Features of your vehicle
Driver Position Memory System
ing the 1 button recalls the "1" memory
position.
Storing memory positions
1. The ignition switch or ENGINE START/
STOP button is in the ON position.
2. Adjust the driver's seat position, out
side rear view mirror position, instru
ment panel illumination intensity and
head-up display height/brightness to
the desired position.
僅 While recalling the stored positions,
pressing one of the control buttons
for the driver's seat, outside rear view
-
-
mirror, or instrument panel illumina
-
tion will cause the movement of that
component to stop and move in the
direction that the control button is
pressed.
3. Press the SET button. The system will
beep once and notify you "Press but
-
ton to save settings"on the LCD dis
-
Driver position memory system
reset
play.
4. Press one of the memory buttons (1 or
2) within 4 seconds. The system will
beep twice when the memory has
been successfully stored.
5. "Settings 1 (or 2) saved" will appear on
the LCD display.
If the Driver position memory system
does not work properly, initialize the sys
tem as follows.
-
4
How to initialize:
1. Stop the vehicle and open the driver's
door with the ignition switch or
ENGINE START/STOP button in the
ON position and the vehicle shifted to
P (Park).
Recalling memory positions
1. The ignition switch or ENGINE START/
STOP button is in the ON position.
2. Pull the driver's seat forward as far as
possible and have the seatback
upright as much as possible using the
driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat forward
movement switch for 2 seconds
simultaneously.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver's seat position, outside
rear view mirror position, instrument
panel illumination intensity and head-
up display height/brightness will auto
-
matically adjust to the stored posi
-
tions.
3. "Settings 1 (or 2) applied" will appear
on the LCD display.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will automati
cally move backwards. The alarm
sound will continue while the system
is in operation.
僅 While recalling the "1" memory posi
-
tion, pressing the SET or 1 button tem
porarily stops the adjustment of the
recalled memory position. Pressing
the 2 button recalls the "2" memory
position.
-
-
僅 While recalling the "2" memory posi
-
3. Initialization will be complete after the
seat and seatback move to the center
with an alarm sound. If, however,
tion, pressing the SET or 2 button
temporarily stops the adjustment of
the recalled memory position. Press
-
cases as follows occur, the initializa-
4
27
