Get Exiting the vehicle Guide for Land Rover Evoque SUV 2020

Exiting the vehicle

Note: The fuel filler flap can be opened only

when the alarm is disarmed.

LOCKING AND ARMING THE ALARM.

CAUTION: No modifications or

additions should be made to the

anti-theft system. Such changes could

cause the system to malfunction.

LOCK CONFIRMATION

If you are uncertain whether the vehicle is

locked and armed (either by single or double

locking), press either the Smart Key lock

button or, if Keyless entry is fitted, touch an

exterior door handle lock sensor. The hazard

warning lamps will flash once to indicate and

confirm the current lock status.

There are two levels of security:

ꢀ

Single locking. With all doors and tailgate

closed, press the lock button on the Smart

Key once, to Single lock the vehicle and

activate the perimeter alarm. The alarm

LED in the instrument panel will start to

flash and the hazard warning lamps will

flash once to confirm locking. Power fold

mirrors will fold in (if enabled).

Note: If the vehicle is not already locked and

armed, pressing the lock button will single lock

the vehicle. Press again to double lock, if

required.

ꢀ

Double locking. A second press within

three seconds will Double lock the vehicle

and activate the full alarm system. The

hazard warning lamps will flash a second

time to confirm the enhanced Double lock

state. An audible confirmation may also be

given. The audible warning can be

set/disabled via Audible Lock Warning in

the Vehicle Settings menu. See 56,

VEHICLE INFORMATION AND SETTINGS

MENU.

SINGLE LOCKING

Single locking secures the vehicle and prevents

the doors from being opened from outside. The

doors may still be unlocked and opened using

the interior door locks and release levers. In

this state, only the perimeter (exterior) alarm is

activated. When the vehicle is Single locked

and the alarm is armed, the alarm will sound if:

ꢀ

The bonnet, tailgate or a door is opened.

The vehicle will not lock if a door, the

tailgate or the bonnet aperture is open,

or the ignition is ON. No lamps will flash

and if the lock request is via the Smart

Key, there will be an audible mislock

warning.

In some markets where a battery backed

sounder is fitted the following actions will also

sound the alarm:

ꢀ

The vehicle battery is disconnected.

An attempt is made to disconnect the alarm

siren.

Ensure that the Smart Key does not

remain in the vehicle prior to closure. If

the vehicle is in an area of localised RF

interference or the Smart Key is

shielded by metal objects, the vehicle

may close and lock with no means of

opening again.

Note: Single locking should be used in

circumstances such as travelling on a ferry, if

pets are to be left in the vehicle, or if a window

must be left open.

Remove any additional Smart Keys

from the vehicle before locking.

Exiting the vehicle

DOUBLE LOCKING

MISLOCK

When locking the vehicle with the Smart Key, if

one or more of the doors, the bonnet or the

tailgate is not fully closed, or the ignition is ON,

the vehicle will NOT lock and there will be an

audible mislock error warning. The hazard

warning lamps will NOT flash and the door

mirrors (if enabled) will NOT fold in. Check that

all doors, the bonnet and the tailgate are closed

properly. Ensure the ignition is turned OFF and

lock the vehicle again. If the mislock persists,

consult a Land Rover Dealer/Authorised

Repairer.

Never double lock the vehicle with

people, children, or pets inside. In the

event of an emergency they would be

unable to escape and the emergency

services would be unable to release

them quickly.

Double locking secures the vehicle and

prevents the doors being opened from inside

or outside of the vehicle. The doors cannot be

unlocked or opened from inside the vehicle

when double locked.

This provides additional security if the vehicle

is left unattended. The vehicle cannot be

opened by breaking a window and operating

the interior door locks and release levers.

GLOBAL CLOSING

Ensure that no children, pets, or

obstructions are in any open aperture

before operating global closing.

Additionally, double locking also activates the

full alarm system with intrusion sensing

Ensure that all doors are closed. Press and

hold the Smart Key lock button for 3 seconds.

The vehicle will single lock and the alarm will be

armed immediately. After 3 seconds any open

windows will be closed.

(market dependent) and tilt sensing. When the

vehicle is Double locked the alarm will sound if:

ꢀ

The bonnet, tailgate or a door is opened.

Movement is detected within the vehicle

interior.

ꢀ

A window, front or rear screen or

panoramic sunroof glass is broken.

KEYLESS LOCKING

Never double lock the vehicle with

people, children or pets inside. In the

event of an emergency they would be

unable to escape and the emergency

services would be unable to release

them quickly.

The vehicle is raised or tilted.

In some markets where a battery backed

sounder is fitted the following actions will also

sound the alarm:

ꢀ

The vehicle battery is disconnected.

An attempt is made to disconnect the alarm

siren.

The Smart Key may not be detected if it

is placed within a metal container or if it

is shielded by a device with a back-lit

LCD screen, such as a smart phone,

laptop (including laptop bag), games

console etc.

Note: In this state, an open window may cause

the alarm to sound due to the movement of air

currents. For this reason, ensure all windows

are fully closed before double locking the

vehicle.

Exiting the vehicle

KEYLESS GLOBAL CLOSING

To initiate global window closing (if enabled),

touch and hold the lock sensor (1) for 3

seconds. This will also single lock the vehicle

and activate the alarm.

Note: The windows will close only while the

sensor (1) is covered. To fully secure the

vehicle, continue to touch the sensor until all

windows are fully closed.

DRIVE-AWAY LOCKING

Drive-away locking automatically locks all

doors at a set speed when the vehicle is in

motion. This feature can be enabled/disabled

via Drive-away locking in the Vehicle Settings

menu. See 56, VEHICLE INFORMATION AND

SETTINGS MENU.

The vehicle will not lock automatically.

Note: Keyless locking will activate only if the

Smart Key is detected outside the vehicle. If no

Smart Key is present, no locking will occur.

ꢀ

To single lock the vehicle, touch the lock

sensor (1) on a door handle once. The

hazard warning lamps will flash once to

confirm locking. Power fold mirrors will

fold in (if enabled).

SELECTING VALET MODE

Valet mode allows the vehicle to be driven, e.g.,

by a parking attendant, but leaves the tailgate

locked and restricts use of the touch screen.

This prevents access to telephone numbers,

navigation addresses and audio system

settings.

ꢀ

To double lock the vehicle, touch (1) twice

within 3 seconds. The hazard warning

lamps will flash twice to confirm (with a

long second flash). Power fold mirrors will

fold in (if enabled). An audible confirmation

may also be given (if enabled).

From the Home menu, select Valet:

Enter a four digit Personal identification

Number (PIN) (personally chosen). On

completion, touch the OK soft key.

Note: When locking the vehicle via Keyless

locking, if one or more of the doors, the bonnet

or the tailgate is not fully closed, or the ignition

is ON, the vehicle will NOT lock. There will be

NO audible mislock error warning. The hazard

warning lamps will NOT flash and the door

mirrors (if enabled) will NOT fold in. Check that

all doors, the bonnet and the tailgate are closed

properly. Ensure the ignition is turned OFF and

lock the vehicle again. If the mislock persists,

consult a Land Rover Dealer/Authorised

Repairer.

If you wish to cancel the PIN, select Delete.

After entering the PIN, you will be prompted to

enter the PIN again. Enter the same PIN and

touch OK to confirm.

A pop-up screen is displayed, confirming your

vehicle is now in Valet mode.

Exiting the vehicle

INTERIOR PROTECTION

DOOR LOCK AND RELEASE LEVERS

The interior protection feature of the full alarm

system may be temporarily disabled via Alarm

sensors in the Vehicle Settings menu. See 56,

VEHICLE INFORMATION AND SETTINGS

MENU.

Note: If the interior protection is temporarily

disabled, it will be automatically enabled the

next time the vehicle is double locked with the

Smart Key.

BATTERY-BACKED SOUNDER

In certain markets, a battery backed sounder is

fitted. This device will sound if it or the vehicle

battery is disconnected while the security

system is armed.

1. Press a locking lever to lock a door. Pull the

lever back to unlock. Operating either front

door locking levers will lock or unlock all

doors.

2. Pull a release lever to open a front door.

TILT SENSOR

To unlock and open a rear door, first

operate the lock lever, then pull the release

lever.

The tilt sensor detects any change to the

vehicle’s angle to the ground. When the alarm

is armed and the vehicle is double locked, any

change in the vehicle’s angle will activate the

tilt alarm.

3. Press the master unlock button to unlock

all doors and tailgate.

Note: The tilt sensors can be temporarily

disabled for the next time the vehicle is locked.

See Alarm Sensors, 56, VEHICLE

INFORMATION AND SETTINGS MENU. The

sensors will be automatically enabled the next

time the vehicle is double locked with the

Smart Key.

4. With all doors closed, press the master

lock button to lock all doors and tailgate.

Note: If the vehicle was locked with the Smart

Key, operating an interior door release lever

will unlock only that door. If the door is opened

the alarm will sound.

Note: If the vehicle has been double locked, the

interior door release levers will not operate.

The vehicle must be unlocked using the Smart

Key.

Exiting the vehicle for Your Land Rover Evoque SUV 2020

Popular Manuals