Front seats
For the passenger seat of a Coupe model,
press the memory button to store the
current settings. If the seat adjustment is
subsequently changed, press the memory
button to restore the original settings.
MEMORY SEATS
Front seat positions can be saved to vehicle
memory.
Once you have adjusted the power operated
driver’s seat and the exterior mirrors, the
vehicle can memorise the settings for future
use. See 48, EXTERIOR MIRRORS.
EASY ENTRY/EXIT
When Easy entry/exit is configured, the driver’s
seat will automatically lower when the ignition
is switched off and the door release lever is
used. Upon returning to the vehicle, when the
driver’s door is closed and the seat belt is
fastened, the seat will return to it’s previously
set position.
Note: Some vehicle specifications require the
ignition to be turned on.
See 56, VEHICLE INFORMATION AND
SETTINGS MENU.
HEAD RESTRAINTS
1. On the driver’s seat, press the memory
store button to activate the memory
function. The switch indicator will
illuminate.
Adjust the head restraint so that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
event of a collision.
2. Press one of the preset buttons within 5
seconds to memorise the current settings.
Memory (1, 2 or 3) Settings Saved will be
displayed on the message centre,
accompanied by an audible chime to
confirm the settings have been saved to
memory.
Do not drive, or carry passengers with
the head restraints removed from
occupied seats. The absence of a
correctly adjusted head restraint
increases the risk of neck injury in the
event of a collision.
Note: A seat position will be saved to
memory only during the 5 second active
period.
Never adjust the head restraints while
the vehicle is in motion.
Note: Any existing settings will be
over-written when a new position is saved
to memory.
Always store a removed head restraint
securely.
To recall a saved position, press the
relevant preset button (2). Memory (1, 2 or
3) Recalled will be displayed in the
message centre.
19
