Features of your vehicle -> Automatic climate control system for Your Kia Sorento SUV 2023

Features of your vehicle  
Automatic climate control system  
Automatic climate control system (if equipped)  
The automatic climate control system uses cooling and heating to help maintain a  
pleasant environment inside the vehicle.  
Type A  
OMQ4040313L  
Type B  
OMQ4040314L  
4
146  
Features of your vehicle  
Automatic climate control system  
3rd row seat  
OMQ4040302L  
1. Driver's temperature control button  
2. Passenger's temperature control button  
3. AUTO (automatic control) button  
4. OFF button  
4
5. Fan speed control button  
6. Mode selection button  
7. Front windshield defroster button  
8. Rear window defroster button  
9. SYNC button  
10.Air intake control button  
11.Air conditioning (A/C) button  
12.3rd row air conditioning ON/OFF button (if equipped)  
13.3rd row air conditioning fan speed control knob (if equipped)  
14.Climate control display  
NOTICE  
Operating the blower when the ignition  
switch or ENGINE START/STOP button is  
in the ON position could cause the bat  
tery to discharge. Operate the blower  
when the engine is running.  
-
4
147  
Features of your vehicle  
Automatic climate control system  
Heating and air conditioning  
automatically  
Automatic climate control system but  
-
tons are touch sensitive, and must be  
touched in the center of the button, for  
proper activation.  
1. Press the AUTO button.  
The modes, fan speeds, air intake and  
air-conditioning will be controlled  
automatically by setting the tempera  
-
ture.  
OMQ4040351L  
NOTICE  
僅 To turn the automatic operation off,  
select any button or switch of the fol  
lowing:  
-
- Mode selection button  
- Air conditioning button  
- Front windshield defroster button  
(Press the button one more time to  
deselect the front windshield  
defroster function. The AUTO sign  
will illuminate on the information  
display once again.)  
OMQ4040350L  
Level  
High  
Indicator  
LCD Display  
Air flow  
- Fan speed control knob  
The selected function will be con  
-
2~8  
1~7  
1~5  
trolled manually while other functions  
operate automatically.  
Medium  
Low  
僅 For your convenience and to improve  
the effectiveness of the climate con  
-
trol, use the AUTO button and set the  
temperature to 22 °C (72 °F).  
2. Press the temperature control button  
to the desired temperature.  
NOTICE  
Never place anything over the sensor  
located on the instrument panel to  
ensure better control of the heating and  
cooling system.  
4
148  
Features of your vehicle  
Automatic climate control system  
OMQ4040068  
4
4
149  
Features of your vehicle  
Automatic climate control system  
Heating and air conditioning manually  
The heating and cooling system can be controlled manually by pressing buttons  
other than the AUTO button.  
OMQ4A031339  
In this case, the system works sequentially according to the order of buttons selected.  
1. Start the vehicle.  
2. Set the mode to the desired position.  
For improving the effectiveness of heating and cooling;  
僅 Heating:  
僅 Cooling:  
3. Set the temperature control to the desired position.  
4. Set the air intake control to the outside (fresh) air position.  
5. Set the fan speed control to the desired speed.  
If air conditioning is desired, turn the air conditioning system on.  
Press the AUTO button in order to convert to fully automatic control of the system.  
4
150  
Features of your vehicle  
Automatic climate control system  
Mode selection  
The mode selection button controls the  
direction of the air flow through the ven  
tilation system.  
Defrost-Level (A, D)  
Most of the air flow is directed to the  
windshield with a small amount of air  
directed to the side window defrosters  
and side air vents.  
-
Instrument panel vents  
Front  
4
OMQ4040319L  
The air flow outlet ports are switched in  
the following sequence:  
OMQ4041336L  
Face-Level (B, D, H)  
Center console  
Air flow is directed toward the upper  
body and face. Additionally, each outlet  
can be controlled to direct the air dis  
charged from the outlet.  
-
Bi-Level (B, C, D, E, F, H)  
Air flow is directed towards the face and  
the floor.  
Floor-Level (A, C, D, E, F, H)  
Most of the air flow is directed to the  
floor, with a small amount of the air  
being directed to the windshield, side  
window defrosters and side air vents.  
OMQ4040335  
Floor/Defrost-Level (A, C, D, E, F,  
H)  
Most of the air flow is directed to the  
floor and the windshield with a small  
amount directed to the side window  
defrosters and side air vents.  
4
151  
Features of your vehicle  
Automatic climate control system  
Rear  
NOTICE  
When starting the vehicle in cold  
weather using manual temperature con  
trol, operate the system in the following  
method to improve heating:  
-
僅 Turn off or lower the blower, right  
after starting the engine.  
僅 Allow the engine to warm up during  
this time since the air flow from the  
heater is still cold.  
僅 After a few minutes of engine warm  
up, turn on or set the fan to a higher  
OMQ4A030337  
level and adjust the temperature set  
-
You can adjust the direction of air deliv  
ered from these vents using the vent  
control lever as shown.  
-
ting to hot.  
Adjusting the driver and passen  
-
Temperature control  
ger side temperature equally  
Type A  
OMQ4040321  
The temperature will increase to the  
maximum (HI) by moving the switch  
upwards.  
OMQ4040322L  
The temperature will decrease to the  
minimum (Lo) by moving the switch  
downwards.  
When moving the switch, the tempera  
-
ture will increase or decrease by 0.5 °F.  
When set to the lowest temperature set  
ting, the air conditioning will operate  
continuously.  
-
4
152  
Features of your vehicle  
Automatic climate control system  
Type B  
Centigrade. If the battery has been dis-  
charged or disconnected, the tempera  
ture mode display will reset to  
Centigrade.  
-
Controlling air intake  
This is used to select the outside (fresh)  
air position or recirculated air position.  
Type A  
Type B  
OMQ4040322  
1. Press the "SYNC" button to adjust the  
To change the air intake control position:  
僅 Push the desired control button.  
driver and passenger side tempera  
-
4
ture equally.  
The passenger side temperature will  
be set to the same temperature as the  
driver side temperature.  
Recirculated air position  
With the recirculated air  
position selected, air from  
the passenger compartment  
will be drawn through the  
heating system and heated  
or cooled according to the function  
selected.  
2. Move the driver side temperature  
control switch. The driver and passen  
ger side temperature will be adjusted  
equally.  
-
3. If you move the passenger's tempera  
-
ture control switch, the SYNC button  
is off and the passenger side tem  
-
Outside (fresh) air position  
perature can be operated individually.  
Type A  
Type B  
Adjusting the driver and passen  
-
ger side temperature individually  
Press the "SYNC" button again to adjust  
the driver and passenger side tempera  
ture individually. The button indicator  
will turn off.  
-
The indicator light on the button will turn  
ON or OFF when the outside (fresh) air  
position is selected.  
Changing temperature scale  
You can switch the temperature mode  
With the outside (fresh) air position  
selected, air enters the vehicle from out  
side and is heated or cooled according  
to the function selected.  
-
from Centigrade to Fahrenheit as fol  
lows:  
-
僅 While pressing the OFF button, press  
the AUTO button for 3 seconds or  
more.  
The display will change from Centigrade  
to Fahrenheit, or from Fahrenheit to  
NOTICE  
Prolonged operation of the heater in the  
recirculated air position (without air con  
-
4
153  
Features of your vehicle  
Automatic climate control system  
ditioning selected) may cause fogging of  
the windshield and side windows and  
Type A  
the air within the passenger compart  
-
ment may become stale.  
In addition, prolonged use of the air con  
-
ditioning with the recirculated air posi  
-
tion selected will result in excessively dry  
air, musty/stale smells and/or odors in  
the passenger compartment.  
WARNING  
僅 Continued climate control system  
OMQ4040327L  
operation in the recirculated air posi  
-
Type B  
tion may allow humidity to increase  
inside the vehicle which may fog the  
glass and obscure visibility.  
僅 Do not sleep in a vehicle with the air  
conditioning or heating system on. It  
may cause serious harm or death due  
to a drop in the oxygen level and/or  
body temperature.  
僅 Continued climate control system  
operation in the recirculated air posi  
-
tion can cause drowsiness or sleepi  
-
ness, and loss of vehicle control. Set  
the air intake control to the outside  
(fresh) air position as much as possi  
ble while driving.  
OMQ4040327  
To turn the fan speed control off:  
僅 Press the OFF button.  
-
Air conditioning (A/C)  
Controlling fan speed  
The fan speed can be set to the desired  
speed by operating the fan speed con  
trol button.  
-
To change the fan speed:  
僅 Press right button for higher speed, or  
press left button for lower speed.  
OMQ4040328L  
4
154  
Features of your vehicle  
Automatic climate control system  
僅 Press the A/C button to turn the air  
conditioning system on (indicator light  
will illuminate).  
3rd row air conditioning (if  
equipped)  
僅 Press the button again to turn the air  
conditioning system off.  
Turning off the front air climate  
control  
OMQ4H040306L  
To turn on the 3rd row air conditioning  
control system.  
4
1. You can operate the third row air con  
ditioning system from the first row  
control panel. Changing the front  
-
OMQ4040329  
row's fan speed by pressing the con  
-
僅 Press the OFF button to turn off the  
air climate control system.  
However, you can still operate the  
mode and air intake buttons as long  
as the ENGINE START/STOP button is  
in the ON position.  
trol button will automatically change  
the third row's fan speed as well.  
When the front row air conditioning  
has been turned off and you want to  
stop the A/C in the third row, press  
the third row air conditioning select  
button one more time. Then, the third  
row's A/C will also turn off.  
Clean air (if equipped)  
When the ignition switch or ENGINE  
2. The third row A/C system can be sep  
-
START/STOP button is in the ON posi  
-
arately controlled by the control but  
-
tion, the clean air function turns on auto  
-
tons in the third row. When the A/C is  
ON or OFF, the third row A/C control  
button in the front row will turn ON or  
OFF, informing the front passengers  
of the situation.  
matically.  
Also, the clean air function turns off  
automatically, when the ignition switch  
or ENGINE START/STOP button is in the  
OFF position.  
3. The fan speed of the third row air con  
-
ditioning can also be separately con  
trolled by turning the fan speed  
control knob.  
-
4
155