trailer mounting  
The mounting hole for hitches are  
located on both sides of the underbody  
behind the rear tires.  
Your vehicle can tow a trailer. To identify  
what the vehicle trailering capacity is for  
5
192  
Driving your vehicle  
Trailer towing  
country's regulations and that it is prop  
erly installed and operating correctly.  
If your trailer weighs more than the max  
imum trailer weight without trailer  
brakes loaded, then it needs its own  
brakes and they must be adequate. Be  
sure to read and follow the instructions  
for the trailer brakes so you'll be able to  
-
Hitches  
It's important to have the correct hitch  
equipment. Crosswinds, large trucks  
going by, and rough roads are a few rea  
sons why you'll need the right hitch.  
Here are some rules to follow:  
-
-
僅 Do you have to make any holes in the  
body of your vehicle when you install  
a trailer hitch? If you do, then be sure  
to seal the holes later when you  
remove the hitch.  
If you don't seal them, deadly carbon  
monoxide (CO) from your exhaust  
can get into your vehicle, as well as  
dirt and water.  
僅 The bumpers on your vehicle are not  
intended for hitches. Do not attach  
rental hitches or other bumper-type  
hitches. Use only a frame-mounted  
hitch that does not attach to the  
bumper.  
install, adjust and maintain them prop  
-
erly.  
僅 Don't tap into your vehicle's brake  
system.  
WARNING  
Trailer brakes  
Do not use a trailer with its own brakes  
unless you are absolutely certain that  
you have properly set up the brake sys  
-
tem. This is not a task for amateurs. Use  
an experienced, competent trailer shop  
for this work.  
5
僅 Kia trailer hitch accessory is available  
at an authorized Kia dealer.  
Driving with a trailer  
Towing a trailer requires a certain  
amount of experience. Before setting  
out for the open road, you must get to  
know your trailer. Acquaint yourself with  
the feel of handling and braking with the  
added weight of the trailer. And always  
keep in mind that the vehicle you are  
driving is now a good deal longer and  
not nearly so responsive as your vehicle  
is by itself.  
Safety chains  
You should always attach chains  
between your vehicle and your trailer.  
Cross the safety chains under the  
tongue of the trailer so that the tongue  
will not drop to the road if it becomes  
separated from the hitch.  
Instructions about safety chains may be  
provided by the hitch manufacturer or  
by the trailer manufacturer. Follow the  
manufacturer's recommendation for  
attaching safety chains. Always leave  
just enough slack so you can turn with  
your trailer. And, never allow safety  
chains drag on the ground.  
Before you start, check the trailer hitch  
and platform, safety chains, electrical  
connector(s), lights, tires and mirror  
adjustment. If the trailer has electric  
brakes, start your vehicle and trailer  
moving and then apply the trailer brake  
controller by hand to be sure the brakes  
are working. This lets you check your  
electrical connection at the same time.  
Trailer brakes  
If your trailer is equipped with a braking  
system, make sure it conforms to your  
5
193  
Driving your vehicle  
Trailer towing  
During your trip, check occasionally to  
be sure that the load is secure, and that  
the lights and trailer brakes are still  
working.  
and extra wiring. The green arrows on  
your instrument panel will flash when  
-
ever you signal a turn or lane change.  
Properly connected, the trailer lights will  
also flash to alert other drivers you're  
about to turn, change lanes, or stop.  
When towing a trailer, the green arrows  
on your instrument panel will flash for  
turns even if the bulbs on the trailer are  
burned out. Thus, you may think drivers  
behind you are seeing your signals  
when, in fact, they are not. It's important  
to check occasionally to be sure the  
trailer bulbs are still working. You must  
Following distance  
Stay at least twice as far behind the  
vehicle ahead as you would when driv  
ing your vehicle without a trailer. This  
can help you avoid situations that  
-
require heavy braking and sudden turns.  
Passing  
also check the lights every time you dis  
connect and then reconnect the wires.  
-
You'll need more passing distance up  
ahead when you're towing a trailer. And,  
because of the increased vehicle length,  
you'll need to go much farther beyond  
the passed vehicle before you can return  
to your lane.  
Do not connect a trailer lighting system  
directly to your vehicle's lighting system.  
Use only an approved trailer wiring har  
-
ness.  
Have yourself assisted by a professional  
workshop in installing the wiring har  
-
Backing up  
ness.  
Hold the bottom of the steering wheel  
with one hand. Then, to move the trailer  
to the left, just move your hand to the  
left. To move the trailer to the right,  
move your hand to the right. Always  
back up slowly and, if possible, have  
someone guide you.  
Kia recommends to visit an authorized  
Kia dealer.  
WARNING  
Failure to use an approved trailer wiring  
harness could result in damage to the  
vehicle electrical system and/or personal  
injury.  
Making turns  
When you're turning with a trailer, make  
wider turns than normal. Do this so your  
trailer won't strike soft shoulders, curbs,  
road signs, trees, or other objects. Avoid  
jerky or sudden maneuvers. Signal well  
in advance.  
Detection of trailer light connec  
tion  
-
This functionality is only given with gen  
-
uine accessories (tow bar and wiring  
harness) that recognize when a trailer is  
connected and consequently inform the  
vehicle systems. Trailer recognition  
Turn signals when towing a  
trailer  
When you tow a trailer, your vehicle has  
to have a different turn signal flasher  
works as follows: when a trailer socket is  
plugged in, either the brake pedal shall  
be pushed or turn signal lamps acti  
-
5
194  
Driving your vehicle  
Trailer towing  
vated; the electronic control unit will  
then detect the trailer because of the  
power consumption by the trailer light  
ing and inform the vehicle systems.  
When the trailer is disconnected, the  
brake pedal shall be pushed again or  
overheat. If the needle of the coolant  
temperature gauge moves across the  
dial towards "H (HOT) (or 260 °F/130  
°C)", pull over and stop as soon as it is  
safe to do so, and allow the engine to  
-
idle until it cools down. You may pro  
-
turn signal lamps activated for the con  
-
ceed once the engine has cooled suf  
ficiently.  
-
trol unit to be able to detect that there is  
no power consumption anymore by  
trailer lighting; the assistance systems  
that were turned off will automatically  
turn on again.  
It is the driver's responsibility to ensure  
that all electrical connections are work  
ing and all trailer lights are operating  
僅 You must decide the driving speed  
depending on trailer weight and uphill  
grade to reduce the possibility of  
engine and transmission overheating.  
-
Parking on hills  
before and during towing. You must per  
form manual checks.  
-
Generally, if you have a trailer attached  
to your vehicle, you should not park your  
vehicle on a hill. People can be seriously  
or fatally injured, and both your vehicle  
CAUTION  
Use only genuine electrical connections.  
Do not attempt to arbitrarily splice or  
directly connect the trailer wiring using  
any other methods. Doing so may dam  
age the vehicle's electrical system,  
resulting in malfunctions.  
5
and the trailer can be damaged if unex  
-
pectedly roll down hill.  
WARNING  
Parking on a hill  
Parking your vehicle on a hill with a  
trailer attached could cause serious  
-
injury or death, should the trailer break  
loose.  
Driving on grades  
Reduce the speed and shift to a lower  
gear before you start down a long or  
steep downgrade. If you don't shift  
down, you might have to use your  
However, if you ever have to park your  
trailer on a hill, here's how to do it:  
1. Pull the vehicle into the parking space.  
brakes so much that they would get hot  
and no longer operate efficiently.  
On a long uphill grade, shift down and  
reduce your speed to around 70 km/h  
(45 mph) to reduce the possibility of  
engine and transmission overheating.  
Turn the steering wheel in the direc  
-
tion of the curb (right if headed down  
hill, left if headed up hill).  
2. Set the parking brake and shut off the  
vehicle.  
3. Place chocks under the trailer wheels  
on the down hill side of the wheels.  
4. Start the vehicle, hold the brakes, shift  
to neutral, release the parking brake  
and slowly release the brakes until the  
trailer chocks absorb the load.  
CAUTION  
僅 When towing a trailer on steep grades  
(in excess of 6 %) pay close attention  
to the engine coolant temperature  
gauge to ensure the engine does not  
5
195  
Driving your vehicle  
Trailer towing  
5. Reapply the brakes, reapply the park  
-
Don't forget to also maintain your trailer  
and hitch. Follow the maintenance  
schedule that accompanied your trailer  
and check it periodically. Preferably,  
conduct the check at the start of each  
day's driving. Most importantly, all hitch  
nuts and bolts should be tight.  
ing brake.  
6. Shut off the vehicle and release the  
vehicle brakes but leave the parking  
brake set.  
WARNING  
Parking brake  
It can be dangerous to get out of your  
CAUTION  
僅 Due to higher load during trailer  
usage, overheating might occur in hot  
days or during uphill driving. If the  
coolant gauge indicates overheating,  
switch off the A/C and stop the vehi  
cle in a safe area to cool down the  
engine.  
vehicle if the parking brake is not firmly  
set.  
If you have left the engine running, the  
vehicle can move suddenly. You or oth  
-
-
ers could be seriously or fatally injured.  
僅 When towing, check the transmission  
fluid more frequently.  
僅 If your vehicle is not equipped with an  
air conditioner, you should install a  
When you are ready to leave  
after parking on a hill  
1. Apply your brakes and hold the brake  
pedal down while you:  
僅 Start your engine;  
僅 Shift into gear; and  
僅 Release the parking brake.  
2. Slowly remove your foot from the  
brake pedal.  
3. Drive slowly until the trailer is clear of  
the chocks.  
4. Stop and have someone pick up and  
store the chocks.  
condenser fan to improve engine per  
-
formance when towing a trailer.  
If you do decide to pull a trailer  
Here are some important points if you  
decide to pull a trailer:  
僅 Consider using a sway control. You  
can ask a hitch dealer about sway  
control.  
僅 Do not do any towing with your vehi  
-
cle during its first 2,000 km (1,200  
Maintenance when trailer towing  
Your vehicle will need service more  
often when you regularly pull a trailer.  
miles) in order to allow the engine to  
properly break in. Failure to heed this  
caution may result in serious engine  
or transmission damage.  
僅 When towing a trailer, consult an  
authorized Kia dealer on additional  
requirements such as a towing kit, etc.  
Important items to pay particular atten  
tion to include engine oil, axle lubricant  
and cooling system fluid. Brake condi  
tion is another important item to fre  
quently check. Each item is covered in  
this manual, and the Index will help you  
find them quickly. If you're trailering, it's  
a good idea to review these sections  
before you start your trip.  
-
-
-
僅 Always drive your vehicle at a moder  
ate speed (less than 100 km/h (60  
mph)).  
-
5
196  
Driving your vehicle  
Trailer towing  
僅 On a long uphill grade, do not exceed  
僅 The chart contains important consid  
-
70 km/h (45 mph) or the posted tow  
-
erations that have to do with weight:  
ing speed limit, whichever is lower.  
Item  
Smartstream G2.5 GDi  
Smartstream G2.5 T-GDi  
907 kg (2,000 lbs.)  
Standard  
-
907 kg (2,000 lbs.)  
-
With brake sys  
tem  
Maximum  
-
Package  
1,588 kg (3,500 lbs.)  
trailer weight  
Without brake system  
750 kg (1,653 lbs.)  
Maximum tongue weight  
100 kg (220 lbs.)  
Weight of the trailer  
Weight of the trailer tongue  
5
OUM076210L  
A: Tongue Load  
OUM076211L  
A: Gross Axle Weight  
B: Total Trailer Weight  
B: Gross Vehicle Weight  
What is the maximum safe weight of a  
The tongue load of any trailer is an  
important weight to measure because it  
affects the total gross vehicle weight  
(GVW) of your vehicle. This weight  
includes the curb weight of the vehicle,  
any cargo you may carry in it, and the  
people who will be riding in the vehicle.  
And if you tow a trailer, you must add  
the tongue load to the GVW because  
your vehicle will also be carrying that  
weight.  
trailer? It should never weigh more than  
the maximum trailer weight with trailer  
brakes. But even that can be too heavy.  
It depends on how you plan to use your  
trailer. For example, speed, altitude, road  
grades, outside temperature and how  
often your vehicle is used to pull a trailer  
are all important. The ideal trailer weight  
can also depend on any special equip  
-
ment that you have on your vehicle.  
The trailer tongue should weigh a maxi  
-
mum of 10 % of the total loaded trailer  
weight, within the limits of the maximum  
trailer tongue load permissible.  
After you've loaded your trailer, weigh  
the trailer and then the tongue, sepa  
-
5
197  
Driving your vehicle  
Vehicle load limit  
rately, to see if the weights are proper. If  
they aren't, you may be able to correct  
them simply by moving some items  
around in the trailer.  
Vehicle load limit  
The vehicle load limit is displayed on the  
tire and loading information label on the  
driver's door.  
WARNING  
Trailer  
僅 Never load a trailer with more weight  
in the rear than in the front. The front  
should be loaded with approximately  
60% of the total trailer load; the rear  
should be loaded with approximately  
40% of the total trailer load.  
Tire and loading information  
label  
The label located on the driver's door sill  
gives the original tire size, cold tire pres  
sures recommended for your vehicle,  
the number of people that can be in  
-
your vehicle and vehicle capacity weight.  
僅 Never exceed the maximum weight  
limits of the trailer or trailer towing  
equipment. Improper loading can  
result in damage to your vehicle and/  
or personal injury. Check weights and  
loading at a commercial scale or high  
way patrol office equipped with  
scales.  
Example for spare tire  
-
僅 An improperly loaded trailer can  
cause loss of vehicle control.  
OMQ4A060052  
Vehicle capacity weight:  
僅 6 seats: 468 kg (1,032 lbs.)  
僅 7 seats: 546 kg (1,204 lbs.)  
Vehicle capacity weight is the maximum  
combined weight of occupants and  
cargo. If your vehicle is equipped with a  
trailer, the combined weight includes the  
tongue load.  
Seating capacity:  
Total: 6/7 persons (Front seat: 2 persons,  
Rear seat: 4/5 persons)  
Seating capacity is the maximum num  
-
ber of occupants including a driver, your  
vehicle may carry.  
5
198  
Driving your vehicle  
Vehicle load limit  
However, the seating capacity may be  
reduced based upon the weight of all of  
the occupants, and the weight of the  
cargo being carried or towed.  
Do not overload the vehicle as there is a  
limit to the total weight, or load limit  
3. Subtract the combined weight of the  
driver and passengers from XXX lbs.  
or XXX kg.  
4. The resulting figure equals the avail  
able amount of cargo and luggage  
load capacity. For example, if the  
"XXX" amount equals 635 kg (1400  
-
including occupants and cargo, the vehi  
-
cle can carry.  
lbs.) and there will be five 68 kg (150  
lbs.) passengers in your vehicle, the  
amount of available cargo and lug  
gage load capacity is 295 kg (650  
lbs.). (635-340 (5x68) = 295 kg or  
1400-750 (5x150) = 650 lbs.)  
-
Towing capacity:  
僅 Smartstream G2.5 GDi  
- Without trailer brakes: 750 kg  
(1,653 lbs.)  
- With trailer brakes: 907 kg (2,000  
lbs.)  
僅 Smartstream G2.5 T-GDi  
- Without trailer brakes: 750 kg  
(1,653 lbs.)  
5. Determine the combined weight of  
luggage and cargo being loaded on  
the vehicle. That weight may not  
safely exceed the available cargo and  
luggage load capacity calculated in  
Step 4.  
5
- With trailer brakes: 907 kg (2,000  
lbs.)  
6. If your vehicle will be towing a trailer,  
load from your trailer will be trans  
-
ferred to your vehicle. Consult this  
manual to determine how this  
- With trailer package: 1,588 kg  
(3,500 lbs.)  
Towing capacity is the maximum trailer  
weight including its cargo weight your  
vehicle can tow.  
reduces the available cargo and lug  
-
gage load capacity of your vehicle.  
WARNING  
Loose cargo  
Do not travel with unsecured blunt  
objects in the passenger compartment  
of your vehicle (e.g., suit cases or unse  
cured child seats). These items may  
strike an occupant during a sudden stop  
or crash.  
Cargo capacity:  
The cargo capacity of your vehicle will  
increase or decrease depending on the  
weight and the number of occupants.  
-
Steps For Determining Correct  
Load Limit -  
1. Locate the statement "The combined  
weight of occupants and cargo should  
never exceed XXX lbs. or XXX kg'' on  
your vehicle's placard.  
2. Determine the combined weight of  
the driver and passengers that will be  
riding in your vehicle.  
5
199  
Driving your vehicle  
Vehicle load limit  
Example 1  
Item  
Description  
Total  
Subtract Occupant  
Weight  
68 kg (150 lbs.)×5  
340 kg  
(750 lbs.)  
B
45 kg  
(99 lbs.)  
Available Cargo and  
Luggage weight  
C
Example 3  
ODEEV078137NR  
Item  
Description  
Total  
385 kg  
(849 lbs.)  
Vehicle Capacity  
Weight  
A
Subtract Occupant  
Weight  
68 kg (150 lbs.)×2  
136 kg  
(300 lbs.)  
B
C
ODEEV078139NR  
249 kg  
(549 lbs.)  
Available Cargo and  
Luggage weight  
Item  
Description  
Total  
385 kg  
(849 lbs.)  
Vehicle Capacity  
Weight  
A
Example 2  
Subtract Occupant  
Weight  
73 kg (161 lbs.)×5  
365 kg  
(805 lbs.)  
B
C
20 kg  
(44 lbs.)  
Available Cargo and  
Luggage weight  
Refer to your vehicle's tire and loading  
information label for specific information  
about your vehicle's capacity weight and  
seating positions. The combined weight  
of the driver, passengers and cargo  
should never exceed your vehicle's  
capacity weight.  
ODEEV078138NR  
Item  
Description  
Total  
Certification label  
The certification label is located on the  
driver's door sill at the center pillar.  
385 kg  
(849 lbs.)  
Vehicle Capacity  
Weight  
A
5
200  
Driving your vehicle  
Vehicle load limit  
This label shows the maximum allowable  
weight of the fully loaded vehicle. This is  
called the GVWR (Gross Vehicle Weight  
Rating). The GVWR includes the weight  
of the vehicle, all occupants and cargo.  
This label also tells you the maximum  
weight that can be supported by the  
front and rear axles, called Gross Axle  
Weight Rating (GAWR).  
NOTICE  
Overloading your vehicle may cause  
damage. Repairs would not be covered  
by your warranty. Do not overload your  
vehicle.  
To find out the actual loads on your front  
and rear axles, you need to go to a  
weigh station and weigh your vehicle.  
Your dealer can help you with this. Be  
sure to spread out your load equally on  
both sides of the centerline.  
WARNING  
Over loading  
Never exceed the GVWR for your vehi  
cle, the GAWR for either the front or rear  
axle and vehicle capacity weight.  
-
5
Exceeding these ratings can affect your  
vehicle's handling and braking ability.  
The label will help you decide how much  
cargo and installed equipment your  
vehicle can carry.  
If you carry items inside your vehicle -  
like suitcases, tools, packages, or any  
-
thing else - they are moving as fast as  
the vehicle. If you have to stop or turn  
quickly, or if there is a crash, the items  
will keep going and can cause an injury  
if they strike the driver or a passenger.  
WARNING  
Over loading  
Do not overload your vehicle. Overload  
ing your vehicle can cause heat buildup  
in your vehicle's tires and possible tire  
failure, increased stopping distances  
and poor vehicle handling--all of which  
may result in a crash.  
-
5
201  
Driving your vehicle  
Vehicle weight  
GVWR (Gross vehicle weight rat  
ing)  
This is the maximum allowable weight of  
the fully loaded vehicle (including all  
options, equipment, passengers and  
cargo). The GVWR is shown on the certi  
fication label located on the driver's (or  
front passenger's) door sill.  
-
Vehicle weight  
This section will guide you in the proper  
loading of your vehicle, to keep your  
loaded vehicle weight within its design  
rating capability. Properly loading your  
vehicle will provide maximum return of  
the vehicle design performance. Before  
loading your vehicle, familiarize yourself  
with the following terms for determining  
your vehicle's weight ratings, from the  
-
Overloading  
vehicle's specifications and the certifica  
tion label:  
-
WARNING  
Vehicle weight  
The gross axle weight rating (GAWR)  
and the gross vehicle weight rating  
(GVWR) for your vehicle are on the certi  
fication label attached to the driver's (or  
Base curb weight  
This is the weight of the vehicle includ  
-
-
ing a full tank of fuel and all standard  
equipment. It does not include passen  
gers, cargo, or optional equipment.  
-
front passenger's) door. Exceeding these  
ratings can cause an accident or vehicle  
damage. You can calculate the weight of  
your load by weighing the items (and  
Vehicle curb weight  
This is the weight of your new vehicle  
when you picked it up from your dealer  
plus any aftermarket equipment.  
people) before putting them in the vehi  
-
cle. Be careful not to overload your vehi  
-
cle.  
Cargo weight  
This figure includes all weight added to  
the Base Curb Weight, including cargo  
and optional equipment.  
Overloading  
WARNING  
The Gross Axle Weight Rating (GAWR)  
and the Gross Vehicle Weight Rating  
(GVWR) for your vehicle are on the Cer  
tification Label attached to the driver's  
(or front passenger's) door. Exceeding  
these ratings can cause an accident or  
vehicle damage. You can calculate the  
weight of your load by weighing the  
GAW (Gross axle weight)  
This is the total weight placed on each  
axle (front and rear) - including vehicle  
curb weight and all payload.  
-
GAWR (Gross axle weight rating)  
This is the maximum allowable weight  
that can be carried by a single axle (front  
or rear). These numbers are shown on  
the certification label.  
items (and people) before putting them  
in the vehicle. Be careful not to overload  
your vehicle  
The total load on each axle must never  
exceed its GAWR.  
GVW (Gross vehicle weight)  
This is the Base Curb Weight plus actual  
Cargo Weight plus passengers.  
5
202  

Related Topics