Safety features of your vehicle -> Seat belts for Your Kia Sorento SUV 2023

Safety features of your vehicle  
Seat belts  
Seat belts  
Seat belts are designed to bear upon the  
bony structure of the body, and should  
be worn low across the front of the pel  
-
vis, chest and shoulders.  
Seat belt restraint system  
For maximum restraint system protec  
-
tion, the seat belts must always be used  
whenever the vehicle is moving.  
僅 A properly positioned shoulder belt  
should be positioned midway over  
your shoulder, across your collarbone.  
僅 Never allow children to ride in the  
front passenger seat. See "Child  
Restraint System (CRS)" on page 3-30  
for further discussion.  
3
OMQ4030027  
WARNING  
Seatback pockets  
Do not put heavy or sharp objects in the  
seatback pockets. In an accident they  
could come loose from the pocket and  
injure vehicle occupants.  
WARNING  
Twisted seat belt  
Small pocket (for 6 passenger  
vehicle) (if equipped)  
There is a small pocket in the 2nd row  
seat cushion for storing simple objects.  
Make sure your seat belt is not twisted  
when worn. A twisted seat belt may not  
properly protect you in an accident and  
could even cut into your body.  
WARNING  
Shoulder belt  
僅 Never wear the shoulder belt under  
your arm or behind your back. An  
improperly positioned shoulder belt  
cannot protect the occupant in the  
event of a crash.  
僅 Always wear both the shoulder por  
-
tion and lap portion of the lap/shoul  
-
der belt.  
OMQ4AH030089  
WARNING  
Damaged seat belt  
Any damage in webbing or hardware  
may lead to serious injury or death in a  
crash. For your safety, replace the entire  
3
21  
Safety features of your vehicle  
Seat belts  
seat belt assembly when any part of the  
webbing or hardware is damaged.  
over objects that are hard or can  
break easily.  
WARNING  
Seat belt buckle  
Do not allow foreign material (gum,  
crumbs, coins, liquids, etc.) to obstruct  
the seat belt buckle. This may prevent  
the seat belt from fastening securely.  
Seat belts are designed to bear upon the  
bony structure of the body, and should  
be worn low across the front of the pel  
-
vis, chest and shoulders, as applicable;  
wearing the lap section of the belt across  
the abdominal area must be avoided.  
Seat belts should be adjusted as firmly  
as possible, consistent with comfort, to  
provide the protection for which they  
have been designed.  
Seat belt warning  
A slack belt will greatly reduce the pro  
-
tection afforded to the wearer.  
Care should be taken to avoid contami  
-
nation of the webbing with polishes, oils  
and chemicals, and particularly battery  
acid. Cleaning may safely be carried out  
using mild soap and water. The belt  
should be replaced if webbing becomes  
frayed, contaminated or damaged.  
僅 No modifications or additions should  
be made by the user which would  
either prevent the seat belt adjusting  
devices from operating to remove  
The seat belt warning light and warning  
chime operate under the following con  
ditions.  
-
Driver's seat belt warning  
As a reminder to the driver, the seat belt  
warning light will illuminate for approxi  
-
mately 6 seconds each time you turn the  
ignition switch or ENGINE START/STOP  
button ON regardless of belt fastening. If  
the seatbelt is not fastened, the warning  
chime will sound for about 6 seconds.  
slack, or prevent the seat belt assem  
bly from being adjusted to remove  
slack.  
-
If you start to drive without the seat belt  
fastened over approximately 9 km/h (5  
mph) and less than approximately 20  
km/h (12 mph), the corresponding warn  
ing light will illuminate. The warning light  
will turn off when the vehicle speed  
drops below approximately 9 km/h (5  
mph).  
僅 When you fasten the seat belt, be  
careful not to latch the seat belt in  
buckles of other seats. It is very dan  
-
-
gerous and you may not be protected  
by the seat belt properly.  
僅 Do not unfasten the seat belt and do  
not fasten and unfasten the seat belt  
repeatedly while driving. This could  
result in loss of control, and an acci  
dent causing death, serious injury, or  
property damage.  
僅 When fastening the seat belt, make  
sure that the seat belt does not pass  
If you start to drive without the seat belt  
fastened or you unfasten the seat belt  
when you drive approximately 20 km/h  
(12 mph) and faster, the warning light  
will blink and warning chime will sound  
for approximately 100 seconds. When  
-
the seat belt is unfastened during driv  
-
3
22  
Safety features of your vehicle  
Seat belts  
ing, the warning light will illuminate  
will illuminate for approximately 6  
when the speed is over approximately 9  
seconds.  
km/h (5mph) and less than approxi  
-
僅 The front passenger's seat belt warn  
ing may operate when luggage is  
placed on the front passenger seat.  
-
mately 20 km/h (12 mph). When the  
speed is approximately 20 km/h (12  
mph) and faster, the warning light will  
blink and warning chime will sound for  
approximately 100 seconds.  
Seat belt - Driver's 3-point system  
with emergency locking retractor  
Fastening the seat belt  
Front passenger's seat belt warn  
ing  
As a reminder to the front passenger,  
-
3
the seat belt warning light will illuminate  
for approximately 6 seconds each time  
you turn the ignition switch or ENGINE  
START/STOP button ON regardless of  
belt fastening. If you start to drive with  
out the passenger seat belt fastened  
when you drive over approximately 9  
-
km/h (5 mph) and less than approxi  
mately 20 km/h (12 mph), the corre  
sponding warning light will illuminate.  
-
-
ODEEV058025NR  
僅 To fasten your seat belt, pull it out of  
the retractor and insert the metal tab  
(1) into the buckle (2). There will be an  
audible "click" when the tab locks into  
the buckle.  
The warning light will turn off when the  
vehicle speed drops approximately  
below 9 km/h (5 mph).  
If you start to drive without the passen  
-
ger seat belt fastened or you unfasten  
The seat belt automatically adjusts to  
the proper length only after the lap belt  
portion is adjusted manually so that it  
fits snugly around your hips. If you lean  
forward in a slow, easy motion, the belt  
will extend and let you move around. If  
the seat belt when you drive approxi  
-
mately 20 km/h (12 mph) and faster, the  
warning light will blink and warning  
chime will sound for approximately 100  
seconds. When the passenger seat belt  
is unfastened during driving, the warn  
-
there is a sudden stop or impact, how  
-
ing light will illuminate when the speed is  
over approximately 9 km/h (5mph) and  
less than approximately 20 km/h (12  
mph). When the speed is approximately  
ever, the belt will lock into position. It will  
also lock if you try to lean forward too  
quickly.  
20 km/h (12 mph) and faster, the warn  
-
WARNING  
ing light will blink and warning chime will  
sound for approximately 100 seconds.  
You should place the lap belt portion as  
low as possible and snugly across your  
hips. If the lap belt is located too high on  
your waist, it may increase the chance of  
injury in the event of a collision.  
NOTICE  
僅 Even if the front passenger seat is not  
occupied, the seat belt warning light  
3
23  
Safety features of your vehicle  
Seat belts  
If this does not happen, check the belt to  
be sure it is not twisted, then try again.  
Adjusting the height of shoulder  
belt  
You can adjust the height of the shoul  
-
der belt anchor to one of 4 positions for  
maximum comfort and safety.  
ODEEV058026NR  
The arm closest to the seat belt buckle  
should be over the belt while the other  
arm should be under the belt as shown  
in the illustration. Never wear the seat  
belt under the arm closest to the door.  
NOTICE  
ODEEV058027NR  
If you are not able to pull out the seat  
belt from the retractor, firmly pull the  
belt out and release it. Then you will be  
able to pull the belt out smoothly.  
The height of the adjusting seat belt  
should not be too close to your neck.  
You will not be getting the most effective  
protection. The shoulder portion should  
be adjusted so that it lies across your  
chest and midway over your shoulder  
near the door and not your neck.  
Releasing the seat belt  
To adjust the height of the seat belt  
anchor, lower or raise the height  
adjuster into an appropriate position.  
僅 To raise the height adjuster, pull it up  
(1).  
僅 To lower it, push it down (3) while  
pressing the height adjuster button  
(2).  
Release the button to lock the anchor  
into position. Try sliding the height  
adjuster to make sure that it has locked  
into position.  
Improperly positioned seat belts can  
cause serious injuries in an accident.  
ODEEV058078NR  
僅 Press the release button (1) in the  
locking buckle.  
When it is released, the belt should auto  
matically draw back into the retractor.  
-
3
24  
Safety features of your vehicle  
Seat belts  
3rd row seat  
WARNING  
Shoulder belt positioning  
Verify the shoulder belt anchor is locked  
into position at the appropriate height.  
Never position the shoulder belt across  
your neck or face. Improperly positioned  
seat belts can cause serious injuries in  
an accident.  
WARNING  
Seat belt replacement  
After a collision, the seat belt system  
should be inspected to ensure it is oper  
ating normally. Replace any belts that  
are not functioning appropriately.  
3
OMQ4A030070  
1. Rear right seat belt fastening buckle  
2. Rear left seat belt fastening buckle  
-
-
WARNING  
Prior to fastening the rear seat belts,  
ensure the latch matches the seat belt  
buckle. Forcefully fastening the left or  
right seat belt to the center buckle can  
result in an improper fastening scenario  
that will not protect you in an accident.  
The seat belt should be locked into the  
buckle on each seat cushion to be prop  
erly fastened.  
2nd row seat (7 passenger vehicle)  
Stowing the rear seat belt  
The rear seat belt buckles can be stowed  
in the pocket between the rear seatback  
and cushion when not in use.  
2nd row seat (for 7 passenger vehicle)  
OMQ4030070  
1. Rear right seat belt fastening buckle  
2. Rear center seat belt fastening buckle  
3. Rear left seat belt fastening buckle  
OMQ4A030071  
3
25  
Safety features of your vehicle  
Seat belts  
2nd row seat (for 6 passenger vehicle)  
Pre-tensioner seat belt  
OMQ4A030343  
OON038092NR  
3rd row seat  
Your vehicle is equipped with driver's  
and front passenger's pre-tensioner seat  
belts.  
The purpose of the pre-tensioner is to  
make sure that the seat belts fit tightly  
against the occupant's body in certain  
collisions.  
The pre-tensioner seat belts may be  
activated in crashes where the collision  
is severe enough.  
When the vehicle stops suddenly, or if  
the occupant tries to lean forward too  
quickly, the seat belt retractor will lock  
into position. In certain frontal collisions,  
the pre-tensioner will activate and pull  
the seat belt into tighter contact against  
the occupant's body.  
OMQ4A030072  
1. Route the seat belt webbing through  
the rear seat belt guides. It will help  
keep the belts from being trapped  
behind or under the seats.  
2. After inserting the seat belt, tighten  
the belt webbing by pulling it up.  
If the system senses excessive tension  
on the driver or passenger's seat belt  
when the pre-tensioner system acti  
-
CAUTION  
vates, the load limiter inside the retractor  
pre-tensioner will release some of the  
pressure on the affected seat belt.  
When pulling out to wear the seat belt,  
the tongue should be slowly pulled out  
of the seat belt guide so that the seat  
belt guide does not come off the trim.  
WARNING  
For your safety, be sure that the belt  
webbing is not loose or twisted and  
always sit properly on your seat.  
3
26  
Safety features of your vehicle  
Seat belts  
cle is equipped with a side or curtain  
air bag.  
僅 Because the sensor that activates the  
SRS air bag is connected with the pre-  
tensioner seat belt, the SRS air bag  
NOTICE  
The pre-tensioner may activate not only  
in a frontal collision but also in a side col  
lision, if the vehicle is equipped with a  
side or curtain air bag.  
-
warning light  
on the instrument  
The seat belt pre-tensioner system con  
-
panel will illuminate for approximately  
3 ~ 6 seconds after the ignition switch  
or ENGINE START/STOP button has  
been turned to the ON position, and  
then it should turn off.  
sists mainly of the following compo  
-
nents. Their locations are shown in the  
illustration:  
3
僅 If the pre-tensioner seat belt system is  
not working properly, this warning  
light will illuminate even if there is not  
a malfunction with the SRS air bag. If  
the SRS air bag warning light does not  
illuminate when the ignition switch or  
ENGINE START/STOP button has  
been turned to the ON position, or if it  
remains illuminated after illuminating  
for approximately 3 ~ 6 seconds, or if  
it illuminates while the vehicle is being  
driven, have an authorized Kia dealer  
inspect the pre-tensioner seat belt  
and SRS air bag system as soon as  
possible.  
OON039121NR  
1. SRS air bag warning light  
2. Front retractor pre-tensioner assem  
-
bly  
3. SRS control module  
WARNING  
NOTICE  
Skin irritation  
Wash all exposed skin areas thoroughly  
after an accident in which the pre-ten  
sioner seat belts were activated. The fine  
dust from the pre-tensioner activation  
may cause skin irritation and should not  
be inhaled for prolonged periods.  
Do not attempt to service or repair the  
pre-tensioner seat belt system in any  
manner. Do not attempt to inspect or  
replace the pre-tensioner seat belts  
yourself. This must be done by an  
authorized Kia dealer.  
-
WARNING  
Hot pre-tensioner  
NOTICE  
僅 Both the driver's and front passen  
-
Do not touch the pre-tensioner seat belt  
assemblies for several minutes after  
they have been activated. When the pre-  
tensioner seat belt mechanism fires  
ger's seat belt pre-tensioner systems  
may be activated not only in certain  
frontal collisions, but also in certain  
side collisions or rollovers, if the vehi  
-
3
27  
Safety features of your vehicle  
Seat belts  
during a collision the pre-tensioner  
becomes hot and can burn you.  
shoulder belts. The lap portion should be  
fastened and snug on the hips as low as  
possible. Check periodically to insure  
that the belt fits. A child's squirming  
could put the belt out of position. Chil  
dren are given the most safety in the  
event of an accident when they are  
restrained by a proper restraint system  
in the rear seat. If a larger child (over age  
13) must be seated in the front seat, the  
child should be securely restrained by  
the available lap/shoulder belt and the  
seat should be placed in the rearmost  
position. Children age 13 and under  
should be restrained securely in the rear  
seat. NEVER place a child age 13 and  
under in the front seat. NEVER place a  
rear facing child seat in the front seat of  
a vehicle.  
Pre-tensioners are designed to operate  
only one time. After activation, pre-ten  
sioner seat belts must be replaced. If the  
pre-tensioner must be replaced, contact  
an authorized Kia dealer.  
-
-
Seat belt precautions  
Take the following precautions when  
using seat belts.  
Infant or small child  
Most countries have child restraint laws.  
You should be aware of the specific  
requirements in your country. Child and/  
or infant seats must be properly placed  
and installed in the rear seat. For more  
information about the use of these  
If the shoulder belt portion slightly  
touches the child's neck or face, try plac  
ing the child closer to the center of the  
vehicle. If the shoulder belt still touches  
their face or neck they need to be  
-
restraints, refer to "Child Restraint Sys  
tem (CRS)" on page 3-30.  
-
NOTICE  
returned to a Child Restraint System.  
Small children are best protected from  
injury in an accident when properly  
restrained in the rear seat by a Child  
Restraint System that meets the require  
ments of the Safety Standards of your  
country. Before buying any Child  
WARNING  
Small children  
-
Do not allow small children to ride in the  
vehicle without an appropriate Child  
Restraint System. If the shoulder belt  
comes in contact with your child's neck  
or face, your child is too small to ride in  
the vehicle. In a crash, the seat belt will  
inflict injury to your child's neck, throat  
and face.  
Restraint System, make sure that it has a  
label certifying that it meets Safety Stan  
dards of your country. The restraint  
must be appropriate for your child's  
height and weight. Check the label on  
the child restraint for this information.  
Refer to "Child Restraint System (CRS)"  
on page 3-30.  
-
Restraint of pregnant women  
Pregnant women should wear lap/shoul  
der belt assemblies whenever possible  
according to specific recommendations  
by their doctors. The lap portion of the  
-
Larger children  
Children who are too large for Child  
Restraint System should always occupy  
the rear seat and use the available lap/  
3
28  
Safety features of your vehicle  
Seat belts  
belt should be worn AS SECURELY AND  
LOW AS POSSIBLE.  
WARNING  
Pinched seat belt  
WARNING  
Pregnant women  
Pregnant women must never place the  
lap portion of the seat belt above or on  
the abdomen where the fetus is located.  
Make sure that the webbing and/or  
buckle does not get caught or pinched in  
the rear seat when returning the rear  
seatback to its upright position. A caught  
or pinched webbing/buckle may  
become damaged and could fail during  
a collision or sudden stop.  
The force of the seat belt during a colli  
-
sion will crush the fetus.  
3
WARNING  
Injured person  
A seat belt should be used when an  
injured person is being transported.  
When this is necessary, you should con  
sult a physician for recommendations.  
Seatbelts can become hot in a vehicle  
that has been closed up in sunny  
weather. Please handle with care, as  
they could burn infants and children, if  
used abruptly.  
-
One person per belt  
Two people (including children) should  
never attempt to use a single seat belt.  
This could increase the severity of inju  
ries in case of an accident.  
Periodic inspection  
All seat belts should be inspected peri  
-
odically for wear or damage of any kind.  
Any damaged parts should be replaced  
as soon as possible.  
-
Do not lie down  
To reduce the chance of injuries in the  
event of an accident and to achieve  
Keep belts clean and dry  
Seat belts should be kept clean and dry.  
If belts become dirty, they can be  
cleaned by using a mild soap solution  
and warm water. Bleach, dye, strong  
detergents or abrasives should not be  
used because they may damage and  
weaken the fabric.  
maximum effectiveness of the restraint  
system, all passengers should be sitting  
up and the front and rear seats should  
be in an upright position when the vehi  
-
cle is moving. A seat belt cannot provide  
proper protection if the person is lying  
down in the rear seat or if the front and  
rear seats are in a reclined position.  
When to replace seat belts  
The entire in-use seat belt assembly or  
assemblies should be replaced if the  
vehicle has been involved in an accident.  
This should be done even if no damage  
is visible. Additional questions concern  
ing seat belt operation should be  
directed to an authorized Kia dealer.  
Care of seat belts  
Seat belt systems should never be disas  
sembled or modified. In addition, care  
should be taken to assure that seat belts  
and belt hardware are not damaged by  
seat hinges, doors or other abuse.  
-
-
3
29