Features of your vehicle -> Automatic climate control system for Your Kia Sportage SUV 2020

Features of your vehicle  
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)  
Type A  
1. Driver’s temperature control knob  
2. AUTO (automatic control) button  
3. Front windshield defroster button  
4. Rear window defroster button  
5. Air conditioning button  
6. Air intake control button  
7. OFF button  
8. Fan speed control button  
9. Mode selection button  
10. Passenger's temperature control knob  
11. SYNC temperature control selection but-  
ton  
Type B  
12. Climate control display  
13. Climate information screen selection button  
NOTICE  
Operating the blower when the  
ignition switch is in the ON posi-  
tion could cause the battery to dis-  
charge. Operate the blower when  
the engine is running.  
OQL048301/OQL048329L  
4 154  
Features of your vehicle  
Driver’s side  
Passenger’s side  
Automatic heating and air con-  
ditioning  
NOTICE  
To turn the automatic operation  
off, select any button or switch of  
the following:  
- Mode selection button  
- Air conditioning button  
- Front windshield defroster button  
(Press the button one more time  
to deselect the front windshield  
defroster function. The ‘AUTO’  
sign will illuminate on the infor-  
mation display once again.)  
OQL048315L  
- Air intake control button  
2. Turn the temperature control knob  
to the desired temperature.  
- Fan speed control switch  
OQL048311L  
The selected function will be con-  
trolled manually while other func-  
tions operate automatically.  
• For your convenience and to  
improve the effectiveness of the  
climate control, use the AUTO  
button and set the temperature to  
23°C (73°F).  
1. Press the AUTO button. The  
modes, fan speeds, air intake and  
air-conditioning will be controlled  
automatically by setting the tem-  
perature.  
4 155  
Features of your vehicle  
Mode selection  
Manual heating and air condi-  
tioning  
The heating and cooling system can  
be controlled manually by pressing  
buttons or turning knob(s) other than  
the AUTO button. In this case, the  
system works sequentially according  
to the order of buttons or knob(s)  
selected.  
1. Start the engine.  
2. Set the mode to the desired posi-  
tion.  
OQL048312  
NOTICE  
OQL048313L  
For improving the effectiveness of  
heating and cooling;  
- Heating:  
- Cooling:  
Never place anything over the sensor  
located on the instrument panel to  
ensure better control of the heating  
and cooling system.  
The mode selection button controls  
the direction of the air flow through  
the ventilation system.  
The air flow outlet port is converted  
as follows:  
3. Set the temperature control to the  
desired position.  
4. Set the air intake control to the  
outside (fresh) air position.  
5. Set the fan speed control to the  
desired speed.  
6. If air conditioning is desired, turn  
the air conditioning system on.  
Refer to the illustration in the  
“Manual climate control system”.  
Press the AUTO button in order to  
convert to full automatic control of  
the system.  
4 156  
Features of your vehicle  
Type A  
Face-Level  
Air flow is directed toward the upper  
body and face. Additionally, each  
outlet can be controlled to direct the  
air discharged from the outlet.  
Type B  
Bi-Level  
OQL048343L  
OQL048306L  
Air flow is directed towards the face  
and the floor.  
Defrost-Level  
Instrument panel vents  
Most of the air flow is directed to the The outlet vents can be opened or  
windshield with a small amount of air closed separately using the thumb-  
directed to the side window defrosters. wheel.  
Floor-Level  
Also, you can adjust the direction of  
air flow from these vents using the  
vent control lever as shown.  
Most of the air flow is directed to the  
floor, with a small amount of the air  
being directed to the windshield and  
side window defrosters.  
Floor/Defrost-Level  
Most of the air flow is directed to the  
floor and the windshield with a small  
amount directed to the side window  
defrosters.  
4 157  
Features of your vehicle  
Adjusting the driver and passenger  
side temperature individually  
Temperature control  
Driver’s side  
Passenger’s side  
• Press the “SYNC” button again to  
adjust the driver and passenger  
side temperature individually. The  
illumination of button turns off.  
• Operate the driver side tempera-  
ture control knob to adjust the driv-  
er side temperature.  
• Operate the passenger side tem-  
perature control knob to adjust the  
passenger side temperature.  
OQL048316L  
Adjusting the driver and passenger  
side temperature equally  
• Press the “SYNC” button to adjust  
the driver and passenger side tem-  
perature equally.  
The passenger side temperature  
will be set to the same temperature  
as the driver side temperature.  
Turn the driver side temperature  
control knob. The driver and pas-  
senger side temperature will be  
adjusted equally.  
OQL048315L  
The temperature will increase to the  
maximum (HI) by turning the knob to  
the extreme right.  
The temperature will decrease to the  
minimum (Lo) by turning the knob to  
the extreme left.  
Temperature conversion  
You can switch the temperature  
mode from Centigrade to Fahrenheit  
as follows:  
While pressing the OFF button,  
press the AUTO button for 3 seconds  
or more.  
The display will change from  
Centigrade to Fahrenheit, or from  
Fahrenheit to Centigrade.  
When turning the knob, the tempera-  
ture will increase or decrease by  
1°F/0.5°C. When set to the lowest  
temperature setting, the air condi-  
tioning will operate continuously.  
If the battery has been discharged or  
disconnected, the temperature mode  
display will reset to Fahrenheit.  
4 158  
Features of your vehicle  
Outside (fresh) air position  
With the outside (fresh)  
Air intake control  
Prolonged operation of the heater in  
the recirculated air position (without  
air conditioning selected) may cause  
fogging of the windshield and side  
windows and the air within the pas-  
senger compartment may become  
stale.  
air position selected, air  
enters the vehicle from  
outside and is heated or  
cooled according to the  
function selected.  
In addition, prolonged use of the air  
conditioning with the recirculated air  
position selected will result in exces-  
sively dry air in the passenger com-  
partment.  
Recirculated air position  
With the recirculated air  
position selected, air  
from the passenger  
compartment will be  
drawn through the heat-  
ing system and heated  
or cooled according to  
the function selected.  
OQL048317L  
Sunroof inside air recirculation  
(if equipped)  
This is used to select the outside  
(fresh) air position or recirculated air  
position.  
To change the air intake control posi-  
tion, push the control button.  
If the sunroof opens while the heater  
or Air Conditioning system operates,  
the outside (fresh) air will be select-  
ed automatically for ventilating the  
car. Then, if you select the recirculat-  
ed air position, the outside (fresh) air  
will be selected automatically after 3  
minutes.  
If you close the sunroof, the intake  
mode will be changed to the previous  
selected mode.  
4 159  
Features of your vehicle  
Fan speed control  
Air conditioning  
To change the fan speed, press (  
the button for higher speed, or push  
) the button for lower speed. To  
)
Type A  
Type A  
(
turn the fan speed control off, press  
the front blower OFF button.  
OQL045318  
OQL045319  
Type B  
Type B  
OQL045318L  
OQL045319L  
The fan speed can be set to the  
desired speed by operating the fan  
speed control button.  
Press the A/C button to turn the air  
conditioning system on (indicator  
light will illuminate).  
Press the button again to turn the air  
conditioning system off.  
4 160  
Features of your vehicle  
OFF mode  
WARNING - Reduced  
Visibility  
WARNING - Sleeping with  
A/C on  
Continuous use of the climate  
control system in the recirculat-  
ed air position may allow  
humidity to increase inside the  
vehicle which may fog the glass  
and obscure visibility.  
Do not sleep in a vehicle with  
the air conditioning or heating  
on as this may cause serious  
harm or death due to a drop in  
the oxygen level and/or body  
temperature.  
WARNING - Recirculated  
Air  
OQL048320L  
Continued use of the climate  
control system in the recirculat-  
ed air position can cause  
drowsiness or sleepiness, and  
loss of vehicle control. Set the  
air intake control to the outside  
(fresh) air position as much as  
possible while driving.  
Press the front blower OFF button to  
turn off the front air climate control  
system. However, you can still oper-  
ate the mode and air intake buttons  
as long as the ignition switch is in the  
ON position.  
4 161  
Features of your vehicle  
Operation Tips  
Climate information screen  
selection (if equipped)  
System operation  
To keep dust or unpleasant fumes  
from entering the vehicle through  
the ventilation system, temporarily  
set the air intake control to the  
recirculated air position. Be sure to  
return the control to the fresh air  
position when the irritation has  
passed to keep fresh air in the  
vehicle.This will help keep the driv-  
er alert and comfortable.  
Ventilation  
1.Set the mode to the  
2.Set the air intake control to the out-  
side (fresh) air position.  
3.Set the temperature control to the  
desired position.  
position.  
4.Set the fan speed control to the  
desired speed.  
• Air for the heating/cooling system  
is drawn in through the grilles just  
ahead of the windshield. Care  
should be taken that these are not  
blocked by leaves, snow, ice or  
other obstructions.  
To prevent interior fog on the wind-  
shield, set the air intake control to  
the fresh air position and fan speed  
to the desired position, turn on the  
air conditioning system, and adjust  
the temperature control to desired  
temperature.  
Heating  
1.Set the mode to the  
2.Set the air intake control to the out-  
side (fresh) air position.  
3.Set the temperature control to the  
desired position.  
4.Set the fan speed control to the  
desired speed.  
5.If dehumidified heating is desired,  
turn the air conditioning system (if  
equipped) on.  
position.  
OQL048321L  
Press the climate information screen  
selection button to display climate  
information on the screen.  
• If the windshield fogs up, set the  
mode to the  
or  
position.  
4 162  
Features of your vehicle  
Air conditioning system operation tips  
Air conditioning (if equipped)  
All Kia Air Conditioning Systems are  
filled with R-1234yf refrigerant.  
1.Start the engine. Press the air con-  
ditioning button.  
CAUTION - Excessive A/C  
Use  
• If the vehicle has been parked in  
direct sunlight during hot weather,  
open the windows for a short time  
to let the hot air inside the vehicle  
escape.  
To help reduce moisture inside of  
the windows on rainy or humid  
days, decrease the humidity inside  
the vehicle by operating the air  
conditioning system.  
• During air conditioning system  
operation, you may occasionally  
notice a slight change in engine  
speed as the air conditioning com-  
pressor cycles. This is a normal  
system operation characteristic.  
• Use the air conditioning system  
every month only for a few minutes  
to ensure maximum system per-  
formance.  
When using the air conditioning  
system, monitor the tempera-  
ture gauge closely while driving  
up hills or in heavy traffic when  
outside temperatures are high.  
Air conditioning system opera-  
tion may cause engine over-  
heating. Continue to use the  
blower fan but turn the air con-  
ditioning system off if the tem-  
perature gauge indicates engine  
overheating.  
2.Set the mode to the  
position.  
3.Set the air intake control to the out-  
side air or recirculated air position.  
4.Adjust the fan speed control and  
temperature control to maintain  
maximum comfort.  
• When maximum cooling is desired,  
set the temperature control to the  
extreme left position, set the mode  
control to the MAX A/C position,  
then set the fan speed control to  
the highest speed.  
NOTICE  
When opening the windows in  
humid weather, air conditioning  
may create water droplets inside the  
vehicle. Since excessive water  
droplets may cause damage to elec-  
trical equipment, air conditioning  
should only be used with the win-  
dows closed.  
4 163  
Features of your vehicle  
• When using the air conditioning  
system, you may notice clear water  
dripping (or even puddling) on the  
ground under the passenger side  
of the vehicle. This is a normal sys-  
tem operation characteristic.  
• Operating the air conditioning sys-  
tem in the recirculated air position  
provides maximum cooling, how-  
ever, continual operation in this  
mode may cause the air inside the  
vehicle to become stale.  
• During cooling operation, you may  
occasionally notice a misty air flow  
because of rapid cooling and  
humid air intake. This is a normal  
system operation characteristic.  
Climate control air filter  
NOTICE  
• Replace the filter according to the  
maintenance schedule.  
Outside air  
If the vehicle is being driven in  
severe conditions such as dusty or  
rough roads, more frequent air  
conditioner filter inspections and  
changes are required.  
Recirculated  
air  
• When the air flow rate suddenly  
decreases, the system should be  
checked at an authorized Kia  
dealer.  
Blower  
Heater core  
Climate control  
air filter  
Evaporator  
core  
1LDA5047  
The climate control air filter installed  
behind the glove box filters the dust or  
other pollutants that come into the  
vehicle from the outside through the  
heating and air conditioning system. If  
dust or other pollutants accumulate in  
the filter over a period of time, the air  
flow from the air vents may decrease,  
resulting in moisture accumulation on  
the inside of the windshield even  
when the outside (fresh) air position is  
selected. If this happens, have the cli-  
mate control air filter replaced by an  
authorized Kia dealer.  
4 164  
Features of your vehicle  
Checking the amount of air  
conditioner refrigerant and  
compressor lubricant  
When the amount of refrigerant is  
low, the performance of the air condi-  
tioning is reduced. Overfilling also  
has a negative impact on the air con-  
ditioning system.  
CAUTION  
WARNING - Vehicles  
equipped with R-1234yf  
It is important that the correct  
type and amount of oil and refrig-  
erant is used, otherwise damage  
to the vehicle may occur. To pre-  
vent damage, the air conditioning  
system in your vehicle should  
only be serviced by trained and  
certified technicians.  
Because the refriger-  
ant is mildly inflam-  
mable and at very  
high pressure, the air  
conditioning system  
should only be serv-  
Therefore, if abnormal operation is  
found, have the system inspected by  
an authorized Kia dealer.  
iced by trained and  
certified technicians.  
It is important that the correct  
type and amount of oil and  
refrigerant is used.  
WARNING  
Otherwise, it may cause damage  
to the vehicle and bodily injury.  
The oil and refrigerant in your  
vehicle's air conditioning sys-  
tem is under very high pres-  
sure. If proper service proce-  
dures are not followed an explo-  
sion may result. To reduce the  
risk of serious injury or death,  
the air conditioning system in  
your vehicle should only be  
serviced by trained and certi-  
fied technicians.  
4 165