Driving your vehicle
Blind-Spot View Monitor (BVM)
Detecting sensor
Blind-Spot View Monitor Settings
Blind-Spot View
360° camera monitoring system-side
view camera
OMQ4051247R
OMQ4AH050340
(camera located at bottom of the mirror)
Refer to the picture above for the
僅 With the ENGINE START/STOP button
in the ON position, select 'Driver Assis
tance → Blind-Spot Safety → Blind
Spot View' from the Settings menu to
turn on Blind-Spot View Monitor and
deselect to turn off the function.
-
detailed location of the detecting sen
-
sors.
WARNING
The image shown on the cluster may dif
fer from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
-
Blind-Spot View Monitor Opera
tion
-
Operating conditions
僅 ENGINE START/STOP button is in the
ON position
CAUTION
If the camera lens is covered with for
eign material, Blind-Spot View Monitor
may not operate normally. Always keep
the camera lens clean.
However, do not use chemical solvents
such as strong detergents containing
high alkaline or volatile organic solvents
(gasoline, acetone etc.). This may dam
age the camera lens.
-
僅 Turn signal is ON
Off conditions
僅 ENGINE START/STOP button is in the
OFF position
僅 Turn signal is OFF
僅 Hazard warning flasher is ON
僅 Other warnings pops up and takes
-
priority over the Blind-Spot View Mon
itor
-
5
130
