Get Heating and ventilation Guide for Land Rover Evoque SUV 2020

Heating and ventilation

CONTROLS

1. Temperature controls. For individual

driver/passenger settings.

Timed climate controls the optional auxiliary

heater and can be set in the touch screen. See

65, TIMED CLIMATE.

2. Maximum defrost program.

3. Air distribution.

AUTO MODE

Note: More than one setting may be

selected at a time to achieve the desired

distribution.

AUTO mode should be used as the normal

operating mode. The air conditioning, heating

and ventilation controls automatically provide

an optimum environment at the selected

temperature.

4. AUTO mode. For fully automatic operation.

5. Heated windscreen.

6. Heated rear screen.

To resume fully automatic operation at any

time, press the AUTO button.

7. Front seat heaters.

8. Recirculation. Press repeatedly to cycle

through options.

TEMPERATURE CONTROLS

Rotate to set a temperature.

9. Air conditioning.

Note: The maximum possible temperature

differential between the driver and passenger

settings is 4°C (7°F).

10. Blower speed control. In manual mode

current speed selection is indicated by

illuminated LED’s.

Note: The indicator lights in the switches will

illuminate when the function is selected.

MAXIMUM DEFROST

Press to remove frost or heavy misting from

the front screen. The system will adjust the

front blower output for maximum clearing. In

addition the rear screen and optional front

screen heaters will be activated.

Note: In low temperatures it is advisable to

close the centre face level vent and direct air

flow from the outer face level vents towards the

side windows. This will help to keep the

windows clear of ice.

Press again to switch off defrost mode. The

screen heaters will remain on.

Heating and ventilation

AIR DISTRIBUTION CONTROL

RECIRCULATION WITH POLLUTION

AND HUMIDITY SENSING

An LED will illuminate in the selected switches.

ꢀ

Press the AUTO button briefly to activate

timed recirculation. The AUTO LED will

illuminate. The system automatically

selects fresh and recirculated air

dependent on pollution and cabin

humidity.

HEATED SCREENS

Press to operate the required screen heater.

The screen heater(s) will operate for a

predetermined timed period before

automatically switching off.

ꢀ

Press and hold the AUTO button to activate

latched recirculation. The AUTO LED will

flash and then illuminate constantly.

Do not attach labels to the rear screen.

Do not scrape or use abrasive materials

to clean the inside of the screen.

Press the MAN button briefly. The MAN

LED will illuminate. Recirculation mode is

selected permanently.

FRONT SEAT HEATERS

Press the relevant button to operate the

required seat heater at high level. Three

indicators will illuminate.

To cancel recirculation, press a button

briefly.

Press a second time to heat the seat at a

medium level. Two indicators will illuminate.

WATER DEPOSITS

The climate control system removes moisture

from the air and deposits the excess water

beneath the vehicle. Puddles may form but this

is normal and is no cause for concern.

Press a third time to heat the seat at the lowest

level. One indicator will illuminate.

Press a fourth time to switch off.

Note: Seat heaters consume a great amount of

battery power. They will operate only when the

engine is running.

HEATED MIRRORS

The rear view door mirror heaters operate

automatically according to the external

temperature and windscreen wiper operation.

RECIRCULATION

ꢀ

Press briefly to activate timed

recirculation. The button indicator

illuminates when recirculation is on.

TIMED CLIMATE

Timed climate can provide a comfortable

temperature inside the cabin in advance of

driver and passenger entering. Dependent on

the external temperature, the system either

draws in fresh air to cool the cabin or operates

an auxiliary heater to warm it. Timed climate is

controlled from the touch screen or from a

remote control.

Press and hold the button to activate

latched recirculation. The button indicator

will flash and then illuminate constantly.

To cancel recirculation, press the button

briefly.

Note: Prolonged use at low temperatures may

cause the windows to mist.

Heating and ventilation

AUXILIARY HEATER

Your vehicle may be fitted with an auxiliary

heater which is powered by fuel drawn from the

vehicle's tank. The heater operates only at low

ambient temperatures and is controlled by the

Timed climate control system or the heater

remote control.

When the heater is operating exhaust fumes

from the heater may be visible under the front

of the vehicle. This is normal and not a cause

for concern.

The auxiliary heater is also operated to warm

the engine and aid starting in very cold

conditions.

To set a timed climate program:

1. Press the HOME MENU hard key.

2. Touch the Timed Climate soft key. This

soft key may be set on a personal shortcut

or accessed via the Extra Features soft

key. Select the day for which you want to

set a programme or select All Week to

select the same start time for every day.

Do not operate the auxiliary heater

when refuelling the vehicle. Doing so

may cause fuel vapours to combust

causing a fire/explosion.

Do not operate the auxiliary heater

while the vehicle is in an enclosed

space. Doing so can cause a build up

of highly toxic fumes which may cause

unconsciousness or death.

3. Touch the Timer 1 or Timer 2 icon. The

timers can be toggled between on and off

using the power soft key.

4. Touch the up or down arrows to set the

start time. Hours and minutes are adjusted

separately.

TIMED CLIMATE CONTROL VIA THE

TOUCH SCREEN

5. Touch OK.

The touch screen can be used to either preset

activation times or to operate the system

manually.

The screen will display the activation time. If

required, set the time for the other timer using

the same process.

The system can be programmed to operate up

to seven days in advance and once or twice in

any 24 hour period. If the vehicle is used each

day the system will continue to operate each

day until cancelled. If the vehicle is not used for

24 hours, this cycle will be cancelled.

Note: The time format, 12/24 hour clock, is

determined by the time settings currently

selected in the System settings menu. 56,

VEHICLE INFORMATION AND SETTINGS

When the system is operating, the LED in the

climate control AUTO button will flash.

Note: The system will cease operation if the

engine is started.

Heating and ventilation

A current heating cycle will be cancelled if the

engine is started. Any programmed heating

cycle may be cancelled by touching the

relevant power soft key on the timer set up

menu or the Power soft key on the Timed

Climate information home menu.

The system may not operate, or will switch off

automatically, if:

ꢀ

Fuel level is low.

The vehicle’s battery charge is low.

Engine coolant temperature is at or above

its required temperature.

ꢀ

The engine has not been started since the

last programme cycle.

TIMED CLIMATE REMOTE CONTROL

The dedicated remote control has a range of

approximately 100m (328ft). Press and hold

the ON button for two seconds.

The remote control LED indicator signals other

states and conditions for the timed climate as

follows:

Note: Avoid touching the antenna when

operating the ON or OFF button.

ꢀ

Illuminates red for 2 seconds when the

OFF button is pressed, to indicate that the

program has stopped.

ꢀ

Flashes green or red for 2 seconds then

stops when the ON or OFF buttons are

pressed, to indicate that no action has been

taken.

ꢀ

Illuminates orange for 2 seconds before

showing green or red, to indicate that the

remote battery is low.

Flashes orange for 5 seconds to indicate

that no action has been taken and the

remote battery should be replaced.

1. On button.

REPLACING REMOTE CONTROL

BATTERIES

2. Off button.

3. LED (operation indicator).

4. Antenna.

Press and hold the ON button for

approximately two seconds. The green LED will

illuminate for 2 seconds to confirm that a

program has been initiated. The LED flashes

once every 2 seconds to indicate that the

program is active.

The timed climate program will continue for 30

minutes and then switch off automatically to

prevent the vehicle battery from discharging. It

also turns off automatically if the engine is

started.

Heating and ventilation

With the back of the remote control facing

upwards, use a coin or similar implement to

rotate the battery cover. Lift the cover off to

reveal the battery compartment. Remove the

old battery and, ensuring that the correct

polarity is maintained, insert a replacement 3.3

volt, CR1/3N battery. Replace the cover and

rotate it to lock it closed.

ADDITIONAL REMOTE CONTROLS

A maximum of three controls can be

programmed to each vehicle. Contact your

Land Rover dealer to purchase additional units

and have them programmed to your vehicle.

Heating and ventilation for Your Land Rover Evoque SUV 2020

Popular Manuals